Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 74 insertions, 0 deletions

diff --git a/net/llc/llc_output.c b/net/llc/llc_output.c
new file mode 100644
index 000000000..5a6466fc6
--- /dev/null
+++ b/net/llc/llc_output.c
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * llc_output.c - LLC minimal output path
+ *
+ * Copyright (c) 1997 by Procom Technology, Inc.
+ * 		 2001-2003 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ */
+
+#include <linux/if_arp.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/export.h>
+#include <net/llc.h>
+#include <net/llc_pdu.h>
+
+/**
+ *	llc_mac_hdr_init - fills MAC header fields
+ *	@skb: Address of the frame to initialize its MAC header
+ *	@sa: The MAC source address
+ *	@da: The MAC destination address
+ *
+ *	Fills MAC header fields, depending on MAC type. Returns 0, If MAC type
+ *	is a valid type and initialization completes correctly 1, otherwise.
+ */
+int llc_mac_hdr_init(struct sk_buff *skb,
+		     const unsigned char *sa, const unsigned char *da)
+{
+	int rc = -EINVAL;
+
+	switch (skb->dev->type) {
+	case ARPHRD_ETHER:
+	case ARPHRD_LOOPBACK:
+		rc = dev_hard_header(skb, skb->dev, ETH_P_802_2, da, sa,
+				     skb->len);
+		if (rc > 0)
+			rc = 0;
+		break;
+	default:
+		break;
+	}
+	return rc;
+}
+
+/**
+ *	llc_build_and_send_ui_pkt - unitdata request interface for upper layers
+ *	@sap: sap to use
+ *	@skb: packet to send
+ *	@dmac: destination mac address
+ *	@dsap: destination sap
+ *
+ *	Upper layers calls this function when upper layer wants to send data
+ *	using connection-less mode communication (UI pdu).
+ *
+ *	Accept data frame from network layer to be sent using connection-
+ *	less mode communication; timeout/retries handled by network layer;
+ *	package primitive as an event and send to SAP event handler
+ */
+int llc_build_and_send_ui_pkt(struct llc_sap *sap, struct sk_buff *skb,
+			      const unsigned char *dmac, unsigned char dsap)
+{
+	int rc;
+	llc_pdu_header_init(skb, LLC_PDU_TYPE_U, sap->laddr.lsap,
+			    dsap, LLC_PDU_CMD);
+	llc_pdu_init_as_ui_cmd(skb);
+	rc = llc_mac_hdr_init(skb, skb->dev->dev_addr, dmac);
+	if (likely(!rc))
+		rc = dev_queue_xmit(skb);
+	else
+		kfree_skb(skb);
+	return rc;
+}
+
+EXPORT_SYMBOL(llc_mac_hdr_init);
+EXPORT_SYMBOL(llc_build_and_send_ui_pkt);