Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 58 insertions, 0 deletions

diff --git a/net/hsr/Kconfig b/net/hsr/Kconfig
new file mode 100644
index 000000000..fcacdf4f0
--- /dev/null
+++ b/net/hsr/Kconfig
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# IEC 62439-3 High-availability Seamless Redundancy
+#
+
+config HSR
+	tristate "High-availability Seamless Redundancy (HSR & PRP)"
+	help
+	  This enables IEC 62439 defined High-availability Seamless
+	  Redundancy (HSR) and Parallel Redundancy Protocol (PRP).
+
+	  If you say Y here, then your Linux box will be able to act as a
+	  DANH ("Doubly attached node implementing HSR") or DANP ("Doubly
+	  attached node implementing PRP"). For this to work, your Linux box
+	  needs (at least) two physical Ethernet interfaces.
+
+	  For DANH, it must be connected as a node in a ring network together
+	  with other HSR capable nodes. All Ethernet frames sent over the HSR
+	  device will be sent in both directions on the ring (over both slave
+	  ports), giving a redundant, instant fail-over network. Each HSR node
+	  in the ring acts like a bridge for HSR frames, but filters frames
+	  that have been forwarded earlier.
+
+	  For DANP, it must be connected as a node connecting to two
+	  separate networks over the two slave interfaces. Like HSR, Ethernet
+	  frames sent over the PRP device will be sent to both networks giving
+	  a redundant, instant fail-over network. Unlike HSR, PRP networks
+	  can have Singly Attached Nodes (SAN) such as PC, printer, bridges
+	  etc and will be able to communicate with DANP nodes.
+
+	  This code is a "best effort" to comply with the HSR standard as
+	  described in IEC 62439-3:2010 (HSRv0) and IEC 62439-3:2012 (HSRv1),
+	  and PRP standard described in IEC 62439-4:2012 (PRP), but no
+	  compliancy tests have been made. Use iproute2 to select the protocol
+	  you would like to use.
+
+	  You need to perform any and all necessary tests yourself before
+	  relying on this code in a safety critical system!
+
+	  If unsure, say N.
+
+if HSR
+
+config PRP_DUP_DISCARD_KUNIT_TEST
+	tristate "PRP duplicate discard KUnit tests" if !KUNIT_ALL_TESTS
+	depends on KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  Covers the PRP duplicate discard algorithm.
+	  Only useful for kernel devs running KUnit test harness and are not
+	  for inclusion into a production build.
+
+	  For more information on KUnit and unit tests in general please refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+	  If unsure, say N.
+
+endif