Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 58 insertions, 0 deletions

diff --git a/net/hsr/Kconfig b/net/hsr/Kconfig
new file mode 100644
index 000000000..fcacdf4f0
--- /dev/null
+++ b/net/hsr/Kconfig
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# IEC 62439-3 High-availability Seamless Redundancy
+#
+
+config HSR
+	tristate "High-availability Seamless Redundancy (HSR & PRP)"
+	help
+	  This enables IEC 62439 defined High-availability Seamless
+	  Redundancy (HSR) and Parallel Redundancy Protocol (PRP).
+
+	  If you say Y here, then your Linux box will be able to act as a
+	  DANH ("Doubly attached node implementing HSR") or DANP ("Doubly
+	  attached node implementing PRP"). For this to work, your Linux box
+	  needs (at least) two physical Ethernet interfaces.
+
+	  For DANH, it must be connected as a node in a ring network together
+	  with other HSR capable nodes. All Ethernet frames sent over the HSR
+	  device will be sent in both directions on the ring (over both slave
+	  ports), giving a redundant, instant fail-over network. Each HSR node
+	  in the ring acts like a bridge for HSR frames, but filters frames
+	  that have been forwarded earlier.
+
+	  For DANP, it must be connected as a node connecting to two
+	  separate networks over the two slave interfaces. Like HSR, Ethernet
+	  frames sent over the PRP device will be sent to both networks giving
+	  a redundant, instant fail-over network. Unlike HSR, PRP networks
+	  can have Singly Attached Nodes (SAN) such as PC, printer, bridges
+	  etc and will be able to communicate with DANP nodes.
+
+	  This code is a "best effort" to comply with the HSR standard as
+	  described in IEC 62439-3:2010 (HSRv0) and IEC 62439-3:2012 (HSRv1),
+	  and PRP standard described in IEC 62439-4:2012 (PRP), but no
+	  compliancy tests have been made. Use iproute2 to select the protocol
+	  you would like to use.
+
+	  You need to perform any and all necessary tests yourself before
+	  relying on this code in a safety critical system!
+
+	  If unsure, say N.
+
+if HSR
+
+config PRP_DUP_DISCARD_KUNIT_TEST
+	tristate "PRP duplicate discard KUnit tests" if !KUNIT_ALL_TESTS
+	depends on KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  Covers the PRP duplicate discard algorithm.
+	  Only useful for kernel devs running KUnit test harness and are not
+	  for inclusion into a production build.
+
+	  For more information on KUnit and unit tests in general please refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+	  If unsure, say N.
+
+endif