Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 224 insertions, 0 deletions

diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
new file mode 100644
index 000000000..d5e725b90
--- /dev/null
+++ b/net/dsa/Kconfig
@@ -0,0 +1,224 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+menuconfig NET_DSA
+	tristate "Distributed Switch Architecture"
+	depends on BRIDGE || BRIDGE=n
+	depends on HSR || HSR=n
+	depends on INET && NETDEVICES
+	select GRO_CELLS
+	select NET_SWITCHDEV
+	select PHYLINK
+	select NET_DEVLINK
+	imply NET_SELFTESTS
+	help
+	  Say Y if you want to enable support for the hardware switches supported
+	  by the Distributed Switch Architecture.
+
+if NET_DSA
+
+# Drivers must select the appropriate tagging format(s)
+
+config NET_DSA_TAG_NONE
+	tristate "No-op tag driver"
+	help
+	  Say Y or M if you want to enable support for switches which don't tag
+	  frames over the CPU port.
+
+config NET_DSA_TAG_AR9331
+	tristate "Tag driver for Atheros AR9331 SoC with built-in switch"
+	help
+	  Say Y or M if you want to enable support for tagging frames for
+	  the Atheros AR9331 SoC with built-in switch.
+
+config NET_DSA_TAG_BRCM_COMMON
+	tristate
+	default n
+
+config NET_DSA_TAG_BRCM
+	tristate "Tag driver for Broadcom switches using in-frame headers"
+	select NET_DSA_TAG_BRCM_COMMON
+	help
+	  Say Y if you want to enable support for tagging frames for the
+	  Broadcom switches which place the tag after the MAC source address.
+
+config NET_DSA_TAG_BRCM_LEGACY
+	tristate "Tag driver for BCM63xx legacy switches using in-frame headers"
+	select NET_DSA_TAG_BRCM_COMMON
+	help
+	  Say Y if you want to enable support for tagging frames for the
+	  BCM63xx legacy switches which place the tag after the MAC source
+	  address.
+	  This tag is used in BCM63xx legacy switches which work without the
+	  original FCS and length before the tag insertion.
+
+config NET_DSA_TAG_BRCM_LEGACY_FCS
+	tristate "Tag driver for BCM53xx legacy switches using in-frame headers"
+	select NET_DSA_TAG_BRCM_COMMON
+	help
+	  Say Y if you want to enable support for tagging frames for the
+	  BCM53xx legacy switches which place the tag after the MAC source
+	  address.
+	  This tag is used in BCM53xx legacy switches which expect original
+	  FCS and length before the tag insertion to be present.
+
+config NET_DSA_TAG_BRCM_PREPEND
+	tristate "Tag driver for Broadcom switches using prepended headers"
+	select NET_DSA_TAG_BRCM_COMMON
+	help
+	  Say Y if you want to enable support for tagging frames for the
+	  Broadcom switches which places the tag before the Ethernet header
+	  (prepended).
+
+config NET_DSA_TAG_HELLCREEK
+	tristate "Tag driver for Hirschmann Hellcreek TSN switches"
+	help
+	  Say Y or M if you want to enable support for tagging frames
+	  for the Hirschmann Hellcreek TSN switches.
+
+config NET_DSA_TAG_GSWIP
+	tristate "Tag driver for Lantiq / Intel GSWIP switches"
+	help
+	  Say Y or M if you want to enable support for tagging frames for the
+	  Lantiq / Intel GSWIP switches.
+
+config NET_DSA_TAG_DSA_COMMON
+	tristate
+
+config NET_DSA_TAG_DSA
+	tristate "Tag driver for Marvell switches using DSA headers"
+	select NET_DSA_TAG_DSA_COMMON
+	help
+	  Say Y or M if you want to enable support for tagging frames for the
+	  Marvell switches which use DSA headers.
+
+config NET_DSA_TAG_EDSA
+	tristate "Tag driver for Marvell switches using EtherType DSA headers"
+	select NET_DSA_TAG_DSA_COMMON
+	help
+	  Say Y or M if you want to enable support for tagging frames for the
+	  Marvell switches which use EtherType DSA headers.
+
+config NET_DSA_TAG_MTK
+	tristate "Tag driver for Mediatek switches"
+	help
+	  Say Y or M if you want to enable support for tagging frames for
+	  Mediatek switches.
+
+config NET_DSA_TAG_MXL_862XX
+	tristate "Tag driver for MaxLinear MxL862xx switches"
+	help
+	  Say Y or M if you want to enable support for tagging frames for the
+	  MaxLinear MxL86252 and MxL86282 switches using their native 8-byte
+	  tagging protocol.
+
+config NET_DSA_TAG_MXL_GSW1XX
+	tristate "Tag driver for MaxLinear GSW1xx switches"
+	help
+	  The GSW1xx family of switches supports an 8-byte special tag which
+	  can be used on the CPU port of the switch.
+	  Say Y or M if you want to enable support for tagging frames for
+	  MaxLinear GSW1xx switches.
+
+config NET_DSA_TAG_KSZ
+	tristate "Tag driver for Microchip 8795/937x/9477/9893 families of switches"
+	help
+	  Say Y if you want to enable support for tagging frames for the
+	  Microchip 8795/937x/9477/9893 families of switches.
+
+config NET_DSA_TAG_NETC
+	tristate "Tag driver for NXP NETC switches"
+	help
+	  Say Y or M if you want to enable support for the NXP Switch Tag (NST),
+	  as implemented by NXP NETC switches having version 4.3 or later. The
+	  switch tag is a proprietary header added to frames after the source
+	  MAC address, it has 3 types and each type has different subtypes, so
+	  its length depends on the type and subtype of the tag, the maximum
+	  length is 14 bytes.
+
+config NET_DSA_TAG_OCELOT
+	tristate "Tag driver for Ocelot family of switches, using NPI port"
+	select PACKING
+	help
+	  Say Y or M if you want to enable NPI tagging for the Ocelot switches
+	  (VSC7511, VSC7512, VSC7513, VSC7514, VSC9953, VSC9959). In this mode,
+	  the frames over the Ethernet CPU port are prepended with a
+	  hardware-defined injection/extraction frame header.  Flow control
+	  (PAUSE frames) over the CPU port is not supported when operating in
+	  this mode.
+
+config NET_DSA_TAG_OCELOT_8021Q
+	tristate "Tag driver for Ocelot family of switches, using VLAN"
+	help
+	  Say Y or M if you want to enable support for tagging frames with a
+	  custom VLAN-based header. Frames that require timestamping, such as
+	  PTP, are not delivered over Ethernet but over register-based MMIO.
+	  Flow control over the CPU port is functional in this mode. When using
+	  this mode, less TCAM resources (VCAP IS1, IS2, ES0) are available for
+	  use with tc-flower.
+
+config NET_DSA_TAG_QCA
+	tristate "Tag driver for Qualcomm Atheros QCA8K switches"
+	help
+	  Say Y or M if you want to enable support for tagging frames for
+	  the Qualcomm Atheros QCA8K switches.
+
+config NET_DSA_TAG_RTL4_A
+	tristate "Tag driver for Realtek 4 byte protocol A tags"
+	help
+	  Say Y or M if you want to enable support for tagging frames for the
+	  Realtek switches with 4 byte protocol A tags, such as found in
+	  the Realtek RTL8366RB.
+
+config NET_DSA_TAG_RTL8_4
+	tristate "Tag driver for Realtek 8 byte protocol 4 tags"
+	help
+	  Say Y or M if you want to enable support for tagging frames for Realtek
+	  switches with 8 byte protocol 4 tags, such as the Realtek RTL8365MB-VC.
+
+config NET_DSA_TAG_RZN1_A5PSW
+	tristate "Tag driver for Renesas RZ/N1 A5PSW switch"
+	help
+	  Say Y or M if you want to enable support for tagging frames for
+	  Renesas RZ/N1 embedded switch that uses an 8 byte tag located after
+	  destination MAC address.
+
+config NET_DSA_TAG_LAN9303
+	tristate "Tag driver for SMSC/Microchip LAN9303 family of switches"
+	help
+	  Say Y or M if you want to enable support for tagging frames for the
+	  SMSC/Microchip LAN9303 family of switches.
+
+config NET_DSA_TAG_SJA1105
+	tristate "Tag driver for NXP SJA1105 switches"
+	select PACKING
+	help
+	  Say Y or M if you want to enable support for tagging frames with the
+	  NXP SJA1105 switch family. Both the native tagging protocol (which
+	  is only for link-local traffic) as well as non-native tagging (based
+	  on a custom 802.1Q VLAN header) are available.
+
+config NET_DSA_TAG_TRAILER
+	tristate "Tag driver for switches using a trailer tag"
+	help
+	  Say Y or M if you want to enable support for tagging frames at
+	  with a trailed. e.g. Marvell 88E6060.
+
+config NET_DSA_TAG_VSC73XX_8021Q
+	tristate "Tag driver for Microchip/Vitesse VSC73xx family of switches, using VLAN"
+	help
+	  Say Y or M if you want to enable support for tagging frames with a
+	  custom VLAN-based header.
+
+config NET_DSA_TAG_XRS700X
+	tristate "Tag driver for XRS700x switches"
+	help
+	  Say Y or M if you want to enable support for tagging frames for
+	  Arrow SpeedChips XRS700x switches that use a single byte tag trailer.
+
+config NET_DSA_TAG_YT921X
+	tristate "Tag driver for Motorcomm YT921x switches"
+	help
+	  Say Y or M if you want to enable support for tagging frames for
+	  Motorcomm YT921x switches.
+
+endif