Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 73 insertions, 0 deletions

diff --git a/net/can/Kconfig b/net/can/Kconfig
new file mode 100644
index 000000000..abbb4be7a
--- /dev/null
+++ b/net/can/Kconfig
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Controller Area Network (CAN) network layer core configuration
+#
+
+menuconfig CAN
+	tristate "CAN bus subsystem support"
+	select SKB_EXTENSIONS
+	help
+	  Controller Area Network (CAN) is a slow (up to 1Mbit/s) serial
+	  communications protocol. Development of the CAN bus started in
+	  1983 at Robert Bosch GmbH, and the protocol was officially
+	  released in 1986. The CAN bus was originally mainly for automotive,
+	  but is now widely used in marine (NMEA2000), industrial, and medical
+	  applications. More information on the CAN network protocol family
+	  PF_CAN is contained in <Documentation/networking/can.rst>.
+
+	  If you want CAN support you should say Y here and also to the
+	  specific driver for your controller(s) under the Network device
+	  support section.
+
+if CAN
+
+config CAN_RAW
+	tristate "Raw CAN Protocol (raw access with CAN-ID filtering)"
+	default y
+	help
+	  The raw CAN protocol option offers access to the CAN bus via
+	  the BSD socket API. You probably want to use the raw socket in
+	  most cases where no higher level protocol is being used. The raw
+	  socket has several filter options e.g. ID masking / error frames.
+	  To receive/send raw CAN messages, use AF_CAN with protocol CAN_RAW.
+
+config CAN_BCM
+	tristate "Broadcast Manager CAN Protocol (with content filtering)"
+	default y
+	help
+	  The Broadcast Manager offers content filtering, timeout monitoring,
+	  sending of RTR frames, and cyclic CAN messages without permanent user
+	  interaction. The BCM can be 'programmed' via the BSD socket API and
+	  informs you on demand e.g. only on content updates / timeouts.
+	  You probably want to use the bcm socket in most cases where cyclic
+	  CAN messages are used on the bus (e.g. in automotive environments).
+	  To use the Broadcast Manager, use AF_CAN with protocol CAN_BCM.
+
+config CAN_GW
+	tristate "CAN Gateway/Router (with netlink configuration)"
+	default y
+	help
+	  The CAN Gateway/Router is used to route (and modify) CAN frames.
+	  It is based on the PF_CAN core infrastructure for msg filtering and
+	  msg sending and can optionally modify routed CAN frames on the fly.
+	  CAN frames can be routed between CAN network interfaces (one hop).
+	  They can be modified with AND/OR/XOR/SET operations as configured
+	  by the netlink configuration interface known e.g. from iptables.
+
+source "net/can/j1939/Kconfig"
+
+config CAN_ISOTP
+	tristate "ISO 15765-2 CAN transport protocol"
+	help
+	  CAN Transport Protocols offer support for segmented Point-to-Point
+	  communication between CAN nodes via two defined CAN Identifiers.
+	  This protocol driver implements segmented data transfers for CAN CC
+	  (aka Classical CAN, CAN 2.0B) and CAN FD frame types which were
+	  introduced with ISO 15765-2:2016.
+	  As CAN frames can only transport a small amount of data bytes
+	  (max. 8 bytes for CAN CC and max. 64 bytes for CAN FD) this
+	  segmentation is needed to transport longer Protocol Data Units (PDU)
+	  as needed e.g. for vehicle diagnosis (UDS, ISO 14229) or IP-over-CAN
+	  traffic.
+
+endif