Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 148 insertions, 0 deletions

diff --git a/net/bluetooth/Kconfig b/net/bluetooth/Kconfig
new file mode 100644
index 000000000..1cda01614
--- /dev/null
+++ b/net/bluetooth/Kconfig
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Bluetooth subsystem configuration
+#
+
+menuconfig BT
+	tristate "Bluetooth subsystem support"
+	depends on !S390
+	depends on RFKILL || !RFKILL
+	select CRC16
+	select CRYPTO
+	select CRYPTO_LIB_AES
+	select CRYPTO_LIB_AES_CBC_MACS
+	select CRYPTO_ECDH
+	help
+	  Bluetooth is low-cost, low-power, short-range wireless technology.
+	  It was designed as a replacement for cables and other short-range
+	  technologies like IrDA.  Bluetooth operates in personal area range
+	  that typically extends up to 10 meters.  More information about
+	  Bluetooth can be found at <https://www.bluetooth.com/>.
+
+	  Linux Bluetooth subsystem consist of several layers:
+	     Bluetooth Core
+		HCI device and connection manager, scheduler
+		SCO audio links
+		L2CAP (Logical Link Control and Adaptation Protocol)
+		SMP (Security Manager Protocol) on LE (Low Energy) links
+		ISO isochronous links
+	     HCI Device drivers (Interface to the hardware)
+	     RFCOMM Module (RFCOMM Protocol)  
+	     BNEP Module (Bluetooth Network Encapsulation Protocol)
+	     HIDP Module (Human Interface Device Protocol)
+
+	  Say Y here to compile Bluetooth support into the kernel or say M to
+	  compile it as module (bluetooth).
+
+	  To use Linux Bluetooth subsystem, you will need several user-space
+	  utilities like hciconfig and bluetoothd.  These utilities and updates
+	  to Bluetooth kernel modules are provided in the BlueZ packages.  For
+	  more information, see <http://www.bluez.org/>.
+
+config BT_BREDR
+	bool "Bluetooth Classic (BR/EDR) features"
+	depends on BT
+	default y
+	help
+	  Bluetooth Classic includes support for Basic Rate (BR)
+	  available with Bluetooth version 1.0b or later and support
+	  for Enhanced Data Rate (EDR) available with Bluetooth
+	  version 2.0 or later.
+
+source "net/bluetooth/rfcomm/Kconfig"
+
+source "net/bluetooth/bnep/Kconfig"
+
+source "net/bluetooth/hidp/Kconfig"
+
+config BT_LE
+	bool "Bluetooth Low Energy (LE) features"
+	depends on BT
+	default y
+	help
+	  Bluetooth Low Energy includes support low-energy physical
+	  layer available with Bluetooth version 4.0 or later.
+
+config BT_LE_L2CAP_ECRED
+	bool "Bluetooth L2CAP Enhanced Credit Flow Control"
+	depends on BT_LE
+	default y
+	help
+	  Bluetooth Low Energy L2CAP Enhanced Credit Flow Control available with
+	  Bluetooth version 5.2 or later.
+
+	  This can be overridden by passing bluetooth.enable_ecred=[1|0]
+	  on the kernel commandline.
+
+config BT_6LOWPAN
+	tristate "Bluetooth 6LoWPAN support"
+	depends on BT && BT_LE && 6LOWPAN
+	help
+	  IPv6 compression over Bluetooth Low Energy.
+
+config BT_LEDS
+	bool "Enable LED triggers"
+	depends on BT
+	depends on LEDS_CLASS
+	select LEDS_TRIGGERS
+	help
+	  This option selects a few LED triggers for different
+	  Bluetooth events.
+
+config BT_MSFTEXT
+	bool "Enable Microsoft extensions"
+	depends on BT
+	help
+	  This options enables support for the Microsoft defined HCI
+	  vendor extensions.
+
+config BT_AOSPEXT
+	bool "Enable Android Open Source Project extensions"
+	depends on BT
+	help
+	  This options enables support for the Android Open Source
+	  Project defined HCI vendor extensions.
+
+config BT_DEBUGFS
+	bool "Export Bluetooth internals in debugfs"
+	depends on BT && DEBUG_FS
+	default y
+	help
+	  Provide extensive information about internal Bluetooth states
+	  in debugfs.
+
+config BT_SELFTEST
+	bool "Bluetooth self testing support"
+	depends on BT && DEBUG_KERNEL
+	help
+	  Run self tests when initializing the Bluetooth subsystem.  This
+	  is a developer option and can cause significant delay when booting
+	  the system.
+
+	  When the Bluetooth subsystem is built as module, then the test
+	  cases are run first thing at module load time.  When the Bluetooth
+	  subsystem is compiled into the kernel image, then the test cases
+	  are run late in the initcall hierarchy.
+
+config BT_SELFTEST_ECDH
+	bool "ECDH test cases"
+	depends on BT_LE && BT_SELFTEST
+	help
+	  Run test cases for ECDH cryptographic functionality used by the
+	  Bluetooth Low Energy Secure Connections feature.
+
+config BT_SELFTEST_SMP
+	bool "SMP test cases"
+	depends on BT_LE && BT_SELFTEST
+	help
+	  Run test cases for SMP cryptographic functionality, including both
+	  legacy SMP as well as the Secure Connections features.
+
+config BT_FEATURE_DEBUG
+	bool "Enable runtime option for debugging statements"
+	depends on BT && !DYNAMIC_DEBUG
+	help
+	  This provides an option to enable/disable debugging statements
+	  at runtime via the experimental features interface.
+
+source "drivers/bluetooth/Kconfig"