Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 184 insertions, 0 deletions

diff --git a/net/802/fddi.c b/net/802/fddi.c
new file mode 100644
index 000000000..e26f4549e
--- /dev/null
+++ b/net/802/fddi.c
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		FDDI-type device handling.
+ *
+ * Version:	@(#)fddi.c	1.0.0	08/12/96
+ *
+ * Authors:	Lawrence V. Stefani, <stefani@lkg.dec.com>
+ *
+ *		fddi.c is based on previous eth.c and tr.c work by
+ *			Ross Biro
+ *			Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *			Mark Evans, <evansmp@uhura.aston.ac.uk>
+ *			Florian La Roche, <rzsfl@rz.uni-sb.de>
+ *			Alan Cox, <gw4pts@gw4pts.ampr.org>
+ *
+ *	Changes
+ *		Alan Cox		:	New arp/rebuild header
+ *		Maciej W. Rozycki	:	IPv6 support
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/inet.h>
+#include <linux/netdevice.h>
+#include <linux/fddidevice.h>
+#include <linux/if_ether.h>
+#include <linux/skbuff.h>
+#include <linux/errno.h>
+#include <net/arp.h>
+#include <net/sock.h>
+
+/*
+ * Create the FDDI MAC header for an arbitrary protocol layer
+ *
+ * saddr=NULL	means use device source address
+ * daddr=NULL	means leave destination address (eg unresolved arp)
+ */
+
+static int fddi_header(struct sk_buff *skb, struct net_device *dev,
+		       unsigned short type,
+		       const void *daddr, const void *saddr, unsigned int len)
+{
+	int hl = FDDI_K_SNAP_HLEN;
+	struct fddihdr *fddi;
+
+	if(type != ETH_P_IP && type != ETH_P_IPV6 && type != ETH_P_ARP)
+		hl=FDDI_K_8022_HLEN-3;
+	fddi = skb_push(skb, hl);
+	fddi->fc			 = FDDI_FC_K_ASYNC_LLC_DEF;
+	if(type == ETH_P_IP || type == ETH_P_IPV6 || type == ETH_P_ARP)
+	{
+		fddi->hdr.llc_snap.dsap		 = FDDI_EXTENDED_SAP;
+		fddi->hdr.llc_snap.ssap		 = FDDI_EXTENDED_SAP;
+		fddi->hdr.llc_snap.ctrl		 = FDDI_UI_CMD;
+		fddi->hdr.llc_snap.oui[0]	 = 0x00;
+		fddi->hdr.llc_snap.oui[1]	 = 0x00;
+		fddi->hdr.llc_snap.oui[2]	 = 0x00;
+		fddi->hdr.llc_snap.ethertype	 = htons(type);
+	}
+
+	/* Set the source and destination hardware addresses */
+
+	if (saddr != NULL)
+		memcpy(fddi->saddr, saddr, dev->addr_len);
+	else
+		memcpy(fddi->saddr, dev->dev_addr, dev->addr_len);
+
+	if (daddr != NULL)
+	{
+		memcpy(fddi->daddr, daddr, dev->addr_len);
+		return hl;
+	}
+
+	return -hl;
+}
+
+/*
+ * Determine the packet's protocol ID and fill in skb fields.
+ * This routine is called before an incoming packet is passed
+ * up.  It's used to fill in specific skb fields and to set
+ * the proper pointer to the start of packet data (skb->data).
+ */
+
+__be16 fddi_type_trans(struct sk_buff *skb, struct net_device *dev)
+{
+	struct fddihdr *fddi = (struct fddihdr *)skb->data;
+	__be16 type;
+
+	/*
+	 * Set mac.raw field to point to FC byte, set data field to point
+	 * to start of packet data.  Assume 802.2 SNAP frames for now.
+	 */
+
+	skb->dev = dev;
+	skb_reset_mac_header(skb);	/* point to frame control (FC) */
+
+	if (skb->len < FDDI_K_8022_HLEN)
+		return htons(0);
+
+	if(fddi->hdr.llc_8022_1.dsap==0xe0)
+	{
+		skb_pull(skb, FDDI_K_8022_HLEN-3);
+		type = htons(ETH_P_802_2);
+	}
+	else
+	{
+		if (skb->len < FDDI_K_SNAP_HLEN)
+			return htons(0);
+		skb_pull(skb, FDDI_K_SNAP_HLEN);		/* adjust for 21 byte header */
+		type=fddi->hdr.llc_snap.ethertype;
+	}
+
+	/* Set packet type based on destination address and flag settings */
+
+	if (*fddi->daddr & 0x01)
+	{
+		if (memcmp(fddi->daddr, dev->broadcast, FDDI_K_ALEN) == 0)
+			skb->pkt_type = PACKET_BROADCAST;
+		else
+			skb->pkt_type = PACKET_MULTICAST;
+	}
+
+	else if (dev->flags & IFF_PROMISC)
+	{
+		if (memcmp(fddi->daddr, dev->dev_addr, FDDI_K_ALEN))
+			skb->pkt_type = PACKET_OTHERHOST;
+	}
+
+	/* Assume 802.2 SNAP frames, for now */
+
+	return type;
+}
+
+EXPORT_SYMBOL(fddi_type_trans);
+
+static const struct header_ops fddi_header_ops = {
+	.create		= fddi_header,
+};
+
+
+static void fddi_setup(struct net_device *dev)
+{
+	dev->header_ops		= &fddi_header_ops;
+	dev->type		= ARPHRD_FDDI;
+	dev->hard_header_len	= FDDI_K_SNAP_HLEN+3;	/* Assume 802.2 SNAP hdr len + 3 pad bytes */
+	dev->mtu		= FDDI_K_SNAP_DLEN;	/* Assume max payload of 802.2 SNAP frame */
+	dev->min_mtu		= FDDI_K_SNAP_HLEN;
+	dev->max_mtu		= FDDI_K_SNAP_DLEN;
+	dev->addr_len		= FDDI_K_ALEN;
+	dev->tx_queue_len	= 100;			/* Long queues on FDDI */
+	dev->flags		= IFF_BROADCAST | IFF_MULTICAST;
+
+	memset(dev->broadcast, 0xFF, FDDI_K_ALEN);
+}
+
+/**
+ * alloc_fddidev - Register FDDI device
+ * @sizeof_priv: Size of additional driver-private structure to be allocated
+ *	for this FDDI device
+ *
+ * Fill in the fields of the device structure with FDDI-generic values.
+ *
+ * Constructs a new net device, complete with a private data area of
+ * size @sizeof_priv.  A 32-byte (not bit) alignment is enforced for
+ * this private data area.
+ */
+struct net_device *alloc_fddidev(int sizeof_priv)
+{
+	return alloc_netdev(sizeof_priv, "fddi%d", NET_NAME_UNKNOWN,
+			    fddi_setup);
+}
+EXPORT_SYMBOL(alloc_fddidev);
+
+MODULE_DESCRIPTION("Core routines for FDDI network devices");
+MODULE_LICENSE("GPL");