Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 199 insertions, 0 deletions

diff --git a/lib/sg_split.c b/lib/sg_split.c
new file mode 100644
index 000000000..24e8f5e48
--- /dev/null
+++ b/lib/sg_split.c
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Robert Jarzmik <robert.jarzmik@free.fr>
+ *
+ * Scatterlist splitting helpers.
+ */
+
+#include <linux/scatterlist.h>
+#include <linux/slab.h>
+
+struct sg_splitter {
+	struct scatterlist *in_sg0;
+	int nents;
+	off_t skip_sg0;
+	unsigned int length_last_sg;
+
+	struct scatterlist *out_sg;
+};
+
+static int sg_calculate_split(struct scatterlist *in, int nents, int nb_splits,
+			      off_t skip, const size_t *sizes,
+			      struct sg_splitter *splitters, bool mapped)
+{
+	int i;
+	unsigned int sglen;
+	size_t size = sizes[0], len;
+	struct sg_splitter *curr = splitters;
+	struct scatterlist *sg;
+
+	for (i = 0; i < nb_splits; i++) {
+		splitters[i].in_sg0 = NULL;
+		splitters[i].nents = 0;
+	}
+
+	for_each_sg(in, sg, nents, i) {
+		sglen = mapped ? sg_dma_len(sg) : sg->length;
+		if (skip > sglen) {
+			skip -= sglen;
+			continue;
+		}
+
+		len = min_t(size_t, size, sglen - skip);
+		if (!curr->in_sg0) {
+			curr->in_sg0 = sg;
+			curr->skip_sg0 = skip;
+		}
+		size -= len;
+		curr->nents++;
+		curr->length_last_sg = len;
+
+		while (!size && (skip + len < sglen) && (--nb_splits > 0)) {
+			curr++;
+			size = *(++sizes);
+			skip += len;
+			len = min_t(size_t, size, sglen - skip);
+
+			curr->in_sg0 = sg;
+			curr->skip_sg0 = skip;
+			curr->nents = 1;
+			curr->length_last_sg = len;
+			size -= len;
+		}
+		skip = 0;
+
+		if (!size && --nb_splits > 0) {
+			curr++;
+			size = *(++sizes);
+		}
+
+		if (!nb_splits)
+			break;
+	}
+
+	return (size || !splitters[0].in_sg0) ? -EINVAL : 0;
+}
+
+static void sg_split_phys(struct sg_splitter *splitters, const int nb_splits)
+{
+	int i, j;
+	struct scatterlist *in_sg, *out_sg;
+	struct sg_splitter *split;
+
+	for (i = 0, split = splitters; i < nb_splits; i++, split++) {
+		in_sg = split->in_sg0;
+		out_sg = split->out_sg;
+		for (j = 0; j < split->nents; j++, out_sg++) {
+			*out_sg = *in_sg;
+			if (!j) {
+				out_sg->offset += split->skip_sg0;
+				out_sg->length -= split->skip_sg0;
+			}
+			sg_dma_address(out_sg) = 0;
+			sg_dma_len(out_sg) = 0;
+			in_sg = sg_next(in_sg);
+		}
+		out_sg[-1].length = split->length_last_sg;
+		sg_mark_end(out_sg - 1);
+	}
+}
+
+static void sg_split_mapped(struct sg_splitter *splitters, const int nb_splits)
+{
+	int i, j;
+	struct scatterlist *in_sg, *out_sg;
+	struct sg_splitter *split;
+
+	for (i = 0, split = splitters; i < nb_splits; i++, split++) {
+		in_sg = split->in_sg0;
+		out_sg = split->out_sg;
+		for (j = 0; j < split->nents; j++, out_sg++) {
+			sg_dma_address(out_sg) = sg_dma_address(in_sg);
+			sg_dma_len(out_sg) = sg_dma_len(in_sg);
+			if (!j) {
+				sg_dma_address(out_sg) += split->skip_sg0;
+				sg_dma_len(out_sg) -= split->skip_sg0;
+			}
+			in_sg = sg_next(in_sg);
+		}
+		sg_dma_len(--out_sg) = split->length_last_sg;
+	}
+}
+
+/**
+ * sg_split - split a scatterlist into several scatterlists
+ * @in: the input sg list
+ * @in_mapped_nents: the result of a dma_map_sg(in, ...), or 0 if not mapped.
+ * @skip: the number of bytes to skip in the input sg list
+ * @nb_splits: the number of desired sg outputs
+ * @split_sizes: the respective size of each output sg list in bytes
+ * @out: an array where to store the allocated output sg lists
+ * @out_mapped_nents: the resulting sg lists mapped number of sg entries. Might
+ *                    be NULL if sglist not already mapped (in_mapped_nents = 0)
+ * @gfp_mask: the allocation flag
+ *
+ * This function splits the input sg list into nb_splits sg lists, which are
+ * allocated and stored into out.
+ * The @in is split into :
+ *  - @out[0], which covers bytes [@skip .. @skip + @split_sizes[0] - 1] of @in
+ *  - @out[1], which covers bytes [@skip + split_sizes[0] ..
+ *                                 @skip + @split_sizes[0] + @split_sizes[1] -1]
+ * etc ...
+ * It will be the caller's duty to kfree() out array members.
+ *
+ * Returns 0 upon success, or error code
+ */
+int sg_split(struct scatterlist *in, const int in_mapped_nents,
+	     const off_t skip, const int nb_splits,
+	     const size_t *split_sizes,
+	     struct scatterlist **out, int *out_mapped_nents,
+	     gfp_t gfp_mask)
+{
+	int i, ret;
+	struct sg_splitter *splitters;
+
+	splitters = kzalloc_objs(*splitters, nb_splits, gfp_mask);
+	if (!splitters)
+		return -ENOMEM;
+
+	ret = sg_calculate_split(in, sg_nents(in), nb_splits, skip, split_sizes,
+			   splitters, false);
+	if (ret < 0)
+		goto err;
+
+	ret = -ENOMEM;
+	for (i = 0; i < nb_splits; i++) {
+		splitters[i].out_sg = kmalloc_objs(struct scatterlist,
+						   splitters[i].nents, gfp_mask);
+		if (!splitters[i].out_sg)
+			goto err;
+	}
+
+	/*
+	 * The order of these 3 calls is important and should be kept.
+	 */
+	sg_split_phys(splitters, nb_splits);
+	if (in_mapped_nents) {
+		ret = sg_calculate_split(in, in_mapped_nents, nb_splits, skip,
+					 split_sizes, splitters, true);
+		if (ret < 0)
+			goto err;
+		sg_split_mapped(splitters, nb_splits);
+	}
+
+	for (i = 0; i < nb_splits; i++) {
+		out[i] = splitters[i].out_sg;
+		if (out_mapped_nents)
+			out_mapped_nents[i] = splitters[i].nents;
+	}
+
+	kfree(splitters);
+	return 0;
+
+err:
+	for (i = 0; i < nb_splits; i++)
+		kfree(splitters[i].out_sg);
+	kfree(splitters);
+	return ret;
+}
+EXPORT_SYMBOL(sg_split);