Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 280 insertions, 0 deletions

diff --git a/lib/rcuref.c b/lib/rcuref.c
new file mode 100644
index 000000000..5bd726b71
--- /dev/null
+++ b/lib/rcuref.c
@@ -0,0 +1,280 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/*
+ * rcuref - A scalable reference count implementation for RCU managed objects
+ *
+ * rcuref is provided to replace open coded reference count implementations
+ * based on atomic_t. It protects explicitely RCU managed objects which can
+ * be visible even after the last reference has been dropped and the object
+ * is heading towards destruction.
+ *
+ * A common usage pattern is:
+ *
+ * get()
+ *	rcu_read_lock();
+ *	p = get_ptr();
+ *	if (p && !atomic_inc_not_zero(&p->refcnt))
+ *		p = NULL;
+ *	rcu_read_unlock();
+ *	return p;
+ *
+ * put()
+ *	if (!atomic_dec_return(&->refcnt)) {
+ *		remove_ptr(p);
+ *		kfree_rcu((p, rcu);
+ *	}
+ *
+ * atomic_inc_not_zero() is implemented with a try_cmpxchg() loop which has
+ * O(N^2) behaviour under contention with N concurrent operations.
+ *
+ * rcuref uses atomic_add_negative_relaxed() for the fast path, which scales
+ * better under contention.
+ *
+ * Why not refcount?
+ * =================
+ *
+ * In principle it should be possible to make refcount use the rcuref
+ * scheme, but the destruction race described below cannot be prevented
+ * unless the protected object is RCU managed.
+ *
+ * Theory of operation
+ * ===================
+ *
+ * rcuref uses an unsigned integer reference counter. As long as the
+ * counter value is greater than or equal to RCUREF_ONEREF and not larger
+ * than RCUREF_MAXREF the reference is alive:
+ *
+ * ONEREF   MAXREF               SATURATED             RELEASED      DEAD    NOREF
+ * 0        0x7FFFFFFF 0x8000000 0xA0000000 0xBFFFFFFF 0xC0000000 0xE0000000 0xFFFFFFFF
+ * <---valid --------> <-------saturation zone-------> <-----dead zone----->
+ *
+ * The get() and put() operations do unconditional increments and
+ * decrements. The result is checked after the operation. This optimizes
+ * for the fast path.
+ *
+ * If the reference count is saturated or dead, then the increments and
+ * decrements are not harmful as the reference count still stays in the
+ * respective zones and is always set back to STATURATED resp. DEAD. The
+ * zones have room for 2^28 racing operations in each direction, which
+ * makes it practically impossible to escape the zones.
+ *
+ * Once the last reference is dropped the reference count becomes
+ * RCUREF_NOREF which forces rcuref_put() into the slowpath operation. The
+ * slowpath then tries to set the reference count from RCUREF_NOREF to
+ * RCUREF_DEAD via a cmpxchg(). This opens a small window where a
+ * concurrent rcuref_get() can acquire the reference count and bring it
+ * back to RCUREF_ONEREF or even drop the reference again and mark it DEAD.
+ *
+ * If the cmpxchg() succeeds then a concurrent rcuref_get() will result in
+ * DEAD + 1, which is inside the dead zone. If that happens the reference
+ * count is put back to DEAD.
+ *
+ * The actual race is possible due to the unconditional increment and
+ * decrements in rcuref_get() and rcuref_put():
+ *
+ *	T1				T2
+ *	get()				put()
+ *					if (atomic_add_negative(-1, &ref->refcnt))
+ *		succeeds->			atomic_cmpxchg(&ref->refcnt, NOREF, DEAD);
+ *
+ *	atomic_add_negative(1, &ref->refcnt);	<- Elevates refcount to DEAD + 1
+ *
+ * As the result of T1's add is negative, the get() goes into the slow path
+ * and observes refcnt being in the dead zone which makes the operation fail.
+ *
+ * Possible critical states:
+ *
+ *	Context Counter	References	Operation
+ *	T1	0	1		init()
+ *	T2	1	2		get()
+ *	T1	0	1		put()
+ *	T2     -1	0		put() tries to mark dead
+ *	T1	0	1		get()
+ *	T2	0	1		put() mark dead fails
+ *	T1     -1	0		put() tries to mark dead
+ *	T1    DEAD	0		put() mark dead succeeds
+ *	T2    DEAD+1	0		get() fails and puts it back to DEAD
+ *
+ * Of course there are more complex scenarios, but the above illustrates
+ * the working principle. The rest is left to the imagination of the
+ * reader.
+ *
+ * Deconstruction race
+ * ===================
+ *
+ * The release operation must be protected by prohibiting a grace period in
+ * order to prevent a possible use after free:
+ *
+ *	T1				T2
+ *	put()				get()
+ *	// ref->refcnt = ONEREF
+ *	if (!atomic_add_negative(-1, &ref->refcnt))
+ *		return false;				<- Not taken
+ *
+ *	// ref->refcnt == NOREF
+ *	--> preemption
+ *					// Elevates ref->refcnt to ONEREF
+ *					if (!atomic_add_negative(1, &ref->refcnt))
+ *						return true;			<- taken
+ *
+ *					if (put(&p->ref)) { <-- Succeeds
+ *						remove_pointer(p);
+ *						kfree_rcu(p, rcu);
+ *					}
+ *
+ *		RCU grace period ends, object is freed
+ *
+ *	atomic_cmpxchg(&ref->refcnt, NOREF, DEAD);	<- UAF
+ *
+ * This is prevented by disabling preemption around the put() operation as
+ * that's in most kernel configurations cheaper than a rcu_read_lock() /
+ * rcu_read_unlock() pair and in many cases even a NOOP. In any case it
+ * prevents the grace period which keeps the object alive until all put()
+ * operations complete.
+ *
+ * Saturation protection
+ * =====================
+ *
+ * The reference count has a saturation limit RCUREF_MAXREF (INT_MAX).
+ * Once this is exceedded the reference count becomes stale by setting it
+ * to RCUREF_SATURATED, which will cause a memory leak, but it prevents
+ * wrap arounds which obviously cause worse problems than a memory
+ * leak. When saturation is reached a warning is emitted.
+ *
+ * Race conditions
+ * ===============
+ *
+ * All reference count increment/decrement operations are unconditional and
+ * only verified after the fact. This optimizes for the good case and takes
+ * the occasional race vs. a dead or already saturated refcount into
+ * account. The saturation and dead zones are large enough to accomodate
+ * for that.
+ *
+ * Memory ordering
+ * ===============
+ *
+ * Memory ordering rules are slightly relaxed wrt regular atomic_t functions
+ * and provide only what is strictly required for refcounts.
+ *
+ * The increments are fully relaxed; these will not provide ordering. The
+ * rationale is that whatever is used to obtain the object to increase the
+ * reference count on will provide the ordering. For locked data
+ * structures, its the lock acquire, for RCU/lockless data structures its
+ * the dependent load.
+ *
+ * rcuref_get() provides a control dependency ordering future stores which
+ * ensures that the object is not modified when acquiring a reference
+ * fails.
+ *
+ * rcuref_put() provides release order, i.e. all prior loads and stores
+ * will be issued before. It also provides a control dependency ordering
+ * against the subsequent destruction of the object.
+ *
+ * If rcuref_put() successfully dropped the last reference and marked the
+ * object DEAD it also provides acquire ordering.
+ */
+
+#include <linux/export.h>
+#include <linux/rcuref.h>
+
+/**
+ * rcuref_get_slowpath - Slowpath of rcuref_get()
+ * @ref:	Pointer to the reference count
+ *
+ * Invoked when the reference count is outside of the valid zone.
+ *
+ * Return:
+ *	False if the reference count was already marked dead
+ *
+ *	True if the reference count is saturated, which prevents the
+ *	object from being deconstructed ever.
+ */
+bool rcuref_get_slowpath(rcuref_t *ref)
+{
+	unsigned int cnt = atomic_read(&ref->refcnt);
+
+	/*
+	 * If the reference count was already marked dead, undo the
+	 * increment so it stays in the middle of the dead zone and return
+	 * fail.
+	 */
+	if (cnt >= RCUREF_RELEASED) {
+		atomic_set(&ref->refcnt, RCUREF_DEAD);
+		return false;
+	}
+
+	/*
+	 * If it was saturated, warn and mark it so. In case the increment
+	 * was already on a saturated value restore the saturation
+	 * marker. This keeps it in the middle of the saturation zone and
+	 * prevents the reference count from overflowing. This leaks the
+	 * object memory, but prevents the obvious reference count overflow
+	 * damage.
+	 */
+	if (WARN_ONCE(cnt > RCUREF_MAXREF, "rcuref saturated - leaking memory"))
+		atomic_set(&ref->refcnt, RCUREF_SATURATED);
+	return true;
+}
+EXPORT_SYMBOL_GPL(rcuref_get_slowpath);
+
+/**
+ * rcuref_put_slowpath - Slowpath of __rcuref_put()
+ * @ref:	Pointer to the reference count
+ * @cnt:	The resulting value of the fastpath decrement
+ *
+ * Invoked when the reference count is outside of the valid zone.
+ *
+ * Return:
+ *	True if this was the last reference with no future references
+ *	possible. This signals the caller that it can safely schedule the
+ *	object, which is protected by the reference counter, for
+ *	deconstruction.
+ *
+ *	False if there are still active references or the put() raced
+ *	with a concurrent get()/put() pair. Caller is not allowed to
+ *	deconstruct the protected object.
+ */
+bool rcuref_put_slowpath(rcuref_t *ref, unsigned int cnt)
+{
+	/* Did this drop the last reference? */
+	if (likely(cnt == RCUREF_NOREF)) {
+		/*
+		 * Carefully try to set the reference count to RCUREF_DEAD.
+		 *
+		 * This can fail if a concurrent get() operation has
+		 * elevated it again or the corresponding put() even marked
+		 * it dead already. Both are valid situations and do not
+		 * require a retry. If this fails the caller is not
+		 * allowed to deconstruct the object.
+		 */
+		if (!atomic_try_cmpxchg_release(&ref->refcnt, &cnt, RCUREF_DEAD))
+			return false;
+
+		/*
+		 * The caller can safely schedule the object for
+		 * deconstruction. Provide acquire ordering.
+		 */
+		smp_acquire__after_ctrl_dep();
+		return true;
+	}
+
+	/*
+	 * If the reference count was already in the dead zone, then this
+	 * put() operation is imbalanced. Warn, put the reference count back to
+	 * DEAD and tell the caller to not deconstruct the object.
+	 */
+	if (WARN_ONCE(cnt >= RCUREF_RELEASED, "rcuref - imbalanced put()")) {
+		atomic_set(&ref->refcnt, RCUREF_DEAD);
+		return false;
+	}
+
+	/*
+	 * This is a put() operation on a saturated refcount. Restore the
+	 * mean saturation value and tell the caller to not deconstruct the
+	 * object.
+	 */
+	if (cnt > RCUREF_MAXREF)
+		atomic_set(&ref->refcnt, RCUREF_SATURATED);
+	return false;
+}
+EXPORT_SYMBOL_GPL(rcuref_put_slowpath);