Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 159 insertions, 0 deletions

diff --git a/lib/fonts/Kconfig b/lib/fonts/Kconfig
new file mode 100644
index 000000000..7d03823e4
--- /dev/null
+++ b/lib/fonts/Kconfig
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Font configuration
+#
+
+config FONT_SUPPORT
+	tristate
+
+if FONT_SUPPORT
+
+config FONTS
+	bool "Select compiled-in fonts"
+	depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE || DRM_PANIC || DRM_CLIENT_LOG
+	help
+	  Say Y here if you would like to use fonts other than the default
+	  your frame buffer console usually use.
+
+	  Note that the answer to this question won't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about foreign fonts.
+
+	  If unsure, say N (the default choices are safe).
+
+config FONT_8x8
+	bool "VGA 8x8 font" if FONTS
+	depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE || DRM_PANIC
+	default y if !SPARC && !FONTS
+	help
+	  This is the "high resolution" font for the VGA frame buffer (the one
+	  provided by the text console 80x50 (and higher) modes).
+
+	  Note that this is a poor quality font. The VGA 8x16 font is quite a
+	  lot more readable.
+
+	  Given the resolution provided by the frame buffer device, answer N
+	  here is safe.
+
+config FONT_8x16
+	bool "VGA 8x16 font" if FONTS
+	default y if !SPARC && !FONTS
+	help
+	  This is the "high resolution" font for the VGA frame buffer (the one
+	  provided by the VGA text console 80x25 mode.
+
+	  If unsure, say Y.
+
+config FONT_6x11
+	bool "Mac console 6x11 font (not supported by all drivers)" if FONTS
+	depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE || DRM_PANIC
+	default y if !SPARC && !FONTS && MAC
+	help
+	  Small console font with Macintosh-style high-half glyphs.  Some Mac
+	  framebuffer drivers don't support this one at all.
+
+config FONT_7x14
+	bool "console 7x14 font (not supported by all drivers)" if FONTS
+	depends on FRAMEBUFFER_CONSOLE || DRM_PANIC
+	help
+	  Console font with characters just a bit smaller than the default.
+	  If the standard 8x16 font is a little too big for you, say Y.
+	  Otherwise, say N.
+
+config FONT_PEARL_8x8
+	bool "Pearl (old m68k) console 8x8 font" if FONTS
+	depends on FRAMEBUFFER_CONSOLE || DRM_PANIC
+	default y if !SPARC && !FONTS && AMIGA
+	help
+	  Small console font with PC-style control-character and high-half
+	  glyphs.
+
+config FONT_ACORN_8x8
+	bool "Acorn console 8x8 font" if FONTS
+	depends on FRAMEBUFFER_CONSOLE || DRM_PANIC
+	default y if !SPARC && !FONTS && ARM && ARCH_ACORN
+	help
+	  Small console font with PC-style control characters and high-half
+	  glyphs.
+
+config FONT_MINI_4x6
+	bool "Mini 4x6 font"
+	depends on !SPARC && FONTS
+
+config FONT_6x10
+	bool "Medium-size 6x10 font"
+	depends on !SPARC && FONTS
+	help
+	  Medium-size console font. Suitable for framebuffer consoles on
+	  embedded devices with a 320x240 screen, to get a reasonable number
+	  of characters (53x24) that are still at a readable size.
+
+config FONT_10x18
+	bool "console 10x18 font (not supported by all drivers)" if FONTS
+	depends on FRAMEBUFFER_CONSOLE || DRM_PANIC
+	help
+	  This is a high resolution console font for machines with very
+	  big letters. It fits between the sun 12x22 and the normal 8x16 font.
+	  If other fonts are too big or too small for you, say Y, otherwise say N.
+
+config FONT_SUN8x16
+	bool "Sparc console 8x16 font"
+	depends on (FRAMEBUFFER_CONSOLE && (FONTS || SPARC)) || \
+		   BOOTX_TEXT || EARLYFB
+	help
+	  This is the high resolution console font for Sun machines. Say Y.
+
+config FONT_SUN12x22
+	bool "Sparc console 12x22 font (not supported by all drivers)"
+	depends on FRAMEBUFFER_CONSOLE || DRM_PANIC
+	depends on !SPARC && FONTS
+	help
+	  This is the high resolution console font for Sun machines with very
+	  big letters (like the letters used in the SPARC PROM). If the
+	  standard font is unreadable for you, say Y, otherwise say N.
+
+config FONT_TER10x18
+	bool "Terminus 10x18 font (not supported by all drivers)"
+	depends on FRAMEBUFFER_CONSOLE || DRM_PANIC
+	depends on !SPARC && FONTS || SPARC
+	help
+	  Terminus Font is a clean, fixed width bitmap font, designed
+	  for long (8 and more hours per day) work with computers.
+	  This is the high resolution version made for use with 13-16" laptops.
+	  It fits between the normal 8x16 font and Terminus 16x32.
+	  If other fonts are unreadable for you, say Y, otherwise say N.
+
+config FONT_TER16x32
+	bool "Terminus 16x32 font (not supported by all drivers)"
+	depends on FRAMEBUFFER_CONSOLE || DRM_PANIC
+	depends on !SPARC && FONTS || SPARC
+	help
+	  Terminus Font is a clean, fixed width bitmap font, designed
+	  for long (8 and more hours per day) work with computers.
+	  This is the high resolution, large version for use with HiDPI screens.
+	  If the standard font is unreadable for you, say Y, otherwise say N.
+
+config FONT_6x8
+	bool "OLED 6x8 font" if FONTS
+	depends on FRAMEBUFFER_CONSOLE || DRM_PANIC
+	help
+	  This font is useful for small displays (OLED).
+
+config FONT_AUTOSELECT
+	def_bool y
+	depends on !FONT_8x8
+	depends on !FONT_6x11
+	depends on !FONT_7x14
+	depends on !FONT_PEARL_8x8
+	depends on !FONT_ACORN_8x8
+	depends on !FONT_MINI_4x6
+	depends on !FONT_6x10
+	depends on !FONT_SUN8x16
+	depends on !FONT_SUN12x22
+	depends on !FONT_10x18
+	depends on !FONT_TER10x18
+	depends on !FONT_TER16x32
+	depends on !FONT_6x8
+	select FONT_8x16
+
+endif # FONT_SUPPORT