Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 109 insertions, 0 deletions

diff --git a/lib/dim/rdma_dim.c b/lib/dim/rdma_dim.c
new file mode 100644
index 000000000..88f779486
--- /dev/null
+++ b/lib/dim/rdma_dim.c
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB
+/*
+ * Copyright (c) 2019, Mellanox Technologies inc.  All rights reserved.
+ */
+
+#include <linux/dim.h>
+
+static int rdma_dim_step(struct dim *dim)
+{
+	if (dim->tune_state == DIM_GOING_RIGHT) {
+		if (dim->profile_ix == (RDMA_DIM_PARAMS_NUM_PROFILES - 1))
+			return DIM_ON_EDGE;
+		dim->profile_ix++;
+		dim->steps_right++;
+	}
+	if (dim->tune_state == DIM_GOING_LEFT) {
+		if (dim->profile_ix == 0)
+			return DIM_ON_EDGE;
+		dim->profile_ix--;
+		dim->steps_left++;
+	}
+
+	return DIM_STEPPED;
+}
+
+static int rdma_dim_stats_compare(struct dim_stats *curr,
+				  struct dim_stats *prev)
+{
+	/* first stat */
+	if (!prev->cpms)
+		return DIM_STATS_SAME;
+
+	if (IS_SIGNIFICANT_DIFF(curr->cpms, prev->cpms))
+		return (curr->cpms > prev->cpms) ? DIM_STATS_BETTER :
+						DIM_STATS_WORSE;
+
+	if (IS_SIGNIFICANT_DIFF(curr->cpe_ratio, prev->cpe_ratio))
+		return (curr->cpe_ratio > prev->cpe_ratio) ? DIM_STATS_BETTER :
+						DIM_STATS_WORSE;
+
+	return DIM_STATS_SAME;
+}
+
+static bool rdma_dim_decision(struct dim_stats *curr_stats, struct dim *dim)
+{
+	int prev_ix = dim->profile_ix;
+	u8 state = dim->tune_state;
+	int stats_res;
+	int step_res;
+
+	if (state != DIM_PARKING_ON_TOP && state != DIM_PARKING_TIRED) {
+		stats_res = rdma_dim_stats_compare(curr_stats,
+						   &dim->prev_stats);
+
+		switch (stats_res) {
+		case DIM_STATS_SAME:
+			if (curr_stats->cpe_ratio <= 50 * prev_ix)
+				dim->profile_ix = 0;
+			break;
+		case DIM_STATS_WORSE:
+			dim_turn(dim);
+			fallthrough;
+		case DIM_STATS_BETTER:
+			step_res = rdma_dim_step(dim);
+			if (step_res == DIM_ON_EDGE)
+				dim_turn(dim);
+			break;
+		}
+	}
+
+	dim->prev_stats = *curr_stats;
+
+	return dim->profile_ix != prev_ix;
+}
+
+void rdma_dim(struct dim *dim, u64 completions)
+{
+	struct dim_sample *curr_sample = &dim->measuring_sample;
+	struct dim_stats curr_stats;
+	u32 nevents;
+
+	dim_update_sample_with_comps(curr_sample->event_ctr + 1, 0, 0,
+				     curr_sample->comp_ctr + completions,
+				     &dim->measuring_sample);
+
+	switch (dim->state) {
+	case DIM_MEASURE_IN_PROGRESS:
+		nevents = curr_sample->event_ctr - dim->start_sample.event_ctr;
+		if (nevents < DIM_NEVENTS)
+			break;
+		if (!dim_calc_stats(&dim->start_sample, curr_sample, &curr_stats))
+			break;
+		if (rdma_dim_decision(&curr_stats, dim)) {
+			dim->state = DIM_APPLY_NEW_PROFILE;
+			schedule_work(&dim->work);
+			break;
+		}
+		fallthrough;
+	case DIM_START_MEASURE:
+		dim->state = DIM_MEASURE_IN_PROGRESS;
+		dim_update_sample_with_comps(curr_sample->event_ctr, 0, 0,
+					     curr_sample->comp_ctr,
+					     &dim->start_sample);
+		break;
+	case DIM_APPLY_NEW_PROFILE:
+		break;
+	}
+}
+EXPORT_SYMBOL(rdma_dim);