Merge tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-tracegrafted

Pull tracing fixes from Steven Rostedt:

 - Don't destroy user event fields when removal fails

   User event fields are destroyed before the event is removed from
   visibility. But that can fail leaving the still visible event with no
   fields. Move the destroying of the fields to after the event is
   successfully removed from visibility.

 - Initialize function graph state is fork before calling
   copy_exec_state()

   For non-CLONE_VM forks, copy_exec_state() allocates a new
   task_exec_state. If that allocation fails, ftrace_graph_exit_task()
   will free the tasks ret_stack pointer. Since that pointer is still
   using the parent's ret_stack, it mistakenly frees the parent's
   pointer too.

   Call ftrace_graph_init() on the task first which will NULL out the
   new tasks's ret_stack and if the copy fails, it will not free
   anything.

 - Remove FGRAPH_MAX_INDEX

   The macro FGRAPH_MAX_INDEX was added but never used. Remove it.

 - Save ent_size in function graph printing of nested functions

   The function graph tracer needs to look at the next event to see if
   the next event is the return of the current function entry. If it is,
   it prints a single line:

	ktime_get();

   Otherwise it prints it like a nested function:

	tick_nohz_irq_exit() {
	    ktime_get();
	    kcpustat_irq_exit();
	}

   In order to look at the next event, it must save the current event so
   that it has the information to print from it. It saves the event in
   the iterator descriptor called "ent". What it doesn't save is the
   ent_size of the event which is now used to know if the function graph
   arguments are to be printed. The peek doesn't save the size so the
   size used happens to be that of the size of the last event that was
   seen.

   Save the entry event size in the iterator descriptor so that the
   correct size is used.

 - Fix several errors with freeing data in the histogram code

   The histogram code had a lot of leaked or or incorrect accounting
   when failures happen. Correct them.

 - Fix histogram regression of .percent and .graph modifiers

   Up until 6.3 histogram values could have "percent" or "graph"
   modifiers that changed how they were printed. But a change that added
   restricting histograms values from being strings, stack traces and
   other modifiers inadvertently prevented them from using the percent
   and graph modifiers, which were legal use cases for values.

   Put back the percent and graph modifiers.

 - Fix various typos in the comments

 - Set the trace_clock before initializing a histogram with clock
   argument

   The histogram API allows the user to specific which trace clock to
   use via a "clock=" string. The histogram is set up first before the
   clock is checked. If the passed in clock is not valid, it exits
   without fully fixing up the histogram leaving it on the list and a
   use-after-free can trigger.

   Update the clock argument first and if it fails then exit gracefully
   before the histogram trigger is placed on any lists.

 - Restore :mod: trailer after parsing in ftrace_set_clr_event

   The function ftrace_set_clr_event() modifies the parse string and
   needs to put it back to what was passed in. It searches for ":mod:"
   via a strsep() but fails to put back the first ':' in the string.

   Add back the ':' in the passed in string.

 - Take trace_array reference when opening a tracer options file

   The options files are dynamically created and some tracers add their
   own options. When a tracer adds their own list of options, the
   trace_array holding them has an array to hold the list of options for
   each tracer. This array increases in size via a krealloc(), and the
   new entry gets a newly allocated array to hold the options of the new
   tracer being added.

   The element in each entry of the tracer's option array holds a
   pointer back to the trace_array, a pointer to the tracer it is
   associated to, a pointer to the flags of the option.

   The issue is that these arrays are freed when the trace_array is
   freed when its instance it represents is removed from the instances
   directory. There's a race that an open of one of these options files
   can happen when the instance is being removed.

   Add a new helper function to be called by the open function of the
   options file to iterate all existing trace_arrays under a lock and
   find the one that has the given option element in one of it's tracer
   arrays. If found, then update the associated trace_array's reference
   counter to keep it from being freed. If not found, have the open call
   return -ENODEV.

 - Disable interrupts when acquiring the lock in rb_wake_up_waiters()

   The function rb_wake_up_waiters() assumes it will be called in
   interrupt context and does not disable irqs when taking
   cpu_buffer->reader_lock, which can be called in hard interrupt
   context. The issue is in PREEMPT_RT, this function is called in
   thread context leaving this lock open to a deadlock.

   Take the lock with interrupts disabled.

 - Use rcu_assign_pointer() for tmp_ops filter hash

   The tmp_ops used in update_ftrace_direct_mod() assigns its
   filter_hash field directly, but that field is annotated as __rcu and
   sparse complains. Assign it with rcu_assign_pointer()

 - Fix use-after-free in enable_trigger_private_data_free()

   The trace_event_call is accessed through the event_trigger_data's
   trace_event_file pointer to put the trace_event_call on freeing. The
   issue is that the trace_event_file data may have been freed already
   causing a use-after-free. Add a field to the event_trigger_data that
   points directly to the trace_event_call so that it can decrement its
   reference directly without needing to go through the
   trace_event_file.

 - Fix accounting of buffer data remote headers

   trace_buffer_desc_size() and trace_remote_alloc_buffer() undercount
   the number of pages is needed for the asked for size as it doesn't
   take into account the meta data on each page. Add a helper function
   to do the calculation properly and use that in these functions.

 - Catch nr_page_va overflow in ring_buffer_desc sizing

   The number of pages per remote ring buffer is capped by
   ring_buffer_desc::nr_page_va (32 bits). A buffer_size large enough to
   overflow that field would silently allocate a descriptor smaller than
   what was asked for.

 - Do not resize the subbuf order if any per_cpu buffer is disabled

   The mmapping of ring buffers disables resizing the subbuffers, but it
   is done per-cpu whereas the subbuf size change is done for all the
   per_cpu buffers under the buffer->mutex. It could change the size of
   some while the mapping is happening on others. Have the resize of the
   subbuf order check all the per_cpu buffers under the lock to see if
   any of them is disabled before starting and causing an inconsistency
   between buffers that are being mapped.

* tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (25 commits)
  ring-buffer: Check resize_disabled before publishing the new subbuf order
  tracing/remotes: Catch nr_page_va overflow in ring_buffer_desc sizing
  tracing/remotes: Account for ring buffer page header in size calculation
  tracing: Don't dereference trace_event_file in deferred trigger free
  ftrace: Use rcu_assign_pointer() for tmp_ops filter hash
  ring-buffer: Acquire the lock with irqsave in rb_wake_up_waiters()
  tracing: Take trace_array reference when opening a tracer options file
  tracing: Fix ring_buffer_read_page_size() kernel-doc
  tracing: Restore :mod: trailer after parsing in ftrace_set_clr_event()
  tracing: Fix memory corruption from a "STACKTRACE" histogram key
  tracing: Fix memory corruption from the histogram stacktrace modifier
  tracing: Undo the registration when enabling the histogram trigger fails
  tracing: Take the reference before publishing the named histogram trigger
  tracing: Set the trace clock before registering the histogram trigger
  tracing: Fix typo "preceeded" in comment
  tracing: Fix typo "availabe" in comment
  tracing: Let histogram values keep the percent and graph modifiers
  tracing: Keep the entry count when the histogram stats allocation fails
  tracing: Free histogram the field rejected for a bad modifier
  tracing: Free histogram the var ref when its initialization fails
  ...

1 files changed, 352 insertions, 0 deletions

diff --git a/lib/decompress_unzstd.c b/lib/decompress_unzstd.c
new file mode 100644
index 000000000..bba2c0bb1
--- /dev/null
+++ b/lib/decompress_unzstd.c
@@ -0,0 +1,352 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Important notes about in-place decompression
+ *
+ * At least on x86, the kernel is decompressed in place: the compressed data
+ * is placed to the end of the output buffer, and the decompressor overwrites
+ * most of the compressed data. There must be enough safety margin to
+ * guarantee that the write position is always behind the read position.
+ *
+ * The safety margin for ZSTD with a 128 KB block size is calculated below.
+ * Note that the margin with ZSTD is bigger than with GZIP or XZ!
+ *
+ * The worst case for in-place decompression is that the beginning of
+ * the file is compressed extremely well, and the rest of the file is
+ * uncompressible. Thus, we must look for worst-case expansion when the
+ * compressor is encoding uncompressible data.
+ *
+ * The structure of the .zst file in case of a compressed kernel is as follows.
+ * Maximum sizes (as bytes) of the fields are in parenthesis.
+ *
+ *    Frame Header: (18)
+ *    Blocks: (N)
+ *    Checksum: (4)
+ *
+ * The frame header and checksum overhead is at most 22 bytes.
+ *
+ * ZSTD stores the data in blocks. Each block has a header whose size is
+ * a 3 bytes. After the block header, there is up to 128 KB of payload.
+ * The maximum uncompressed size of the payload is 128 KB. The minimum
+ * uncompressed size of the payload is never less than the payload size
+ * (excluding the block header).
+ *
+ * The assumption, that the uncompressed size of the payload is never
+ * smaller than the payload itself, is valid only when talking about
+ * the payload as a whole. It is possible that the payload has parts where
+ * the decompressor consumes more input than it produces output. Calculating
+ * the worst case for this would be tricky. Instead of trying to do that,
+ * let's simply make sure that the decompressor never overwrites any bytes
+ * of the payload which it is currently reading.
+ *
+ * Now we have enough information to calculate the safety margin. We need
+ *   - 22 bytes for the .zst file format headers;
+ *   - 3 bytes per every 128 KiB of uncompressed size (one block header per
+ *     block); and
+ *   - 128 KiB (biggest possible zstd block size) to make sure that the
+ *     decompressor never overwrites anything from the block it is currently
+ *     reading.
+ *
+ * We get the following formula:
+ *
+ *    safety_margin = 22 + uncompressed_size * 3 / 131072 + 131072
+ *                 <= 22 + (uncompressed_size >> 15) + 131072
+ */
+
+/*
+ * Preboot environments #include "path/to/decompress_unzstd.c".
+ * All of the source files we depend on must be #included.
+ * zstd's only source dependency is xxhash, which has no source
+ * dependencies.
+ *
+ * When UNZSTD_PREBOOT is defined we declare __decompress(), which is
+ * used for kernel decompression, instead of unzstd().
+ *
+ * Define __DISABLE_EXPORTS in preboot environments to prevent symbols
+ * from xxhash and zstd from being exported by the EXPORT_SYMBOL macro.
+ */
+#ifdef STATIC
+# define UNZSTD_PREBOOT
+# include "xxhash.c"
+# include "zstd/decompress_sources.h"
+#else
+#include <linux/decompress/unzstd.h>
+#endif
+
+#include <linux/decompress/mm.h>
+#include <linux/kernel.h>
+#include <linux/zstd.h>
+
+/* 128MB is the maximum window size supported by zstd. */
+#define ZSTD_WINDOWSIZE_MAX	(1 << ZSTD_WINDOWLOG_MAX)
+/*
+ * Size of the input and output buffers in multi-call mode.
+ * Pick a larger size because it isn't used during kernel decompression,
+ * since that is single pass, and we have to allocate a large buffer for
+ * zstd's window anyway. The larger size speeds up initramfs decompression.
+ */
+#define ZSTD_IOBUF_SIZE		(1 << 17)
+
+static int INIT handle_zstd_error(size_t ret, void (*error)(char *x))
+{
+	const zstd_error_code err = zstd_get_error_code(ret);
+
+	if (!zstd_is_error(ret))
+		return 0;
+
+	/*
+	 * zstd_get_error_name() cannot be used because error takes a char *
+	 * not a const char *
+	 */
+	switch (err) {
+	case ZSTD_error_memory_allocation:
+		error("ZSTD decompressor ran out of memory");
+		break;
+	case ZSTD_error_prefix_unknown:
+		error("Input is not in the ZSTD format (wrong magic bytes)");
+		break;
+	case ZSTD_error_dstSize_tooSmall:
+	case ZSTD_error_corruption_detected:
+	case ZSTD_error_checksum_wrong:
+		error("ZSTD-compressed data is corrupt");
+		break;
+	default:
+		error("ZSTD-compressed data is probably corrupt");
+		break;
+	}
+	return -1;
+}
+
+/*
+ * Handle the case where we have the entire input and output in one segment.
+ * We can allocate less memory (no circular buffer for the sliding window),
+ * and avoid some memcpy() calls.
+ */
+static int INIT decompress_single(const u8 *in_buf, long in_len, u8 *out_buf,
+				  long out_len, long *in_pos,
+				  void (*error)(char *x))
+{
+	const size_t wksp_size = zstd_dctx_workspace_bound();
+	void *wksp = large_malloc(wksp_size);
+	zstd_dctx *dctx = zstd_init_dctx(wksp, wksp_size);
+	int err;
+	size_t ret;
+
+	if (dctx == NULL) {
+		error("Out of memory while allocating zstd_dctx");
+		err = -1;
+		goto out;
+	}
+	/*
+	 * Find out how large the frame actually is, there may be junk at
+	 * the end of the frame that zstd_decompress_dctx() can't handle.
+	 */
+	ret = zstd_find_frame_compressed_size(in_buf, in_len);
+	err = handle_zstd_error(ret, error);
+	if (err)
+		goto out;
+	in_len = (long)ret;
+
+	ret = zstd_decompress_dctx(dctx, out_buf, out_len, in_buf, in_len);
+	err = handle_zstd_error(ret, error);
+	if (err)
+		goto out;
+
+	if (in_pos != NULL)
+		*in_pos = in_len;
+
+	err = 0;
+out:
+	if (wksp != NULL)
+		large_free(wksp);
+	return err;
+}
+
+static int INIT __unzstd(unsigned char *in_buf, long in_len,
+			 long (*fill)(void*, unsigned long),
+			 long (*flush)(void*, unsigned long),
+			 unsigned char *out_buf, long out_len,
+			 long *in_pos,
+			 void (*error)(char *x))
+{
+	zstd_in_buffer in;
+	zstd_out_buffer out;
+	zstd_frame_header header;
+	void *in_allocated = NULL;
+	void *out_allocated = NULL;
+	void *wksp = NULL;
+	size_t wksp_size;
+	zstd_dstream *dstream;
+	int err;
+	size_t ret;
+
+	/*
+	 * ZSTD decompression code won't be happy if the buffer size is so big
+	 * that its end address overflows. When the size is not provided, make
+	 * it as big as possible without having the end address overflow.
+	 */
+	if (out_len == 0)
+		out_len = UINTPTR_MAX - (uintptr_t)out_buf;
+
+	if (fill == NULL && flush == NULL)
+		/*
+		 * We can decompress faster and with less memory when we have a
+		 * single chunk.
+		 */
+		return decompress_single(in_buf, in_len, out_buf, out_len,
+					 in_pos, error);
+
+	/*
+	 * If in_buf is not provided, we must be using fill(), so allocate
+	 * a large enough buffer. If it is provided, it must be at least
+	 * ZSTD_IOBUF_SIZE large.
+	 */
+	if (in_buf == NULL) {
+		in_allocated = large_malloc(ZSTD_IOBUF_SIZE);
+		if (in_allocated == NULL) {
+			error("Out of memory while allocating input buffer");
+			err = -1;
+			goto out;
+		}
+		in_buf = in_allocated;
+		in_len = 0;
+	}
+	/* Read the first chunk, since we need to decode the frame header. */
+	if (fill != NULL)
+		in_len = fill(in_buf, ZSTD_IOBUF_SIZE);
+	if (in_len < 0) {
+		error("ZSTD-compressed data is truncated");
+		err = -1;
+		goto out;
+	}
+	/* Set the first non-empty input buffer. */
+	in.src = in_buf;
+	in.pos = 0;
+	in.size = in_len;
+	/* Allocate the output buffer if we are using flush(). */
+	if (flush != NULL) {
+		out_allocated = large_malloc(ZSTD_IOBUF_SIZE);
+		if (out_allocated == NULL) {
+			error("Out of memory while allocating output buffer");
+			err = -1;
+			goto out;
+		}
+		out_buf = out_allocated;
+		out_len = ZSTD_IOBUF_SIZE;
+	}
+	/* Set the output buffer. */
+	out.dst = out_buf;
+	out.pos = 0;
+	out.size = out_len;
+
+	/*
+	 * We need to know the window size to allocate the zstd_dstream.
+	 * Since we are streaming, we need to allocate a buffer for the sliding
+	 * window. The window size varies from 1 KB to ZSTD_WINDOWSIZE_MAX
+	 * (8 MB), so it is important to use the actual value so as not to
+	 * waste memory when it is smaller.
+	 */
+	ret = zstd_get_frame_header(&header, in.src, in.size);
+	err = handle_zstd_error(ret, error);
+	if (err)
+		goto out;
+	if (ret != 0) {
+		error("ZSTD-compressed data has an incomplete frame header");
+		err = -1;
+		goto out;
+	}
+	if (header.windowSize > ZSTD_WINDOWSIZE_MAX) {
+		error("ZSTD-compressed data has too large a window size");
+		err = -1;
+		goto out;
+	}
+
+	/*
+	 * Allocate the zstd_dstream now that we know how much memory is
+	 * required.
+	 */
+	wksp_size = zstd_dstream_workspace_bound(header.windowSize);
+	wksp = large_malloc(wksp_size);
+	dstream = zstd_init_dstream(header.windowSize, wksp, wksp_size);
+	if (dstream == NULL) {
+		error("Out of memory while allocating ZSTD_DStream");
+		err = -1;
+		goto out;
+	}
+
+	/*
+	 * Decompression loop:
+	 * Read more data if necessary (error if no more data can be read).
+	 * Call the decompression function, which returns 0 when finished.
+	 * Flush any data produced if using flush().
+	 */
+	if (in_pos != NULL)
+		*in_pos = 0;
+	do {
+		/*
+		 * If we need to reload data, either we have fill() and can
+		 * try to get more data, or we don't and the input is truncated.
+		 */
+		if (in.pos == in.size) {
+			if (in_pos != NULL)
+				*in_pos += in.pos;
+			in_len = fill ? fill(in_buf, ZSTD_IOBUF_SIZE) : -1;
+			if (in_len < 0) {
+				error("ZSTD-compressed data is truncated");
+				err = -1;
+				goto out;
+			}
+			in.pos = 0;
+			in.size = in_len;
+		}
+		/* Returns zero when the frame is complete. */
+		ret = zstd_decompress_stream(dstream, &out, &in);
+		err = handle_zstd_error(ret, error);
+		if (err)
+			goto out;
+		/* Flush all of the data produced if using flush(). */
+		if (flush != NULL && out.pos > 0) {
+			if (out.pos != flush(out.dst, out.pos)) {
+				error("Failed to flush()");
+				err = -1;
+				goto out;
+			}
+			out.pos = 0;
+		}
+	} while (ret != 0);
+
+	if (in_pos != NULL)
+		*in_pos += in.pos;
+
+	err = 0;
+out:
+	if (in_allocated != NULL)
+		large_free(in_allocated);
+	if (out_allocated != NULL)
+		large_free(out_allocated);
+	if (wksp != NULL)
+		large_free(wksp);
+	return err;
+}
+
+#ifndef UNZSTD_PREBOOT
+STATIC int INIT unzstd(unsigned char *buf, long len,
+		       long (*fill)(void*, unsigned long),
+		       long (*flush)(void*, unsigned long),
+		       unsigned char *out_buf,
+		       long *pos,
+		       void (*error)(char *x))
+{
+	return __unzstd(buf, len, fill, flush, out_buf, 0, pos, error);
+}
+#else
+STATIC int INIT __decompress(unsigned char *buf, long len,
+			     long (*fill)(void*, unsigned long),
+			     long (*flush)(void*, unsigned long),
+			     unsigned char *out_buf, long out_len,
+			     long *pos,
+			     void (*error)(char *x))
+{
+	return __unzstd(buf, len, fill, flush, out_buf, out_len, pos, error);
+}
+#endif