Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 208 insertions, 0 deletions

diff --git a/lib/crypto/tests/Kconfig b/lib/crypto/tests/Kconfig
new file mode 100644
index 000000000..e12111462
--- /dev/null
+++ b/lib/crypto/tests/Kconfig
@@ -0,0 +1,208 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+config CRYPTO_LIB_AES_CBC_MACS_KUNIT_TEST
+	tristate "KUnit tests for AES-CMAC, AES-XCBC-MAC, and AES-CBC-MAC" if !KUNIT_ALL_TESTS
+	depends on KUNIT && CRYPTO_LIB_AES_CBC_MACS
+	default KUNIT_ALL_TESTS
+	select CRYPTO_LIB_BENCHMARK_VISIBLE
+	help
+	  KUnit tests for the AES-CMAC, AES-XCBC-MAC, and AES-CBC-MAC message
+	  authentication codes.
+
+config CRYPTO_LIB_AES_CCM_KUNIT_TEST
+	tristate "KUnit tests for AES-CCM" if !KUNIT_ALL_TESTS
+	depends on KUNIT && CRYPTO_LIB_AES_CCM
+	default KUNIT_ALL_TESTS
+	select CRYPTO_LIB_BENCHMARK_VISIBLE
+	# This test uses BLAKE2s, but that's always built-in.
+	help
+	  KUnit tests for the AES-CCM authenticated encryption algorithm.
+
+config CRYPTO_LIB_AES_GCM_KUNIT_TEST
+	tristate "KUnit tests for AES-GCM" if !KUNIT_ALL_TESTS
+	depends on KUNIT && CRYPTO_LIB_AES_GCM
+	default KUNIT_ALL_TESTS
+	select CRYPTO_LIB_BENCHMARK_VISIBLE
+	# This test uses BLAKE2s, but that's always built-in.
+	help
+	  KUnit tests for the AES-GCM authenticated encryption algorithm.
+
+config CRYPTO_LIB_BLAKE2B_KUNIT_TEST
+	tristate "KUnit tests for BLAKE2b" if !KUNIT_ALL_TESTS
+	depends on KUNIT && CRYPTO_LIB_BLAKE2B
+	default KUNIT_ALL_TESTS
+	select CRYPTO_LIB_BENCHMARK_VISIBLE
+	help
+	  KUnit tests for the BLAKE2b cryptographic hash function.
+
+config CRYPTO_LIB_BLAKE2S_KUNIT_TEST
+	tristate "KUnit tests for BLAKE2s" if !KUNIT_ALL_TESTS
+	depends on KUNIT
+	default KUNIT_ALL_TESTS
+	select CRYPTO_LIB_BENCHMARK_VISIBLE
+	# No need to depend on CRYPTO_LIB_BLAKE2S here, as that option doesn't
+	# exist; the BLAKE2s code is always built-in for the /dev/random driver.
+	help
+	  KUnit tests for the BLAKE2s cryptographic hash function.
+
+config CRYPTO_LIB_CHACHA20POLY1305_KUNIT_TEST
+	tristate "KUnit tests for ChaCha20Poly1305" if !KUNIT_ALL_TESTS
+	depends on KUNIT && CRYPTO_LIB_CHACHA20POLY1305
+	default KUNIT_ALL_TESTS
+	select CRYPTO_LIB_BENCHMARK_VISIBLE
+	help
+	  KUnit tests for the ChaCha20Poly1305 authenticated encryption
+	  algorithm.
+
+config CRYPTO_LIB_CURVE25519_KUNIT_TEST
+	tristate "KUnit tests for Curve25519" if !KUNIT_ALL_TESTS
+	depends on KUNIT && CRYPTO_LIB_CURVE25519
+	default KUNIT_ALL_TESTS
+	select CRYPTO_LIB_BENCHMARK_VISIBLE
+	help
+	  KUnit tests for the Curve25519 Diffie-Hellman function.
+
+config CRYPTO_LIB_GHASH_KUNIT_TEST
+	tristate "KUnit tests for GHASH" if !KUNIT_ALL_TESTS
+	depends on KUNIT && CRYPTO_LIB_GF128HASH
+	default KUNIT_ALL_TESTS
+	select CRYPTO_LIB_BENCHMARK_VISIBLE
+	help
+	  KUnit tests for the GHASH library functions.
+
+config CRYPTO_LIB_MD5_KUNIT_TEST
+	tristate "KUnit tests for MD5" if !KUNIT_ALL_TESTS
+	depends on KUNIT && CRYPTO_LIB_MD5
+	default KUNIT_ALL_TESTS
+	select CRYPTO_LIB_BENCHMARK_VISIBLE
+	help
+	  KUnit tests for the MD5 cryptographic hash function and its
+	  corresponding HMAC.
+
+config CRYPTO_LIB_MLDSA_KUNIT_TEST
+	tristate "KUnit tests for ML-DSA" if !KUNIT_ALL_TESTS
+	depends on KUNIT && CRYPTO_LIB_MLDSA
+	default KUNIT_ALL_TESTS
+	select CRYPTO_LIB_BENCHMARK_VISIBLE
+	help
+	  KUnit tests for the ML-DSA digital signature algorithm.
+
+config CRYPTO_LIB_NH_KUNIT_TEST
+	tristate "KUnit tests for NH" if !KUNIT_ALL_TESTS
+	depends on KUNIT && CRYPTO_LIB_NH
+	default KUNIT_ALL_TESTS
+	help
+	  KUnit tests for the NH almost-universal hash function.
+
+config CRYPTO_LIB_POLY1305_KUNIT_TEST
+	tristate "KUnit tests for Poly1305" if !KUNIT_ALL_TESTS
+	depends on KUNIT && CRYPTO_LIB_POLY1305
+	default KUNIT_ALL_TESTS
+	select CRYPTO_LIB_BENCHMARK_VISIBLE
+	help
+	  KUnit tests for the Poly1305 library functions.
+
+config CRYPTO_LIB_POLYVAL_KUNIT_TEST
+	tristate "KUnit tests for POLYVAL" if !KUNIT_ALL_TESTS
+	depends on KUNIT && CRYPTO_LIB_GF128HASH
+	default KUNIT_ALL_TESTS
+	select CRYPTO_LIB_BENCHMARK_VISIBLE
+	help
+	  KUnit tests for the POLYVAL library functions.
+
+config CRYPTO_LIB_SHA1_KUNIT_TEST
+	tristate "KUnit tests for SHA-1" if !KUNIT_ALL_TESTS
+	depends on KUNIT && CRYPTO_LIB_SHA1
+	default KUNIT_ALL_TESTS
+	select CRYPTO_LIB_BENCHMARK_VISIBLE
+	help
+	  KUnit tests for the SHA-1 cryptographic hash function and its
+	  corresponding HMAC.
+
+# Option is named *_SHA256_KUNIT_TEST, though both SHA-224 and SHA-256 tests are
+# included, for consistency with the naming used elsewhere (e.g. CRYPTO_SHA256).
+config CRYPTO_LIB_SHA256_KUNIT_TEST
+	tristate "KUnit tests for SHA-224 and SHA-256" if !KUNIT_ALL_TESTS
+	depends on KUNIT && CRYPTO_LIB_SHA256
+	default KUNIT_ALL_TESTS
+	select CRYPTO_LIB_BENCHMARK_VISIBLE
+	help
+	  KUnit tests for the SHA-224 and SHA-256 cryptographic hash functions
+	  and their corresponding HMACs.
+
+# Option is named *_SHA512_KUNIT_TEST, though both SHA-384 and SHA-512 tests are
+# included, for consistency with the naming used elsewhere (e.g. CRYPTO_SHA512).
+config CRYPTO_LIB_SHA512_KUNIT_TEST
+	tristate "KUnit tests for SHA-384 and SHA-512" if !KUNIT_ALL_TESTS
+	depends on KUNIT && CRYPTO_LIB_SHA512
+	default KUNIT_ALL_TESTS
+	select CRYPTO_LIB_BENCHMARK_VISIBLE
+	help
+	  KUnit tests for the SHA-384 and SHA-512 cryptographic hash functions
+	  and their corresponding HMACs.
+
+config CRYPTO_LIB_SHA3_KUNIT_TEST
+	tristate "KUnit tests for SHA-3" if !KUNIT_ALL_TESTS
+	depends on KUNIT && CRYPTO_LIB_SHA3
+	default KUNIT_ALL_TESTS
+	select CRYPTO_LIB_BENCHMARK_VISIBLE
+	help
+	  KUnit tests for the SHA3 cryptographic hash and XOF functions,
+	  including SHA3-224, SHA3-256, SHA3-384, SHA3-512, SHAKE128 and
+	  SHAKE256.
+
+config CRYPTO_LIB_SM3_KUNIT_TEST
+	tristate "KUnit tests for SM3" if !KUNIT_ALL_TESTS
+	depends on KUNIT && CRYPTO_LIB_SM3
+	default KUNIT_ALL_TESTS
+	select CRYPTO_LIB_BENCHMARK_VISIBLE
+	help
+	  KUnit tests for the SM3 cryptographic hash function.
+
+config CRYPTO_LIB_ENABLE_ALL_FOR_KUNIT
+	tristate "Enable all crypto library code for KUnit tests"
+	depends on KUNIT
+	select CRYPTO_LIB_AES_CBC
+	select CRYPTO_LIB_AES_CBC_MACS
+	select CRYPTO_LIB_AES_CCM
+	select CRYPTO_LIB_AES_CTR
+	select CRYPTO_LIB_AES_ECB
+	select CRYPTO_LIB_AES_GCM
+	select CRYPTO_LIB_AES_XTS
+	select CRYPTO_LIB_BLAKE2B
+	select CRYPTO_LIB_CHACHA20POLY1305
+	select CRYPTO_LIB_CURVE25519
+	select CRYPTO_LIB_GF128HASH
+	select CRYPTO_LIB_MD5
+	select CRYPTO_LIB_MLDSA
+	select CRYPTO_LIB_NH
+	select CRYPTO_LIB_POLY1305
+	select CRYPTO_LIB_SHA1
+	select CRYPTO_LIB_SHA256
+	select CRYPTO_LIB_SHA512
+	select CRYPTO_LIB_SHA3
+	select CRYPTO_LIB_SM3
+	help
+	  Enable all the crypto library code that has KUnit tests.
+
+	  Enable this only if you'd like to test all the crypto library code,
+	  even code that wouldn't otherwise need to be built.
+
+	  You'll still need to enable the tests themselves, either individually
+	  or using KUNIT_ALL_TESTS.
+
+config CRYPTO_LIB_BENCHMARK_VISIBLE
+	bool
+
+config CRYPTO_LIB_BENCHMARK
+	bool "Include benchmarks in KUnit tests for cryptographic functions"
+	depends on CRYPTO_LIB_BENCHMARK_VISIBLE
+	help
+	  Include benchmarks in the KUnit tests for cryptographic functions.
+	  The benchmark results are printed to the kernel log when the
+	  corresponding KUnit test suite runs.
+
+	  This is useful for evaluating the performance of the cryptographic
+	  functions.  However, it will increase the runtime of the KUnit tests.
+
+	  If you're only interested in correctness testing, leave this disabled.