Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 67 insertions, 0 deletions

diff --git a/lib/crypto/powerpc/sha1.h b/lib/crypto/powerpc/sha1.h
new file mode 100644
index 000000000..e2c010f03
--- /dev/null
+++ b/lib/crypto/powerpc/sha1.h
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * SHA-1 optimized for PowerPC
+ *
+ * Copyright (c) 2015 Markus Stockhausen <stockhausen@collogia.de>
+ */
+
+#include <asm/switch_to.h>
+#include <linux/preempt.h>
+
+#ifdef CONFIG_SPE
+/*
+ * MAX_BYTES defines the number of bytes that are allowed to be processed
+ * between preempt_disable() and preempt_enable(). SHA1 takes ~1000
+ * operations per 64 bytes. e500 cores can issue two arithmetic instructions
+ * per clock cycle using one 32/64 bit unit (SU1) and one 32 bit unit (SU2).
+ * Thus 2KB of input data will need an estimated maximum of 18,000 cycles.
+ * Headroom for cache misses included. Even with the low end model clocked
+ * at 667 MHz this equals to a critical time window of less than 27us.
+ *
+ */
+#define MAX_BYTES 2048
+
+asmlinkage void ppc_spe_sha1_transform(struct sha1_block_state *state,
+				       const u8 *data, u32 nblocks);
+
+static void spe_begin(void)
+{
+	/* We just start SPE operations and will save SPE registers later. */
+	preempt_disable();
+	enable_kernel_spe();
+}
+
+static void spe_end(void)
+{
+	disable_kernel_spe();
+	/* reenable preemption */
+	preempt_enable();
+}
+
+static void sha1_blocks(struct sha1_block_state *state,
+			const u8 *data, size_t nblocks)
+{
+	do {
+		u32 unit = min_t(size_t, nblocks, MAX_BYTES / SHA1_BLOCK_SIZE);
+
+		spe_begin();
+		ppc_spe_sha1_transform(state, data, unit);
+		spe_end();
+
+		data += unit * SHA1_BLOCK_SIZE;
+		nblocks -= unit;
+	} while (nblocks);
+}
+#else /* CONFIG_SPE */
+asmlinkage void powerpc_sha_transform(struct sha1_block_state *state,
+				      const u8 data[SHA1_BLOCK_SIZE]);
+
+static void sha1_blocks(struct sha1_block_state *state,
+			const u8 *data, size_t nblocks)
+{
+	do {
+		powerpc_sha_transform(state, data);
+		data += SHA1_BLOCK_SIZE;
+	} while (--nblocks);
+}
+#endif /* !CONFIG_SPE */