Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 67 insertions, 0 deletions

diff --git a/lib/crypto/powerpc/sha1.h b/lib/crypto/powerpc/sha1.h
new file mode 100644
index 000000000..e2c010f03
--- /dev/null
+++ b/lib/crypto/powerpc/sha1.h
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * SHA-1 optimized for PowerPC
+ *
+ * Copyright (c) 2015 Markus Stockhausen <stockhausen@collogia.de>
+ */
+
+#include <asm/switch_to.h>
+#include <linux/preempt.h>
+
+#ifdef CONFIG_SPE
+/*
+ * MAX_BYTES defines the number of bytes that are allowed to be processed
+ * between preempt_disable() and preempt_enable(). SHA1 takes ~1000
+ * operations per 64 bytes. e500 cores can issue two arithmetic instructions
+ * per clock cycle using one 32/64 bit unit (SU1) and one 32 bit unit (SU2).
+ * Thus 2KB of input data will need an estimated maximum of 18,000 cycles.
+ * Headroom for cache misses included. Even with the low end model clocked
+ * at 667 MHz this equals to a critical time window of less than 27us.
+ *
+ */
+#define MAX_BYTES 2048
+
+asmlinkage void ppc_spe_sha1_transform(struct sha1_block_state *state,
+				       const u8 *data, u32 nblocks);
+
+static void spe_begin(void)
+{
+	/* We just start SPE operations and will save SPE registers later. */
+	preempt_disable();
+	enable_kernel_spe();
+}
+
+static void spe_end(void)
+{
+	disable_kernel_spe();
+	/* reenable preemption */
+	preempt_enable();
+}
+
+static void sha1_blocks(struct sha1_block_state *state,
+			const u8 *data, size_t nblocks)
+{
+	do {
+		u32 unit = min_t(size_t, nblocks, MAX_BYTES / SHA1_BLOCK_SIZE);
+
+		spe_begin();
+		ppc_spe_sha1_transform(state, data, unit);
+		spe_end();
+
+		data += unit * SHA1_BLOCK_SIZE;
+		nblocks -= unit;
+	} while (nblocks);
+}
+#else /* CONFIG_SPE */
+asmlinkage void powerpc_sha_transform(struct sha1_block_state *state,
+				      const u8 data[SHA1_BLOCK_SIZE]);
+
+static void sha1_blocks(struct sha1_block_state *state,
+			const u8 *data, size_t nblocks)
+{
+	do {
+		powerpc_sha_transform(state, data);
+		data += SHA1_BLOCK_SIZE;
+	} while (--nblocks);
+}
+#endif /* !CONFIG_SPE */