Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 130 insertions, 0 deletions

diff --git a/lib/crc/Kconfig b/lib/crc/Kconfig
new file mode 100644
index 000000000..927fc6a6b
--- /dev/null
+++ b/lib/crc/Kconfig
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+# Kconfig for the kernel's cyclic redundancy check (CRC) library code
+
+config CRC4
+	tristate
+	help
+	  The CRC4 library functions.  Select this if your module uses any of
+	  the functions from <linux/crc4.h>.
+
+config CRC7
+	tristate
+	help
+	  The CRC7 library functions.  Select this if your module uses any of
+	  the functions from <linux/crc7.h>.
+
+config CRC8
+	tristate
+	help
+	  The CRC8 library functions.  Select this if your module uses any of
+	  the functions from <linux/crc8.h>.
+
+config CRC16
+	tristate
+	help
+	  The CRC16 library functions.  Select this if your module uses any of
+	  the functions from <linux/crc16.h>.
+
+config CRC_CCITT
+	tristate
+	help
+	  The CRC-CCITT library functions.  Select this if your module uses any
+	  of the functions from <linux/crc-ccitt.h>.
+
+config CRC_ITU_T
+	tristate
+	help
+	  The CRC-ITU-T library functions.  Select this if your module uses
+	  any of the functions from <linux/crc-itu-t.h>.
+
+config CRC_T10DIF
+	tristate
+	help
+	  The CRC-T10DIF library functions.  Select this if your module uses
+	  any of the functions from <linux/crc-t10dif.h>.
+
+config CRC_T10DIF_ARCH
+	bool
+	depends on CRC_T10DIF && CRC_OPTIMIZATIONS
+	default y if ARM && KERNEL_MODE_NEON
+	default y if ARM64
+	default y if PPC64 && ALTIVEC
+	default y if RISCV && RISCV_ISA_ZBC
+	default y if X86
+
+config CRC32
+	tristate
+	select BITREVERSE
+	help
+	  The CRC32 library functions.  Select this if your module uses any of
+	  the functions from <linux/crc32.h> or <linux/crc32c.h>.
+
+config CRC32_ARCH
+	bool
+	depends on CRC32 && CRC_OPTIMIZATIONS
+	default y if ARM && KERNEL_MODE_NEON
+	default y if ARM64
+	default y if LOONGARCH && 64BIT
+	default y if MIPS && CPU_MIPSR6
+	default y if PPC64 && ALTIVEC
+	default y if RISCV && RISCV_ISA_ZBC
+	default y if S390
+	default y if SPARC64
+	default y if X86
+
+config CRC64
+	tristate
+	help
+	  The CRC64 library functions.  Select this if your module uses any of
+	  the functions from <linux/crc64.h>.
+
+config CRC64_ARCH
+	bool
+	depends on CRC64 && CRC_OPTIMIZATIONS
+	default y if ARM && KERNEL_MODE_NEON && !CPU_BIG_ENDIAN
+	default y if ARM64
+	default y if RISCV && RISCV_ISA_ZBC && 64BIT
+	default y if X86_64
+
+config CRC_OPTIMIZATIONS
+	bool "Enable optimized CRC implementations" if EXPERT
+	depends on !UML
+	default y
+	help
+	  Disabling this option reduces code size slightly by disabling the
+	  architecture-optimized implementations of any CRC variants that are
+	  enabled.  CRC checksumming performance may get much slower.
+
+	  Keep this enabled unless you're really trying to minimize the size of
+	  the kernel.
+
+config CRC_KUNIT_TEST
+	tristate "KUnit tests for CRC functions" if !KUNIT_ALL_TESTS
+	depends on KUNIT && (CRC7 || CRC16 || CRC_T10DIF || CRC32 || CRC64)
+	default KUNIT_ALL_TESTS
+	help
+	  Unit tests for the CRC library functions.
+
+	  This is intended to help people writing architecture-specific
+	  optimized versions.  If unsure, say N.
+
+config CRC_ENABLE_ALL_FOR_KUNIT
+	tristate "Enable all CRC functions for KUnit test"
+	depends on KUNIT
+	select CRC7
+	select CRC16
+	select CRC_T10DIF
+	select CRC32
+	select CRC64
+	help
+	  Enable all CRC functions that have test code in CRC_KUNIT_TEST.
+
+	  Enable this only if you'd like the CRC KUnit test suite to test all
+	  the CRC variants, even ones that wouldn't otherwise need to be built.
+
+config CRC_BENCHMARK
+	bool "Benchmark for the CRC functions"
+	depends on CRC_KUNIT_TEST
+	help
+	  Include benchmarks in the KUnit test suite for the CRC functions.