Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 166 insertions, 0 deletions

diff --git a/lib/Kconfig.kgdb b/lib/Kconfig.kgdb
new file mode 100644
index 000000000..8336b1a48
--- /dev/null
+++ b/lib/Kconfig.kgdb
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config HAVE_ARCH_KGDB
+	bool
+
+# set if architecture has the its kgdb_arch_handle_qxfer_pkt
+# function to enable gdb stub to address XML packet sent from GDB.
+config HAVE_ARCH_KGDB_QXFER_PKT
+	bool
+
+menuconfig KGDB
+	bool "KGDB: kernel debugger"
+	depends on HAVE_ARCH_KGDB
+	depends on DEBUG_KERNEL
+	help
+	  If you say Y here, it will be possible to remotely debug the
+	  kernel using gdb.  It is recommended but not required, that
+	  you also turn on the kernel config option
+	  CONFIG_FRAME_POINTER to aid in producing more reliable stack
+	  backtraces in the external debugger.  Documentation of
+	  kernel debugger is available at http://kgdb.sourceforge.net
+	  as well as in Documentation/process/debugging/kgdb.rst.  If
+	  unsure, say N.
+
+if KGDB
+
+config KGDB_HONOUR_BLOCKLIST
+	bool "KGDB: use kprobe blocklist to prohibit unsafe breakpoints"
+	depends on HAVE_KPROBES
+	depends on MODULES
+	select KPROBES
+	default y
+	help
+	  If set to Y the debug core will use the kprobe blocklist to
+	  identify symbols where it is unsafe to set breakpoints.
+	  In particular this disallows instrumentation of functions
+	  called during debug trap handling and thus makes it very
+	  difficult to inadvertently provoke recursive trap handling.
+
+	  If unsure, say Y.
+
+config KGDB_SERIAL_CONSOLE
+	tristate "KGDB: use kgdb over the serial console"
+	select CONSOLE_POLL
+	select MAGIC_SYSRQ
+	depends on TTY && VT
+	default y
+	help
+	  Share a serial console with kgdb. Sysrq-g must be used
+	  to break in initially.
+
+config KGDB_TESTS
+	bool "KGDB: internal test suite"
+	default n
+	help
+	  This is a kgdb I/O module specifically designed to test
+	  kgdb's internal functions.  This kgdb I/O module is
+	  intended to for the development of new kgdb stubs
+	  as well as regression testing the kgdb internals.
+	  See the drivers/misc/kgdbts.c for the details about
+	  the tests.  The most basic of this I/O module is to boot
+	  a kernel boot arguments "kgdbwait kgdbts=V1F100"
+
+config KGDB_TESTS_ON_BOOT
+	bool "KGDB: Run tests on boot"
+	depends on KGDB_TESTS
+	default n
+	help
+	  Run the kgdb tests on boot up automatically without the need
+	  to pass in a kernel parameter
+
+config KGDB_TESTS_BOOT_STRING
+	string "KGDB: which internal kgdb tests to run"
+	depends on KGDB_TESTS_ON_BOOT
+	default "V1F100"
+	help
+	  This is the command string to send the kgdb test suite on
+	  boot.  See the drivers/misc/kgdbts.c for detailed
+	  information about other strings you could use beyond the
+	  default of V1F100.
+
+config KGDB_LOW_LEVEL_TRAP
+       bool "KGDB: Allow debugging with traps in notifiers"
+       depends on X86 || MIPS
+       default n
+       help
+	 This will add an extra call back to kgdb for the breakpoint
+	 exception handler which will allow kgdb to step through a
+	 notify handler.
+
+config KGDB_KDB
+	bool "KGDB_KDB: include kdb frontend for kgdb"
+	default n
+	help
+	  KDB frontend for kernel
+
+config KDB_DEFAULT_ENABLE
+	hex "KDB: Select kdb command functions to be enabled by default"
+	depends on KGDB_KDB
+	default 0x1
+	help
+	  Specifiers which kdb commands are enabled by default. This may
+	  be set to 1 or 0 to enable all commands or disable almost all
+	  commands.
+
+	  Alternatively the following bitmask applies:
+
+	    0x0002 - allow arbitrary reads from memory and symbol lookup
+	    0x0004 - allow arbitrary writes to memory
+	    0x0008 - allow current register state to be inspected
+	    0x0010 - allow current register state to be modified
+	    0x0020 - allow passive inspection (backtrace, process list, lsmod)
+	    0x0040 - allow flow control management (breakpoint, single step)
+	    0x0080 - enable signalling of processes
+	    0x0100 - allow machine to be rebooted
+
+	  The config option merely sets the default at boot time. Both
+	  issuing 'echo X > /sys/module/kdb/parameters/cmd_enable' or
+	  setting with kdb.cmd_enable=X kernel command line option will
+	  override the default settings.
+
+config KDB_KEYBOARD
+	bool "KGDB_KDB: keyboard as input device"
+	depends on VT && KGDB_KDB && !PARISC
+	depends on HAS_IOPORT
+	default n
+	help
+	  KDB can use a PS/2 type keyboard for an input device
+
+config KDB_CONTINUE_CATASTROPHIC
+	int "KDB: continue after catastrophic errors"
+	depends on KGDB_KDB
+	default "0"
+	help
+	  This integer controls the behaviour of kdb when the kernel gets a
+	  catastrophic error, i.e. for a panic or oops.
+	  When KDB is active and a catastrophic error occurs, nothing extra
+	  will happen until you type 'go'.
+	  CONFIG_KDB_CONTINUE_CATASTROPHIC == 0 (default). The first time
+	  you type 'go', you will be warned by kdb. The secend time you type
+	  'go', KDB tries to continue. No guarantees that the
+	  kernel is still usable in this situation.
+	  CONFIG_KDB_CONTINUE_CATASTROPHIC == 1. KDB tries to continue.
+	  No guarantees that the kernel is still usable in this situation.
+	  CONFIG_KDB_CONTINUE_CATASTROPHIC == 2. KDB forces a reboot.
+	  If you are not sure, say 0.
+
+config ARCH_HAS_EARLY_DEBUG
+	bool
+	default n
+	help
+	  If an architecture can definitely handle entering the debugger
+	  when early_param's are parsed then it select this config.
+	  Otherwise, if "kgdbwait" is passed on the kernel command line it
+	  won't actually be processed until dbg_late_init() just after the
+	  call to kgdb_arch_late() is made.
+
+	  NOTE: Even if this isn't selected by an architecture we will
+	  still try to register kgdb to handle breakpoints and crashes
+	  when early_param's are parsed, we just won't act on the
+	  "kgdbwait" parameter until dbg_late_init().  If you get a
+	  crash and try to drop into kgdb somewhere between these two
+	  places you might or might not end up being able to use kgdb
+	  depending on exactly how far along the architecture has initted.
+
+endif # KGDB