iio: proximity: vl53l0x-i2c: claim direct mode for raw readsgrafted

vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.

The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.

Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.

Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

1 files changed, 102 insertions, 0 deletions

diff --git a/include/xen/interface/features.h b/include/xen/interface/features.h
new file mode 100644
index 000000000..53f760378
--- /dev/null
+++ b/include/xen/interface/features.h
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: MIT */
+/******************************************************************************
+ * features.h
+ *
+ * Feature flags, reported by XENVER_get_features.
+ *
+ * Copyright (c) 2006, Keir Fraser <keir@xensource.com>
+ */
+
+#ifndef __XEN_PUBLIC_FEATURES_H__
+#define __XEN_PUBLIC_FEATURES_H__
+
+/*
+ * If set, the guest does not need to write-protect its pagetables, and can
+ * update them via direct writes.
+ */
+#define XENFEAT_writable_page_tables       0
+
+/*
+ * If set, the guest does not need to write-protect its segment descriptor
+ * tables, and can update them via direct writes.
+ */
+#define XENFEAT_writable_descriptor_tables 1
+
+/*
+ * If set, translation between the guest's 'pseudo-physical' address space
+ * and the host's machine address space are handled by the hypervisor. In this
+ * mode the guest does not need to perform phys-to/from-machine translations
+ * when performing page table operations.
+ */
+#define XENFEAT_auto_translated_physmap    2
+
+/* If set, the guest is running in supervisor mode (e.g., x86 ring 0). */
+#define XENFEAT_supervisor_mode_kernel     3
+
+/*
+ * If set, the guest does not need to allocate x86 PAE page directories
+ * below 4GB. This flag is usually implied by auto_translated_physmap.
+ */
+#define XENFEAT_pae_pgdir_above_4gb        4
+
+/* x86: Does this Xen host support the MMU_PT_UPDATE_PRESERVE_AD hypercall? */
+#define XENFEAT_mmu_pt_update_preserve_ad  5
+
+/* x86: Does this Xen host support the MMU_{CLEAR,COPY}_PAGE hypercall? */
+#define XENFEAT_highmem_assist             6
+
+/*
+ * If set, GNTTABOP_map_grant_ref honors flags to be placed into guest kernel
+ * available pte bits.
+ */
+#define XENFEAT_gnttab_map_avail_bits      7
+
+/* x86: Does this Xen host support the HVM callback vector type? */
+#define XENFEAT_hvm_callback_vector        8
+
+/* x86: pvclock algorithm is safe to use on HVM */
+#define XENFEAT_hvm_safe_pvclock           9
+
+/* x86: pirq can be used by HVM guests */
+#define XENFEAT_hvm_pirqs           10
+
+/* operation as Dom0 is supported */
+#define XENFEAT_dom0                      11
+
+/* Xen also maps grant references at pfn = mfn.
+ * This feature flag is deprecated and should not be used.
+#define XENFEAT_grant_map_identity        12
+ */
+
+/* Guest can use XENMEMF_vnode to specify virtual node for memory op. */
+#define XENFEAT_memory_op_vnode_supported 13
+
+/* arm: Hypervisor supports ARM SMC calling convention. */
+#define XENFEAT_ARM_SMCCC_supported       14
+
+/*
+ * x86/PVH: If set, ACPI RSDP can be placed at any address. Otherwise RSDP
+ * must be located in lower 1MB, as required by ACPI Specification for IA-PC
+ * systems.
+ * This feature flag is only consulted if XEN_ELFNOTE_GUEST_OS contains
+ * the "linux" string.
+ */
+#define XENFEAT_linux_rsdp_unrestricted   15
+
+/*
+ * A direct-mapped (or 1:1 mapped) domain is a domain for which its
+ * local pages have gfn == mfn. If a domain is direct-mapped,
+ * XENFEAT_direct_mapped is set; otherwise XENFEAT_not_direct_mapped
+ * is set.
+ *
+ * If neither flag is set (e.g. older Xen releases) the assumptions are:
+ * - not auto_translated domains (x86 only) are always direct-mapped
+ * - on x86, auto_translated domains are not direct-mapped
+ * - on ARM, Dom0 is direct-mapped, DomUs are not
+ */
+#define XENFEAT_not_direct_mapped         16
+#define XENFEAT_direct_mapped             17
+
+#define XENFEAT_NR_SUBMAPS 1
+
+#endif /* __XEN_PUBLIC_FEATURES_H__ */