drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 86 insertions, 0 deletions

diff --git a/include/uapi/regulator/regulator.h b/include/uapi/regulator/regulator.h
new file mode 100644
index 000000000..c4f2d1c19
--- /dev/null
+++ b/include/uapi/regulator/regulator.h
@@ -0,0 +1,86 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Regulator uapi header
+ *
+ * Author: Naresh Solanki <Naresh.Solanki@9elements.com>
+ */
+
+#ifndef _UAPI_REGULATOR_H
+#define _UAPI_REGULATOR_H
+
+#include <linux/types.h>
+
+/*
+ * Regulator notifier events.
+ *
+ * UNDER_VOLTAGE  Regulator output is under voltage.
+ * OVER_CURRENT   Regulator output current is too high.
+ * REGULATION_OUT Regulator output is out of regulation.
+ * FAIL           Regulator output has failed.
+ * OVER_TEMP      Regulator over temp.
+ * FORCE_DISABLE  Regulator forcibly shut down by software.
+ * VOLTAGE_CHANGE Regulator voltage changed.
+ *                Data passed is old voltage cast to (void *).
+ * DISABLE        Regulator was disabled.
+ * PRE_VOLTAGE_CHANGE   Regulator is about to have voltage changed.
+ *                      Data passed is "struct pre_voltage_change_data"
+ * ABORT_VOLTAGE_CHANGE Regulator voltage change failed for some reason.
+ *                      Data passed is old voltage cast to (void *).
+ * PRE_DISABLE    Regulator is about to be disabled
+ * ABORT_DISABLE  Regulator disable failed for some reason
+ *
+ * NOTE: These events can be OR'ed together when passed into handler.
+ */
+
+#define REGULATOR_EVENT_UNDER_VOLTAGE		0x01
+#define REGULATOR_EVENT_OVER_CURRENT		0x02
+#define REGULATOR_EVENT_REGULATION_OUT		0x04
+#define REGULATOR_EVENT_FAIL			0x08
+#define REGULATOR_EVENT_OVER_TEMP		0x10
+#define REGULATOR_EVENT_FORCE_DISABLE		0x20
+#define REGULATOR_EVENT_VOLTAGE_CHANGE		0x40
+#define REGULATOR_EVENT_DISABLE			0x80
+#define REGULATOR_EVENT_PRE_VOLTAGE_CHANGE	0x100
+#define REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE	0x200
+#define REGULATOR_EVENT_PRE_DISABLE		0x400
+#define REGULATOR_EVENT_ABORT_DISABLE		0x800
+#define REGULATOR_EVENT_ENABLE			0x1000
+/*
+ * Following notifications should be emitted only if detected condition
+ * is such that the HW is likely to still be working but consumers should
+ * take a recovery action to prevent problems escalating into errors.
+ */
+#define REGULATOR_EVENT_UNDER_VOLTAGE_WARN	0x2000
+#define REGULATOR_EVENT_OVER_CURRENT_WARN	0x4000
+#define REGULATOR_EVENT_OVER_VOLTAGE_WARN	0x8000
+#define REGULATOR_EVENT_OVER_TEMP_WARN		0x10000
+#define REGULATOR_EVENT_WARN_MASK		0x1E000
+
+struct reg_genl_event {
+	char reg_name[32];
+	__u64 event;
+};
+
+/* attributes of reg_genl_family */
+enum {
+	REG_GENL_ATTR_UNSPEC,
+	REG_GENL_ATTR_EVENT,	/* reg event info needed by user space */
+	__REG_GENL_ATTR_MAX,
+};
+
+#define REG_GENL_ATTR_MAX (__REG_GENL_ATTR_MAX - 1)
+
+/* commands supported by the reg_genl_family */
+enum {
+	REG_GENL_CMD_UNSPEC,
+	REG_GENL_CMD_EVENT,	/* kernel->user notifications for reg events */
+	__REG_GENL_CMD_MAX,
+};
+
+#define REG_GENL_CMD_MAX (__REG_GENL_CMD_MAX - 1)
+
+#define REG_GENL_FAMILY_NAME		"reg_event"
+#define REG_GENL_VERSION		0x01
+#define REG_GENL_MCAST_GROUP_NAME	"reg_mc_group"
+
+#endif /* _UAPI_REGULATOR_H */