iio: proximity: vl53l0x-i2c: claim direct mode for raw readsgrafted

vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.

The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.

Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.

Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

2 files changed, 78 insertions, 0 deletions

diff --git a/include/uapi/misc/uacce/hisi_qm.h b/include/uapi/misc/uacce/hisi_qm.h
new file mode 100644
index 000000000..10504b48e
--- /dev/null
+++ b/include/uapi/misc/uacce/hisi_qm.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+#ifndef _UAPI_HISI_QM_H
+#define _UAPI_HISI_QM_H
+
+#include <linux/types.h>
+
+/**
+ * struct hisi_qp_ctx - User data for hisi qp.
+ * @id: qp_index return to user space
+ * @qc_type: Accelerator algorithm type
+ */
+struct hisi_qp_ctx {
+	__u16 id;
+	__u16 qc_type;
+};
+
+/**
+ * struct hisi_qp_info - User data for hisi qp.
+ * @sqe_size: Submission queue element size
+ * @sq_depth: The number of sqe
+ * @cq_depth: The number of cqe
+ * @reserved: Reserved data
+ */
+struct hisi_qp_info {
+	__u32 sqe_size;
+	__u16 sq_depth;
+	__u16 cq_depth;
+	__u64 reserved;
+};
+
+#define HISI_QM_API_VER_BASE "hisi_qm_v1"
+#define HISI_QM_API_VER2_BASE "hisi_qm_v2"
+#define HISI_QM_API_VER3_BASE "hisi_qm_v3"
+#define HISI_QM_API_VER5_BASE "hisi_qm_v5"
+
+/* UACCE_CMD_QM_SET_QP_CTX: Set qp algorithm type */
+#define UACCE_CMD_QM_SET_QP_CTX	_IOWR('H', 10, struct hisi_qp_ctx)
+/* UACCE_CMD_QM_SET_QP_INFO: Set qp depth and BD size */
+#define UACCE_CMD_QM_SET_QP_INFO _IOWR('H', 11, struct hisi_qp_info)
+#endif
diff --git a/include/uapi/misc/uacce/uacce.h b/include/uapi/misc/uacce/uacce.h
new file mode 100644
index 000000000..cc7185678
--- /dev/null
+++ b/include/uapi/misc/uacce/uacce.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+#ifndef _UAPIUUACCE_H
+#define _UAPIUUACCE_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+/*
+ * UACCE_CMD_START_Q: Start queue
+ */
+#define UACCE_CMD_START_Q	_IO('W', 0)
+
+/*
+ * UACCE_CMD_PUT_Q:
+ * User actively stop queue and free queue resource immediately
+ * Optimization method since close fd may delay
+ */
+#define UACCE_CMD_PUT_Q		_IO('W', 1)
+
+/*
+ * UACCE Device flags:
+ * UACCE_DEV_SVA: Shared Virtual Addresses
+ *		  Support PASID
+ *		  Support device page faults (PCI PRI or SMMU Stall)
+ */
+#define UACCE_DEV_SVA		BIT(0)
+
+/**
+ * enum uacce_qfrt: queue file region type
+ * @UACCE_QFRT_MMIO: device mmio region
+ * @UACCE_QFRT_DUS: device user share region
+ */
+enum uacce_qfrt {
+	UACCE_QFRT_MMIO = 0,
+	UACCE_QFRT_DUS = 1,
+};
+
+#endif