iio: proximity: vl53l0x-i2c: claim direct mode for raw readsgrafted

vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.

The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.

Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.

Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

1 files changed, 73 insertions, 0 deletions

diff --git a/include/uapi/asm-generic/stat.h b/include/uapi/asm-generic/stat.h
new file mode 100644
index 000000000..0d962ecd1
--- /dev/null
+++ b/include/uapi/asm-generic/stat.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __ASM_GENERIC_STAT_H
+#define __ASM_GENERIC_STAT_H
+
+/*
+ * Everybody gets this wrong and has to stick with it for all
+ * eternity. Hopefully, this version gets used by new architectures
+ * so they don't fall into the same traps.
+ *
+ * stat64 is copied from powerpc64, with explicit padding added.
+ * stat is the same structure layout on 64-bit, without the 'long long'
+ * types.
+ *
+ * By convention, 64 bit architectures use the stat interface, while
+ * 32 bit architectures use the stat64 interface. Note that we don't
+ * provide an __old_kernel_stat here, which new architecture should
+ * not have to start with.
+ */
+
+#include <asm/bitsperlong.h>
+
+#define STAT_HAVE_NSEC 1
+
+struct stat {
+	unsigned long	st_dev;		/* Device.  */
+	unsigned long	st_ino;		/* File serial number.  */
+	unsigned int	st_mode;	/* File mode.  */
+	unsigned int	st_nlink;	/* Link count.  */
+	unsigned int	st_uid;		/* User ID of the file's owner.  */
+	unsigned int	st_gid;		/* Group ID of the file's group. */
+	unsigned long	st_rdev;	/* Device number, if device.  */
+	unsigned long	__pad1;
+	long		st_size;	/* Size of file, in bytes.  */
+	int		st_blksize;	/* Optimal block size for I/O.  */
+	int		__pad2;
+	long		st_blocks;	/* Number 512-byte blocks allocated. */
+	long		st_atime;	/* Time of last access.  */
+	unsigned long	st_atime_nsec;
+	long		st_mtime;	/* Time of last modification.  */
+	unsigned long	st_mtime_nsec;
+	long		st_ctime;	/* Time of last status change.  */
+	unsigned long	st_ctime_nsec;
+	unsigned int	__unused4;
+	unsigned int	__unused5;
+};
+
+/* This matches struct stat64 in glibc2.1. Only used for 32 bit. */
+#if __BITS_PER_LONG != 64 || defined(__ARCH_WANT_STAT64)
+struct stat64 {
+	unsigned long long st_dev;	/* Device.  */
+	unsigned long long st_ino;	/* File serial number.  */
+	unsigned int	st_mode;	/* File mode.  */
+	unsigned int	st_nlink;	/* Link count.  */
+	unsigned int	st_uid;		/* User ID of the file's owner.  */
+	unsigned int	st_gid;		/* Group ID of the file's group. */
+	unsigned long long st_rdev;	/* Device number, if device.  */
+	unsigned long long __pad1;
+	long long	st_size;	/* Size of file, in bytes.  */
+	int		st_blksize;	/* Optimal block size for I/O.  */
+	int		__pad2;
+	long long	st_blocks;	/* Number 512-byte blocks allocated. */
+	int		st_atime;	/* Time of last access.  */
+	unsigned int	st_atime_nsec;
+	int		st_mtime;	/* Time of last modification.  */
+	unsigned int	st_mtime_nsec;
+	int		st_ctime;	/* Time of last status change.  */
+	unsigned int	st_ctime_nsec;
+	unsigned int	__unused4;
+	unsigned int	__unused5;
+};
+#endif
+
+#endif /* __ASM_GENERIC_STAT_H */