Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 205 insertions, 0 deletions

diff --git a/include/sound/sof/dai-intel.h b/include/sound/sof/dai-intel.h
new file mode 100644
index 000000000..e4e710b43
--- /dev/null
+++ b/include/sound/sof/dai-intel.h
@@ -0,0 +1,205 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
+/*
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * Copyright(c) 2018 Intel Corporation
+ */
+
+#ifndef __INCLUDE_SOUND_SOF_DAI_INTEL_H__
+#define __INCLUDE_SOUND_SOF_DAI_INTEL_H__
+
+#include <sound/sof/header.h>
+
+ /* ssc1: TINTE */
+#define SOF_DAI_INTEL_SSP_QUIRK_TINTE		(1 << 0)
+ /* ssc1: PINTE */
+#define SOF_DAI_INTEL_SSP_QUIRK_PINTE		(1 << 1)
+ /* ssc2: SMTATF */
+#define SOF_DAI_INTEL_SSP_QUIRK_SMTATF		(1 << 2)
+ /* ssc2: MMRATF */
+#define SOF_DAI_INTEL_SSP_QUIRK_MMRATF		(1 << 3)
+ /* ssc2: PSPSTWFDFD */
+#define SOF_DAI_INTEL_SSP_QUIRK_PSPSTWFDFD	(1 << 4)
+ /* ssc2: PSPSRWFDFD */
+#define SOF_DAI_INTEL_SSP_QUIRK_PSPSRWFDFD	(1 << 5)
+/* ssc1: LBM */
+#define SOF_DAI_INTEL_SSP_QUIRK_LBM		(1 << 6)
+
+ /* here is the possibility to define others aux macros */
+
+#define SOF_DAI_INTEL_SSP_FRAME_PULSE_WIDTH_MAX		38
+#define SOF_DAI_INTEL_SSP_SLOT_PADDING_MAX		31
+
+/* SSP clocks control settings
+ *
+ * Macros for clks_control field in sof_ipc_dai_ssp_params struct.
+ */
+
+/* mclk 0 disable */
+#define SOF_DAI_INTEL_SSP_MCLK_0_DISABLE		BIT(0)
+/* mclk 1 disable */
+#define SOF_DAI_INTEL_SSP_MCLK_1_DISABLE		BIT(1)
+/* mclk keep active */
+#define SOF_DAI_INTEL_SSP_CLKCTRL_MCLK_KA		BIT(2)
+/* bclk keep active */
+#define SOF_DAI_INTEL_SSP_CLKCTRL_BCLK_KA		BIT(3)
+/* fs keep active */
+#define SOF_DAI_INTEL_SSP_CLKCTRL_FS_KA			BIT(4)
+/* bclk idle */
+#define SOF_DAI_INTEL_SSP_CLKCTRL_BCLK_IDLE_HIGH	BIT(5)
+/* mclk early start */
+#define SOF_DAI_INTEL_SSP_CLKCTRL_MCLK_ES               BIT(6)
+/* bclk early start */
+#define SOF_DAI_INTEL_SSP_CLKCTRL_BCLK_ES               BIT(7)
+/* mclk always on */
+#define SOF_DAI_INTEL_SSP_CLKCTRL_MCLK_AON		BIT(8)
+
+/* DMIC max. four controllers for eight microphone channels */
+#define SOF_DAI_INTEL_DMIC_NUM_CTRL			4
+
+/* SSP Configuration Request - SOF_IPC_DAI_SSP_CONFIG */
+struct sof_ipc_dai_ssp_params {
+	struct sof_ipc_hdr hdr;
+	uint16_t reserved1;
+	uint16_t mclk_id;
+
+	uint32_t mclk_rate;	/* mclk frequency in Hz */
+	uint32_t fsync_rate;	/* fsync frequency in Hz */
+	uint32_t bclk_rate;	/* bclk frequency in Hz */
+
+	/* TDM */
+	uint32_t tdm_slots;
+	uint32_t rx_slots;
+	uint32_t tx_slots;
+
+	/* data */
+	uint32_t sample_valid_bits;
+	uint16_t tdm_slot_width;
+	uint16_t reserved2;	/* alignment */
+
+	/* MCLK */
+	uint32_t mclk_direction;
+
+	uint16_t frame_pulse_width;
+	uint16_t tdm_per_slot_padding_flag;
+	uint32_t clks_control;
+	uint32_t quirks;
+	uint32_t bclk_delay;	/* guaranteed time (ms) for which BCLK
+				 * will be driven, before sending data
+				 */
+} __packed;
+
+/* HDA Configuration Request - SOF_IPC_DAI_HDA_CONFIG */
+struct sof_ipc_dai_hda_params {
+	struct sof_ipc_hdr hdr;
+	uint32_t link_dma_ch;
+	uint32_t rate;
+	uint32_t channels;
+} __packed;
+
+/* ALH Configuration Request - SOF_IPC_DAI_ALH_CONFIG */
+struct sof_ipc_dai_alh_params {
+	struct sof_ipc_hdr hdr;
+	uint32_t stream_id;
+	uint32_t rate;
+	uint32_t channels;
+
+	/* reserved for future use */
+	uint32_t reserved[13];
+} __packed;
+
+/* DMIC Configuration Request - SOF_IPC_DAI_DMIC_CONFIG */
+
+/* This struct is defined per 2ch PDM controller available in the platform.
+ * Normally it is sufficient to set the used microphone specific enables to 1
+ * and keep other parameters as zero. The customizations are:
+ *
+ * 1. If a device mixes different microphones types with different polarity
+ * and/or the absolute polarity matters the PCM signal from a microphone
+ * can be inverted with the controls.
+ *
+ * 2. If the microphones in a stereo pair do not appear in captured stream
+ * in desired order due to board schematics choises they can be swapped with
+ * the clk_edge parameter.
+ *
+ * 3. If PDM bit errors are seen in capture (poor quality) the skew parameter
+ * that delays the sampling time of data by half cycles of DMIC source clock
+ * can be tried for improvement. However there is no guarantee for this to fix
+ * data integrity problems.
+ */
+struct sof_ipc_dai_dmic_pdm_ctrl {
+	struct sof_ipc_hdr hdr;
+	uint16_t id;		/**< PDM controller ID */
+
+	uint16_t enable_mic_a;	/**< Use A (left) channel mic (0 or 1)*/
+	uint16_t enable_mic_b;	/**< Use B (right) channel mic (0 or 1)*/
+
+	uint16_t polarity_mic_a; /**< Optionally invert mic A signal (0 or 1) */
+	uint16_t polarity_mic_b; /**< Optionally invert mic B signal (0 or 1) */
+
+	uint16_t clk_edge;	/**< Optionally swap data clock edge (0 or 1) */
+	uint16_t skew;		/**< Adjust PDM data sampling vs. clock (0..15) */
+
+	uint16_t reserved[3];	/**< Make sure the total size is 4 bytes aligned */
+} __packed;
+
+/* This struct contains the global settings for all 2ch PDM controllers. The
+ * version number used in configuration data is checked vs. version used by
+ * device driver src/drivers/dmic.c need to match. It is incremented from
+ * initial value 1 if updates done for the to driver would alter the operation
+ * of the microphone.
+ *
+ * Note: The microphone clock (pdmclk_min, pdmclk_max, duty_min, duty_max)
+ * parameters need to be set as defined in microphone data sheet. E.g. clock
+ * range 1.0 - 3.2 MHz is usually supported microphones. Some microphones are
+ * multi-mode capable and there may be denied mic clock frequencies between
+ * the modes. In such case set the clock range limits of the desired mode to
+ * avoid the driver to set clock to an illegal rate.
+ *
+ * The duty cycle could be set to 48-52% if not known. Generally these
+ * parameters can be altered within data sheet specified limits to match
+ * required audio application performance power.
+ *
+ * The microphone clock needs to be usually about 50-80 times the used audio
+ * sample rate. With highest sample rates above 48 kHz this can relaxed
+ * somewhat.
+ *
+ * The parameter wake_up_time describes how long time the microphone needs
+ * for the data line to produce valid output from mic clock start. The driver
+ * will mute the captured audio for the given time. The min_clock_on_time
+ * parameter is used to prevent too short clock bursts to happen. The driver
+ * will keep the clock active after capture stop if this time is not yet
+ * met. The unit for both is microseconds (us). Exceed of 100 ms will be
+ * treated as an error.
+ */
+struct sof_ipc_dai_dmic_params {
+	struct sof_ipc_hdr hdr;
+	uint32_t driver_ipc_version;	/**< Version (1..N) */
+
+	uint32_t pdmclk_min;	/**< Minimum microphone clock in Hz (100000..N) */
+	uint32_t pdmclk_max;	/**< Maximum microphone clock in Hz (min...N) */
+
+	uint32_t fifo_fs;	/**< FIFO sample rate in Hz (8000..96000) */
+	uint32_t reserved_1;	/**< Reserved */
+	uint16_t fifo_bits;	/**< FIFO word length (16 or 32) */
+	uint16_t fifo_bits_b;	/**< Deprecated since firmware ABI 3.0.1 */
+
+	uint16_t duty_min;	/**< Min. mic clock duty cycle in % (20..80) */
+	uint16_t duty_max;	/**< Max. mic clock duty cycle in % (min..80) */
+
+	uint32_t num_pdm_active; /**< Number of active pdm controllers. */
+				 /**< Range is 1..SOF_DAI_INTEL_DMIC_NUM_CTRL */
+
+	uint32_t wake_up_time;      /**< Time from clock start to data (us) */
+	uint32_t min_clock_on_time; /**< Min. time that clk is kept on (us) */
+	uint32_t unmute_ramp_time;  /**< Length of logarithmic gain ramp (ms) */
+
+	/* reserved for future use */
+	uint32_t reserved[5];
+
+	/**< PDM controllers configuration */
+	struct sof_ipc_dai_dmic_pdm_ctrl pdm[SOF_DAI_INTEL_DMIC_NUM_CTRL];
+} __packed;
+
+#endif