Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 116 insertions, 0 deletions

diff --git a/include/sound/jack.h b/include/sound/jack.h
new file mode 100644
index 000000000..715b95983
--- /dev/null
+++ b/include/sound/jack.h
@@ -0,0 +1,116 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef __SOUND_JACK_H
+#define __SOUND_JACK_H
+
+/*
+ *  Jack abstraction layer
+ *
+ *  Copyright 2008 Wolfson Microelectronics plc
+ */
+
+#include <sound/core.h>
+
+struct input_dev;
+
+/**
+ * enum snd_jack_types - Jack types which can be reported
+ * @SND_JACK_HEADPHONE: Headphone
+ * @SND_JACK_MICROPHONE: Microphone
+ * @SND_JACK_HEADSET: Headset
+ * @SND_JACK_LINEOUT: Line out
+ * @SND_JACK_MECHANICAL: Mechanical switch
+ * @SND_JACK_VIDEOOUT: Video out
+ * @SND_JACK_AVOUT: AV (Audio Video) out
+ * @SND_JACK_LINEIN:  Line in
+ * @SND_JACK_USB: USB audio device
+ * @SND_JACK_BTN_0: Button 0
+ * @SND_JACK_BTN_1: Button 1
+ * @SND_JACK_BTN_2: Button 2
+ * @SND_JACK_BTN_3: Button 3
+ * @SND_JACK_BTN_4: Button 4
+ * @SND_JACK_BTN_5: Button 5
+ *
+ * These values are used as a bitmask.
+ *
+ * Note that this must be kept in sync with the lookup table in
+ * sound/core/jack.c.
+ */
+enum snd_jack_types {
+	SND_JACK_HEADPHONE	= 0x0001,
+	SND_JACK_MICROPHONE	= 0x0002,
+	SND_JACK_HEADSET	= SND_JACK_HEADPHONE | SND_JACK_MICROPHONE,
+	SND_JACK_LINEOUT	= 0x0004,
+	SND_JACK_MECHANICAL	= 0x0008, /* If detected separately */
+	SND_JACK_VIDEOOUT	= 0x0010,
+	SND_JACK_AVOUT		= SND_JACK_LINEOUT | SND_JACK_VIDEOOUT,
+	SND_JACK_LINEIN		= 0x0020,
+	SND_JACK_USB		= 0x0040,
+
+	/* Kept separate from switches to facilitate implementation */
+	SND_JACK_BTN_0		= 0x4000,
+	SND_JACK_BTN_1		= 0x2000,
+	SND_JACK_BTN_2		= 0x1000,
+	SND_JACK_BTN_3		= 0x0800,
+	SND_JACK_BTN_4		= 0x0400,
+	SND_JACK_BTN_5		= 0x0200,
+};
+
+/* Keep in sync with definitions above */
+#define SND_JACK_SWITCH_TYPES 7
+
+struct snd_jack {
+	struct list_head kctl_list;
+	struct snd_card *card;
+	const char *id;
+#ifdef CONFIG_SND_JACK_INPUT_DEV
+	struct input_dev *input_dev;
+	struct mutex input_dev_lock;
+	int registered;
+	int type;
+	char name[100];
+	unsigned int key[6];   /* Keep in sync with definitions above */
+#endif /* CONFIG_SND_JACK_INPUT_DEV */
+	int hw_status_cache;
+	void *private_data;
+	void (*private_free)(struct snd_jack *);
+};
+
+#ifdef CONFIG_SND_JACK
+
+int snd_jack_new(struct snd_card *card, const char *id, int type,
+		 struct snd_jack **jack, bool initial_kctl, bool phantom_jack);
+int snd_jack_add_new_kctl(struct snd_jack *jack, const char * name, int mask);
+#ifdef CONFIG_SND_JACK_INPUT_DEV
+int snd_jack_set_key(struct snd_jack *jack, enum snd_jack_types type,
+		     int keytype);
+#endif
+void snd_jack_report(struct snd_jack *jack, int status);
+
+#else
+static inline int snd_jack_new(struct snd_card *card, const char *id, int type,
+			       struct snd_jack **jack, bool initial_kctl, bool phantom_jack)
+{
+	return 0;
+}
+
+static inline int snd_jack_add_new_kctl(struct snd_jack *jack, const char * name, int mask)
+{
+	return 0;
+}
+
+static inline void snd_jack_report(struct snd_jack *jack, int status)
+{
+}
+
+#endif
+
+#if !defined(CONFIG_SND_JACK) || !defined(CONFIG_SND_JACK_INPUT_DEV)
+static inline int snd_jack_set_key(struct snd_jack *jack,
+				   enum snd_jack_types type,
+				   int keytype)
+{
+	return 0;
+}
+#endif /* !CONFIG_SND_JACK || !CONFIG_SND_JACK_INPUT_DEV */
+
+#endif