Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 74 insertions, 0 deletions

diff --git a/include/scsi/scsi_status.h b/include/scsi/scsi_status.h
new file mode 100644
index 000000000..9cb85262d
--- /dev/null
+++ b/include/scsi/scsi_status.h
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _SCSI_SCSI_STATUS_H
+#define _SCSI_SCSI_STATUS_H
+
+#include <linux/types.h>
+#include <scsi/scsi_proto.h>
+
+/* Message codes. */
+enum scsi_msg_byte {
+	COMMAND_COMPLETE	= 0x00,
+	EXTENDED_MESSAGE	= 0x01,
+	SAVE_POINTERS		= 0x02,
+	RESTORE_POINTERS	= 0x03,
+	DISCONNECT		= 0x04,
+	INITIATOR_ERROR		= 0x05,
+	ABORT_TASK_SET		= 0x06,
+	MESSAGE_REJECT		= 0x07,
+	NOP			= 0x08,
+	MSG_PARITY_ERROR	= 0x09,
+	LINKED_CMD_COMPLETE	= 0x0a,
+	LINKED_FLG_CMD_COMPLETE	= 0x0b,
+	TARGET_RESET		= 0x0c,
+	ABORT_TASK		= 0x0d,
+	CLEAR_TASK_SET		= 0x0e,
+	INITIATE_RECOVERY	= 0x0f,            /* SCSI-II only */
+	RELEASE_RECOVERY	= 0x10,            /* SCSI-II only */
+	TERMINATE_IO_PROC	= 0x11,            /* SCSI-II only */
+	CLEAR_ACA		= 0x16,
+	LOGICAL_UNIT_RESET	= 0x17,
+	SIMPLE_QUEUE_TAG	= 0x20,
+	HEAD_OF_QUEUE_TAG	= 0x21,
+	ORDERED_QUEUE_TAG	= 0x22,
+	IGNORE_WIDE_RESIDUE	= 0x23,
+	ACA			= 0x24,
+	QAS_REQUEST		= 0x55,
+
+	/* Old SCSI2 names, don't use in new code */
+	BUS_DEVICE_RESET	= TARGET_RESET,
+	ABORT			= ABORT_TASK_SET,
+};
+
+/* Host byte codes. */
+enum scsi_host_status {
+	DID_OK		= 0x00,	/* NO error                                */
+	DID_NO_CONNECT	= 0x01,	/* Couldn't connect before timeout period  */
+	DID_BUS_BUSY	= 0x02,	/* BUS stayed busy through time out period */
+	DID_TIME_OUT	= 0x03,	/* TIMED OUT for other reason              */
+	DID_BAD_TARGET	= 0x04,	/* BAD target.                             */
+	DID_ABORT	= 0x05,	/* Told to abort for some other reason     */
+	DID_PARITY	= 0x06,	/* Parity error                            */
+	DID_ERROR	= 0x07,	/* Internal error                          */
+	DID_RESET	= 0x08,	/* Reset by somebody.                      */
+	DID_BAD_INTR	= 0x09,	/* Got an interrupt we weren't expecting.  */
+	DID_PASSTHROUGH	= 0x0a,	/* Force command past mid-layer            */
+	DID_SOFT_ERROR	= 0x0b,	/* The low level driver just wish a retry  */
+	DID_IMM_RETRY	= 0x0c,	/* Retry without decrementing retry count  */
+	DID_REQUEUE	= 0x0d,	/* Requeue command (no immediate retry) also
+				 * without decrementing the retry count	   */
+	DID_TRANSPORT_DISRUPTED = 0x0e, /* Transport error disrupted execution
+					 * and the driver blocked the port to
+					 * recover the link. Transport class will
+					 * retry or fail IO */
+	DID_TRANSPORT_FAILFAST = 0x0f, /* Transport class fastfailed the io */
+	/*
+	 * We used to have DID_TARGET_FAILURE, DID_NEXUS_FAILURE,
+	 * DID_ALLOC_FAILURE and DID_MEDIUM_ERROR at 0x10 - 0x13. For compat
+	 * with userspace apps that parse the host byte for SG IO, we leave
+	 * that block of codes unused and start at 0x14 below.
+	 */
+	DID_TRANSPORT_MARGINAL = 0x14, /* Transport marginal errors */
+};
+
+#endif /* _SCSI_SCSI_STATUS_H */