iio: proximity: vl53l0x-i2c: claim direct mode for raw readsgrafted

vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.

The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.

Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.

Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

1 files changed, 66 insertions, 0 deletions

diff --git a/include/net/libeth/cache.h b/include/net/libeth/cache.h
new file mode 100644
index 000000000..bdb0c043c
--- /dev/null
+++ b/include/net/libeth/cache.h
@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (C) 2024 Intel Corporation */
+
+#ifndef __LIBETH_CACHE_H
+#define __LIBETH_CACHE_H
+
+#include <linux/cache.h>
+
+/**
+ * libeth_cacheline_group_assert - make sure cacheline group size is expected
+ * @type: type of the structure containing the group
+ * @grp: group name inside the struct
+ * @sz: expected group size
+ */
+#if defined(CONFIG_64BIT) && SMP_CACHE_BYTES == 64
+#define libeth_cacheline_group_assert(type, grp, sz)			      \
+	static_assert(offsetof(type, __cacheline_group_end__##grp) -	      \
+		      offsetofend(type, __cacheline_group_begin__##grp) ==    \
+		      (sz))
+#define __libeth_cacheline_struct_assert(type, sz)			      \
+	static_assert(sizeof(type) == (sz))
+#else /* !CONFIG_64BIT || SMP_CACHE_BYTES != 64 */
+#define libeth_cacheline_group_assert(type, grp, sz)			      \
+	static_assert(offsetof(type, __cacheline_group_end__##grp) -	      \
+		      offsetofend(type, __cacheline_group_begin__##grp) <=    \
+		      (sz))
+#define __libeth_cacheline_struct_assert(type, sz)			      \
+	static_assert(sizeof(type) <= (sz))
+#endif /* !CONFIG_64BIT || SMP_CACHE_BYTES != 64 */
+
+#define __libeth_cls1(sz1)	SMP_CACHE_ALIGN(sz1)
+#define __libeth_cls2(sz1, sz2)	(SMP_CACHE_ALIGN(sz1) + SMP_CACHE_ALIGN(sz2))
+#define __libeth_cls3(sz1, sz2, sz3)					      \
+	(SMP_CACHE_ALIGN(sz1) + SMP_CACHE_ALIGN(sz2) + SMP_CACHE_ALIGN(sz3))
+#define __libeth_cls(...)						      \
+	CONCATENATE(__libeth_cls, COUNT_ARGS(__VA_ARGS__))(__VA_ARGS__)
+
+/**
+ * libeth_cacheline_struct_assert - make sure CL-based struct size is expected
+ * @type: type of the struct
+ * @...: from 1 to 3 CL group sizes (read-mostly, read-write, cold)
+ *
+ * When a struct contains several CL groups, it's difficult to predict its size
+ * on different architectures. The macro instead takes sizes of all of the
+ * groups the structure contains and generates the final struct size.
+ */
+#define libeth_cacheline_struct_assert(type, ...)			      \
+	__libeth_cacheline_struct_assert(type, __libeth_cls(__VA_ARGS__));    \
+	static_assert(__alignof(type) >= SMP_CACHE_BYTES)
+
+/**
+ * libeth_cacheline_set_assert - make sure CL-based struct layout is expected
+ * @type: type of the struct
+ * @ro: expected size of the read-mostly group
+ * @rw: expected size of the read-write group
+ * @c: expected size of the cold group
+ *
+ * Check that each group size is expected and then do final struct size check.
+ */
+#define libeth_cacheline_set_assert(type, ro, rw, c)			      \
+	libeth_cacheline_group_assert(type, read_mostly, ro);		      \
+	libeth_cacheline_group_assert(type, read_write, rw);		      \
+	libeth_cacheline_group_assert(type, cold, c);			      \
+	libeth_cacheline_struct_assert(type, ro, rw, c)
+
+#endif /* __LIBETH_CACHE_H */