Merge tag 'io_uring-7.3-20261002' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linuxgrafted

Pull io_uring fixes from Jens Axboe:

 - Fix a task_work add use-after-free with SQPOLL.

   The sqpoll thread could pop and complete the last request while
   io_req_normal_work_add() was still looking at them after the mpscq
   push.

   Use the same approach as DEFER_TASKRUN to protect from that, holding
   an RCU read lock across the add, and have exit wait for an RCU grace
   period for SQPOLL rings as well.

 - CQE32 ring fixes: correct the free entry check for 32b CQEs, zero the
   big_cqe for aux CQEs, and only post the dummy skip CQE on CQE_MIXED
   rings

 - Mark the source filter table as COW when cloning bpf filters, so
   registering another filter on the source doesn't modify the shared
   table in place

 - Initialize the task context before running the BPF loop

 - Requeue zcrx multishot receives stopped by a local resource

 - End a TX_TIMESTAMP multishot cmd when the CQ is full (lollipopkit)

* tag 'io_uring-7.3-20261002' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
  io_uring: fix task_work add use-after-free with SQPOLL
  io_uring/cmd_net: end TX_TIMESTAMP multishot when the CQ is full
  io_uring/zcrx: requeue multishot receives stopped by a local resource
  io_uring: initialize task context before running the BPF loop
  io_uring: zero big_cqe for aux CQEs on CQE32 rings
  io_uring: fix free entry check for 32b CQEs on CQE32 rings
  io_uring: only post the dummy skip CQE on CQE_MIXED rings
  io_uring/bpf_filter: mark source as COW when cloning filters

17 files changed, 439 insertions, 0 deletions

diff --git a/include/dt-bindings/regulator/active-semi,8865-regulator.h b/include/dt-bindings/regulator/active-semi,8865-regulator.h
new file mode 100644
index 000000000..15473dbea
--- /dev/null
+++ b/include/dt-bindings/regulator/active-semi,8865-regulator.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Device Tree binding constants for the ACT8865 PMIC regulators
+ */
+
+#ifndef _DT_BINDINGS_REGULATOR_ACT8865_H
+#define _DT_BINDINGS_REGULATOR_ACT8865_H
+
+/*
+ * These constants should be used to specify regulator modes in device tree for
+ * ACT8865 regulators as follows:
+ * ACT8865_REGULATOR_MODE_FIXED:	It is specific to DCDC regulators and it
+ *					specifies the usage of fixed-frequency
+ *					PWM.
+ *
+ * ACT8865_REGULATOR_MODE_NORMAL:	It is specific to LDO regulators and it
+ *					specifies the usage of normal mode.
+ *
+ * ACT8865_REGULATOR_MODE_LOWPOWER:	For DCDC and LDO regulators; it specify
+ *					the usage of proprietary power-saving
+ *					mode.
+ */
+
+#define ACT8865_REGULATOR_MODE_FIXED		1
+#define ACT8865_REGULATOR_MODE_NORMAL		2
+#define ACT8865_REGULATOR_MODE_LOWPOWER	3
+
+#endif
diff --git a/include/dt-bindings/regulator/active-semi,8945a-regulator.h b/include/dt-bindings/regulator/active-semi,8945a-regulator.h
new file mode 100644
index 000000000..9bdba5e31
--- /dev/null
+++ b/include/dt-bindings/regulator/active-semi,8945a-regulator.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018 Microchip Technology, Inc. All rights reserved.
+ *
+ * Device Tree binding constants for the ACT8945A PMIC regulators
+ */
+
+#ifndef _DT_BINDINGS_REGULATOR_ACT8945A_H
+#define _DT_BINDINGS_REGULATOR_ACT8945A_H
+
+/*
+ * These constants should be used to specify regulator modes in device tree for
+ * ACT8945A regulators as follows:
+ * ACT8945A_REGULATOR_MODE_FIXED:	It is specific to DCDC regulators and it
+ *					specifies the usage of fixed-frequency
+ *					PWM.
+ *
+ * ACT8945A_REGULATOR_MODE_NORMAL:	It is specific to LDO regulators and it
+ *					specifies the usage of normal mode.
+ *
+ * ACT8945A_REGULATOR_MODE_LOWPOWER:	For DCDC and LDO regulators; it specify
+ *					the usage of proprietary power-saving
+ *					mode.
+ */
+
+#define ACT8945A_REGULATOR_MODE_FIXED		1
+#define ACT8945A_REGULATOR_MODE_NORMAL		2
+#define ACT8945A_REGULATOR_MODE_LOWPOWER	3
+
+#endif
diff --git a/include/dt-bindings/regulator/dlg,da9063-regulator.h b/include/dt-bindings/regulator/dlg,da9063-regulator.h
new file mode 100644
index 000000000..1de710dd0
--- /dev/null
+++ b/include/dt-bindings/regulator/dlg,da9063-regulator.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _DT_BINDINGS_REGULATOR_DLG_DA9063_H
+#define _DT_BINDINGS_REGULATOR_DLG_DA9063_H
+
+/*
+ * These buck mode constants may be used to specify values in device tree
+ * properties (e.g. regulator-initial-mode).
+ * A description of the following modes is in the manufacturers datasheet.
+ */
+
+#define DA9063_BUCK_MODE_SLEEP		1
+#define DA9063_BUCK_MODE_SYNC		2
+#define DA9063_BUCK_MODE_AUTO		3
+
+#endif
diff --git a/include/dt-bindings/regulator/dlg,da9121-regulator.h b/include/dt-bindings/regulator/dlg,da9121-regulator.h
new file mode 100644
index 000000000..954edf633
--- /dev/null
+++ b/include/dt-bindings/regulator/dlg,da9121-regulator.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef _DT_BINDINGS_REGULATOR_DLG_DA9121_H
+#define _DT_BINDINGS_REGULATOR_DLG_DA9121_H
+
+/*
+ * These buck mode constants may be used to specify values in device tree
+ * properties (e.g. regulator-initial-mode).
+ * A description of the following modes is in the manufacturers datasheet.
+ */
+
+#define DA9121_BUCK_MODE_FORCE_PFM		0
+#define DA9121_BUCK_MODE_FORCE_PWM		1
+#define DA9121_BUCK_MODE_FORCE_PWM_SHEDDING	2
+#define DA9121_BUCK_MODE_AUTO			3
+
+#define DA9121_BUCK_RIPPLE_CANCEL_NONE		0
+#define DA9121_BUCK_RIPPLE_CANCEL_SMALL		1
+#define DA9121_BUCK_RIPPLE_CANCEL_MID		2
+#define DA9121_BUCK_RIPPLE_CANCEL_LARGE		3
+
+#endif
diff --git a/include/dt-bindings/regulator/dlg,da9211-regulator.h b/include/dt-bindings/regulator/dlg,da9211-regulator.h
new file mode 100644
index 000000000..cdce2d54c
--- /dev/null
+++ b/include/dt-bindings/regulator/dlg,da9211-regulator.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _DT_BINDINGS_REGULATOR_DLG_DA9211_H
+#define _DT_BINDINGS_REGULATOR_DLG_DA9211_H
+
+/*
+ * These buck mode constants may be used to specify values in device tree
+ * properties (e.g. regulator-initial-mode, regulator-allowed-modes).
+ * A description of the following modes is in the manufacturers datasheet.
+ */
+
+#define DA9211_BUCK_MODE_SLEEP		1
+#define DA9211_BUCK_MODE_SYNC		2
+#define DA9211_BUCK_MODE_AUTO		3
+
+#endif
diff --git a/include/dt-bindings/regulator/fcs,fan53555-regulator.h b/include/dt-bindings/regulator/fcs,fan53555-regulator.h
new file mode 100644
index 000000000..ce3d6c63a
--- /dev/null
+++ b/include/dt-bindings/regulator/fcs,fan53555-regulator.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2026 Arturia - All rights reserved.
+ *
+ * Device Tree binding constants for the FAN53555 PMIC regulator
+ */
+
+#ifndef _DT_BINDINGS_REGULATOR_FAN53555_H
+#define _DT_BINDINGS_REGULATOR_FAN53555_H
+
+/*
+ * Constants to specify regulator modes in device tree for SYR82X regulators
+ * FAN53555_REGULATOR_MODE_FORCE_PWM:	Force fixed PWM mode
+ * FAN53555_REGULATOR_MODE_AUTO:	Allow auto-PFM mode during light load
+ */
+
+#define FAN53555_REGULATOR_MODE_FORCE_PWM	1
+#define FAN53555_REGULATOR_MODE_AUTO		2
+
+#endif
diff --git a/include/dt-bindings/regulator/maxim,max77802.h b/include/dt-bindings/regulator/maxim,max77802.h
new file mode 100644
index 000000000..d0baba197
--- /dev/null
+++ b/include/dt-bindings/regulator/maxim,max77802.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2014 Google, Inc
+ *
+ * Device Tree binding constants for the Maxim 77802 PMIC regulators
+ */
+
+#ifndef _DT_BINDINGS_REGULATOR_MAXIM_MAX77802_H
+#define _DT_BINDINGS_REGULATOR_MAXIM_MAX77802_H
+
+/* Regulator operating modes */
+#define MAX77802_OPMODE_LP	1
+#define MAX77802_OPMODE_NORMAL	3
+
+#endif /* _DT_BINDINGS_REGULATOR_MAXIM_MAX77802_H */
diff --git a/include/dt-bindings/regulator/mediatek,mt6360-regulator.h b/include/dt-bindings/regulator/mediatek,mt6360-regulator.h
new file mode 100644
index 000000000..21c75de70
--- /dev/null
+++ b/include/dt-bindings/regulator/mediatek,mt6360-regulator.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __DT_BINDINGS_MEDIATEK_MT6360_REGULATOR_H__
+#define __DT_BINDINGS_MEDIATEK_MT6360_REGULATOR_H__
+
+/*
+ * BUCK/LDO mode constants which may be used in devicetree properties
+ * (eg. regulator-allowed-modes).
+ * See the manufacturer's datasheet for more information on these modes.
+ */
+
+#define MT6360_OPMODE_LP		2
+#define MT6360_OPMODE_ULP		3
+#define MT6360_OPMODE_NORMAL		0
+
+#endif
diff --git a/include/dt-bindings/regulator/mediatek,mt6397-regulator.h b/include/dt-bindings/regulator/mediatek,mt6397-regulator.h
new file mode 100644
index 000000000..99869a866
--- /dev/null
+++ b/include/dt-bindings/regulator/mediatek,mt6397-regulator.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _DT_BINDINGS_REGULATOR_MEDIATEK_MT6397_H_
+#define _DT_BINDINGS_REGULATOR_MEDIATEK_MT6397_H_
+
+/*
+ * Buck mode constants which may be used in devicetree properties (eg.
+ * regulator-initial-mode, regulator-allowed-modes).
+ * See the manufacturer's datasheet for more information on these modes.
+ */
+
+#define MT6397_BUCK_MODE_AUTO		0
+#define MT6397_BUCK_MODE_FORCE_PWM	1
+
+#endif
diff --git a/include/dt-bindings/regulator/nxp,pca9450-regulator.h b/include/dt-bindings/regulator/nxp,pca9450-regulator.h
new file mode 100644
index 000000000..08434caef
--- /dev/null
+++ b/include/dt-bindings/regulator/nxp,pca9450-regulator.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Device Tree binding constants for the NXP PCA9450A/B/C PMIC regulators
+ */
+
+#ifndef _DT_BINDINGS_REGULATORS_NXP_PCA9450_H
+#define _DT_BINDINGS_REGULATORS_NXP_PCA9450_H
+
+/*
+ * Buck mode constants which may be used in devicetree properties (eg.
+ * regulator-initial-mode, regulator-allowed-modes).
+ * See the manufacturer's datasheet for more information on these modes.
+ */
+
+#define PCA9450_BUCK_MODE_AUTO		0
+#define PCA9450_BUCK_MODE_FORCE_PWM	1
+
+#endif
diff --git a/include/dt-bindings/regulator/qcom,rpmh-regulator.h b/include/dt-bindings/regulator/qcom,rpmh-regulator.h
new file mode 100644
index 000000000..86713dcf9
--- /dev/null
+++ b/include/dt-bindings/regulator/qcom,rpmh-regulator.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */
+
+#ifndef __QCOM_RPMH_REGULATOR_H
+#define __QCOM_RPMH_REGULATOR_H
+
+/*
+ * These mode constants may be used to specify modes for various RPMh regulator
+ * device tree properties (e.g. regulator-initial-mode).  Each type of regulator
+ * supports a subset of the possible modes.
+ *
+ * %RPMH_REGULATOR_MODE_RET:	Retention mode in which only an extremely small
+ *				load current is allowed.  This mode is supported
+ *				by LDO and SMPS type regulators.
+ * %RPMH_REGULATOR_MODE_LPM:	Low power mode in which a small load current is
+ *				allowed.  This mode corresponds to PFM for SMPS
+ *				and BOB type regulators.  This mode is supported
+ *				by LDO, HFSMPS, BOB, and PMIC4 FTSMPS type
+ *				regulators.
+ * %RPMH_REGULATOR_MODE_AUTO:	Auto mode in which the regulator hardware
+ *				automatically switches between LPM and HPM based
+ *				upon the real-time load current.  This mode is
+ *				supported by HFSMPS, BOB, and PMIC4 FTSMPS type
+ *				regulators.
+ * %RPMH_REGULATOR_MODE_HPM:	High power mode in which the full rated current
+ *				of the regulator is allowed.  This mode
+ *				corresponds to PWM for SMPS and BOB type
+ *				regulators.  This mode is supported by all types
+ *				of regulators.
+ */
+#define RPMH_REGULATOR_MODE_RET		0
+#define RPMH_REGULATOR_MODE_LPM		1
+#define RPMH_REGULATOR_MODE_AUTO	2
+#define RPMH_REGULATOR_MODE_HPM		3
+
+#endif
diff --git a/include/dt-bindings/regulator/richtek,rt5190a-regulator.h b/include/dt-bindings/regulator/richtek,rt5190a-regulator.h
new file mode 100644
index 000000000..63f99d4c1
--- /dev/null
+++ b/include/dt-bindings/regulator/richtek,rt5190a-regulator.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __DT_BINDINGS_RICHTEK_RT5190A_REGULATOR_H__
+#define __DT_BINDINGS_RICHTEK_RT5190A_REGULATOR_H__
+
+/*
+ * BUCK/LDO mode constants which may be used in devicetree properties
+ * (eg. regulator-allowed-modes).
+ * See the manufacturer's datasheet for more information on these modes.
+ */
+
+#define RT5190A_OPMODE_AUTO	0
+#define RT5190A_OPMODE_FPWM	1
+
+#endif
diff --git a/include/dt-bindings/regulator/samsung,s2mpg10-regulator.h b/include/dt-bindings/regulator/samsung,s2mpg10-regulator.h
new file mode 100644
index 000000000..d9c16bba4
--- /dev/null
+++ b/include/dt-bindings/regulator/samsung,s2mpg10-regulator.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright 2021 Google LLC
+ * Copyright 2025 Linaro Ltd.
+ *
+ * Device Tree binding constants for the Samsung S2MPG1x PMIC regulators
+ */
+
+#ifndef _DT_BINDINGS_REGULATOR_SAMSUNG_S2MPG10_H
+#define _DT_BINDINGS_REGULATOR_SAMSUNG_S2MPG10_H
+
+/*
+ * Several regulators may be controlled via external signals instead of via
+ * software. These constants describe the possible signals for such regulators
+ * and generally correspond to the respecitve on-chip pins.
+ *
+ * S2MPG10 regulators supporting these are:
+ * - buck1m .. buck7m buck10m
+ * - ldo3m .. ldo19m
+ *
+ * ldo20m supports external control, but using a different set of control
+ * signals.
+ *
+ * S2MPG11 regulators supporting these are:
+ * - buck1s .. buck3s buck5s buck8s buck9s bucka buckd
+ * - ldo1s ldo2s ldo8s ldo13s
+ */
+#define S2MPG10_EXTCTRL_PWREN       0 /* PWREN pin */
+#define S2MPG10_EXTCTRL_PWREN_MIF   1 /* PWREN_MIF pin */
+#define S2MPG10_EXTCTRL_AP_ACTIVE_N 2 /* ~AP_ACTIVE_N pin */
+#define S2MPG10_EXTCTRL_CPUCL1_EN   3 /* CPUCL1_EN pin */
+#define S2MPG10_EXTCTRL_CPUCL1_EN2  4 /* CPUCL1_EN & PWREN pins */
+#define S2MPG10_EXTCTRL_CPUCL2_EN   5 /* CPUCL2_EN pin */
+#define S2MPG10_EXTCTRL_CPUCL2_EN2  6 /* CPUCL2_E2 & PWREN pins */
+#define S2MPG10_EXTCTRL_TPU_EN      7 /* TPU_EN pin */
+#define S2MPG10_EXTCTRL_TPU_EN2     8 /* TPU_EN & ~AP_ACTIVE_N pins */
+#define S2MPG10_EXTCTRL_TCXO_ON     9 /* TCXO_ON pin */
+#define S2MPG10_EXTCTRL_TCXO_ON2    10 /* TCXO_ON & ~AP_ACTIVE_N pins */
+
+#define S2MPG10_EXTCTRL_LDO20M_EN2  11 /* VLDO20M_EN & LDO20M_SFR */
+#define S2MPG10_EXTCTRL_LDO20M_EN   12 /* VLDO20M_EN pin */
+
+#define S2MPG11_EXTCTRL_PWREN       0 /* PWREN pin */
+#define S2MPG11_EXTCTRL_PWREN_MIF   1 /* PWREN_MIF pin */
+#define S2MPG11_EXTCTRL_AP_ACTIVE_N 2 /* ~AP_ACTIVE_N pin */
+#define S2MPG11_EXTCTRL_G3D_EN      3 /* G3D_EN pin */
+#define S2MPG11_EXTCTRL_G3D_EN2     4 /* G3D_EN & ~AP_ACTIVE_N pins */
+#define S2MPG11_EXTCTRL_AOC_VDD     5 /* AOC_VDD pin */
+#define S2MPG11_EXTCTRL_AOC_RET     6 /* AOC_RET pin */
+#define S2MPG11_EXTCTRL_UFS_EN      7 /* UFS_EN pin */
+#define S2MPG11_EXTCTRL_LDO13S_EN   8 /* VLDO13S_EN pin */
+
+#endif /* _DT_BINDINGS_REGULATOR_SAMSUNG_S2MPG10_H */
diff --git a/include/dt-bindings/regulator/st,stm32mp13-regulator.h b/include/dt-bindings/regulator/st,stm32mp13-regulator.h
new file mode 100644
index 000000000..b3a974dfc
--- /dev/null
+++ b/include/dt-bindings/regulator/st,stm32mp13-regulator.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2022, STMicroelectronics - All Rights Reserved
+ */
+
+#ifndef __DT_BINDINGS_REGULATOR_ST_STM32MP13_REGULATOR_H
+#define __DT_BINDINGS_REGULATOR_ST_STM32MP13_REGULATOR_H
+
+/* SCMI voltage domains identifiers */
+
+/* SOC Internal regulators */
+#define VOLTD_SCMI_REG11		0
+#define VOLTD_SCMI_REG18		1
+#define VOLTD_SCMI_USB33		2
+#define VOLTD_SCMI_SDMMC1_IO		3
+#define VOLTD_SCMI_SDMMC2_IO		4
+#define VOLTD_SCMI_VREFBUF		5
+
+/* STPMIC1 regulators */
+#define VOLTD_SCMI_STPMIC1_BUCK1	6
+#define VOLTD_SCMI_STPMIC1_BUCK2	7
+#define VOLTD_SCMI_STPMIC1_BUCK3	8
+#define VOLTD_SCMI_STPMIC1_BUCK4	9
+#define VOLTD_SCMI_STPMIC1_LDO1	        10
+#define VOLTD_SCMI_STPMIC1_LDO2	        11
+#define VOLTD_SCMI_STPMIC1_LDO3	        12
+#define VOLTD_SCMI_STPMIC1_LDO4	        13
+#define VOLTD_SCMI_STPMIC1_LDO5	        14
+#define VOLTD_SCMI_STPMIC1_LDO6	        15
+#define VOLTD_SCMI_STPMIC1_VREFDDR	16
+#define VOLTD_SCMI_STPMIC1_BOOST	17
+#define VOLTD_SCMI_STPMIC1_PWR_SW1	18
+#define VOLTD_SCMI_STPMIC1_PWR_SW2	19
+
+/* External regulators */
+#define VOLTD_SCMI_REGU0		20
+#define VOLTD_SCMI_REGU1		21
+#define VOLTD_SCMI_REGU2		22
+#define VOLTD_SCMI_REGU3		23
+#define VOLTD_SCMI_REGU4		24
+
+#endif /*__DT_BINDINGS_REGULATOR_ST_STM32MP13_REGULATOR_H */
diff --git a/include/dt-bindings/regulator/st,stm32mp15-regulator.h b/include/dt-bindings/regulator/st,stm32mp15-regulator.h
new file mode 100644
index 000000000..7052507cb
--- /dev/null
+++ b/include/dt-bindings/regulator/st,stm32mp15-regulator.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2025, STMicroelectronics - All Rights Reserved
+ */
+
+#ifndef __DT_BINDINGS_REGULATOR_ST_STM32MP15_REGULATOR_H
+#define __DT_BINDINGS_REGULATOR_ST_STM32MP15_REGULATOR_H
+
+/* SCMI voltage domain identifiers */
+
+/* SOC Internal regulators */
+#define VOLTD_SCMI_REG11		0
+#define VOLTD_SCMI_REG18		1
+#define VOLTD_SCMI_USB33		2
+
+/* STPMIC1 regulators */
+#define VOLTD_SCMI_STPMIC1_BUCK1	3
+#define VOLTD_SCMI_STPMIC1_BUCK2	4
+#define VOLTD_SCMI_STPMIC1_BUCK3	5
+#define VOLTD_SCMI_STPMIC1_BUCK4	6
+#define VOLTD_SCMI_STPMIC1_LDO1		7
+#define VOLTD_SCMI_STPMIC1_LDO2		8
+#define VOLTD_SCMI_STPMIC1_LDO3		9
+#define VOLTD_SCMI_STPMIC1_LDO4		10
+#define VOLTD_SCMI_STPMIC1_LDO5		11
+#define VOLTD_SCMI_STPMIC1_LDO6		12
+#define VOLTD_SCMI_STPMIC1_VREFDDR	13
+#define VOLTD_SCMI_STPMIC1_BOOST	14
+#define VOLTD_SCMI_STPMIC1_PWR_SW1	15
+#define VOLTD_SCMI_STPMIC1_PWR_SW2	16
+#define VOLTD_SCMI_VREFBUF		17
+
+/* External regulators */
+#define VOLTD_SCMI_REGU0		18
+#define VOLTD_SCMI_REGU1		19
+#define VOLTD_SCMI_REGU2		20
+#define VOLTD_SCMI_REGU3		21
+#define VOLTD_SCMI_REGU4		22
+
+#endif /*__DT_BINDINGS_REGULATOR_ST_STM32MP15_REGULATOR_H */
diff --git a/include/dt-bindings/regulator/st,stm32mp25-regulator.h b/include/dt-bindings/regulator/st,stm32mp25-regulator.h
new file mode 100644
index 000000000..3c3d30911
--- /dev/null
+++ b/include/dt-bindings/regulator/st,stm32mp25-regulator.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2024, STMicroelectronics - All Rights Reserved
+ */
+
+#ifndef __DT_BINDINGS_REGULATOR_ST_STM32MP25_REGULATOR_H
+#define __DT_BINDINGS_REGULATOR_ST_STM32MP25_REGULATOR_H
+
+/* SCMI voltage domains identifiers */
+
+/* SOC Internal regulators */
+#define VOLTD_SCMI_VDDIO1		0
+#define VOLTD_SCMI_VDDIO2		1
+#define VOLTD_SCMI_VDDIO3		2
+#define VOLTD_SCMI_VDDIO4		3
+#define VOLTD_SCMI_VDDIO		4
+#define VOLTD_SCMI_UCPD			5
+#define VOLTD_SCMI_USB33		6
+#define VOLTD_SCMI_ADC			7
+#define VOLTD_SCMI_GPU			8
+#define VOLTD_SCMI_VREFBUF		9
+
+/* STPMIC2 regulators */
+#define VOLTD_SCMI_STPMIC2_BUCK1	10
+#define VOLTD_SCMI_STPMIC2_BUCK2	11
+#define VOLTD_SCMI_STPMIC2_BUCK3	12
+#define VOLTD_SCMI_STPMIC2_BUCK4	13
+#define VOLTD_SCMI_STPMIC2_BUCK5	14
+#define VOLTD_SCMI_STPMIC2_BUCK6	15
+#define VOLTD_SCMI_STPMIC2_BUCK7	16
+#define VOLTD_SCMI_STPMIC2_LDO1		17
+#define VOLTD_SCMI_STPMIC2_LDO2		18
+#define VOLTD_SCMI_STPMIC2_LDO3		19
+#define VOLTD_SCMI_STPMIC2_LDO4		20
+#define VOLTD_SCMI_STPMIC2_LDO5		21
+#define VOLTD_SCMI_STPMIC2_LDO6		22
+#define VOLTD_SCMI_STPMIC2_LDO7		23
+#define VOLTD_SCMI_STPMIC2_LDO8		24
+#define VOLTD_SCMI_STPMIC2_REFDDR	25
+
+/* External regulators */
+#define VOLTD_SCMI_REGU0		26
+#define VOLTD_SCMI_REGU1		27
+#define VOLTD_SCMI_REGU2		28
+#define VOLTD_SCMI_REGU3		29
+#define VOLTD_SCMI_REGU4		30
+
+#endif /*__DT_BINDINGS_REGULATOR_ST_STM32MP25_REGULATOR_H */
diff --git a/include/dt-bindings/regulator/ti,tps62864.h b/include/dt-bindings/regulator/ti,tps62864.h
new file mode 100644
index 000000000..8db31f23d
--- /dev/null
+++ b/include/dt-bindings/regulator/ti,tps62864.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+
+#ifndef _DT_BINDINGS_REGULATOR_TI_TPS62864_H
+#define _DT_BINDINGS_REGULATOR_TI_TPS62864_H
+
+#define TPS62864_MODE_NORMAL			0
+#define TPS62864_MODE_FPWM			1
+
+#endif