arm64/boot: Disable trapping of PMZR_EL0 writes to EL2grafted

__init_el2_fgt2() writes one mask to both HDFGRTR2_EL2 and HDFGWTR2_EL2.
PMZR_EL0 is write-only, so its trap bit, nPMZR_EL0, exists only in
HDFGWTR2_EL2 and is therefore never set: a PMZR_EL0 write from the host
traps to EL2, where the nVHE hypervisor has no handler and BUG()s. The
kernel never writes PMZR_EL0, but kernel.perf_user_access=1 has the PMU
driver set PMUSERENR_EL0.UEN for a task with a user-read event, so a
write from EL0 reaches the trap and takes the host down without a panic
message.

Accumulate the HDFGWTR2_EL2 bits separately, as __init_el2_fgt() already
does for HDFGWTR_EL2, and set nPMZR_EL0 with the other FEAT_PMUv3p9
bits.

Fixes: 858c7bfcb35e1 ("arm64/boot: Enable EL2 requirements for FEAT_PMUv3p9")
Cc: stable@vger.kernel.org
Signed-off-by: Fuad Tabba <fuad.tabba@linux.dev>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>

1 files changed, 125 insertions, 0 deletions

diff --git a/include/drm/drm_module.h b/include/drm/drm_module.h
new file mode 100644
index 000000000..4db1ae03d
--- /dev/null
+++ b/include/drm/drm_module.h
@@ -0,0 +1,125 @@
+/* SPDX-License-Identifier: MIT */
+
+#ifndef DRM_MODULE_H
+#define DRM_MODULE_H
+
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+#include <drm/drm_drv.h>
+
+/**
+ * DOC: overview
+ *
+ * This library provides helpers registering DRM drivers during module
+ * initialization and shutdown. The provided helpers act like bus-specific
+ * module helpers, such as module_pci_driver(), but respect additional
+ * parameters that control DRM driver registration.
+ *
+ * Below is an example of initializing a DRM driver for a device on the
+ * PCI bus.
+ *
+ * .. code-block:: c
+ *
+ *	struct pci_driver my_pci_drv = {
+ *	};
+ *
+ *	drm_module_pci_driver(my_pci_drv);
+ *
+ * The generated code will test if DRM drivers are enabled and register
+ * the PCI driver my_pci_drv. For more complex module initialization, you
+ * can still use module_init() and module_exit() in your driver.
+ */
+
+/*
+ * PCI drivers
+ */
+
+static inline int __init drm_pci_register_driver(struct pci_driver *pci_drv)
+{
+	if (drm_firmware_drivers_only())
+		return -ENODEV;
+
+	return pci_register_driver(pci_drv);
+}
+
+/**
+ * drm_module_pci_driver - Register a DRM driver for PCI-based devices
+ * @__pci_drv: the PCI driver structure
+ *
+ * Registers a DRM driver for devices on the PCI bus. The helper
+ * macro behaves like module_pci_driver() but tests the state of
+ * drm_firmware_drivers_only(). For more complex module initialization,
+ * use module_init() and module_exit() directly.
+ *
+ * Each module may only use this macro once. Calling it replaces
+ * module_init() and module_exit().
+ */
+#define drm_module_pci_driver(__pci_drv) \
+	module_driver(__pci_drv, drm_pci_register_driver, pci_unregister_driver)
+
+static inline int __init
+drm_pci_register_driver_if_modeset(struct pci_driver *pci_drv, int modeset)
+{
+	if (drm_firmware_drivers_only() && modeset == -1)
+		return -ENODEV;
+	if (modeset == 0)
+		return -ENODEV;
+
+	return pci_register_driver(pci_drv);
+}
+
+static inline void __exit
+drm_pci_unregister_driver_if_modeset(struct pci_driver *pci_drv, int modeset)
+{
+	pci_unregister_driver(pci_drv);
+}
+
+/**
+ * drm_module_pci_driver_if_modeset - Register a DRM driver for PCI-based devices
+ * @__pci_drv: the PCI driver structure
+ * @__modeset: an additional parameter that disables the driver
+ *
+ * This macro is deprecated and only provided for existing drivers. For
+ * new drivers, use drm_module_pci_driver().
+ *
+ * Registers a DRM driver for devices on the PCI bus. The helper macro
+ * behaves like drm_module_pci_driver() with an additional driver-specific
+ * flag. If __modeset is 0, the driver has been disabled, if __modeset is
+ * -1 the driver state depends on the global DRM state. For all other
+ * values, the PCI driver has been enabled. The default should be -1.
+ */
+#define drm_module_pci_driver_if_modeset(__pci_drv, __modeset) \
+	module_driver(__pci_drv, drm_pci_register_driver_if_modeset, \
+		      drm_pci_unregister_driver_if_modeset, __modeset)
+
+/*
+ * Platform drivers
+ */
+
+static inline int __init
+drm_platform_driver_register(struct platform_driver *platform_drv)
+{
+	if (drm_firmware_drivers_only())
+		return -ENODEV;
+
+	return platform_driver_register(platform_drv);
+}
+
+/**
+ * drm_module_platform_driver - Register a DRM driver for platform devices
+ * @__platform_drv: the platform driver structure
+ *
+ * Registers a DRM driver for devices on the platform bus. The helper
+ * macro behaves like module_platform_driver() but tests the state of
+ * drm_firmware_drivers_only(). For more complex module initialization,
+ * use module_init() and module_exit() directly.
+ *
+ * Each module may only use this macro once. Calling it replaces
+ * module_init() and module_exit().
+ */
+#define drm_module_platform_driver(__platform_drv) \
+	module_driver(__platform_drv, drm_platform_driver_register, \
+		      platform_driver_unregister)
+
+#endif