Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 209 insertions, 0 deletions

diff --git a/include/crypto/sha1.h b/include/crypto/sha1.h
new file mode 100644
index 000000000..4d973e016
--- /dev/null
+++ b/include/crypto/sha1.h
@@ -0,0 +1,209 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Common values for SHA-1 algorithms
+ */
+
+#ifndef _CRYPTO_SHA1_H
+#define _CRYPTO_SHA1_H
+
+#include <linux/types.h>
+
+#define SHA1_DIGEST_SIZE        20
+#define SHA1_BLOCK_SIZE         64
+#define SHA1_STATE_SIZE         offsetof(struct sha1_state, buffer)
+
+#define SHA1_H0		0x67452301UL
+#define SHA1_H1		0xefcdab89UL
+#define SHA1_H2		0x98badcfeUL
+#define SHA1_H3		0x10325476UL
+#define SHA1_H4		0xc3d2e1f0UL
+
+extern const u8 sha1_zero_message_hash[SHA1_DIGEST_SIZE];
+
+struct sha1_state {
+	u32 state[SHA1_DIGEST_SIZE / 4];
+	u64 count;
+	u8 buffer[SHA1_BLOCK_SIZE];
+};
+
+/* State for the SHA-1 compression function */
+struct sha1_block_state {
+	u32 h[SHA1_DIGEST_SIZE / 4];
+};
+
+/**
+ * struct sha1_ctx - Context for hashing a message with SHA-1
+ * @state: the compression function state
+ * @bytecount: number of bytes processed so far
+ * @buf: partial block buffer; bytecount % SHA1_BLOCK_SIZE bytes are valid
+ */
+struct sha1_ctx {
+	struct sha1_block_state state;
+	u64 bytecount;
+	u8 buf[SHA1_BLOCK_SIZE];
+};
+
+/**
+ * sha1_init() - Initialize a SHA-1 context for a new message
+ * @ctx: the context to initialize
+ *
+ * If you don't need incremental computation, consider sha1() instead.
+ *
+ * Context: Any context.
+ */
+void sha1_init(struct sha1_ctx *ctx);
+
+/**
+ * sha1_update() - Update a SHA-1 context with message data
+ * @ctx: the context to update; must have been initialized
+ * @data: the message data
+ * @len: the data length in bytes
+ *
+ * This can be called any number of times.
+ *
+ * Context: Any context.
+ */
+void sha1_update(struct sha1_ctx *ctx, const u8 *data, size_t len);
+
+/**
+ * sha1_final() - Finish computing a SHA-1 message digest
+ * @ctx: the context to finalize; must have been initialized
+ * @out: (output) the resulting SHA-1 message digest
+ *
+ * After finishing, this zeroizes @ctx.  So the caller does not need to do it.
+ *
+ * Context: Any context.
+ */
+void sha1_final(struct sha1_ctx *ctx, u8 out[at_least SHA1_DIGEST_SIZE]);
+
+/**
+ * sha1() - Compute SHA-1 message digest in one shot
+ * @data: the message data
+ * @len: the data length in bytes
+ * @out: (output) the resulting SHA-1 message digest
+ *
+ * Context: Any context.
+ */
+void sha1(const u8 *data, size_t len, u8 out[at_least SHA1_DIGEST_SIZE]);
+
+/**
+ * struct hmac_sha1_key - Prepared key for HMAC-SHA1
+ * @istate: private
+ * @ostate: private
+ */
+struct hmac_sha1_key {
+	struct sha1_block_state istate;
+	struct sha1_block_state ostate;
+};
+
+/**
+ * struct hmac_sha1_ctx - Context for computing HMAC-SHA1 of a message
+ * @sha_ctx: private
+ * @ostate: private
+ */
+struct hmac_sha1_ctx {
+	struct sha1_ctx sha_ctx;
+	struct sha1_block_state ostate;
+};
+
+/**
+ * hmac_sha1_preparekey() - Prepare a key for HMAC-SHA1
+ * @key: (output) the key structure to initialize
+ * @raw_key: the raw HMAC-SHA1 key
+ * @raw_key_len: the key length in bytes.  All key lengths are supported.
+ *
+ * Note: the caller is responsible for zeroizing both the struct hmac_sha1_key
+ * and the raw key once they are no longer needed.
+ *
+ * Context: Any context.
+ */
+void hmac_sha1_preparekey(struct hmac_sha1_key *key,
+			  const u8 *raw_key, size_t raw_key_len);
+
+/**
+ * hmac_sha1_init() - Initialize an HMAC-SHA1 context for a new message
+ * @ctx: (output) the HMAC context to initialize
+ * @key: the prepared HMAC key
+ *
+ * If you don't need incremental computation, consider hmac_sha1() instead.
+ *
+ * Context: Any context.
+ */
+void hmac_sha1_init(struct hmac_sha1_ctx *ctx, const struct hmac_sha1_key *key);
+
+/**
+ * hmac_sha1_init_usingrawkey() - Initialize an HMAC-SHA1 context for a new
+ *				  message, using a raw key
+ * @ctx: (output) the HMAC context to initialize
+ * @raw_key: the raw HMAC-SHA1 key
+ * @raw_key_len: the key length in bytes.  All key lengths are supported.
+ *
+ * If you don't need incremental computation, consider hmac_sha1_usingrawkey()
+ * instead.
+ *
+ * Context: Any context.
+ */
+void hmac_sha1_init_usingrawkey(struct hmac_sha1_ctx *ctx,
+				const u8 *raw_key, size_t raw_key_len);
+
+/**
+ * hmac_sha1_update() - Update an HMAC-SHA1 context with message data
+ * @ctx: the HMAC context to update; must have been initialized
+ * @data: the message data
+ * @data_len: the data length in bytes
+ *
+ * This can be called any number of times.
+ *
+ * Context: Any context.
+ */
+static inline void hmac_sha1_update(struct hmac_sha1_ctx *ctx,
+				    const u8 *data, size_t data_len)
+{
+	sha1_update(&ctx->sha_ctx, data, data_len);
+}
+
+/**
+ * hmac_sha1_final() - Finish computing an HMAC-SHA1 value
+ * @ctx: the HMAC context to finalize; must have been initialized
+ * @out: (output) the resulting HMAC-SHA1 value
+ *
+ * After finishing, this zeroizes @ctx.  So the caller does not need to do it.
+ *
+ * Context: Any context.
+ */
+void hmac_sha1_final(struct hmac_sha1_ctx *ctx,
+		     u8 out[at_least SHA1_DIGEST_SIZE]);
+
+/**
+ * hmac_sha1() - Compute HMAC-SHA1 in one shot, using a prepared key
+ * @key: the prepared HMAC key
+ * @data: the message data
+ * @data_len: the data length in bytes
+ * @out: (output) the resulting HMAC-SHA1 value
+ *
+ * If you're using the key only once, consider using hmac_sha1_usingrawkey().
+ *
+ * Context: Any context.
+ */
+void hmac_sha1(const struct hmac_sha1_key *key,
+	       const u8 *data, size_t data_len,
+	       u8 out[at_least SHA1_DIGEST_SIZE]);
+
+/**
+ * hmac_sha1_usingrawkey() - Compute HMAC-SHA1 in one shot, using a raw key
+ * @raw_key: the raw HMAC-SHA1 key
+ * @raw_key_len: the key length in bytes.  All key lengths are supported.
+ * @data: the message data
+ * @data_len: the data length in bytes
+ * @out: (output) the resulting HMAC-SHA1 value
+ *
+ * If you're using the key multiple times, prefer to use hmac_sha1_preparekey()
+ * followed by multiple calls to hmac_sha1() instead.
+ *
+ * Context: Any context.
+ */
+void hmac_sha1_usingrawkey(const u8 *raw_key, size_t raw_key_len,
+			   const u8 *data, size_t data_len,
+			   u8 out[at_least SHA1_DIGEST_SIZE]);
+
+#endif /* _CRYPTO_SHA1_H */