PCI: Add pci_irq_type() to query the allocated interrupt typegrafted

Add a helper that returns PCI_IRQ_MSIX, PCI_IRQ_MSI, or PCI_IRQ_INTX
based on the interrupt type the PCI core selected after
pci_alloc_irq_vectors().

Several drivers already open-code this check against pdev->msix_enabled
and pdev->msi_enabled, or even open code this helper [1].

A common helper avoids the duplication and keeps drivers from accessing
the bitfield directly (see also [2]).

Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Link: https://elixir.bootlin.com/linux/v7.1/source/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c#L196 [1]
Inspired-by: John Hubbard <jhubbard@nvidia.com>
Link: https://lore.kernel.org/all/DKKG2QM3YJYB.Z2H2B2UXJ75N@kernel.org/ [2]
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260813165234.620555-5-dakr@kernel.org
[ Add missing pci_irq_type() stub for CONFIG_PCI=n. ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>

1 files changed, 164 insertions, 0 deletions

diff --git a/include/asm-generic/syscall.h b/include/asm-generic/syscall.h
new file mode 100644
index 000000000..c5a3ad53b
--- /dev/null
+++ b/include/asm-generic/syscall.h
@@ -0,0 +1,164 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Access to user system call parameters and results
+ *
+ * Copyright (C) 2008-2009 Red Hat, Inc.  All rights reserved.
+ *
+ * This file is a stub providing documentation for what functions
+ * arch/ARCH/include/asm/syscall.h files need to define.  Most arch definitions
+ * will be simple inlines.
+ *
+ * All of these functions expect to be called with no locks,
+ * and only when the caller is sure that the task of interest
+ * cannot return to user mode while we are looking at it.
+ */
+
+#ifndef _ASM_SYSCALL_H
+#define _ASM_SYSCALL_H	1
+
+struct task_struct;
+struct pt_regs;
+
+/**
+ * syscall_get_nr - find what system call a task is executing
+ * @task:	task of interest, must be blocked
+ * @regs:	task_pt_regs() of @task
+ *
+ * If @task is executing a system call or is at system call
+ * tracing about to attempt one, returns the system call number.
+ * If @task is not executing a system call, i.e. it's blocked
+ * inside the kernel for a fault or signal, returns -1.
+ *
+ * Note this returns int even on 64-bit machines.  Only 32 bits of
+ * system call number can be meaningful.  If the actual arch value
+ * is 64 bits, this truncates to 32 bits so 0xffffffff means -1.
+ *
+ * It's only valid to call this when @task is known to be blocked.
+ */
+int syscall_get_nr(struct task_struct *task, struct pt_regs *regs);
+
+/**
+ * syscall_set_nr - change the system call a task is executing
+ * @task:	task of interest, must be blocked
+ * @regs:	task_pt_regs() of @task
+ * @nr:		system call number
+ *
+ * Changes the system call number @task is about to execute.
+ *
+ * It's only valid to call this when @task is stopped for tracing on
+ * entry to a system call, due to %SYSCALL_WORK_SYSCALL_TRACE or
+ * %SYSCALL_WORK_SYSCALL_AUDIT.
+ */
+void syscall_set_nr(struct task_struct *task, struct pt_regs *regs, int nr);
+
+/**
+ * syscall_rollback - roll back registers after an aborted system call
+ * @task:	task of interest, must be in system call exit tracing
+ * @regs:	task_pt_regs() of @task
+ *
+ * It's only valid to call this when @task is stopped for system
+ * call exit tracing (due to %SYSCALL_WORK_SYSCALL_TRACE or
+ * %SYSCALL_WORK_SYSCALL_AUDIT), after ptrace_report_syscall_entry()
+ * returned nonzero to prevent the system call from taking place.
+ *
+ * This rolls back the register state in @regs so it's as if the
+ * system call instruction was a no-op.  The registers containing
+ * the system call number and arguments are as they were before the
+ * system call instruction.  This may not be the same as what the
+ * register state looked like at system call entry tracing.
+ */
+void syscall_rollback(struct task_struct *task, struct pt_regs *regs);
+
+/**
+ * syscall_get_error - check result of traced system call
+ * @task:	task of interest, must be blocked
+ * @regs:	task_pt_regs() of @task
+ *
+ * Returns 0 if the system call succeeded, or -ERRORCODE if it failed.
+ *
+ * It's only valid to call this when @task is stopped for tracing on exit
+ * from a system call, due to %SYSCALL_WORK_SYSCALL_TRACE or
+ * %SYSCALL_WORK_SYSCALL_AUDIT.
+ */
+long syscall_get_error(struct task_struct *task, struct pt_regs *regs);
+
+/**
+ * syscall_get_return_value - get the return value of a traced system call
+ * @task:	task of interest, must be blocked
+ * @regs:	task_pt_regs() of @task
+ *
+ * Returns the return value of the successful system call.
+ * This value is meaningless if syscall_get_error() returned nonzero.
+ *
+ * It's only valid to call this when @task is stopped for tracing on exit
+ * from a system call, due to %SYSCALL_WORK_SYSCALL_TRACE or
+ * %SYSCALL_WORK_SYSCALL_AUDIT.
+ */
+long syscall_get_return_value(struct task_struct *task, struct pt_regs *regs);
+
+/**
+ * syscall_set_return_value - change the return value of a traced system call
+ * @task:	task of interest, must be blocked
+ * @regs:	task_pt_regs() of @task
+ * @error:	negative error code, or zero to indicate success
+ * @val:	user return value if @error is zero
+ *
+ * This changes the results of the system call that user mode will see.
+ * If @error is zero, the user sees a successful system call with a
+ * return value of @val.  If @error is nonzero, it's a negated errno
+ * code; the user sees a failed system call with this errno code.
+ *
+ * It's only valid to call this when @task is stopped for tracing on exit
+ * from a system call, due to %SYSCALL_WORK_SYSCALL_TRACE or
+ * %SYSCALL_WORK_SYSCALL_AUDIT.
+ */
+void syscall_set_return_value(struct task_struct *task, struct pt_regs *regs,
+			      int error, long val);
+
+/**
+ * syscall_get_arguments - extract system call parameter values
+ * @task:	task of interest, must be blocked
+ * @regs:	task_pt_regs() of @task
+ * @args:	array filled with argument values
+ *
+ * Fetches 6 arguments to the system call.  First argument is stored in
+*  @args[0], and so on.
+ *
+ * It's only valid to call this when @task is stopped for tracing on
+ * entry to a system call, due to %SYSCALL_WORK_SYSCALL_TRACE or
+ * %SYSCALL_WORK_SYSCALL_AUDIT.
+ */
+void syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
+			   unsigned long *args);
+
+/**
+ * syscall_set_arguments - change system call parameter value
+ * @task:	task of interest, must be in system call entry tracing
+ * @regs:	task_pt_regs() of @task
+ * @args:	array of argument values to store
+ *
+ * Changes 6 arguments to the system call.
+ * The first argument gets value @args[0], and so on.
+ *
+ * It's only valid to call this when @task is stopped for tracing on
+ * entry to a system call, due to %SYSCALL_WORK_SYSCALL_TRACE or
+ * %SYSCALL_WORK_SYSCALL_AUDIT.
+ */
+void syscall_set_arguments(struct task_struct *task, struct pt_regs *regs,
+			   const unsigned long *args);
+
+/**
+ * syscall_get_arch - return the AUDIT_ARCH for the current system call
+ * @task:	task of interest, must be blocked
+ *
+ * Returns the AUDIT_ARCH_* based on the system call convention in use.
+ *
+ * It's only valid to call this when @task is stopped on entry to a system
+ * call, due to %SYSCALL_WORK_SYSCALL_TRACE, %SYSCALL_WORK_SYSCALL_AUDIT, or
+ * %SYSCALL_WORK_SECCOMP.
+ *
+ * Architectures which permit CONFIG_HAVE_ARCH_SECCOMP_FILTER must
+ * provide an implementation of this.
+ */
+int syscall_get_arch(struct task_struct *task);
+#endif	/* _ASM_SYSCALL_H */