virtio_blk: set the zone write granularitygrafted

virtblk_read_zoned_limits() reads the write granularity that the device
reports in virtio_blk_zoned_characteristics and assigns it to the
physical block size and to io_min, but never to the limit that is named
after it. queue_limits.zone_write_granularity is left at zero, so
blk_validate_zoned_limits() raises it to the logical block size:

	if (lim->zone_write_granularity < lim->logical_block_size)
		lim->zone_write_granularity = lim->logical_block_size;

A device that reports a granularity coarser than its logical block size,
which is what the field exists to express, therefore has it silently
reduced. A 512e host managed disk passed through to a guest reports a
logical block size of 512 and a write granularity of 4096, and the guest
ends up with a zone write granularity of 512.

bio_split_alignment() returns lim->zone_write_granularity if it is non-zero
and bio_split_io_at() may split a bio with as per bio_split_alignment().
This can real to the write getting rejected by the host drive, as the write
is not aligned to the physical block size.

zonefs also takes its block size from bdev_zone_write_granularity(), so it
would incorrectly use 512 on a disk that requires 4096.

sd_zbc_read_zones() sets the limit from the physical block size for the
same reason. NVMe ZNS and null_blk leave it unset, but the fallback
gives the right answer for them, as their write granularity is the
logical block size. virtio carries a separate value that may exceed it.

Set the zone write granularity from the value that the device reports.

Fixes: 95bfec41bd3d ("virtio-blk: add support for zoned block devices")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://patch.msgid.link/20260918140641.2031075-2-cassel@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

1 files changed, 46 insertions, 0 deletions

diff --git a/include/asm-generic/fprobe.h b/include/asm-generic/fprobe.h
new file mode 100644
index 000000000..8659a4dc6
--- /dev/null
+++ b/include/asm-generic/fprobe.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Generic arch dependent fprobe macros.
+ */
+#ifndef __ASM_GENERIC_FPROBE_H__
+#define __ASM_GENERIC_FPROBE_H__
+
+#include <linux/bits.h>
+
+#ifdef CONFIG_64BIT
+/*
+ * Encoding the size and the address of fprobe into one 64bit entry.
+ * The 32bit architectures should use 2 entries to store those info.
+ */
+
+#define ARCH_DEFINE_ENCODE_FPROBE_HEADER
+
+#define FPROBE_HEADER_MSB_SIZE_SHIFT (BITS_PER_LONG - FPROBE_DATA_SIZE_BITS)
+#define FPROBE_HEADER_MSB_MASK					\
+	GENMASK(FPROBE_HEADER_MSB_SIZE_SHIFT - 1, 0)
+
+/*
+ * By default, this expects the MSBs in the address of kprobe is 0xf.
+ * If any arch needs another fixed pattern (e.g. s390 is zero filled),
+ * override this.
+ */
+#define FPROBE_HEADER_MSB_PATTERN				\
+	GENMASK(BITS_PER_LONG - 1, FPROBE_HEADER_MSB_SIZE_SHIFT)
+
+#define arch_fprobe_header_encodable(fp)			\
+	(((unsigned long)(fp) & ~FPROBE_HEADER_MSB_MASK) ==	\
+	 FPROBE_HEADER_MSB_PATTERN)
+
+#define arch_encode_fprobe_header(fp, size)			\
+	(((unsigned long)(fp) & FPROBE_HEADER_MSB_MASK) |	\
+	 ((unsigned long)(size) << FPROBE_HEADER_MSB_SIZE_SHIFT))
+
+#define arch_decode_fprobe_header_size(val)			\
+	((unsigned long)(val) >> FPROBE_HEADER_MSB_SIZE_SHIFT)
+
+#define arch_decode_fprobe_header_fp(val)					\
+	((struct fprobe *)(((unsigned long)(val) & FPROBE_HEADER_MSB_MASK) |	\
+			   FPROBE_HEADER_MSB_PATTERN))
+#endif /* CONFIG_64BIT */
+
+#endif /* __ASM_GENERIC_FPROBE_H__ */