iio: proximity: vl53l0x-i2c: claim direct mode for raw readsgrafted

vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.

The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.

Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.

Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

1 files changed, 82 insertions, 0 deletions

diff --git a/include/asm-generic/bitops/lock.h b/include/asm-generic/bitops/lock.h
new file mode 100644
index 000000000..ffb73b612
--- /dev/null
+++ b/include/asm-generic/bitops/lock.h
@@ -0,0 +1,82 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_GENERIC_BITOPS_LOCK_H_
+#define _ASM_GENERIC_BITOPS_LOCK_H_
+
+#include <linux/atomic.h>
+#include <linux/compiler.h>
+#include <asm/barrier.h>
+
+/**
+ * arch_test_and_set_bit_lock - Set a bit and return its old value, for lock
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and provides acquire barrier semantics if
+ * the returned value is 0.
+ * It can be used to implement bit locks.
+ */
+static __always_inline int
+arch_test_and_set_bit_lock(unsigned int nr, volatile unsigned long *addr)
+{
+	long old;
+	unsigned long mask = BIT_MASK(nr);
+
+	addr += BIT_WORD(nr);
+	if (READ_ONCE(*addr) & mask)
+		return 1;
+
+	old = raw_atomic_long_fetch_or_acquire(mask, (atomic_long_t *)addr);
+	return !!(old & mask);
+}
+
+
+/**
+ * arch_clear_bit_unlock - Clear a bit in memory, for unlock
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This operation is atomic and provides release barrier semantics.
+ */
+static __always_inline void
+arch_clear_bit_unlock(unsigned int nr, volatile unsigned long *addr)
+{
+	addr += BIT_WORD(nr);
+	raw_atomic_long_fetch_andnot_release(BIT_MASK(nr), (atomic_long_t *)addr);
+}
+
+/**
+ * arch___clear_bit_unlock - Clear a bit in memory, for unlock
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * A weaker form of clear_bit_unlock() as used by __bit_lock_unlock(). If all
+ * the bits in the word are protected by this lock some archs can use weaker
+ * ops to safely unlock.
+ *
+ * See for example x86's implementation.
+ */
+static inline void
+arch___clear_bit_unlock(unsigned int nr, volatile unsigned long *addr)
+{
+	unsigned long old;
+
+	addr += BIT_WORD(nr);
+	old = READ_ONCE(*addr);
+	old &= ~BIT_MASK(nr);
+	raw_atomic_long_set_release((atomic_long_t *)addr, old);
+}
+
+#ifndef arch_xor_unlock_is_negative_byte
+static inline bool arch_xor_unlock_is_negative_byte(unsigned long mask,
+		volatile unsigned long *p)
+{
+	long old;
+
+	old = raw_atomic_long_fetch_xor_release(mask, (atomic_long_t *)p);
+	return !!(old & BIT(7));
+}
+#endif
+
+#include <asm-generic/bitops/instrumented-lock.h>
+
+#endif /* _ASM_GENERIC_BITOPS_LOCK_H_ */