Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 112 insertions, 0 deletions

diff --git a/fs/nfsd/lockd.c b/fs/nfsd/lockd.c
new file mode 100644
index 000000000..72a5b4998
--- /dev/null
+++ b/fs/nfsd/lockd.c
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This file contains all the stubs needed when communicating with lockd.
+ * This level of indirection is necessary so we can run nfsd+lockd without
+ * requiring the nfs client to be compiled in/loaded, and vice versa.
+ *
+ * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
+ */
+
+#include <linux/file.h>
+#include <linux/lockd/bind.h>
+#include "nfsd.h"
+#include "vfs.h"
+
+#define NFSDDBG_FACILITY		NFSDDBG_LOCKD
+
+/**
+ * nlm_fopen - Open an NFSD file
+ * @rqstp: NLM RPC procedure execution context
+ * @f: NFS file handle to be opened
+ * @filp: OUT: an opened struct file
+ * @flags: the POSIX open flags to use
+ *
+ * nlm_fopen() holds the dentry reference until nlm_fclose() releases it.
+ *
+ * Returns zero on success or a negative errno value if the file
+ * cannot be opened.
+ */
+static int nlm_fopen(struct svc_rqst *rqstp, struct nfs_fh *f,
+		     struct file **filp, int flags)
+{
+	__be32		nfserr;
+	int		access;
+	struct svc_fh	fh;
+
+	/* must initialize before using! but maxsize doesn't matter */
+	fh_init(&fh,0);
+	fh.fh_handle.fh_size = f->size;
+	memcpy(&fh.fh_handle.fh_raw, f->data, f->size);
+	fh.fh_export = NULL;
+
+	/*
+	 * Allow BYPASS_GSS as some client implementations use AUTH_SYS
+	 * for NLM even when GSS is used for NFS.
+	 * Allow OWNER_OVERRIDE as permission might have been changed
+	 * after the file was opened.
+	 * Pass MAY_NLM so that authentication can be completely bypassed
+	 * if NFSEXP_NOAUTHNLM is set.  Some older clients use AUTH_NULL
+	 * for NLM requests.
+	 */
+	access = (flags == O_WRONLY) ? NFSD_MAY_WRITE : NFSD_MAY_READ;
+	access |= NFSD_MAY_NLM | NFSD_MAY_OWNER_OVERRIDE | NFSD_MAY_BYPASS_GSS;
+	nfserr = nfsd_open(rqstp, &fh, S_IFREG, access, filp);
+	fh_put(&fh);
+
+	switch (nfserr) {
+	case nfs_ok:
+		break;
+	case nfserr_jukebox:
+		/*
+		 * This error can indicate a presence of a conflicting
+		 * delegation to an NLM lock request. Options are:
+		 * (1) For now, drop this request and make the client
+		 * retry. When delegation is returned, client's lock retry
+		 * will complete.
+		 * (2) NLM4_DENIED as per "spec" signals to the client
+		 * that the lock is unavailable now but client can retry.
+		 * Linux client implementation does not. It treats
+		 * NLM4_DENIED same as NLM4_FAILED and fails the request.
+		 * (3) For the future, treat this as blocked lock and try
+		 * to callback when the delegation is returned but might
+		 * not have a proper lock request to block on.
+		 */
+		return -EWOULDBLOCK;
+	case nfserr_stale:
+		return -ESTALE;
+	default:
+		return -ENOLCK;
+	}
+
+	return 0;
+}
+
+/**
+ * nlm_fclose - Close an NFSD file
+ * @filp: a struct file that was opened by nlm_fopen()
+ */
+static void
+nlm_fclose(struct file *filp)
+{
+	fput(filp);
+}
+
+static const struct nlmsvc_binding nfsd_nlm_ops = {
+	.owner		= THIS_MODULE,
+	.fopen		= nlm_fopen,		/* open file for locking */
+	.fclose		= nlm_fclose,		/* close file */
+};
+
+void
+nfsd_lockd_init(void)
+{
+	dprintk("nfsd: initializing lockd\n");
+	rcu_assign_pointer(nlmsvc_ops, &nfsd_nlm_ops);
+}
+
+void
+nfsd_lockd_shutdown(void)
+{
+	RCU_INIT_POINTER(nlmsvc_ops, NULL);
+	synchronize_rcu();
+}