Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 152 insertions, 0 deletions

diff --git a/fs/f2fs/Kconfig b/fs/f2fs/Kconfig
new file mode 100644
index 000000000..5916a02fb
--- /dev/null
+++ b/fs/f2fs/Kconfig
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config F2FS_FS
+	tristate "F2FS filesystem support"
+	depends on BLOCK
+	select BUFFER_HEAD
+	select NLS
+	select CRC32
+	select F2FS_FS_XATTR if FS_ENCRYPTION
+	select FS_ENCRYPTION_ALGS if FS_ENCRYPTION
+	select FS_IOMAP
+	select LZ4_COMPRESS if F2FS_FS_LZ4
+	select LZ4_DECOMPRESS if F2FS_FS_LZ4
+	select LZ4HC_COMPRESS if F2FS_FS_LZ4HC
+	select LZO_COMPRESS if F2FS_FS_LZO
+	select LZO_DECOMPRESS if F2FS_FS_LZO
+	select ZSTD_COMPRESS if F2FS_FS_ZSTD
+	select ZSTD_DECOMPRESS if F2FS_FS_ZSTD
+	help
+	  F2FS is based on Log-structured File System (LFS), which supports
+	  versatile "flash-friendly" features. The design has been focused on
+	  addressing the fundamental issues in LFS, which are snowball effect
+	  of wandering tree and high cleaning overhead.
+
+	  Since flash-based storages show different characteristics according to
+	  the internal geometry or flash memory management schemes aka FTL, F2FS
+	  and tools support various parameters not only for configuring on-disk
+	  layout, but also for selecting allocation and cleaning algorithms.
+
+	  If unsure, say N.
+
+config F2FS_STAT_FS
+	bool "F2FS Status Information"
+	depends on F2FS_FS
+	default y
+	help
+	  /sys/kernel/debug/f2fs/ contains information about all the partitions
+	  mounted as f2fs. Each file shows the whole f2fs information.
+
+	  /sys/kernel/debug/f2fs/status includes:
+	    - major filesystem information managed by f2fs currently
+	    - average SIT information about whole segments
+	    - current memory footprint consumed by f2fs.
+
+config F2FS_FS_XATTR
+	bool "F2FS extended attributes"
+	depends on F2FS_FS
+	default y
+	help
+	  Extended attributes are name:value pairs associated with inodes by
+	  the kernel or by users (see the attr(5) manual page for details).
+
+	  If unsure, say N.
+
+config F2FS_FS_POSIX_ACL
+	bool "F2FS Access Control Lists"
+	depends on F2FS_FS_XATTR
+	select FS_POSIX_ACL
+	default y
+	help
+	  Posix Access Control Lists (ACLs) support permissions for users and
+	  groups beyond the owner/group/world scheme.
+
+	  If you don't know what Access Control Lists are, say N
+
+config F2FS_FS_SECURITY
+	bool "F2FS Security Labels"
+	depends on F2FS_FS_XATTR
+	help
+	  Security labels provide an access control facility to support Linux
+	  Security Models (LSMs) accepted by AppArmor, SELinux, Smack and TOMOYO
+	  Linux. This option enables an extended attribute handler for file
+	  security labels in the f2fs filesystem, so that it requires enabling
+	  the extended attribute support in advance. In particular you need this
+	  option if you use the setcap command to assign initial process capabi-
+	  lities to executables (the security.* extended attributes).
+
+	  If you are not using a security module, say N.
+
+config F2FS_CHECK_FS
+	bool "F2FS consistency checking feature"
+	depends on F2FS_FS
+	help
+	  Enables BUG_ONs which check the filesystem consistency in runtime.
+
+	  If you want to improve the performance, say N.
+
+config F2FS_FAULT_INJECTION
+	bool "F2FS fault injection facility"
+	depends on F2FS_FS
+	help
+	  Test F2FS to inject faults such as ENOMEM, ENOSPC, and so on.
+
+	  If unsure, say N.
+
+config F2FS_FS_COMPRESSION
+	bool "F2FS compression feature"
+	depends on F2FS_FS
+	help
+	  Enable filesystem-level compression on f2fs regular files,
+	  multiple back-end compression algorithms are supported.
+
+config F2FS_FS_LZO
+	bool "LZO compression support"
+	depends on F2FS_FS_COMPRESSION
+	default y
+	help
+	  Support LZO compress algorithm, if unsure, say Y.
+
+config F2FS_FS_LZORLE
+	bool "LZO-RLE compression support"
+	depends on F2FS_FS_LZO
+	default y
+	help
+	  Support LZO-RLE compress algorithm, if unsure, say Y.
+
+config F2FS_FS_LZ4
+	bool "LZ4 compression support"
+	depends on F2FS_FS_COMPRESSION
+	default y
+	help
+	  Support LZ4 compress algorithm, if unsure, say Y.
+
+config F2FS_FS_LZ4HC
+	bool "LZ4HC compression support"
+	depends on F2FS_FS_LZ4
+	default y
+	help
+	  Support LZ4HC compress algorithm, LZ4HC has compatible on-disk
+	  layout with LZ4, if unsure, say Y.
+
+config F2FS_FS_ZSTD
+	bool "ZSTD compression support"
+	depends on F2FS_FS_COMPRESSION
+	default y
+	help
+	  Support ZSTD compress algorithm, if unsure, say Y.
+
+config F2FS_IOSTAT
+	bool "F2FS IO statistics information"
+	depends on F2FS_FS
+	default y
+	help
+	  Support getting IO statistics through sysfs and printing out periodic
+	  IO statistics tracepoint events. You have to turn on "iostat_enable"
+	  sysfs node to enable this feature.
+
+config F2FS_UNFAIR_RWSEM
+	bool "F2FS unfair rw_semaphore"
+	depends on F2FS_FS && BLK_CGROUP
+	help
+	  Use unfair rw_semaphore, if system configured IO priority by block
+	  cgroup.