Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 92 insertions, 0 deletions

diff --git a/fs/ext4/Kconfig b/fs/ext4/Kconfig
new file mode 100644
index 000000000..01873c2a3
--- /dev/null
+++ b/fs/ext4/Kconfig
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config EXT4_FS
+	tristate "The Extended 4 (ext4) filesystem"
+	select BUFFER_HEAD
+	select JBD2
+	select CRC16
+	select CRC32
+	select FS_IOMAP
+	select FS_ENCRYPTION_ALGS if FS_ENCRYPTION
+	help
+	  This is the next generation of the ext3 filesystem.
+
+	  Unlike the change from ext2 filesystem to ext3 filesystem,
+	  the on-disk format of ext4 is not forwards compatible with
+	  ext3; it is based on extent maps and it supports 48-bit
+	  physical block numbers.  The ext4 filesystem also supports delayed
+	  allocation, persistent preallocation, high resolution time stamps,
+	  and a number of other features to improve performance and speed
+	  up fsck time.  For more information, please see the web pages at
+	  http://ext4.wiki.kernel.org.
+
+	  The ext4 filesystem supports mounting an ext3 filesystem; while there
+	  are some performance gains from the delayed allocation and inode
+	  table readahead, the best performance gains require enabling ext4
+	  features in the filesystem using tune2fs, or formatting a new
+	  filesystem as an ext4 filesystem initially. Without explicit enabling
+	  of ext4 features, the on disk filesystem format stays fully backward
+	  compatible.
+
+	  To compile this file system support as a module, choose M here. The
+	  module will be called ext4.
+
+	  If unsure, say N.
+
+config EXT4_USE_FOR_EXT2
+	bool "Use ext4 for ext2 file systems"
+	depends on EXT4_FS
+	depends on EXT2_FS=n
+	default y
+	help
+	  Allow the ext4 file system driver code to be used for ext2
+	  file system mounts.  This allows users to reduce their
+	  compiled kernel size by using one file system driver for
+	  ext2, ext3, and ext4 file systems.
+
+config EXT4_FS_POSIX_ACL
+	bool "Ext4 POSIX Access Control Lists"
+	depends on EXT4_FS
+	select FS_POSIX_ACL
+	help
+	  POSIX Access Control Lists (ACLs) support permissions for users and
+	  groups beyond the owner/group/world scheme.
+
+	  If you don't know what Access Control Lists are, say N
+
+config EXT4_FS_SECURITY
+	bool "Ext4 Security Labels"
+	depends on EXT4_FS
+	help
+	  Security labels support alternative access control models
+	  implemented by security modules like SELinux.  This option
+	  enables an extended attribute handler for file security
+	  labels in the ext4 filesystem.
+
+	  If you are not using a security module that requires using
+	  extended attributes for file security labels, say N.
+
+config EXT4_DEBUG
+	bool "Ext4 debugging support"
+	depends on EXT4_FS
+	help
+	  Enables run-time debugging support for the ext4 filesystem.
+
+	  If you select Y here, then you will be able to turn on debugging
+	  using dynamic debug control for mb_debug() / ext_debug() msgs.
+
+config EXT4_KUNIT_TESTS
+	tristate "KUnit tests for ext4" if !KUNIT_ALL_TESTS
+	depends on EXT4_FS && KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  This builds the ext4 KUnit tests.
+
+	  KUnit tests run during boot and output the results to the debug log
+	  in TAP format (https://testanything.org/). Only useful for kernel devs
+	  running KUnit test harness and are not for inclusion into a production
+	  build.
+
+	  For more information on KUnit and unit tests in general please refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+	  If unsure, say N.