staging: rtl8723bs: fix OOB read in rtw_action_frame_parse()grafted

rtw_action_frame_parse() takes a frame_len parameter but never
actually checks it before indexing into the frame body:

	const u8 *frame_body = frame + sizeof(struct ieee80211_hdr_3addr);
	...
	c = frame_body[0];
	...
	a = frame_body[1];

frame_body already points 24 bytes (sizeof(struct
ieee80211_hdr_3addr)) into frame, so reading frame_body[0] and
frame_body[1] requires frame_len >= 26. A management action frame
shorter than that (e.g. exactly 24 bytes, the minimum a malicious
peer can send) causes a 1-2 byte out-of-bounds read.

This is reachable from rtw_cfg80211_monitor_if_xmit_entry() and
cfg80211_rtw_mgmt_tx() in ioctl_cfg80211.c, both of which pass
attacker/user-influenced frame buffers and lengths straight through.

Add the missing length check before frame_body is dereferenced.

Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260728125456.32359-3-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 101 insertions, 0 deletions

diff --git a/drivers/video/fbdev/sa1100fb.h b/drivers/video/fbdev/sa1100fb.h
new file mode 100644
index 000000000..b4363444f
--- /dev/null
+++ b/drivers/video/fbdev/sa1100fb.h
@@ -0,0 +1,101 @@
+/*
+ * linux/drivers/video/sa1100fb.h
+ *    -- StrongARM 1100 LCD Controller Frame Buffer Device
+ *
+ *  Copyright (C) 1999 Eric A. Thomas
+ *   Based on acornfb.c Copyright (C) Russell King.
+ *  
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+struct gpio_desc;
+
+#define LCCR0           0x0000          /* LCD Control Reg. 0 */
+#define LCSR            0x0004          /* LCD Status Reg. */
+#define DBAR1           0x0010          /* LCD DMA Base Address Reg. channel 1 */
+#define DCAR1           0x0014          /* LCD DMA Current Address Reg. channel 1 */
+#define DBAR2           0x0018          /* LCD DMA Base Address Reg.  channel 2 */
+#define DCAR2           0x001C          /* LCD DMA Current Address Reg. channel 2 */
+#define LCCR1           0x0020          /* LCD Control Reg. 1 */
+#define LCCR2           0x0024          /* LCD Control Reg. 2 */
+#define LCCR3           0x0028          /* LCD Control Reg. 3 */
+
+/* Shadows for LCD controller registers */
+struct sa1100fb_lcd_reg {
+	unsigned long lccr0;
+	unsigned long lccr1;
+	unsigned long lccr2;
+	unsigned long lccr3;
+};
+
+struct sa1100fb_info {
+	struct fb_info		fb;
+	struct device		*dev;
+	const struct sa1100fb_rgb *rgb[NR_RGB];
+	void __iomem		*base;
+	struct gpio_desc	*shannon_lcden;
+
+	/*
+	 * These are the addresses we mapped
+	 * the framebuffer memory region to.
+	 */
+	dma_addr_t		map_dma;
+	u_char *		map_cpu;
+	u_int			map_size;
+
+	u_char *		screen_cpu;
+	dma_addr_t		screen_dma;
+	u16 *			palette_cpu;
+	dma_addr_t		palette_dma;
+	u_int			palette_size;
+
+	dma_addr_t		dbar1;
+	dma_addr_t		dbar2;
+
+	u_int			reg_lccr0;
+	u_int			reg_lccr1;
+	u_int			reg_lccr2;
+	u_int			reg_lccr3;
+
+	volatile u_char		state;
+	volatile u_char		task_state;
+	struct mutex		ctrlr_lock;
+	wait_queue_head_t	ctrlr_wait;
+	struct work_struct	task;
+
+#ifdef CONFIG_CPU_FREQ
+	struct notifier_block	freq_transition;
+#endif
+
+	const struct sa1100fb_mach_info *inf;
+	struct clk *clk;
+
+	u32 pseudo_palette[16];
+};
+
+#define TO_INF(ptr,member)	container_of(ptr,struct sa1100fb_info,member)
+
+#define SA1100_PALETTE_MODE_VAL(bpp)    (((bpp) & 0x018) << 9)
+
+/*
+ * These are the actions for set_ctrlr_state
+ */
+#define C_DISABLE		(0)
+#define C_ENABLE		(1)
+#define C_DISABLE_CLKCHANGE	(2)
+#define C_ENABLE_CLKCHANGE	(3)
+#define C_REENABLE		(4)
+#define C_DISABLE_PM		(5)
+#define C_ENABLE_PM		(6)
+#define C_STARTUP		(7)
+
+#define SA1100_NAME	"SA1100"
+
+/*
+ * Minimum X and Y resolutions
+ */
+#define MIN_XRES	64
+#define MIN_YRES	64
+