Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 251 insertions, 0 deletions

diff --git a/drivers/video/fbdev/hecubafb.c b/drivers/video/fbdev/hecubafb.c
new file mode 100644
index 000000000..dd2af980f
--- /dev/null
+++ b/drivers/video/fbdev/hecubafb.c
@@ -0,0 +1,251 @@
+/*
+ * linux/drivers/video/hecubafb.c -- FB driver for Hecuba/Apollo controller
+ *
+ * Copyright (C) 2006, Jaya Kumar
+ * This work was sponsored by CIS(M) Sdn Bhd
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
+ * This work was possible because of apollo display code from E-Ink's website
+ * http://support.eink.com/community
+ * All information used to write this code is from public material made
+ * available by E-Ink on its support site. Some commands such as 0xA4
+ * were found by looping through cmd=0x00 thru 0xFF and supplying random
+ * values. There are other commands that the display is capable of,
+ * beyond the 5 used here but they are more complex.
+ *
+ * This driver is written to be used with the Hecuba display architecture.
+ * The actual display chip is called Apollo and the interface electronics
+ * it needs is called Hecuba.
+ *
+ * It is intended to be architecture independent. A board specific driver
+ * must be used to perform all the physical IO interactions. An example
+ * is provided as n411.c
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/list.h>
+#include <linux/uaccess.h>
+
+#include <video/hecubafb.h>
+
+/* Display specific information */
+#define DPY_W 600
+#define DPY_H 800
+
+static const struct fb_fix_screeninfo hecubafb_fix = {
+	.id =		"hecubafb",
+	.type =		FB_TYPE_PACKED_PIXELS,
+	.visual =	FB_VISUAL_MONO01,
+	.xpanstep =	0,
+	.ypanstep =	0,
+	.ywrapstep =	0,
+	.line_length =	DPY_W,
+	.accel =	FB_ACCEL_NONE,
+};
+
+static const struct fb_var_screeninfo hecubafb_var = {
+	.xres		= DPY_W,
+	.yres		= DPY_H,
+	.xres_virtual	= DPY_W,
+	.yres_virtual	= DPY_H,
+	.bits_per_pixel	= 1,
+	.nonstd		= 1,
+};
+
+/* main hecubafb functions */
+
+static void apollo_send_data(struct hecubafb_par *par, unsigned char data)
+{
+	/* set data */
+	par->board->set_data(par, data);
+
+	/* set DS low */
+	par->board->set_ctl(par, HCB_DS_BIT, 0);
+
+	/* wait for ack */
+	par->board->wait_for_ack(par, 0);
+
+	/* set DS hi */
+	par->board->set_ctl(par, HCB_DS_BIT, 1);
+
+	/* wait for ack to clear */
+	par->board->wait_for_ack(par, 1);
+}
+
+static void apollo_send_command(struct hecubafb_par *par, unsigned char data)
+{
+	/* command so set CD to high */
+	par->board->set_ctl(par, HCB_CD_BIT, 1);
+
+	/* actually strobe with command */
+	apollo_send_data(par, data);
+
+	/* clear CD back to low */
+	par->board->set_ctl(par, HCB_CD_BIT, 0);
+}
+
+static void hecubafb_dpy_update(struct hecubafb_par *par)
+{
+	int i;
+	unsigned char *buf = par->info->screen_buffer;
+
+	apollo_send_command(par, APOLLO_START_NEW_IMG);
+
+	for (i=0; i < (DPY_W*DPY_H/8); i++) {
+		apollo_send_data(par, *(buf++));
+	}
+
+	apollo_send_command(par, APOLLO_STOP_IMG_DATA);
+	apollo_send_command(par, APOLLO_DISPLAY_IMG);
+}
+
+/* this is called back from the deferred io workqueue */
+static void hecubafb_dpy_deferred_io(struct fb_info *info, struct list_head *pagereflist)
+{
+	hecubafb_dpy_update(info->par);
+}
+
+static void hecubafb_defio_damage_range(struct fb_info *info, off_t off, size_t len)
+{
+	struct hecubafb_par *par = info->par;
+
+	hecubafb_dpy_update(par);
+}
+
+static void hecubafb_defio_damage_area(struct fb_info *info, u32 x, u32 y,
+				       u32 width, u32 height)
+{
+	struct hecubafb_par *par = info->par;
+
+	hecubafb_dpy_update(par);
+}
+
+FB_GEN_DEFAULT_DEFERRED_SYSMEM_OPS(hecubafb,
+				   hecubafb_defio_damage_range,
+				   hecubafb_defio_damage_area)
+
+static const struct fb_ops hecubafb_ops = {
+	.owner	= THIS_MODULE,
+	FB_DEFAULT_DEFERRED_OPS(hecubafb),
+};
+
+static struct fb_deferred_io hecubafb_defio = {
+	.delay		= HZ,
+	.deferred_io	= hecubafb_dpy_deferred_io,
+};
+
+static int hecubafb_probe(struct platform_device *dev)
+{
+	struct fb_info *info;
+	struct hecuba_board *board;
+	int retval = -ENOMEM;
+	int videomemorysize;
+	unsigned char *videomemory;
+	struct hecubafb_par *par;
+
+	/* pick up board specific routines */
+	board = dev->dev.platform_data;
+	if (!board)
+		return -EINVAL;
+
+	/* try to count device specific driver, if can't, platform recalls */
+	if (!try_module_get(board->owner))
+		return -ENODEV;
+
+	videomemorysize = (DPY_W*DPY_H)/8;
+
+	videomemory = vzalloc(videomemorysize);
+	if (!videomemory)
+		goto err_videomem_alloc;
+
+	info = framebuffer_alloc(sizeof(struct hecubafb_par), &dev->dev);
+	if (!info)
+		goto err_fballoc;
+
+	info->screen_buffer = videomemory;
+	info->fbops = &hecubafb_ops;
+
+	info->var = hecubafb_var;
+	info->fix = hecubafb_fix;
+	info->fix.smem_len = videomemorysize;
+	par = info->par;
+	par->info = info;
+	par->board = board;
+	par->send_command = apollo_send_command;
+	par->send_data = apollo_send_data;
+
+	info->flags = FBINFO_VIRTFB;
+
+	info->fbdefio = &hecubafb_defio;
+	retval = fb_deferred_io_init(info);
+	if (retval)
+		goto err_fbdefio;
+
+	retval = register_framebuffer(info);
+	if (retval < 0)
+		goto err_fbreg;
+	platform_set_drvdata(dev, info);
+
+	fb_info(info, "Hecuba frame buffer device, using %dK of video memory\n",
+		videomemorysize >> 10);
+
+	/* this inits the dpy */
+	retval = par->board->init(par);
+	if (retval < 0)
+		goto err_fbreg;
+
+	return 0;
+err_fbreg:
+	fb_deferred_io_cleanup(info);
+err_fbdefio:
+	framebuffer_release(info);
+err_fballoc:
+	vfree(videomemory);
+err_videomem_alloc:
+	module_put(board->owner);
+	return retval;
+}
+
+static void hecubafb_remove(struct platform_device *dev)
+{
+	struct fb_info *info = platform_get_drvdata(dev);
+
+	if (info) {
+		struct hecubafb_par *par = info->par;
+		fb_deferred_io_cleanup(info);
+		unregister_framebuffer(info);
+		vfree(info->screen_buffer);
+		if (par->board->remove)
+			par->board->remove(par);
+		module_put(par->board->owner);
+		framebuffer_release(info);
+	}
+}
+
+static struct platform_driver hecubafb_driver = {
+	.probe	= hecubafb_probe,
+	.remove	= hecubafb_remove,
+	.driver	= {
+		.name	= "hecubafb",
+	},
+};
+module_platform_driver(hecubafb_driver);
+
+MODULE_DESCRIPTION("fbdev driver for Hecuba/Apollo controller");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");