Merge tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-tracegrafted

Pull tracing fixes from Steven Rostedt:

 - Don't destroy user event fields when removal fails

   User event fields are destroyed before the event is removed from
   visibility. But that can fail leaving the still visible event with no
   fields. Move the destroying of the fields to after the event is
   successfully removed from visibility.

 - Initialize function graph state is fork before calling
   copy_exec_state()

   For non-CLONE_VM forks, copy_exec_state() allocates a new
   task_exec_state. If that allocation fails, ftrace_graph_exit_task()
   will free the tasks ret_stack pointer. Since that pointer is still
   using the parent's ret_stack, it mistakenly frees the parent's
   pointer too.

   Call ftrace_graph_init() on the task first which will NULL out the
   new tasks's ret_stack and if the copy fails, it will not free
   anything.

 - Remove FGRAPH_MAX_INDEX

   The macro FGRAPH_MAX_INDEX was added but never used. Remove it.

 - Save ent_size in function graph printing of nested functions

   The function graph tracer needs to look at the next event to see if
   the next event is the return of the current function entry. If it is,
   it prints a single line:

	ktime_get();

   Otherwise it prints it like a nested function:

	tick_nohz_irq_exit() {
	    ktime_get();
	    kcpustat_irq_exit();
	}

   In order to look at the next event, it must save the current event so
   that it has the information to print from it. It saves the event in
   the iterator descriptor called "ent". What it doesn't save is the
   ent_size of the event which is now used to know if the function graph
   arguments are to be printed. The peek doesn't save the size so the
   size used happens to be that of the size of the last event that was
   seen.

   Save the entry event size in the iterator descriptor so that the
   correct size is used.

 - Fix several errors with freeing data in the histogram code

   The histogram code had a lot of leaked or or incorrect accounting
   when failures happen. Correct them.

 - Fix histogram regression of .percent and .graph modifiers

   Up until 6.3 histogram values could have "percent" or "graph"
   modifiers that changed how they were printed. But a change that added
   restricting histograms values from being strings, stack traces and
   other modifiers inadvertently prevented them from using the percent
   and graph modifiers, which were legal use cases for values.

   Put back the percent and graph modifiers.

 - Fix various typos in the comments

 - Set the trace_clock before initializing a histogram with clock
   argument

   The histogram API allows the user to specific which trace clock to
   use via a "clock=" string. The histogram is set up first before the
   clock is checked. If the passed in clock is not valid, it exits
   without fully fixing up the histogram leaving it on the list and a
   use-after-free can trigger.

   Update the clock argument first and if it fails then exit gracefully
   before the histogram trigger is placed on any lists.

 - Restore :mod: trailer after parsing in ftrace_set_clr_event

   The function ftrace_set_clr_event() modifies the parse string and
   needs to put it back to what was passed in. It searches for ":mod:"
   via a strsep() but fails to put back the first ':' in the string.

   Add back the ':' in the passed in string.

 - Take trace_array reference when opening a tracer options file

   The options files are dynamically created and some tracers add their
   own options. When a tracer adds their own list of options, the
   trace_array holding them has an array to hold the list of options for
   each tracer. This array increases in size via a krealloc(), and the
   new entry gets a newly allocated array to hold the options of the new
   tracer being added.

   The element in each entry of the tracer's option array holds a
   pointer back to the trace_array, a pointer to the tracer it is
   associated to, a pointer to the flags of the option.

   The issue is that these arrays are freed when the trace_array is
   freed when its instance it represents is removed from the instances
   directory. There's a race that an open of one of these options files
   can happen when the instance is being removed.

   Add a new helper function to be called by the open function of the
   options file to iterate all existing trace_arrays under a lock and
   find the one that has the given option element in one of it's tracer
   arrays. If found, then update the associated trace_array's reference
   counter to keep it from being freed. If not found, have the open call
   return -ENODEV.

 - Disable interrupts when acquiring the lock in rb_wake_up_waiters()

   The function rb_wake_up_waiters() assumes it will be called in
   interrupt context and does not disable irqs when taking
   cpu_buffer->reader_lock, which can be called in hard interrupt
   context. The issue is in PREEMPT_RT, this function is called in
   thread context leaving this lock open to a deadlock.

   Take the lock with interrupts disabled.

 - Use rcu_assign_pointer() for tmp_ops filter hash

   The tmp_ops used in update_ftrace_direct_mod() assigns its
   filter_hash field directly, but that field is annotated as __rcu and
   sparse complains. Assign it with rcu_assign_pointer()

 - Fix use-after-free in enable_trigger_private_data_free()

   The trace_event_call is accessed through the event_trigger_data's
   trace_event_file pointer to put the trace_event_call on freeing. The
   issue is that the trace_event_file data may have been freed already
   causing a use-after-free. Add a field to the event_trigger_data that
   points directly to the trace_event_call so that it can decrement its
   reference directly without needing to go through the
   trace_event_file.

 - Fix accounting of buffer data remote headers

   trace_buffer_desc_size() and trace_remote_alloc_buffer() undercount
   the number of pages is needed for the asked for size as it doesn't
   take into account the meta data on each page. Add a helper function
   to do the calculation properly and use that in these functions.

 - Catch nr_page_va overflow in ring_buffer_desc sizing

   The number of pages per remote ring buffer is capped by
   ring_buffer_desc::nr_page_va (32 bits). A buffer_size large enough to
   overflow that field would silently allocate a descriptor smaller than
   what was asked for.

 - Do not resize the subbuf order if any per_cpu buffer is disabled

   The mmapping of ring buffers disables resizing the subbuffers, but it
   is done per-cpu whereas the subbuf size change is done for all the
   per_cpu buffers under the buffer->mutex. It could change the size of
   some while the mapping is happening on others. Have the resize of the
   subbuf order check all the per_cpu buffers under the lock to see if
   any of them is disabled before starting and causing an inconsistency
   between buffers that are being mapped.

* tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (25 commits)
  ring-buffer: Check resize_disabled before publishing the new subbuf order
  tracing/remotes: Catch nr_page_va overflow in ring_buffer_desc sizing
  tracing/remotes: Account for ring buffer page header in size calculation
  tracing: Don't dereference trace_event_file in deferred trigger free
  ftrace: Use rcu_assign_pointer() for tmp_ops filter hash
  ring-buffer: Acquire the lock with irqsave in rb_wake_up_waiters()
  tracing: Take trace_array reference when opening a tracer options file
  tracing: Fix ring_buffer_read_page_size() kernel-doc
  tracing: Restore :mod: trailer after parsing in ftrace_set_clr_event()
  tracing: Fix memory corruption from a "STACKTRACE" histogram key
  tracing: Fix memory corruption from the histogram stacktrace modifier
  tracing: Undo the registration when enabling the histogram trigger fails
  tracing: Take the reference before publishing the named histogram trigger
  tracing: Set the trace clock before registering the histogram trigger
  tracing: Fix typo "preceeded" in comment
  tracing: Fix typo "availabe" in comment
  tracing: Let histogram values keep the percent and graph modifiers
  tracing: Keep the entry count when the histogram stats allocation fails
  tracing: Free histogram the field rejected for a bad modifier
  tracing: Free histogram the var ref when its initialization fails
  ...

1 files changed, 307 insertions, 0 deletions

diff --git a/drivers/video/fbdev/dnfb.c b/drivers/video/fbdev/dnfb.c
new file mode 100644
index 000000000..c4d24540d
--- /dev/null
+++ b/drivers/video/fbdev/dnfb.c
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/amigahw.h>
+#include <asm/amigaints.h>
+#include <asm/apollohw.h>
+#include <linux/fb.h>
+#include <linux/module.h>
+
+/* apollo video HW definitions */
+
+/*
+ * Control Registers.   IOBASE + $x
+ *
+ * Note: these are the Memory/IO BASE definitions for a mono card set to the
+ * alternate address
+ *
+ * Control 3A and 3B serve identical functions except that 3A
+ * deals with control 1 and 3b deals with Color LUT reg.
+ */
+
+#define AP_IOBASE       0x3b0	/* Base address of 1 plane board. */
+#define AP_STATUS       isaIO2mem(AP_IOBASE+0)	/* Status register.  Read */
+#define AP_WRITE_ENABLE isaIO2mem(AP_IOBASE+0)	/* Write Enable Register Write */
+#define AP_DEVICE_ID    isaIO2mem(AP_IOBASE+1)	/* Device ID Register. Read */
+#define AP_ROP_1        isaIO2mem(AP_IOBASE+2)	/* Raster Operation reg. Write Word */
+#define AP_DIAG_MEM_REQ isaIO2mem(AP_IOBASE+4)	/* Diagnostic Memory Request. Write Word */
+#define AP_CONTROL_0    isaIO2mem(AP_IOBASE+8)	/* Control Register 0.  Read/Write */
+#define AP_CONTROL_1    isaIO2mem(AP_IOBASE+0xa)	/* Control Register 1.  Read/Write */
+#define AP_CONTROL_3A   isaIO2mem(AP_IOBASE+0xe)	/* Control Register 3a. Read/Write */
+#define AP_CONTROL_2    isaIO2mem(AP_IOBASE+0xc)	/* Control Register 2. Read/Write */
+
+
+#define FRAME_BUFFER_START 0x0FA0000
+#define FRAME_BUFFER_LEN 0x40000
+
+/* CREG 0 */
+#define VECTOR_MODE 0x40	/* 010x.xxxx */
+#define DBLT_MODE   0x80	/* 100x.xxxx */
+#define NORMAL_MODE 0xE0	/* 111x.xxxx */
+#define SHIFT_BITS  0x1F	/* xxx1.1111 */
+	/* other bits are Shift value */
+
+/* CREG 1 */
+#define AD_BLT      0x80	/* 1xxx.xxxx */
+#define NORMAL      0x80 /* 1xxx.xxxx */	/* What is happening here ?? */
+#define INVERSE     0x00 /* 0xxx.xxxx */	/* Clearing this reverses the screen */
+#define PIX_BLT     0x00	/* 0xxx.xxxx */
+
+#define AD_HIBIT        0x40	/* xIxx.xxxx */
+
+#define ROP_EN          0x10	/* xxx1.xxxx */
+#define DST_EQ_SRC      0x00	/* xxx0.xxxx */
+#define nRESET_SYNC     0x08	/* xxxx.1xxx */
+#define SYNC_ENAB       0x02	/* xxxx.xx1x */
+
+#define BLANK_DISP      0x00	/* xxxx.xxx0 */
+#define ENAB_DISP       0x01	/* xxxx.xxx1 */
+
+#define NORM_CREG1      (nRESET_SYNC | SYNC_ENAB | ENAB_DISP)	/* no reset sync */
+
+/* CREG 2 */
+
+/*
+ * Following 3 defines are common to 1, 4 and 8 plane.
+ */
+
+#define S_DATA_1s   0x00 /* 00xx.xxxx */	/* set source to all 1's -- vector drawing */
+#define S_DATA_PIX  0x40 /* 01xx.xxxx */	/* takes source from ls-bits and replicates over 16 bits */
+#define S_DATA_PLN  0xC0 /* 11xx.xxxx */	/* normal, each data access =16-bits in
+						   one plane of image mem */
+
+/* CREG 3A/CREG 3B */
+#       define RESET_CREG 0x80	/* 1000.0000 */
+
+/* ROP REG  -  all one nibble */
+/*      ********* NOTE : this is used r0,r1,r2,r3 *********** */
+#define ROP(r2,r3,r0,r1) ( (U_SHORT)((r0)|((r1)<<4)|((r2)<<8)|((r3)<<12)) )
+#define DEST_ZERO               0x0
+#define SRC_AND_DEST    0x1
+#define SRC_AND_nDEST   0x2
+#define SRC                             0x3
+#define nSRC_AND_DEST   0x4
+#define DEST                    0x5
+#define SRC_XOR_DEST    0x6
+#define SRC_OR_DEST             0x7
+#define SRC_NOR_DEST    0x8
+#define SRC_XNOR_DEST   0x9
+#define nDEST                   0xA
+#define SRC_OR_nDEST    0xB
+#define nSRC                    0xC
+#define nSRC_OR_DEST    0xD
+#define SRC_NAND_DEST   0xE
+#define DEST_ONE                0xF
+
+#define SWAP(A) ((A>>8) | ((A&0xff) <<8))
+
+/* frame buffer operations */
+
+static int dnfb_blank(int blank, struct fb_info *info);
+static void dnfb_copyarea(struct fb_info *info, const struct fb_copyarea *area);
+
+static const struct fb_ops dn_fb_ops = {
+	.owner		= THIS_MODULE,
+	__FB_DEFAULT_IOMEM_OPS_RDWR,
+	.fb_blank	= dnfb_blank,
+	.fb_fillrect	= cfb_fillrect,
+	.fb_copyarea	= dnfb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+	__FB_DEFAULT_IOMEM_OPS_MMAP,
+};
+
+static const struct fb_var_screeninfo dnfb_var = {
+	.xres		= 1280,
+	.yres		= 1024,
+	.xres_virtual	= 2048,
+	.yres_virtual	= 1024,
+	.bits_per_pixel	= 1,
+	.height		= -1,
+	.width		= -1,
+	.vmode		= FB_VMODE_NONINTERLACED,
+};
+
+static const struct fb_fix_screeninfo dnfb_fix = {
+	.id		= "Apollo Mono",
+	.smem_start	= (FRAME_BUFFER_START + IO_BASE),
+	.smem_len	= FRAME_BUFFER_LEN,
+	.type		= FB_TYPE_PACKED_PIXELS,
+	.visual		= FB_VISUAL_MONO10,
+	.line_length	= 256,
+};
+
+static int dnfb_blank(int blank, struct fb_info *info)
+{
+	if (blank)
+		out_8(AP_CONTROL_3A, 0x0);
+	else
+		out_8(AP_CONTROL_3A, 0x1);
+	return 0;
+}
+
+static
+void dnfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
+{
+
+	int incr, y_delta, pre_read = 0, x_end, x_word_count;
+	uint start_mask, end_mask, dest;
+	ushort *src, dummy;
+	short i, j;
+
+	incr = (area->dy <= area->sy) ? 1 : -1;
+
+	src = (ushort *)(info->screen_base + area->sy * info->fix.line_length +
+			(area->sx >> 4));
+	dest = area->dy * (info->fix.line_length >> 1) + (area->dx >> 4);
+
+	if (incr > 0) {
+		y_delta = (info->fix.line_length * 8) - area->sx - area->width;
+		x_end = area->dx + area->width - 1;
+		x_word_count = (x_end >> 4) - (area->dx >> 4) + 1;
+		start_mask = 0xffff0000 >> (area->dx & 0xf);
+		end_mask = 0x7ffff >> (x_end & 0xf);
+		out_8(AP_CONTROL_0,
+		     (((area->dx & 0xf) - (area->sx & 0xf)) % 16) | (0x4 << 5));
+		if ((area->dx & 0xf) < (area->sx & 0xf))
+			pre_read = 1;
+	} else {
+		y_delta = -((info->fix.line_length * 8) - area->sx - area->width);
+		x_end = area->dx - area->width + 1;
+		x_word_count = (area->dx >> 4) - (x_end >> 4) + 1;
+		start_mask = 0x7ffff >> (area->dx & 0xf);
+		end_mask = 0xffff0000 >> (x_end & 0xf);
+		out_8(AP_CONTROL_0,
+		     ((-((area->sx & 0xf) - (area->dx & 0xf))) % 16) |
+		     (0x4 << 5));
+		if ((area->dx & 0xf) > (area->sx & 0xf))
+			pre_read = 1;
+	}
+
+	for (i = 0; i < area->height; i++) {
+
+		out_8(AP_CONTROL_3A, 0xc | (dest >> 16));
+
+		if (pre_read) {
+			dummy = *src;
+			src += incr;
+		}
+
+		if (x_word_count) {
+			out_8(AP_WRITE_ENABLE, start_mask);
+			*src = dest;
+			src += incr;
+			dest += incr;
+			out_8(AP_WRITE_ENABLE, 0);
+
+			for (j = 1; j < (x_word_count - 1); j++) {
+				*src = dest;
+				src += incr;
+				dest += incr;
+			}
+
+			out_8(AP_WRITE_ENABLE, start_mask);
+			*src = dest;
+			dest += incr;
+			src += incr;
+		} else {
+			out_8(AP_WRITE_ENABLE, start_mask | end_mask);
+			*src = dest;
+			dest += incr;
+			src += incr;
+		}
+		src += (y_delta / 16);
+		dest += (y_delta / 16);
+	}
+	out_8(AP_CONTROL_0, NORMAL_MODE);
+}
+
+/*
+ * Initialization
+ */
+
+static int dnfb_probe(struct platform_device *dev)
+{
+	struct fb_info *info;
+	int err = 0;
+
+	info = framebuffer_alloc(0, &dev->dev);
+	if (!info)
+		return -ENOMEM;
+
+	info->fbops = &dn_fb_ops;
+	info->fix = dnfb_fix;
+	info->var = dnfb_var;
+	info->var.red.length = 1;
+	info->var.red.offset = 0;
+	info->var.green = info->var.blue = info->var.red;
+	info->screen_base = (u_char *) info->fix.smem_start;
+
+	err = fb_alloc_cmap(&info->cmap, 2, 0);
+	if (err < 0)
+		goto release_framebuffer;
+
+	err = register_framebuffer(info);
+	if (err < 0) {
+		fb_dealloc_cmap(&info->cmap);
+		goto release_framebuffer;
+	}
+	platform_set_drvdata(dev, info);
+
+	/* now we have registered we can safely setup the hardware */
+	out_8(AP_CONTROL_3A, RESET_CREG);
+	out_be16(AP_WRITE_ENABLE, 0x0);
+	out_8(AP_CONTROL_0, NORMAL_MODE);
+	out_8(AP_CONTROL_1, (AD_BLT | DST_EQ_SRC | NORM_CREG1));
+	out_8(AP_CONTROL_2, S_DATA_PLN);
+	out_be16(AP_ROP_1, SWAP(0x3));
+
+	printk("apollo frame buffer alive and kicking !\n");
+	return err;
+
+release_framebuffer:
+	framebuffer_release(info);
+	return err;
+}
+
+static struct platform_driver dnfb_driver = {
+	.probe	= dnfb_probe,
+	.driver	= {
+		.name	= "dnfb",
+	},
+};
+
+static struct platform_device dnfb_device = {
+	.name	= "dnfb",
+};
+
+static int __init dnfb_init(void)
+{
+	int ret;
+
+	if (!MACH_IS_APOLLO)
+		return -ENODEV;
+
+	if (fb_get_options("dnfb", NULL))
+		return -ENODEV;
+
+	ret = platform_driver_register(&dnfb_driver);
+
+	if (!ret) {
+		ret = platform_device_register(&dnfb_device);
+		if (ret)
+			platform_driver_unregister(&dnfb_driver);
+	}
+	return ret;
+}
+
+module_init(dnfb_init);
+
+MODULE_LICENSE("GPL");