Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 95 insertions, 0 deletions

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
new file mode 100644
index 000000000..a7144d275
--- /dev/null
+++ b/drivers/video/Kconfig
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Video configuration
+#
+
+menu "Graphics support"
+
+config APERTURE_HELPERS
+	bool
+	help
+	  Support tracking and hand-over of aperture ownership. Required
+	  by graphics drivers for firmware-provided framebuffers.
+
+config SCREEN_INFO
+	bool
+	default n
+
+config STI_CORE
+	bool
+	depends on PARISC
+	help
+	  STI refers to the HP "Standard Text Interface" which is a set of
+	  BIOS routines contained in a ROM chip in HP PA-RISC based machines.
+
+config VIDEO
+	bool
+	default n
+
+source "drivers/auxdisplay/Kconfig"
+
+if HAS_IOMEM
+
+config HAVE_FB_ATMEL
+	bool
+
+source "drivers/char/agp/Kconfig"
+
+source "drivers/gpu/vga/Kconfig"
+
+source "drivers/gpu/Kconfig"
+source "drivers/gpu/host1x/Kconfig"
+source "drivers/gpu/ipu-v3/Kconfig"
+source "drivers/gpu/nova-core/Kconfig"
+
+source "drivers/gpu/drm/Kconfig"
+
+menu "Frame buffer Devices"
+source "drivers/video/fbdev/Kconfig"
+endmenu
+
+source "drivers/video/backlight/Kconfig"
+
+config VGASTATE
+       tristate
+       default n
+
+config VIDEOMODE_HELPERS
+	bool
+
+config HDMI
+	bool
+
+endif # HAS_IOMEM
+
+config FIRMWARE_EDID
+	bool "Enable firmware EDID"
+	depends on EFI_GENERIC_STUB || X86
+	help
+	  This enables access to the EDID transferred from the firmware.
+	  On EFI systems, the EDID comes from the same device as the
+	  primary GOP. On x86 with BIOS, it comes from the VESA BIOS.
+	  DRM display drivers will be able to export the information
+	  to userspace.
+
+	  Also enable this if DDC/I2C transfers do not work for your driver
+	  and if you are using nvidiafb, i810fb or savagefb.
+
+	  In general, choosing Y for this option is safe.  If you
+	  experience extremely long delays while booting before you get
+	  something on your display, try setting this to N.  Matrox cards in
+	  combination with certain motherboards and monitors are known to
+	  suffer from this problem.
+
+if VT
+	source "drivers/video/console/Kconfig"
+endif
+
+if FB_CORE || SGI_NEWPORT_CONSOLE
+	source "drivers/video/logo/Kconfig"
+
+endif
+
+source "drivers/gpu/trace/Kconfig"
+
+endmenu