Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 177 insertions, 0 deletions

diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
new file mode 100644
index 000000000..363b8432c
--- /dev/null
+++ b/drivers/usb/serial/omninet.c
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB ZyXEL omni.net driver
+ *
+ * Copyright (C) 2013,2017 Johan Hovold <johan@kernel.org>
+ *
+ * See Documentation/usb/usb-serial.rst for more information on using this
+ * driver
+ *
+ * Please report both successes and troubles to the author at omninet@kroah.com
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+#define DRIVER_AUTHOR "Alessandro Zummo"
+#define DRIVER_DESC "USB ZyXEL omni.net Driver"
+
+#define ZYXEL_VENDOR_ID		0x0586
+#define ZYXEL_OMNINET_ID	0x1000
+#define ZYXEL_OMNI_56K_PLUS_ID	0x1500
+/* This one seems to be a re-branded ZyXEL device */
+#define BT_IGNITIONPRO_ID	0x2000
+
+#define OMNINET_HEADERLEN	4
+#define OMNINET_BULKOUTSIZE	64
+#define OMNINET_PAYLOADSIZE	(OMNINET_BULKOUTSIZE - OMNINET_HEADERLEN)
+
+/* function prototypes */
+static void omninet_process_read_urb(struct urb *urb);
+static int omninet_prepare_write_buffer(struct usb_serial_port *port,
+				void *buf, size_t count);
+static int omninet_calc_num_ports(struct usb_serial *serial,
+				struct usb_serial_endpoints *epds);
+static int omninet_port_probe(struct usb_serial_port *port);
+static void omninet_port_remove(struct usb_serial_port *port);
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) },
+	{ USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNI_56K_PLUS_ID) },
+	{ USB_DEVICE(ZYXEL_VENDOR_ID, BT_IGNITIONPRO_ID) },
+	{ }						/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_serial_driver zyxel_omninet_device = {
+	.driver = {
+		.name =		"omninet",
+	},
+	.description =		"ZyXEL - omni.net usb",
+	.id_table =		id_table,
+	.num_bulk_out =		2,
+	.bulk_out_size =	OMNINET_BULKOUTSIZE,
+	.calc_num_ports =	omninet_calc_num_ports,
+	.port_probe =		omninet_port_probe,
+	.port_remove =		omninet_port_remove,
+	.process_read_urb =	omninet_process_read_urb,
+	.prepare_write_buffer =	omninet_prepare_write_buffer,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&zyxel_omninet_device, NULL
+};
+
+
+/*
+ * The protocol.
+ *
+ * The omni.net always exchange 64 bytes of data with the host. The first
+ * four bytes are the control header.
+ *
+ * oh_seq is a sequence number. Don't know if/how it's used.
+ * oh_len is the length of the data bytes in the packet.
+ * oh_xxx Bit-mapped, related to handshaking and status info.
+ *	I normally set it to 0x03 in transmitted frames.
+ *	7: Active when the TA is in a CONNECTed state.
+ *	6: unknown
+ *	5: handshaking, unknown
+ *	4: handshaking, unknown
+ *	3: unknown, usually 0
+ *	2: unknown, usually 0
+ *	1: handshaking, unknown, usually set to 1 in transmitted frames
+ *	0: handshaking, unknown, usually set to 1 in transmitted frames
+ * oh_pad Probably a pad byte.
+ *
+ * After the header you will find data bytes if oh_len was greater than zero.
+ */
+struct omninet_header {
+	__u8	oh_seq;
+	__u8	oh_len;
+	__u8	oh_xxx;
+	__u8	oh_pad;
+};
+
+struct omninet_data {
+	__u8	od_outseq;	/* Sequence number for bulk_out URBs */
+};
+
+static int omninet_calc_num_ports(struct usb_serial *serial,
+					struct usb_serial_endpoints *epds)
+{
+	/* We need only the second bulk-out for our single-port device. */
+	epds->bulk_out[0] = epds->bulk_out[1];
+	epds->num_bulk_out = 1;
+
+	return 1;
+}
+
+static int omninet_port_probe(struct usb_serial_port *port)
+{
+	struct omninet_data *od;
+
+	od = kzalloc_obj(*od);
+	if (!od)
+		return -ENOMEM;
+
+	usb_set_serial_port_data(port, od);
+
+	return 0;
+}
+
+static void omninet_port_remove(struct usb_serial_port *port)
+{
+	struct omninet_data *od;
+
+	od = usb_get_serial_port_data(port);
+	kfree(od);
+}
+
+static void omninet_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	const struct omninet_header *hdr = urb->transfer_buffer;
+	const unsigned char *data;
+	size_t data_len;
+
+	if (urb->actual_length <= OMNINET_HEADERLEN || !hdr->oh_len)
+		return;
+
+	data = (char *)urb->transfer_buffer + OMNINET_HEADERLEN;
+	data_len = min_t(size_t, urb->actual_length - OMNINET_HEADERLEN,
+								hdr->oh_len);
+	tty_insert_flip_string(&port->port, data, data_len);
+	tty_flip_buffer_push(&port->port);
+}
+
+static int omninet_prepare_write_buffer(struct usb_serial_port *port,
+					void *buf, size_t count)
+{
+	struct omninet_data *od = usb_get_serial_port_data(port);
+	struct omninet_header *header = buf;
+
+	count = min_t(size_t, count, OMNINET_PAYLOADSIZE);
+
+	count = kfifo_out_locked(&port->write_fifo, buf + OMNINET_HEADERLEN,
+			count, &port->lock);
+
+	header->oh_seq = od->od_outseq++;
+	header->oh_len = count;
+	header->oh_xxx = 0x03;
+	header->oh_pad = 0x00;
+
+	/* always 64 bytes */
+	return OMNINET_BULKOUTSIZE;
+}
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");