ata: libata-scsi: fix ata_dsm_trim_pages() kernel-docgrafted

make htmldocs fails with:

  Documentation/driver-api/libata:604: ./drivers/ata/libata-scsi.c:2301:
  ERROR: Unexpected indentation. [docutils]

The Return: section of ata_dsm_trim_pages() ends its first sentence with
a colon and continues with an indented bullet list. reStructuredText
requires a blank line before an indented block, so docutils chokes on
the list.

Simply adding the missing blank line does not work either: Return: is a
kernel-doc "special section", which is terminated by the first blank
line, so the bullet list would end up in the Description section,
detached from the sentence introducing it.

Spell the two bounds out as prose instead, so that the Return: section
stays self-contained. Documentation-only change.

Fixes: e64e6b5dc867 ("ata: libata-scsi: scale DSM TRIM payload by MAX PAGES PER DSM COMMAND")
Reported-by: Thomas Huth <thuth@redhat.com>
Closes: https://lore.kernel.org/linux-ide/b0a0b8e8-cc4f-4c7b-8bc5-fee0712d405a@redhat.com/
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20260916130031.29990-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>

1 files changed, 122 insertions, 0 deletions

diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
new file mode 100644
index 000000000..4937575ca
--- /dev/null
+++ b/drivers/usb/serial/empeg.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB Empeg empeg-car player driver
+ *
+ *	Copyright (C) 2000, 2001
+ *	    Gary Brubaker (xavyer@ix.netcom.com)
+ *
+ *	Copyright (C) 1999 - 2001
+ *	    Greg Kroah-Hartman (greg@kroah.com)
+ *
+ * See Documentation/usb/usb-serial.rst for more information on using this
+ * driver
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Gary Brubaker <xavyer@ix.netcom.com>"
+#define DRIVER_DESC "USB Empeg Mark I/II Driver"
+
+#define EMPEG_VENDOR_ID			0x084f
+#define EMPEG_PRODUCT_ID		0x0001
+
+/* function prototypes for an empeg-car player */
+static int  empeg_startup(struct usb_serial *serial);
+static void empeg_init_termios(struct tty_struct *tty);
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(EMPEG_VENDOR_ID, EMPEG_PRODUCT_ID) },
+	{ }					/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_serial_driver empeg_device = {
+	.driver = {
+		.name =		"empeg",
+	},
+	.id_table =		id_table,
+	.num_ports =		1,
+	.bulk_out_size =	256,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
+	.attach =		empeg_startup,
+	.init_termios =		empeg_init_termios,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&empeg_device, NULL
+};
+
+static int empeg_startup(struct usb_serial *serial)
+{
+	int r;
+
+	if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
+		dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
+			serial->dev->actconfig->desc.bConfigurationValue);
+		return -ENODEV;
+	}
+
+	r = usb_reset_configuration(serial->dev);
+
+	/* continue on with initialization */
+	return r;
+}
+
+static void empeg_init_termios(struct tty_struct *tty)
+{
+	struct ktermios *termios = &tty->termios;
+
+	/*
+	 * The empeg-car player wants these particular tty settings.
+	 * You could, for example, change the baud rate, however the
+	 * player only supports 115200 (currently), so there is really
+	 * no point in support for changes to the tty settings.
+	 * (at least for now)
+	 *
+	 * The default requirements for this device are:
+	 */
+	termios->c_iflag
+		&= ~(IGNBRK	/* disable ignore break */
+		| BRKINT	/* disable break causes interrupt */
+		| PARMRK	/* disable mark parity errors */
+		| ISTRIP	/* disable clear high bit of input characters */
+		| INLCR		/* disable translate NL to CR */
+		| IGNCR		/* disable ignore CR */
+		| ICRNL		/* disable translate CR to NL */
+		| IXON);	/* disable enable XON/XOFF flow control */
+
+	termios->c_oflag
+		&= ~OPOST;	/* disable postprocess output characters */
+
+	termios->c_lflag
+		&= ~(ECHO	/* disable echo input characters */
+		| ECHONL	/* disable echo new line */
+		| ICANON	/* disable erase, kill, werase, and rprnt special characters */
+		| ISIG		/* disable interrupt, quit, and suspend special characters */
+		| IEXTEN);	/* disable non-POSIX special characters */
+
+	termios->c_cflag
+		&= ~(CSIZE	/* no size */
+		| PARENB	/* disable parity bit */
+		| CBAUD);	/* clear current baud rate */
+
+	termios->c_cflag
+		|= CS8;		/* character size 8 bits */
+
+	tty_encode_baud_rate(tty, 115200, 115200);
+}
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");