Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 122 insertions, 0 deletions

diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
new file mode 100644
index 000000000..4937575ca
--- /dev/null
+++ b/drivers/usb/serial/empeg.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB Empeg empeg-car player driver
+ *
+ *	Copyright (C) 2000, 2001
+ *	    Gary Brubaker (xavyer@ix.netcom.com)
+ *
+ *	Copyright (C) 1999 - 2001
+ *	    Greg Kroah-Hartman (greg@kroah.com)
+ *
+ * See Documentation/usb/usb-serial.rst for more information on using this
+ * driver
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Gary Brubaker <xavyer@ix.netcom.com>"
+#define DRIVER_DESC "USB Empeg Mark I/II Driver"
+
+#define EMPEG_VENDOR_ID			0x084f
+#define EMPEG_PRODUCT_ID		0x0001
+
+/* function prototypes for an empeg-car player */
+static int  empeg_startup(struct usb_serial *serial);
+static void empeg_init_termios(struct tty_struct *tty);
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(EMPEG_VENDOR_ID, EMPEG_PRODUCT_ID) },
+	{ }					/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_serial_driver empeg_device = {
+	.driver = {
+		.name =		"empeg",
+	},
+	.id_table =		id_table,
+	.num_ports =		1,
+	.bulk_out_size =	256,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
+	.attach =		empeg_startup,
+	.init_termios =		empeg_init_termios,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&empeg_device, NULL
+};
+
+static int empeg_startup(struct usb_serial *serial)
+{
+	int r;
+
+	if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
+		dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
+			serial->dev->actconfig->desc.bConfigurationValue);
+		return -ENODEV;
+	}
+
+	r = usb_reset_configuration(serial->dev);
+
+	/* continue on with initialization */
+	return r;
+}
+
+static void empeg_init_termios(struct tty_struct *tty)
+{
+	struct ktermios *termios = &tty->termios;
+
+	/*
+	 * The empeg-car player wants these particular tty settings.
+	 * You could, for example, change the baud rate, however the
+	 * player only supports 115200 (currently), so there is really
+	 * no point in support for changes to the tty settings.
+	 * (at least for now)
+	 *
+	 * The default requirements for this device are:
+	 */
+	termios->c_iflag
+		&= ~(IGNBRK	/* disable ignore break */
+		| BRKINT	/* disable break causes interrupt */
+		| PARMRK	/* disable mark parity errors */
+		| ISTRIP	/* disable clear high bit of input characters */
+		| INLCR		/* disable translate NL to CR */
+		| IGNCR		/* disable ignore CR */
+		| ICRNL		/* disable translate CR to NL */
+		| IXON);	/* disable enable XON/XOFF flow control */
+
+	termios->c_oflag
+		&= ~OPOST;	/* disable postprocess output characters */
+
+	termios->c_lflag
+		&= ~(ECHO	/* disable echo input characters */
+		| ECHONL	/* disable echo new line */
+		| ICANON	/* disable erase, kill, werase, and rprnt special characters */
+		| ISIG		/* disable interrupt, quit, and suspend special characters */
+		| IEXTEN);	/* disable non-POSIX special characters */
+
+	termios->c_cflag
+		&= ~(CSIZE	/* no size */
+		| PARENB	/* disable parity bit */
+		| CBAUD);	/* clear current baud rate */
+
+	termios->c_cflag
+		|= CS8;		/* character size 8 bits */
+
+	tty_encode_baud_rate(tty, 115200, 115200);
+}
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");