Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 348 insertions, 0 deletions

diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
new file mode 100644
index 000000000..de26b3023
--- /dev/null
+++ b/drivers/usb/phy/phy-generic.c
@@ -0,0 +1,348 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * NOP USB transceiver for all USB transceiver which are either built-in
+ * into USB IP or which are mostly autonomous.
+ *
+ * Copyright (C) 2009 Texas Instruments Inc
+ * Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ *
+ * Current status:
+ *	This provides a "nop" transceiver for PHYs which are
+ *	autonomous such as isp1504, isp1707, etc.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/usb_phy_generic.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+#include <linux/property.h>
+#include <linux/gpio/consumer.h>
+#include <linux/delay.h>
+
+#include "phy-generic.h"
+
+#define VBUS_IRQ_FLAGS \
+	(IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | \
+		IRQF_ONESHOT)
+
+struct platform_device *usb_phy_generic_register(void)
+{
+	return platform_device_register_simple("usb_phy_generic",
+			PLATFORM_DEVID_AUTO, NULL, 0);
+}
+EXPORT_SYMBOL_GPL(usb_phy_generic_register);
+
+void usb_phy_generic_unregister(struct platform_device *pdev)
+{
+	platform_device_unregister(pdev);
+}
+EXPORT_SYMBOL_GPL(usb_phy_generic_unregister);
+
+static int nop_set_suspend(struct usb_phy *x, int suspend)
+{
+	struct usb_phy_generic *nop = dev_get_drvdata(x->dev);
+	int ret = 0;
+
+	if (suspend) {
+		clk_disable_unprepare(nop->clk);
+		if (!IS_ERR(nop->vcc) && !device_may_wakeup(x->dev))
+			ret = regulator_disable(nop->vcc);
+	} else {
+		if (!IS_ERR(nop->vcc) && !device_may_wakeup(x->dev))
+			ret = regulator_enable(nop->vcc);
+		clk_prepare_enable(nop->clk);
+	}
+
+	return ret;
+}
+
+static void nop_reset(struct usb_phy_generic *nop)
+{
+	if (!nop->gpiod_reset)
+		return;
+
+	gpiod_set_value_cansleep(nop->gpiod_reset, 1);
+	usleep_range(10000, 20000);
+	gpiod_set_value_cansleep(nop->gpiod_reset, 0);
+	usleep_range(10000, 30000);
+}
+
+/* interface to regulator framework */
+static int nop_set_vbus(struct usb_otg *otg, bool enable)
+{
+	int ret = 0;
+	struct usb_phy_generic *nop = dev_get_drvdata(otg->usb_phy->dev);
+
+	if (!nop->vbus_draw)
+		return 0;
+
+	if (enable && !nop->vbus_draw_enabled) {
+		ret = regulator_enable(nop->vbus_draw);
+		if (ret)
+			nop->vbus_draw_enabled = false;
+		else
+			nop->vbus_draw_enabled = true;
+
+	} else if (!enable && nop->vbus_draw_enabled) {
+		ret = regulator_disable(nop->vbus_draw);
+		nop->vbus_draw_enabled = false;
+	}
+	return ret;
+}
+
+
+static irqreturn_t nop_gpio_vbus_thread(int irq, void *data)
+{
+	struct usb_phy_generic *nop = data;
+	struct usb_otg *otg = nop->phy.otg;
+	int vbus, status;
+
+	vbus = gpiod_get_value(nop->gpiod_vbus);
+	if ((vbus ^ nop->vbus) == 0)
+		return IRQ_HANDLED;
+	nop->vbus = vbus;
+
+	if (vbus) {
+		status = USB_EVENT_VBUS;
+		otg->state = OTG_STATE_B_PERIPHERAL;
+		nop->phy.last_event = status;
+
+		atomic_notifier_call_chain(&nop->phy.notifier, status,
+					   otg->gadget);
+	} else {
+		status = USB_EVENT_NONE;
+		otg->state = OTG_STATE_B_IDLE;
+		nop->phy.last_event = status;
+
+		atomic_notifier_call_chain(&nop->phy.notifier, status,
+					   otg->gadget);
+	}
+	return IRQ_HANDLED;
+}
+
+int usb_gen_phy_init(struct usb_phy *phy)
+{
+	struct usb_phy_generic *nop = dev_get_drvdata(phy->dev);
+	int ret;
+
+	if (!IS_ERR(nop->vcc)) {
+		if (regulator_enable(nop->vcc))
+			dev_err(phy->dev, "Failed to enable power\n");
+	}
+
+	ret = clk_prepare_enable(nop->clk);
+	if (ret)
+		return ret;
+
+	nop_reset(nop);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_gen_phy_init);
+
+void usb_gen_phy_shutdown(struct usb_phy *phy)
+{
+	struct usb_phy_generic *nop = dev_get_drvdata(phy->dev);
+
+	gpiod_set_value_cansleep(nop->gpiod_reset, 1);
+
+	clk_disable_unprepare(nop->clk);
+
+	if (!IS_ERR(nop->vcc)) {
+		if (regulator_disable(nop->vcc))
+			dev_err(phy->dev, "Failed to disable power\n");
+	}
+}
+EXPORT_SYMBOL_GPL(usb_gen_phy_shutdown);
+
+static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
+{
+	if (!otg)
+		return -ENODEV;
+
+	if (!gadget) {
+		otg->gadget = NULL;
+		return -ENODEV;
+	}
+
+	otg->gadget = gadget;
+	if (otg->state == OTG_STATE_B_PERIPHERAL)
+		atomic_notifier_call_chain(&otg->usb_phy->notifier,
+					   USB_EVENT_VBUS, otg->gadget);
+	else
+		otg->state = OTG_STATE_B_IDLE;
+	return 0;
+}
+
+static int nop_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+	if (!otg)
+		return -ENODEV;
+
+	if (!host) {
+		otg->host = NULL;
+		return -ENODEV;
+	}
+
+	otg->host = host;
+	return 0;
+}
+
+int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop)
+{
+	enum usb_phy_type type = USB_PHY_TYPE_USB2;
+	int err = 0;
+	u32 clk_rate = 0;
+
+	device_property_read_u32(dev, "clock-frequency", &clk_rate);
+	nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset",
+						   GPIOD_ASIS);
+	err = PTR_ERR_OR_ZERO(nop->gpiod_reset);
+	if (!err) {
+		nop->gpiod_vbus = devm_gpiod_get_optional(dev,
+						 "vbus-detect",
+						 GPIOD_ASIS);
+		err = PTR_ERR_OR_ZERO(nop->gpiod_vbus);
+	}
+
+	if (err)
+		return dev_err_probe(dev, err,
+				     "Error requesting RESET or VBUS GPIO\n");
+	if (nop->gpiod_reset)
+		gpiod_direction_output(nop->gpiod_reset, 1);
+
+	nop->phy.otg = devm_kzalloc(dev, sizeof(*nop->phy.otg),
+			GFP_KERNEL);
+	if (!nop->phy.otg)
+		return -ENOMEM;
+
+	nop->clk = devm_clk_get_optional(dev, "main_clk");
+	if (IS_ERR(nop->clk))
+		return dev_err_probe(dev, PTR_ERR(nop->clk),
+				     "Can't get phy clock\n");
+
+	if (clk_rate) {
+		err = clk_set_rate(nop->clk, clk_rate);
+		if (err)
+			return dev_err_probe(dev, err,
+					     "Error setting clock rate\n");
+	}
+
+	nop->vcc = devm_regulator_get_optional(dev, "vcc");
+	if (IS_ERR(nop->vcc) && PTR_ERR(nop->vcc) != -ENODEV)
+		return dev_err_probe(dev, PTR_ERR(nop->vcc),
+				     "could not get vcc regulator\n");
+
+	nop->vbus_draw = devm_regulator_get_exclusive(dev, "vbus");
+	if (PTR_ERR(nop->vbus_draw) == -ENODEV)
+		nop->vbus_draw = NULL;
+	if (IS_ERR(nop->vbus_draw))
+		return dev_err_probe(dev, PTR_ERR(nop->vbus_draw),
+				     "could not get vbus regulator\n");
+
+	nop->dev		= dev;
+	nop->phy.dev		= nop->dev;
+	nop->phy.label		= "nop-xceiv";
+	nop->phy.set_suspend	= nop_set_suspend;
+	nop->phy.type		= type;
+
+	nop->phy.otg->state		= OTG_STATE_UNDEFINED;
+	nop->phy.otg->usb_phy		= &nop->phy;
+	nop->phy.otg->set_host		= nop_set_host;
+	nop->phy.otg->set_peripheral	= nop_set_peripheral;
+	nop->phy.otg->set_vbus          = nop_set_vbus;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy);
+
+static int usb_phy_generic_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct usb_phy_generic	*nop;
+	int err;
+
+	nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL);
+	if (!nop)
+		return -ENOMEM;
+
+	err = usb_phy_gen_create_phy(dev, nop);
+	if (err)
+		return err;
+
+	if (nop->gpiod_vbus) {
+		err = devm_request_threaded_irq(dev,
+						gpiod_to_irq(nop->gpiod_vbus),
+						NULL, nop_gpio_vbus_thread,
+						VBUS_IRQ_FLAGS, "vbus_detect",
+						nop);
+		if (err)
+			return dev_err_probe(dev, err, "can't request irq %i\n",
+					     gpiod_to_irq(nop->gpiod_vbus));
+
+		nop->phy.otg->state = gpiod_get_value(nop->gpiod_vbus) ?
+			OTG_STATE_B_PERIPHERAL : OTG_STATE_B_IDLE;
+	}
+
+	nop->phy.init		= usb_gen_phy_init;
+	nop->phy.shutdown	= usb_gen_phy_shutdown;
+
+	err = usb_add_phy_dev(&nop->phy);
+	if (err)
+		return dev_err_probe(dev, err, "can't register transceiver\n");
+
+	platform_set_drvdata(pdev, nop);
+
+	device_set_wakeup_capable(dev,
+				  device_property_read_bool(dev, "wakeup-source"));
+
+	return 0;
+}
+
+static void usb_phy_generic_remove(struct platform_device *pdev)
+{
+	struct usb_phy_generic *nop = platform_get_drvdata(pdev);
+
+	usb_remove_phy(&nop->phy);
+
+	if (nop->vbus_draw && nop->vbus_draw_enabled)
+		regulator_disable(nop->vbus_draw);
+}
+
+static const struct of_device_id nop_xceiv_dt_ids[] = {
+	{ .compatible = "usb-nop-xceiv" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, nop_xceiv_dt_ids);
+
+static struct platform_driver usb_phy_generic_driver = {
+	.probe		= usb_phy_generic_probe,
+	.remove		= usb_phy_generic_remove,
+	.driver		= {
+		.name	= "usb_phy_generic",
+		.of_match_table = nop_xceiv_dt_ids,
+	},
+};
+
+static int __init usb_phy_generic_init(void)
+{
+	return platform_driver_register(&usb_phy_generic_driver);
+}
+subsys_initcall(usb_phy_generic_init);
+
+static void __exit usb_phy_generic_exit(void)
+{
+	platform_driver_unregister(&usb_phy_generic_driver);
+}
+module_exit(usb_phy_generic_exit);
+
+MODULE_ALIAS("platform:usb_phy_generic");
+MODULE_AUTHOR("Texas Instruments Inc");
+MODULE_DESCRIPTION("NOP USB Transceiver driver");
+MODULE_LICENSE("GPL");