arm64/boot: Disable trapping of PMZR_EL0 writes to EL2grafted

__init_el2_fgt2() writes one mask to both HDFGRTR2_EL2 and HDFGWTR2_EL2.
PMZR_EL0 is write-only, so its trap bit, nPMZR_EL0, exists only in
HDFGWTR2_EL2 and is therefore never set: a PMZR_EL0 write from the host
traps to EL2, where the nVHE hypervisor has no handler and BUG()s. The
kernel never writes PMZR_EL0, but kernel.perf_user_access=1 has the PMU
driver set PMUSERENR_EL0.UEN for a task with a user-read event, so a
write from EL0 reaches the trap and takes the host down without a panic
message.

Accumulate the HDFGWTR2_EL2 bits separately, as __init_el2_fgt() already
does for HDFGWTR_EL2, and set nPMZR_EL0 with the other FEAT_PMUv3p9
bits.

Fixes: 858c7bfcb35e1 ("arm64/boot: Enable EL2 requirements for FEAT_PMUv3p9")
Cc: stable@vger.kernel.org
Signed-off-by: Fuad Tabba <fuad.tabba@linux.dev>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>

1 files changed, 24 insertions, 0 deletions

diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
new file mode 100644
index 000000000..ceae46c53
--- /dev/null
+++ b/drivers/usb/phy/Makefile
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for physical layer USB drivers
+#
+obj-$(CONFIG_USB_PHY)			+= phy.o
+obj-$(CONFIG_OF)			+= of.o
+
+# transceiver drivers, keep the list sorted
+
+obj-$(CONFIG_AB8500_USB)		+= phy-ab8500-usb.o
+obj-$(CONFIG_FSL_USB2_OTG)		+= phy-fsl-usb.o
+obj-$(CONFIG_NOP_USB_XCEIV)		+= phy-generic.o
+obj-$(CONFIG_TAHVO_USB)			+= phy-tahvo.o
+obj-$(CONFIG_AM335X_CONTROL_USB)	+= phy-am335x-control.o
+obj-$(CONFIG_AM335X_PHY_USB)		+= phy-am335x.o
+obj-$(CONFIG_OMAP_OTG)			+= phy-omap-otg.o
+obj-$(CONFIG_TWL6030_USB)		+= phy-twl6030-usb.o
+obj-$(CONFIG_USB_TEGRA_PHY)		+= phy-tegra-usb.o
+obj-$(CONFIG_USB_GPIO_VBUS)		+= phy-gpio-vbus-usb.o
+obj-$(CONFIG_USB_ISP1301)		+= phy-isp1301.o
+obj-$(CONFIG_USB_MXS_PHY)		+= phy-mxs-usb.o
+obj-$(CONFIG_USB_ULPI)			+= phy-ulpi.o
+obj-$(CONFIG_USB_ULPI_VIEWPORT)		+= phy-ulpi-viewport.o
+obj-$(CONFIG_KEYSTONE_USB_PHY)		+= phy-keystone.o