drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 152 insertions, 0 deletions

diff --git a/drivers/usb/misc/ezusb.c b/drivers/usb/misc/ezusb.c
new file mode 100644
index 000000000..7ab4856ab
--- /dev/null
+++ b/drivers/usb/misc/ezusb.c
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * EZ-USB specific functions used by some of the USB to Serial drivers.
+ *
+ * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/firmware.h>
+#include <linux/ihex.h>
+#include <linux/usb/ezusb.h>
+
+struct ezusb_fx_type {
+	/* EZ-USB Control and Status Register.  Bit 0 controls 8051 reset */
+	unsigned short cpucs_reg;
+	unsigned short max_internal_adress;
+};
+
+static const struct ezusb_fx_type ezusb_fx1 = {
+	.cpucs_reg = 0x7F92,
+	.max_internal_adress = 0x1B3F,
+};
+
+/* Commands for writing to memory */
+#define WRITE_INT_RAM 0xA0
+#define WRITE_EXT_RAM 0xA3
+
+static int ezusb_writememory(struct usb_device *dev, int address,
+				unsigned char *data, int length, __u8 request)
+{
+	if (!dev)
+		return -ENODEV;
+
+	return usb_control_msg_send(dev, 0, request,
+				 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+				 address, 0, data, length, 3000, GFP_KERNEL);
+}
+
+static int ezusb_set_reset(struct usb_device *dev, unsigned short cpucs_reg,
+			   unsigned char reset_bit)
+{
+	int response = ezusb_writememory(dev, cpucs_reg, &reset_bit, 1, WRITE_INT_RAM);
+	if (response < 0)
+		dev_err(&dev->dev, "%s-%d failed: %d\n",
+						__func__, reset_bit, response);
+	return response;
+}
+
+int ezusb_fx1_set_reset(struct usb_device *dev, unsigned char reset_bit)
+{
+	return ezusb_set_reset(dev, ezusb_fx1.cpucs_reg, reset_bit);
+}
+EXPORT_SYMBOL_GPL(ezusb_fx1_set_reset);
+
+static int ezusb_ihex_firmware_download(struct usb_device *dev,
+					struct ezusb_fx_type fx,
+					const char *firmware_path)
+{
+	int ret = -ENOENT;
+	const struct firmware *firmware = NULL;
+	const struct ihex_binrec *record;
+
+	if (request_ihex_firmware(&firmware, firmware_path,
+				  &dev->dev)) {
+		dev_err(&dev->dev,
+			"%s - request \"%s\" failed\n",
+			__func__, firmware_path);
+		goto out;
+	}
+
+	ret = ezusb_set_reset(dev, fx.cpucs_reg, 0);
+	if (ret < 0)
+		goto out;
+
+	record = (const struct ihex_binrec *)firmware->data;
+	for (; record; record = ihex_next_binrec(record)) {
+		if (be32_to_cpu(record->addr) > fx.max_internal_adress) {
+			ret = ezusb_writememory(dev, be32_to_cpu(record->addr),
+						(unsigned char *)record->data,
+						be16_to_cpu(record->len), WRITE_EXT_RAM);
+			if (ret < 0) {
+				dev_err(&dev->dev, "%s - ezusb_writememory "
+					"failed writing internal memory "
+					"(%d %04X %p %d)\n", __func__, ret,
+					be32_to_cpu(record->addr), record->data,
+					be16_to_cpu(record->len));
+				goto out;
+			}
+		}
+	}
+
+	ret = ezusb_set_reset(dev, fx.cpucs_reg, 1);
+	if (ret < 0)
+		goto out;
+	record = (const struct ihex_binrec *)firmware->data;
+	for (; record; record = ihex_next_binrec(record)) {
+		if (be32_to_cpu(record->addr) <= fx.max_internal_adress) {
+			ret = ezusb_writememory(dev, be32_to_cpu(record->addr),
+						(unsigned char *)record->data,
+						be16_to_cpu(record->len), WRITE_INT_RAM);
+			if (ret < 0) {
+				dev_err(&dev->dev, "%s - ezusb_writememory "
+					"failed writing external memory "
+					"(%d %04X %p %d)\n", __func__, ret,
+					be32_to_cpu(record->addr), record->data,
+					be16_to_cpu(record->len));
+				goto out;
+			}
+		}
+	}
+	ret = ezusb_set_reset(dev, fx.cpucs_reg, 0);
+out:
+	release_firmware(firmware);
+	return ret;
+}
+
+int ezusb_fx1_ihex_firmware_download(struct usb_device *dev,
+				     const char *firmware_path)
+{
+	return ezusb_ihex_firmware_download(dev, ezusb_fx1, firmware_path);
+}
+EXPORT_SYMBOL_GPL(ezusb_fx1_ihex_firmware_download);
+
+#if 0
+/*
+ * Once someone one needs these fx2 functions, uncomment them
+ * and add them to ezusb.h and all should be good.
+ */
+static struct ezusb_fx_type ezusb_fx2 = {
+	.cpucs_reg = 0xE600,
+	.max_internal_adress = 0x3FFF,
+};
+
+int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit)
+{
+	return ezusb_set_reset(dev, ezusb_fx2.cpucs_reg, reset_bit);
+}
+EXPORT_SYMBOL_GPL(ezusb_fx2_set_reset);
+
+int ezusb_fx2_ihex_firmware_download(struct usb_device *dev,
+				     const char *firmware_path)
+{
+	return ezusb_ihex_firmware_download(dev, ezusb_fx2, firmware_path);
+}
+EXPORT_SYMBOL_GPL(ezusb_fx2_ihex_firmware_download);
+#endif
+
+MODULE_DESCRIPTION("EZUSB device support");
+MODULE_LICENSE("GPL");