ARM: 9485/1: mm: acquire mmap write lock around show_pte() for user faultsgrafted

When CONFIG_DEBUG_USER=y, and cmdline "user_debug=31" is set,
a user fault may trigger show_pte() without any lock.
If another thread in the same process concurrently calls munmap(),
the page table pages may be freed while show_pte() is still traversing
them, causing a use-after-free in show_pte().

If CONFIG_ARM_LPAE=y, this may cause a kernel panic if the pages table
of PMD are freed when show_pte() is running.

Acquire mmap_write_lock() around show_pte() for user faults to fix the
contention.

For user faults, additionally restrict that show_pte() is called only
when the addr is a user-space address (addr < TASK_SIZE). This is because
the lock of tsk->mm only protects the virtual memory of user address space,
furthermore, dumping the page tables of a kernel-space address for user
faults is unnecessary and may have security implications.

Keep everything unchanged for kernel faults, because the kernel is
already in the "oops" state, acquiring a lock may risk a deadlock.

Co-developed-by: Qi Xi <xiqi2@huawei.com>

Fixes: 6d021b724481 ("ARM: dump pgd, pmd and pte states on unhandled data abort faults")
Link: https://lore.kernel.org/20260716014022.2823-1-xieyuanbin1@huawei.com
Acked-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Qi Xi <xiqi2@huawei.com>
Signed-off-by: Xie Yuanbin <xieyuanbin1@huawei.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

1 files changed, 190 insertions, 0 deletions

diff --git a/drivers/usb/misc/ehset.c b/drivers/usb/misc/ehset.c
new file mode 100644
index 000000000..36b6e9fa7
--- /dev/null
+++ b/drivers/usb/misc/ehset.c
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2010-2013, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/usb/ch11.h>
+
+#define TEST_SE0_NAK_PID			0x0101
+#define TEST_J_PID				0x0102
+#define TEST_K_PID				0x0103
+#define TEST_PACKET_PID				0x0104
+#define TEST_HS_HOST_PORT_SUSPEND_RESUME	0x0106
+#define TEST_SINGLE_STEP_GET_DEV_DESC		0x0107
+#define TEST_SINGLE_STEP_SET_FEATURE		0x0108
+
+extern const struct usb_device_id *usb_device_match_id(struct usb_device *udev,
+						const struct usb_device_id *id);
+
+/*
+ * A list of USB hubs which requires to disable the power
+ * to the port before starting the testing procedures.
+ */
+static const struct usb_device_id ehset_hub_list[] = {
+	{ USB_DEVICE(0x0424, 0x4502) },
+	{ USB_DEVICE(0x0424, 0x4913) },
+	{ USB_DEVICE(0x0451, 0x8027) },
+	{ }
+};
+
+static int ehset_prepare_port_for_testing(struct usb_device *hub_udev, u16 portnum)
+{
+	int ret = 0;
+
+	/*
+	 * The USB2.0 spec chapter 11.24.2.13 says that the USB port which is
+	 * going under test needs to be put in suspend before sending the
+	 * test command. Most hubs don't enforce this precondition, but there
+	 * are some hubs which needs to disable the power to the port before
+	 * starting the test.
+	 */
+	if (usb_device_match_id(hub_udev, ehset_hub_list)) {
+		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_CLEAR_FEATURE,
+					   USB_RT_PORT, USB_PORT_FEAT_ENABLE,
+					   portnum, NULL, 0, 1000, GFP_KERNEL);
+		/*
+		 * Wait for the port to be disabled. It's an arbitrary value
+		 * which worked every time.
+		 */
+		msleep(100);
+	} else {
+		/*
+		 * For the hubs which are compliant with the spec,
+		 * put the port in SUSPEND.
+		 */
+		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
+					   USB_RT_PORT, USB_PORT_FEAT_SUSPEND,
+					   portnum, NULL, 0, 1000, GFP_KERNEL);
+	}
+	return ret;
+}
+
+static int ehset_probe(struct usb_interface *intf,
+		       const struct usb_device_id *id)
+{
+	int ret = -EINVAL;
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usb_device *hub_udev = dev->parent;
+	struct usb_device_descriptor buf;
+	u8 portnum = dev->portnum;
+	u16 test_pid = le16_to_cpu(dev->descriptor.idProduct);
+
+	switch (test_pid) {
+	case TEST_SE0_NAK_PID:
+		ret = ehset_prepare_port_for_testing(hub_udev, portnum);
+		if (ret < 0)
+			break;
+		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
+					   USB_RT_PORT, USB_PORT_FEAT_TEST,
+					   (USB_TEST_SE0_NAK << 8) | portnum,
+					   NULL, 0, 1000, GFP_KERNEL);
+		break;
+	case TEST_J_PID:
+		ret = ehset_prepare_port_for_testing(hub_udev, portnum);
+		if (ret < 0)
+			break;
+		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
+					   USB_RT_PORT, USB_PORT_FEAT_TEST,
+					   (USB_TEST_J << 8) | portnum, NULL, 0,
+					   1000, GFP_KERNEL);
+		break;
+	case TEST_K_PID:
+		ret = ehset_prepare_port_for_testing(hub_udev, portnum);
+		if (ret < 0)
+			break;
+		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
+					   USB_RT_PORT, USB_PORT_FEAT_TEST,
+					   (USB_TEST_K << 8) | portnum, NULL, 0,
+					   1000, GFP_KERNEL);
+		break;
+	case TEST_PACKET_PID:
+		ret = ehset_prepare_port_for_testing(hub_udev, portnum);
+		if (ret < 0)
+			break;
+		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
+					   USB_RT_PORT, USB_PORT_FEAT_TEST,
+					   (USB_TEST_PACKET << 8) | portnum,
+					   NULL, 0, 1000, GFP_KERNEL);
+		break;
+	case TEST_HS_HOST_PORT_SUSPEND_RESUME:
+		/* Test: wait for 15secs -> suspend -> 15secs delay -> resume */
+		msleep(15 * 1000);
+		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
+					   USB_RT_PORT, USB_PORT_FEAT_SUSPEND,
+					   portnum, NULL, 0, 1000, GFP_KERNEL);
+		if (ret < 0)
+			break;
+
+		msleep(15 * 1000);
+		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_CLEAR_FEATURE,
+					   USB_RT_PORT, USB_PORT_FEAT_SUSPEND,
+					   portnum, NULL, 0, 1000, GFP_KERNEL);
+		break;
+	case TEST_SINGLE_STEP_GET_DEV_DESC:
+		/* Test: wait for 15secs -> GetDescriptor request */
+		msleep(15 * 1000);
+
+		ret = usb_control_msg_recv(dev, 0, USB_REQ_GET_DESCRIPTOR,
+					   USB_DIR_IN, USB_DT_DEVICE << 8, 0,
+					   &buf, USB_DT_DEVICE_SIZE,
+					   USB_CTRL_GET_TIMEOUT, GFP_KERNEL);
+		break;
+	case TEST_SINGLE_STEP_SET_FEATURE:
+		/*
+		 * GetDescriptor SETUP request -> 15secs delay -> IN & STATUS
+		 *
+		 * Note, this test is only supported on root hubs since the
+		 * SetPortFeature handling can only be done inside the HCD's
+		 * hub_control callback function.
+		 */
+		if (hub_udev != dev->bus->root_hub) {
+			dev_err(&intf->dev, "SINGLE_STEP_SET_FEATURE test only supported on root hub\n");
+			break;
+		}
+
+		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
+					   USB_RT_PORT, USB_PORT_FEAT_TEST,
+					   (6 << 8) | portnum, NULL, 0,
+					   60 * 1000, GFP_KERNEL);
+
+		break;
+	default:
+		dev_err(&intf->dev, "%s: unsupported PID: 0x%x\n",
+			__func__, test_pid);
+	}
+
+	return ret;
+}
+
+static void ehset_disconnect(struct usb_interface *intf)
+{
+}
+
+static const struct usb_device_id ehset_id_table[] = {
+	{ USB_DEVICE(0x1a0a, TEST_SE0_NAK_PID) },
+	{ USB_DEVICE(0x1a0a, TEST_J_PID) },
+	{ USB_DEVICE(0x1a0a, TEST_K_PID) },
+	{ USB_DEVICE(0x1a0a, TEST_PACKET_PID) },
+	{ USB_DEVICE(0x1a0a, TEST_HS_HOST_PORT_SUSPEND_RESUME) },
+	{ USB_DEVICE(0x1a0a, TEST_SINGLE_STEP_GET_DEV_DESC) },
+	{ USB_DEVICE(0x1a0a, TEST_SINGLE_STEP_SET_FEATURE) },
+	{ }			/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, ehset_id_table);
+
+static struct usb_driver ehset_driver = {
+	.name =		"usb_ehset_test",
+	.probe =	ehset_probe,
+	.disconnect =	ehset_disconnect,
+	.id_table =	ehset_id_table,
+};
+
+module_usb_driver(ehset_driver);
+
+MODULE_DESCRIPTION("USB Driver for EHSET Test Fixture");
+MODULE_LICENSE("GPL v2");