arm64/boot: Disable trapping of PMZR_EL0 writes to EL2grafted

__init_el2_fgt2() writes one mask to both HDFGRTR2_EL2 and HDFGWTR2_EL2.
PMZR_EL0 is write-only, so its trap bit, nPMZR_EL0, exists only in
HDFGWTR2_EL2 and is therefore never set: a PMZR_EL0 write from the host
traps to EL2, where the nVHE hypervisor has no handler and BUG()s. The
kernel never writes PMZR_EL0, but kernel.perf_user_access=1 has the PMU
driver set PMUSERENR_EL0.UEN for a task with a user-read event, so a
write from EL0 reaches the trap and takes the host down without a panic
message.

Accumulate the HDFGWTR2_EL2 bits separately, as __init_el2_fgt() already
does for HDFGWTR_EL2, and set nPMZR_EL0 with the other FEAT_PMUv3p9
bits.

Fixes: 858c7bfcb35e1 ("arm64/boot: Enable EL2 requirements for FEAT_PMUv3p9")
Cc: stable@vger.kernel.org
Signed-off-by: Fuad Tabba <fuad.tabba@linux.dev>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>

1 files changed, 49 insertions, 0 deletions

diff --git a/drivers/usb/class/Kconfig b/drivers/usb/class/Kconfig
new file mode 100644
index 000000000..d3f5162bd
--- /dev/null
+++ b/drivers/usb/class/Kconfig
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# USB Class driver configuration
+#
+comment "USB Device Class drivers"
+
+config USB_ACM
+	tristate "USB Modem (CDC ACM) support"
+	depends on TTY
+	help
+	  This driver supports USB modems and ISDN adapters which support the
+	  Communication Device Class Abstract Control Model interface.
+	  Please read <file:Documentation/usb/acm.rst> for details.
+
+	  If your modem only reports "Cls=ff(vend.)" in the descriptors in
+	  /sys/kernel/debug/usb/devices, then your modem will not work with this
+	  driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cdc-acm.
+
+config USB_PRINTER
+	tristate "USB Printer support"
+	help
+	  Say Y here if you want to connect a USB printer to your computer's
+	  USB port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called usblp.
+
+config USB_WDM
+	tristate "USB Wireless Device Management support"
+	help
+	  This driver supports the WMC Device Management functionality
+	  of cell phones compliant to the CDC WMC specification. You can use
+	  AT commands over this device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cdc-wdm.
+
+config USB_TMC
+	tristate "USB Test and Measurement Class support"
+	help
+	  Say Y here if you want to connect a USB device that follows
+	  the USB.org specification for USB Test and Measurement devices
+	  to your computer's USB port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called usbtmc.