ftrace: Synchronize the initialization of ftrace_opsgrafted

There's some internal state that ftrace_ops needs to have set, but since
it can be declared outside of the ftrace.c code, it calls
ftrace_ops_init() on the ops in every global function. The issue is that
if two tasks call it on the same ops at the same time it is possible to
have the initialization of one corrupt the initialization of the other
call.

Create a ops_mutex to use to synchronize every initialization of the
ftrace_ops. The mutex is taken within checking the ftrace_ops flag that
states it was initializied but the flag is checked again after the mutex
has been taken. Checking first outside the mutex allows it to shortcut
having to take the mutex. But then the check needs to be done again after
the mute is taken in case of races.

Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260902095501.6b59af20@gandalf.local.home
Fixes: f04f24fb7e48d ("ftrace, kprobes: Fix a deadlock on ftrace_regex_lock")
Reported-by: sashiko-bot@kernel.org
Close: https://lore.kernel.org/all/20260829025528.49A831F000E9@smtp.kernel.org/
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

1 files changed, 275 insertions, 0 deletions

diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
new file mode 100644
index 000000000..fecc7d7e2
--- /dev/null
+++ b/drivers/usb/chipidea/otg.c
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * otg.c - ChipIdea USB IP core OTG driver
+ *
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Peter Chen
+ */
+
+/*
+ * This file mainly handles otgsc register, OTG fsm operations for HNP and SRP
+ * are also included.
+ */
+
+#include <linux/usb/otg.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/chipidea.h>
+
+#include "ci.h"
+#include "bits.h"
+#include "otg.h"
+#include "otg_fsm.h"
+
+/**
+ * hw_read_otgsc - returns otgsc register bits value.
+ * @ci: the controller
+ * @mask: bitfield mask
+ */
+u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask)
+{
+	struct ci_hdrc_cable *cable;
+	u32 val = hw_read(ci, OP_OTGSC, mask);
+
+	/*
+	 * If using extcon framework for VBUS and/or ID signal
+	 * detection overwrite OTGSC register value
+	 */
+	cable = &ci->platdata->vbus_extcon;
+	if (!IS_ERR(cable->edev) || ci->role_switch) {
+		if (cable->changed)
+			val |= OTGSC_BSVIS;
+		else
+			val &= ~OTGSC_BSVIS;
+
+		if (cable->connected)
+			val |= OTGSC_BSV;
+		else
+			val &= ~OTGSC_BSV;
+
+		if (cable->enabled)
+			val |= OTGSC_BSVIE;
+		else
+			val &= ~OTGSC_BSVIE;
+	}
+
+	cable = &ci->platdata->id_extcon;
+	if (!IS_ERR(cable->edev) || ci->role_switch) {
+		if (cable->changed)
+			val |= OTGSC_IDIS;
+		else
+			val &= ~OTGSC_IDIS;
+
+		if (cable->connected)
+			val &= ~OTGSC_ID; /* host */
+		else
+			val |= OTGSC_ID; /* device */
+
+		if (cable->enabled)
+			val |= OTGSC_IDIE;
+		else
+			val &= ~OTGSC_IDIE;
+	}
+
+	return val & mask;
+}
+
+/**
+ * hw_write_otgsc - updates target bits of OTGSC register.
+ * @ci: the controller
+ * @mask: bitfield mask
+ * @data: to be written
+ */
+void hw_write_otgsc(struct ci_hdrc *ci, u32 mask, u32 data)
+{
+	struct ci_hdrc_cable *cable;
+
+	cable = &ci->platdata->vbus_extcon;
+	if (!IS_ERR(cable->edev) || ci->role_switch) {
+		if (data & mask & OTGSC_BSVIS)
+			cable->changed = false;
+
+		/* Don't enable vbus interrupt if using external notifier */
+		if (data & mask & OTGSC_BSVIE) {
+			cable->enabled = true;
+			data &= ~OTGSC_BSVIE;
+		} else if (mask & OTGSC_BSVIE) {
+			cable->enabled = false;
+		}
+	}
+
+	cable = &ci->platdata->id_extcon;
+	if (!IS_ERR(cable->edev) || ci->role_switch) {
+		if (data & mask & OTGSC_IDIS)
+			cable->changed = false;
+
+		/* Don't enable id interrupt if using external notifier */
+		if (data & mask & OTGSC_IDIE) {
+			cable->enabled = true;
+			data &= ~OTGSC_IDIE;
+		} else if (mask & OTGSC_IDIE) {
+			cable->enabled = false;
+		}
+	}
+
+	hw_write(ci, OP_OTGSC, mask | OTGSC_INT_STATUS_BITS, data);
+}
+
+/**
+ * ci_otg_role - pick role based on ID pin state
+ * @ci: the controller
+ */
+enum ci_role ci_otg_role(struct ci_hdrc *ci)
+{
+	enum ci_role role = hw_read_otgsc(ci, OTGSC_ID)
+		? CI_ROLE_GADGET
+		: CI_ROLE_HOST;
+
+	return role;
+}
+
+void ci_handle_vbus_change(struct ci_hdrc *ci)
+{
+	if (ci->role != CI_ROLE_GADGET)
+		return;
+
+	if (!ci->is_otg) {
+		if (ci->platdata->flags & CI_HDRC_FORCE_VBUS_ACTIVE_ALWAYS)
+			usb_gadget_vbus_connect(&ci->gadget);
+		return;
+	}
+
+	if (hw_read_otgsc(ci, OTGSC_BSV) && !ci->vbus_active)
+		usb_gadget_vbus_connect(&ci->gadget);
+	else if (!hw_read_otgsc(ci, OTGSC_BSV) && ci->vbus_active)
+		usb_gadget_vbus_disconnect(&ci->gadget);
+}
+
+/**
+ * hw_wait_vbus_lower_bsv - When we switch to device mode, the vbus value
+ *                          should be lower than OTGSC_BSV before connecting
+ *                          to host.
+ *
+ * @ci: the controller
+ *
+ * This function returns an error code if timeout
+ */
+static int hw_wait_vbus_lower_bsv(struct ci_hdrc *ci)
+{
+	unsigned long elapse = jiffies + msecs_to_jiffies(5000);
+	u32 mask = OTGSC_BSV;
+
+	while (hw_read_otgsc(ci, mask)) {
+		if (time_after(jiffies, elapse)) {
+			dev_err(ci->dev, "timeout waiting for %08x in OTGSC\n",
+					mask);
+			return -ETIMEDOUT;
+		}
+		msleep(20);
+	}
+
+	return 0;
+}
+
+void ci_handle_id_switch(struct ci_hdrc *ci)
+{
+	enum ci_role role;
+
+	mutex_lock(&ci->mutex);
+	role = ci_otg_role(ci);
+	if (role != ci->role) {
+		dev_dbg(ci->dev, "switching from %s to %s\n",
+			ci_role(ci)->name, ci->roles[role]->name);
+
+		if (ci->vbus_active && ci->role == CI_ROLE_GADGET)
+			/*
+			 * vbus disconnect event is lost due to role
+			 * switch occurs during system suspend.
+			 */
+			usb_gadget_vbus_disconnect(&ci->gadget);
+
+		ci_role_stop(ci);
+
+		if (role == CI_ROLE_GADGET && !ci->role_switch &&
+		    IS_ERR(ci->platdata->vbus_extcon.edev))
+			/*
+			 * Wait vbus lower than OTGSC_BSV before connecting
+			 * to host. If connecting status is from an external
+			 * connector instead of register, we don't need to
+			 * care vbus on the board, since it will not affect
+			 * external connector status.
+			 */
+			hw_wait_vbus_lower_bsv(ci);
+
+		ci_role_start(ci, role);
+		/* vbus change may have already occurred */
+		if (role == CI_ROLE_GADGET)
+			ci_handle_vbus_change(ci);
+	}
+	mutex_unlock(&ci->mutex);
+}
+/**
+ * ci_otg_work - perform otg (vbus/id) event handle
+ * @work: work struct
+ */
+static void ci_otg_work(struct work_struct *work)
+{
+	struct ci_hdrc *ci = container_of(work, struct ci_hdrc, work);
+
+	if (ci_otg_is_fsm_mode(ci) && !ci_otg_fsm_work(ci)) {
+		enable_irq(ci->irq);
+		return;
+	}
+
+	pm_runtime_get_sync(ci->dev);
+
+	if (ci->id_event) {
+		ci->id_event = false;
+		ci_handle_id_switch(ci);
+	}
+
+	if (ci->b_sess_valid_event) {
+		ci->b_sess_valid_event = false;
+		ci_handle_vbus_change(ci);
+	}
+
+	pm_runtime_put_sync(ci->dev);
+
+	enable_irq(ci->irq);
+}
+
+
+/**
+ * ci_hdrc_otg_init - initialize otg struct
+ * @ci: the controller
+ */
+int ci_hdrc_otg_init(struct ci_hdrc *ci)
+{
+	INIT_WORK(&ci->work, ci_otg_work);
+	ci->wq = create_freezable_workqueue("ci_otg");
+	if (!ci->wq) {
+		dev_err(ci->dev, "can't create workqueue\n");
+		return -ENODEV;
+	}
+
+	if (ci_otg_is_fsm_mode(ci))
+		return ci_hdrc_otg_fsm_init(ci);
+
+	return 0;
+}
+
+/**
+ * ci_hdrc_otg_destroy - destroy otg struct
+ * @ci: the controller
+ */
+void ci_hdrc_otg_destroy(struct ci_hdrc *ci)
+{
+	if (ci->wq)
+		destroy_workqueue(ci->wq);
+
+	/* Disable all OTG irq and clear status */
+	hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS,
+						OTGSC_INT_STATUS_BITS);
+	if (ci_otg_is_fsm_mode(ci))
+		ci_hdrc_otg_fsm_remove(ci);
+}