arm64/boot: Disable trapping of PMZR_EL0 writes to EL2grafted

__init_el2_fgt2() writes one mask to both HDFGRTR2_EL2 and HDFGWTR2_EL2.
PMZR_EL0 is write-only, so its trap bit, nPMZR_EL0, exists only in
HDFGWTR2_EL2 and is therefore never set: a PMZR_EL0 write from the host
traps to EL2, where the nVHE hypervisor has no handler and BUG()s. The
kernel never writes PMZR_EL0, but kernel.perf_user_access=1 has the PMU
driver set PMUSERENR_EL0.UEN for a task with a user-read event, so a
write from EL0 reaches the trap and takes the host down without a panic
message.

Accumulate the HDFGWTR2_EL2 bits separately, as __init_el2_fgt() already
does for HDFGWTR_EL2, and set nPMZR_EL0 with the other FEAT_PMUv3p9
bits.

Fixes: 858c7bfcb35e1 ("arm64/boot: Enable EL2 requirements for FEAT_PMUv3p9")
Cc: stable@vger.kernel.org
Signed-off-by: Fuad Tabba <fuad.tabba@linux.dev>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>

1 files changed, 64 insertions, 0 deletions

diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
new file mode 100644
index 000000000..bab45bc62
--- /dev/null
+++ b/drivers/usb/chipidea/Kconfig
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config USB_CHIPIDEA
+	tristate "ChipIdea Highspeed Dual Role Controller"
+	depends on ((USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET)) && HAS_DMA
+	select EXTCON
+	select RESET_CONTROLLER
+	select USB_ULPI_BUS
+	select USB_ROLE_SWITCH
+	select USB_TEGRA_PHY if ARCH_TEGRA
+	help
+	  Say Y here if your system has a dual role high speed USB
+	  controller based on ChipIdea silicon IP. It supports:
+	  Dual-role switch (ID, OTG FSM, sysfs), Host-only, and
+	  Peripheral-only.
+
+	  When compiled dynamically, the module will be called ci_hdrc.ko.
+
+if USB_CHIPIDEA
+
+config USB_CHIPIDEA_UDC
+	bool "ChipIdea device controller"
+	depends on USB_GADGET
+	help
+	  Say Y here to enable device controller functionality of the
+	  ChipIdea driver.
+
+config USB_CHIPIDEA_HOST
+	bool "ChipIdea host controller"
+	depends on USB_EHCI_HCD
+	select USB_EHCI_ROOT_HUB_TT
+	help
+	  Say Y here to enable host controller functionality of the
+	  ChipIdea driver.
+
+config USB_CHIPIDEA_PCI
+	tristate "Enable PCI glue driver" if EXPERT
+	depends on USB_PCI
+	depends on NOP_USB_XCEIV
+	default USB_CHIPIDEA
+
+config USB_CHIPIDEA_MSM
+	tristate "Enable MSM hsusb glue driver" if EXPERT
+	default USB_CHIPIDEA
+
+config USB_CHIPIDEA_NPCM
+	tristate "Enable NPCM hsusb glue driver" if EXPERT
+	default USB_CHIPIDEA
+
+config USB_CHIPIDEA_IMX
+	tristate "Enable i.MX USB glue driver" if EXPERT
+	depends on OF
+	default USB_CHIPIDEA
+
+config USB_CHIPIDEA_GENERIC
+	tristate "Enable generic USB2 glue driver" if EXPERT
+	default USB_CHIPIDEA
+
+config USB_CHIPIDEA_TEGRA
+	tristate "Enable Tegra USB glue driver" if EXPERT
+	depends on OF
+	default USB_CHIPIDEA
+
+endif