Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

29 files changed, 19568 insertions, 0 deletions

diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
new file mode 100644
index 000000000..39ad23d1a
--- /dev/null
+++ b/drivers/usb/cdns3/Kconfig
@@ -0,0 +1,115 @@
+config USB_CDNS_SUPPORT
+	tristate "Cadence USB Support"
+	depends on USB_SUPPORT && HAS_DMA
+	depends on USB || USB_GADGET
+	depends on USB if !USB_GADGET
+	depends on USB_GADGET if !USB
+	select USB_XHCI_PLATFORM if USB_XHCI_HCD
+	select USB_ROLE_SWITCH
+	help
+	  Say Y here if your system has a Cadence USBSS or USBSSP
+	  dual-role controller.
+	  It supports: dual-role switch, Host-only, and Peripheral-only.
+
+if USB_CDNS_SUPPORT
+
+config USB_CDNS3
+	tristate "Cadence USB dual-role controller (USBSS and USBSSP)"
+	depends on USB_CDNS_SUPPORT
+	help
+	  Say Y or M here if your system has an on-chip Cadence USB
+	  dual-role controller. This covers both USBSS (USB 3.0) and
+	  USBSSP (SuperSpeed Plus) IP; the driver detects the variant at
+	  runtime.
+
+	  The core driver (core, DRD, generic platform binding for the
+	  "cdns,usb3" device tree compatible, optional host and gadget)
+	  builds as one module named cdns.ko when built as a loadable
+	  module.
+
+	  It supports: dual-role switch, Host-only, and Peripheral-only.
+
+if USB_CDNS3
+
+config USB_CDNS3_HOST
+	bool "Cadence USB host controller (xHCI)"
+	depends on USB=y || USB=USB_CDNS3
+	help
+	  Say Y here to enable host controller functionality for Cadence
+	  USBSS and USBSSP dual-role controllers.
+
+	  The host controller is xHCI compliant and uses the standard
+	  xHCI driver.
+
+config USB_CDNS3_GADGET
+	bool "Cadence USB device controller (USBSS and USBSSP)"
+	depends on USB_GADGET=y || USB_GADGET=USB_CDNS3
+	help
+	  Say Y here to include Cadence USB device (gadget) support for
+	  both USBSS (USB 3.0) and USBSSP (SuperSpeed Plus) IP in the
+	  cdns.ko module. The implementation is selected at runtime from
+	  the detected controller version.
+
+	  USBSS gadget supports FF, HS and SS mode (not LS or SSP).
+	  USBSSP gadget supports FF, HS, SS and SSP mode (not LS).
+
+comment "Platform glue driver support"
+
+config USB_CDNS3_PCI_WRAP
+	tristate "Cadence USB3 support on PCIe-based platforms"
+	depends on USB_PCI && ACPI
+	default USB_CDNS3
+	help
+	  If you're using the USBSS Core IP with a PCIe, please say
+	  'Y' or 'M' here.
+
+	  If you choose to build this driver as module it will
+	  be dynamically linked and module will be called cdns3-pci.ko
+
+config USB_CDNSP_PCI
+	tristate "Cadence USBSSP support on PCIe-based platforms"
+	depends on USB_PCI && ACPI
+	default USB_CDNS3
+	help
+	  If you're using the USBSSP Core IP with a PCIe, please say
+	  'Y' or 'M' here.
+
+	  If you choose to build this driver as module it will
+	  be dynamically linked and module will be called cdnsp-pci.ko
+
+config USB_CDNS3_TI
+	tristate "Cadence USB3 support on TI platforms"
+	depends on ARCH_K3 || COMPILE_TEST
+	default USB_CDNS3
+	help
+	  Say 'Y' or 'M' here if you are building for Texas Instruments
+	  platforms that contain Cadence USB3 controller core.
+
+	  e.g. J721e.
+
+config USB_CDNS3_IMX
+	tristate "Cadence USB3 support on NXP i.MX platforms"
+	depends on ARCH_MXC || COMPILE_TEST
+	default USB_CDNS3
+	help
+	  Say 'Y' or 'M' here if you are building for NXP i.MX
+	  platforms that contain Cadence USB3 controller core.
+
+	  For example, imx8qm and imx8qxp.
+
+config USB_CDNS3_STARFIVE
+	tristate "Cadence USB3 support on StarFive SoC platforms"
+	depends on ARCH_STARFIVE || COMPILE_TEST
+	default USB_CDNS3
+	help
+	  Say 'Y' or 'M' here if you are building for StarFive SoCs
+	  platforms that contain Cadence USB3 controller core.
+
+	  e.g. JH7110.
+
+	  If you choose to build this driver as module it will
+	  be dynamically linked and module will be called cdns3-starfive.ko
+
+endif # USB_CDNS3
+
+endif # USB_CDNS_SUPPORT
diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
new file mode 100644
index 000000000..b2e4ba6a4
--- /dev/null
+++ b/drivers/usb/cdns3/Makefile
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0
+# define_trace.h needs to know how to find our header
+CFLAGS_cdns3-trace.o				:= -I$(src)
+CFLAGS_cdnsp-trace.o				:= -I$(src)
+
+obj-$(CONFIG_USB_CDNS3)			+= cdns.o
+
+cdns-y					:= core.o drd.o cdns3-plat.o
+cdns-$(CONFIG_USB_CDNS3_HOST)		+= host.o
+
+ifneq ($(CONFIG_USB_CDNS3_GADGET),)
+cdns-y					+= cdns3-gadget.o cdns3-ep0.o \
+					   cdnsp-ring.o cdnsp-gadget.o \
+					   cdnsp-mem.o cdnsp-ep0.o
+endif
+
+ifneq ($(CONFIG_TRACING),)
+ifneq ($(CONFIG_USB_CDNS3_GADGET),)
+cdns-y					+= cdns3-trace.o cdnsp-trace.o
+endif
+endif
+
+##
+# Platform-specific glue layers (PCI wrappers, SoC integration)
+##
+obj-$(CONFIG_USB_CDNS3_PCI_WRAP)		+= cdns3-pci-wrap.o
+obj-$(CONFIG_USB_CDNSP_PCI)			+= cdnsp-pci.o
+obj-$(CONFIG_USB_CDNS3_TI)			+= cdns3-ti.o
+obj-$(CONFIG_USB_CDNS3_IMX)			+= cdns3-imx.o
+obj-$(CONFIG_USB_CDNS3_STARFIVE)		+= cdns3-starfive.o
diff --git a/drivers/usb/cdns3/cdns3-debug.h b/drivers/usb/cdns3/cdns3-debug.h
new file mode 100644
index 000000000..4618cfe85
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-debug.h
@@ -0,0 +1,157 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Cadence USBSS DRD Driver.
+ * Debug header file.
+ *
+ * Copyright (C) 2018-2019 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ */
+#ifndef __LINUX_CDNS3_DEBUG
+#define __LINUX_CDNS3_DEBUG
+
+#include "core.h"
+
+static inline char *cdns3_decode_usb_irq(char *str,
+					 enum usb_device_speed speed,
+					 u32 usb_ists)
+{
+	int ret;
+
+	ret = sprintf(str, "IRQ %08x = ", usb_ists);
+
+	if (usb_ists & (USB_ISTS_CON2I | USB_ISTS_CONI)) {
+		ret += sprintf(str + ret, "Connection %s\n",
+			       usb_speed_string(speed));
+	}
+	if (usb_ists & USB_ISTS_DIS2I || usb_ists & USB_ISTS_DISI)
+		ret += sprintf(str + ret, "Disconnection ");
+	if (usb_ists & USB_ISTS_L2ENTI)
+		ret += sprintf(str + ret, "suspended ");
+	if (usb_ists & USB_ISTS_L1ENTI)
+		ret += sprintf(str + ret, "L1 enter ");
+	if (usb_ists & USB_ISTS_L1EXTI)
+		ret += sprintf(str + ret, "L1 exit ");
+	if (usb_ists & USB_ISTS_L2ENTI)
+		ret += sprintf(str + ret, "L2 enter ");
+	if (usb_ists & USB_ISTS_L2EXTI)
+		ret += sprintf(str + ret, "L2 exit ");
+	if (usb_ists & USB_ISTS_U3EXTI)
+		ret += sprintf(str + ret, "U3 exit ");
+	if (usb_ists & USB_ISTS_UWRESI)
+		ret += sprintf(str + ret, "Warm Reset ");
+	if (usb_ists & USB_ISTS_UHRESI)
+		ret += sprintf(str + ret, "Hot Reset ");
+	if (usb_ists & USB_ISTS_U2RESI)
+		ret += sprintf(str + ret, "Reset");
+
+	return str;
+}
+
+static inline  char *cdns3_decode_ep_irq(char *str,
+					 u32 ep_sts,
+					 const char *ep_name)
+{
+	int ret;
+
+	ret = sprintf(str, "IRQ for %s: %08x ", ep_name, ep_sts);
+
+	if (ep_sts & EP_STS_SETUP)
+		ret += sprintf(str + ret, "SETUP ");
+	if (ep_sts & EP_STS_IOC)
+		ret += sprintf(str + ret, "IOC ");
+	if (ep_sts & EP_STS_ISP)
+		ret += sprintf(str + ret, "ISP ");
+	if (ep_sts & EP_STS_DESCMIS)
+		ret += sprintf(str + ret, "DESCMIS ");
+	if (ep_sts & EP_STS_STREAMR)
+		ret += sprintf(str + ret, "STREAMR ");
+	if (ep_sts & EP_STS_MD_EXIT)
+		ret += sprintf(str + ret, "MD_EXIT ");
+	if (ep_sts & EP_STS_TRBERR)
+		ret += sprintf(str + ret, "TRBERR ");
+	if (ep_sts & EP_STS_NRDY)
+		ret += sprintf(str + ret, "NRDY ");
+	if (ep_sts & EP_STS_PRIME)
+		ret += sprintf(str + ret, "PRIME ");
+	if (ep_sts & EP_STS_SIDERR)
+		ret += sprintf(str + ret, "SIDERRT ");
+	if (ep_sts & EP_STS_OUTSMM)
+		ret += sprintf(str + ret, "OUTSMM ");
+	if (ep_sts & EP_STS_ISOERR)
+		ret += sprintf(str + ret, "ISOERR ");
+	if (ep_sts & EP_STS_IOT)
+		ret += sprintf(str + ret, "IOT ");
+
+	return str;
+}
+
+static inline char *cdns3_decode_epx_irq(char *str,
+					 char *ep_name,
+					 u32 ep_sts)
+{
+	return cdns3_decode_ep_irq(str, ep_sts, ep_name);
+}
+
+static inline char *cdns3_decode_ep0_irq(char *str,
+					 int dir,
+					 u32 ep_sts)
+{
+	return cdns3_decode_ep_irq(str, ep_sts,
+				   dir ? "ep0IN" : "ep0OUT");
+}
+
+/**
+ * Debug a transfer ring.
+ *
+ * Prints out all TRBs in the endpoint ring, even those after the Link TRB.
+ *.
+ */
+static inline char *cdns3_dbg_ring(struct cdns3_endpoint *priv_ep, char *str)
+{
+	dma_addr_t addr = priv_ep->trb_pool_dma;
+	struct cdns3_trb *trb;
+	int trb_per_sector;
+	int ret = 0;
+	int i;
+
+	trb_per_sector = GET_TRBS_PER_SEGMENT(priv_ep->type);
+
+	trb = &priv_ep->trb_pool[priv_ep->dequeue];
+	ret += sprintf(str + ret, "\n\t\tRing contents for %s:", priv_ep->name);
+
+	ret += sprintf(str + ret,
+		       "\n\t\tRing deq index: %d, trb: %p (virt), 0x%llx (dma)\n",
+		       priv_ep->dequeue, trb,
+		       (unsigned long long)cdns3_trb_virt_to_dma(priv_ep, trb));
+
+	trb = &priv_ep->trb_pool[priv_ep->enqueue];
+	ret += sprintf(str + ret,
+		       "\t\tRing enq index: %d, trb: %p (virt), 0x%llx (dma)\n",
+		       priv_ep->enqueue, trb,
+		       (unsigned long long)cdns3_trb_virt_to_dma(priv_ep, trb));
+
+	ret += sprintf(str + ret,
+		       "\t\tfree trbs: %d, CCS=%d, PCS=%d\n",
+		       priv_ep->free_trbs, priv_ep->ccs, priv_ep->pcs);
+
+	if (trb_per_sector > TRBS_PER_SEGMENT) {
+		sprintf(str + ret, "\t\tTransfer ring %d too big\n",
+			trb_per_sector);
+		return str;
+	}
+
+	for (i = 0; i < trb_per_sector; ++i) {
+		trb = &priv_ep->trb_pool[i];
+		ret += sprintf(str + ret,
+			"\t\t@%pad %08x %08x %08x\n", &addr,
+			le32_to_cpu(trb->buffer),
+			le32_to_cpu(trb->length),
+			le32_to_cpu(trb->control));
+		addr += sizeof(*trb);
+	}
+
+	return str;
+}
+
+#endif /*__LINUX_CDNS3_DEBUG*/
diff --git a/drivers/usb/cdns3/cdns3-ep0.c b/drivers/usb/cdns3/cdns3-ep0.c
new file mode 100644
index 000000000..e29989d57
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-ep0.c
@@ -0,0 +1,895 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence USBSS DRD Driver - gadget side.
+ *
+ * Copyright (C) 2018 Cadence Design Systems.
+ * Copyright (C) 2017-2018 NXP
+ *
+ * Authors: Pawel Jez <pjez@cadence.com>,
+ *          Pawel Laszczak <pawell@cadence.com>
+ *          Peter Chen <peter.chen@nxp.com>
+ */
+
+#include <linux/usb/composite.h>
+#include <linux/iopoll.h>
+
+#include "cdns3-gadget.h"
+#include "cdns3-trace.h"
+
+static struct usb_endpoint_descriptor cdns3_gadget_ep0_desc = {
+	.bLength = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+	.bmAttributes =	USB_ENDPOINT_XFER_CONTROL,
+};
+
+/**
+ * cdns3_ep0_run_transfer - Do transfer on default endpoint hardware
+ * @priv_dev: extended gadget object
+ * @dma_addr: physical address where data is/will be stored
+ * @length: data length
+ * @erdy: set it to 1 when ERDY packet should be sent -
+ *        exit from flow control state
+ * @zlp: add zero length packet
+ */
+static void cdns3_ep0_run_transfer(struct cdns3_device *priv_dev,
+				   dma_addr_t dma_addr,
+				   unsigned int length, int erdy, int zlp)
+{
+	struct cdns3_usb_regs __iomem *regs = priv_dev->regs;
+	struct cdns3_endpoint *priv_ep = priv_dev->eps[0];
+
+	priv_ep->trb_pool[0].buffer = cpu_to_le32(TRB_BUFFER(dma_addr));
+	priv_ep->trb_pool[0].length = cpu_to_le32(TRB_LEN(length));
+
+	if (zlp) {
+		priv_ep->trb_pool[0].control = cpu_to_le32(TRB_CYCLE | TRB_TYPE(TRB_NORMAL));
+		priv_ep->trb_pool[1].buffer = cpu_to_le32(TRB_BUFFER(dma_addr));
+		priv_ep->trb_pool[1].length = cpu_to_le32(TRB_LEN(0));
+		priv_ep->trb_pool[1].control = cpu_to_le32(TRB_CYCLE | TRB_IOC |
+		    TRB_TYPE(TRB_NORMAL));
+	} else {
+		priv_ep->trb_pool[0].control = cpu_to_le32(TRB_CYCLE | TRB_IOC |
+		    TRB_TYPE(TRB_NORMAL));
+		priv_ep->trb_pool[1].control = 0;
+	}
+
+	trace_cdns3_prepare_trb(priv_ep, priv_ep->trb_pool);
+
+	cdns3_select_ep(priv_dev, priv_dev->ep0_data_dir);
+
+	writel(EP_STS_TRBERR, &regs->ep_sts);
+	writel(EP_TRADDR_TRADDR(priv_ep->trb_pool_dma), &regs->ep_traddr);
+	trace_cdns3_doorbell_ep0(priv_dev->ep0_data_dir ? "ep0in" : "ep0out",
+				 readl(&regs->ep_traddr));
+
+	/* TRB should be prepared before starting transfer. */
+	writel(EP_CMD_DRDY, &regs->ep_cmd);
+
+	/* Resume controller before arming transfer. */
+	__cdns3_gadget_wakeup(priv_dev);
+
+	if (erdy)
+		writel(EP_CMD_ERDY, &priv_dev->regs->ep_cmd);
+}
+
+/**
+ * cdns3_ep0_delegate_req - Returns status of handling setup packet
+ * Setup is handled by gadget driver
+ * @priv_dev: extended gadget object
+ * @ctrl_req: pointer to received setup packet
+ *
+ * Returns zero on success or negative value on failure
+ */
+static int cdns3_ep0_delegate_req(struct cdns3_device *priv_dev,
+				  struct usb_ctrlrequest *ctrl_req)
+{
+	int ret;
+
+	spin_unlock(&priv_dev->lock);
+	priv_dev->setup_pending = 1;
+	ret = priv_dev->gadget_driver->setup(&priv_dev->gadget, ctrl_req);
+	priv_dev->setup_pending = 0;
+	spin_lock(&priv_dev->lock);
+	return ret;
+}
+
+static void cdns3_prepare_setup_packet(struct cdns3_device *priv_dev)
+{
+	priv_dev->ep0_data_dir = 0;
+	priv_dev->ep0_stage = CDNS3_SETUP_STAGE;
+	cdns3_ep0_run_transfer(priv_dev, priv_dev->setup_dma,
+			       sizeof(struct usb_ctrlrequest), 0, 0);
+}
+
+static void cdns3_ep0_complete_setup(struct cdns3_device *priv_dev,
+				     u8 send_stall, u8 send_erdy)
+{
+	struct cdns3_endpoint *priv_ep = priv_dev->eps[0];
+	struct usb_request *request;
+
+	request = cdns3_next_request(&priv_ep->pending_req_list);
+	if (request)
+		list_del_init(&request->list);
+
+	if (send_stall) {
+		trace_cdns3_halt(priv_ep, send_stall, 0);
+		/* set_stall on ep0 */
+		cdns3_select_ep(priv_dev, 0x00);
+		writel(EP_CMD_SSTALL, &priv_dev->regs->ep_cmd);
+	} else {
+		cdns3_prepare_setup_packet(priv_dev);
+	}
+
+	priv_dev->ep0_stage = CDNS3_SETUP_STAGE;
+	writel((send_erdy ? EP_CMD_ERDY : 0) | EP_CMD_REQ_CMPL,
+	       &priv_dev->regs->ep_cmd);
+}
+
+/**
+ * cdns3_req_ep0_set_configuration - Handling of SET_CONFIG standard USB request
+ * @priv_dev: extended gadget object
+ * @ctrl_req: pointer to received setup packet
+ *
+ * Returns 0 if success, USB_GADGET_DELAYED_STATUS on deferred status stage,
+ * error code on error
+ */
+static int cdns3_req_ep0_set_configuration(struct cdns3_device *priv_dev,
+					   struct usb_ctrlrequest *ctrl_req)
+{
+	enum usb_device_state device_state = priv_dev->gadget.state;
+	u32 config = le16_to_cpu(ctrl_req->wValue);
+	int result = 0;
+
+	switch (device_state) {
+	case USB_STATE_ADDRESS:
+		result = cdns3_ep0_delegate_req(priv_dev, ctrl_req);
+
+		if (result || !config)
+			goto reset_config;
+
+		break;
+	case USB_STATE_CONFIGURED:
+		result = cdns3_ep0_delegate_req(priv_dev, ctrl_req);
+		if (!config && !result)
+			goto reset_config;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+
+reset_config:
+	if (result != USB_GADGET_DELAYED_STATUS)
+		cdns3_hw_reset_eps_config(priv_dev);
+
+	usb_gadget_set_state(&priv_dev->gadget,
+			     USB_STATE_ADDRESS);
+
+	return result;
+}
+
+/**
+ * cdns3_req_ep0_set_address - Handling of SET_ADDRESS standard USB request
+ * @priv_dev: extended gadget object
+ * @ctrl_req: pointer to received setup packet
+ *
+ * Returns 0 if success, error code on error
+ */
+static int cdns3_req_ep0_set_address(struct cdns3_device *priv_dev,
+				     struct usb_ctrlrequest *ctrl_req)
+{
+	enum usb_device_state device_state = priv_dev->gadget.state;
+	u32 reg;
+	u32 addr;
+
+	addr = le16_to_cpu(ctrl_req->wValue);
+
+	if (addr > USB_DEVICE_MAX_ADDRESS) {
+		dev_err(priv_dev->dev,
+			"Device address (%d) cannot be greater than %d\n",
+			addr, USB_DEVICE_MAX_ADDRESS);
+		return -EINVAL;
+	}
+
+	if (device_state == USB_STATE_CONFIGURED) {
+		dev_err(priv_dev->dev,
+			"can't set_address from configured state\n");
+		return -EINVAL;
+	}
+
+	reg = readl(&priv_dev->regs->usb_cmd);
+
+	writel(reg | USB_CMD_FADDR(addr) | USB_CMD_SET_ADDR,
+	       &priv_dev->regs->usb_cmd);
+
+	usb_gadget_set_state(&priv_dev->gadget,
+			     (addr ? USB_STATE_ADDRESS : USB_STATE_DEFAULT));
+
+	return 0;
+}
+
+/**
+ * cdns3_req_ep0_get_status - Handling of GET_STATUS standard USB request
+ * @priv_dev: extended gadget object
+ * @ctrl: pointer to received setup packet
+ *
+ * Returns 0 if success, error code on error
+ */
+static int cdns3_req_ep0_get_status(struct cdns3_device *priv_dev,
+				    struct usb_ctrlrequest *ctrl)
+{
+	struct cdns3_endpoint *priv_ep;
+	__le16 *response_pkt;
+	u16 usb_status = 0;
+	u32 recip;
+	u8 index;
+
+	recip = ctrl->bRequestType & USB_RECIP_MASK;
+
+	switch (recip) {
+	case USB_RECIP_DEVICE:
+		/* self powered */
+		if (priv_dev->is_selfpowered)
+			usb_status = BIT(USB_DEVICE_SELF_POWERED);
+
+		if (priv_dev->wake_up_flag)
+			usb_status |= BIT(USB_DEVICE_REMOTE_WAKEUP);
+
+		if (priv_dev->gadget.speed != USB_SPEED_SUPER)
+			break;
+
+		if (priv_dev->u1_allowed)
+			usb_status |= BIT(USB_DEV_STAT_U1_ENABLED);
+
+		if (priv_dev->u2_allowed)
+			usb_status |= BIT(USB_DEV_STAT_U2_ENABLED);
+
+		break;
+	case USB_RECIP_INTERFACE:
+		return cdns3_ep0_delegate_req(priv_dev, ctrl);
+	case USB_RECIP_ENDPOINT:
+		index = cdns3_ep_addr_to_index(le16_to_cpu(ctrl->wIndex));
+		priv_ep = priv_dev->eps[index];
+
+		/* check if endpoint is stalled or stall is pending */
+		cdns3_select_ep(priv_dev, le16_to_cpu(ctrl->wIndex));
+		if (EP_STS_STALL(readl(&priv_dev->regs->ep_sts)) ||
+		    (priv_ep->flags & EP_STALL_PENDING))
+			usb_status =  BIT(USB_ENDPOINT_HALT);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	response_pkt = (__le16 *)priv_dev->setup_buf;
+	*response_pkt = cpu_to_le16(usb_status);
+
+	cdns3_ep0_run_transfer(priv_dev, priv_dev->setup_dma,
+			       sizeof(*response_pkt), 1, 0);
+	return 0;
+}
+
+static int cdns3_ep0_feature_handle_device(struct cdns3_device *priv_dev,
+					   struct usb_ctrlrequest *ctrl,
+					   int set)
+{
+	enum usb_device_state state;
+	enum usb_device_speed speed;
+	int ret = 0;
+	u32 wValue;
+	u16 tmode;
+
+	wValue = le16_to_cpu(ctrl->wValue);
+	state = priv_dev->gadget.state;
+	speed = priv_dev->gadget.speed;
+
+	switch (wValue) {
+	case USB_DEVICE_REMOTE_WAKEUP:
+		priv_dev->wake_up_flag = !!set;
+		break;
+	case USB_DEVICE_U1_ENABLE:
+		if (state != USB_STATE_CONFIGURED || speed != USB_SPEED_SUPER)
+			return -EINVAL;
+
+		priv_dev->u1_allowed = !!set;
+		break;
+	case USB_DEVICE_U2_ENABLE:
+		if (state != USB_STATE_CONFIGURED || speed != USB_SPEED_SUPER)
+			return -EINVAL;
+
+		priv_dev->u2_allowed = !!set;
+		break;
+	case USB_DEVICE_LTM_ENABLE:
+		ret = -EINVAL;
+		break;
+	case USB_DEVICE_TEST_MODE:
+		if (state != USB_STATE_CONFIGURED || speed > USB_SPEED_HIGH)
+			return -EINVAL;
+
+		tmode = le16_to_cpu(ctrl->wIndex);
+
+		if (!set || (tmode & 0xff) != 0)
+			return -EINVAL;
+
+		tmode >>= 8;
+		switch (tmode) {
+		case USB_TEST_J:
+		case USB_TEST_K:
+		case USB_TEST_SE0_NAK:
+		case USB_TEST_PACKET:
+			cdns3_set_register_bit(&priv_dev->regs->usb_cmd,
+					       USB_CMD_STMODE |
+					       USB_STS_TMODE_SEL(tmode - 1));
+			break;
+		default:
+			ret = -EINVAL;
+		}
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int cdns3_ep0_feature_handle_intf(struct cdns3_device *priv_dev,
+					 struct usb_ctrlrequest *ctrl,
+					 int set)
+{
+	u32 wValue;
+	int ret = 0;
+
+	wValue = le16_to_cpu(ctrl->wValue);
+
+	switch (wValue) {
+	case USB_INTRF_FUNC_SUSPEND:
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int cdns3_ep0_feature_handle_endpoint(struct cdns3_device *priv_dev,
+					     struct usb_ctrlrequest *ctrl,
+					     int set)
+{
+	struct cdns3_endpoint *priv_ep;
+	int ret = 0;
+	u8 index;
+
+	if (le16_to_cpu(ctrl->wValue) != USB_ENDPOINT_HALT)
+		return -EINVAL;
+
+	if (!(le16_to_cpu(ctrl->wIndex) & ~USB_DIR_IN))
+		return 0;
+
+	index = cdns3_ep_addr_to_index(le16_to_cpu(ctrl->wIndex));
+	priv_ep = priv_dev->eps[index];
+
+	cdns3_select_ep(priv_dev, le16_to_cpu(ctrl->wIndex));
+
+	if (set)
+		__cdns3_gadget_ep_set_halt(priv_ep);
+	else if (!(priv_ep->flags & EP_WEDGE))
+		ret = __cdns3_gadget_ep_clear_halt(priv_ep);
+
+	cdns3_select_ep(priv_dev, 0x00);
+
+	return ret;
+}
+
+/**
+ * cdns3_req_ep0_handle_feature -
+ * Handling of GET/SET_FEATURE standard USB request
+ *
+ * @priv_dev: extended gadget object
+ * @ctrl: pointer to received setup packet
+ * @set: must be set to 1 for SET_FEATURE request
+ *
+ * Returns 0 if success, error code on error
+ */
+static int cdns3_req_ep0_handle_feature(struct cdns3_device *priv_dev,
+					struct usb_ctrlrequest *ctrl,
+					int set)
+{
+	int ret = 0;
+	u32 recip;
+
+	recip = ctrl->bRequestType & USB_RECIP_MASK;
+
+	switch (recip) {
+	case USB_RECIP_DEVICE:
+		ret = cdns3_ep0_feature_handle_device(priv_dev, ctrl, set);
+		break;
+	case USB_RECIP_INTERFACE:
+		ret = cdns3_ep0_feature_handle_intf(priv_dev, ctrl, set);
+		break;
+	case USB_RECIP_ENDPOINT:
+		ret = cdns3_ep0_feature_handle_endpoint(priv_dev, ctrl, set);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+/**
+ * cdns3_req_ep0_set_sel - Handling of SET_SEL standard USB request
+ * @priv_dev: extended gadget object
+ * @ctrl_req: pointer to received setup packet
+ *
+ * Returns 0 if success, error code on error
+ */
+static int cdns3_req_ep0_set_sel(struct cdns3_device *priv_dev,
+				 struct usb_ctrlrequest *ctrl_req)
+{
+	if (priv_dev->gadget.state < USB_STATE_ADDRESS)
+		return -EINVAL;
+
+	if (le16_to_cpu(ctrl_req->wLength) != 6) {
+		dev_err(priv_dev->dev, "Set SEL should be 6 bytes, got %d\n",
+			ctrl_req->wLength);
+		return -EINVAL;
+	}
+
+	cdns3_ep0_run_transfer(priv_dev, priv_dev->setup_dma, 6, 1, 0);
+	return 0;
+}
+
+/**
+ * cdns3_req_ep0_set_isoch_delay -
+ * Handling of GET_ISOCH_DELAY standard USB request
+ * @priv_dev: extended gadget object
+ * @ctrl_req: pointer to received setup packet
+ *
+ * Returns 0 if success, error code on error
+ */
+static int cdns3_req_ep0_set_isoch_delay(struct cdns3_device *priv_dev,
+					 struct usb_ctrlrequest *ctrl_req)
+{
+	if (ctrl_req->wIndex || ctrl_req->wLength)
+		return -EINVAL;
+
+	priv_dev->isoch_delay = le16_to_cpu(ctrl_req->wValue);
+
+	return 0;
+}
+
+/**
+ * cdns3_ep0_standard_request - Handling standard USB requests
+ * @priv_dev: extended gadget object
+ * @ctrl_req: pointer to received setup packet
+ *
+ * Returns 0 if success, error code on error
+ */
+static int cdns3_ep0_standard_request(struct cdns3_device *priv_dev,
+				      struct usb_ctrlrequest *ctrl_req)
+{
+	int ret;
+
+	switch (ctrl_req->bRequest) {
+	case USB_REQ_SET_ADDRESS:
+		ret = cdns3_req_ep0_set_address(priv_dev, ctrl_req);
+		break;
+	case USB_REQ_SET_CONFIGURATION:
+		ret = cdns3_req_ep0_set_configuration(priv_dev, ctrl_req);
+		break;
+	case USB_REQ_GET_STATUS:
+		ret = cdns3_req_ep0_get_status(priv_dev, ctrl_req);
+		break;
+	case USB_REQ_CLEAR_FEATURE:
+		ret = cdns3_req_ep0_handle_feature(priv_dev, ctrl_req, 0);
+		break;
+	case USB_REQ_SET_FEATURE:
+		ret = cdns3_req_ep0_handle_feature(priv_dev, ctrl_req, 1);
+		break;
+	case USB_REQ_SET_SEL:
+		ret = cdns3_req_ep0_set_sel(priv_dev, ctrl_req);
+		break;
+	case USB_REQ_SET_ISOCH_DELAY:
+		ret = cdns3_req_ep0_set_isoch_delay(priv_dev, ctrl_req);
+		break;
+	default:
+		ret = cdns3_ep0_delegate_req(priv_dev, ctrl_req);
+		break;
+	}
+
+	return ret;
+}
+
+static void __pending_setup_status_handler(struct cdns3_device *priv_dev)
+{
+	struct usb_request *request = priv_dev->pending_status_request;
+
+	if (priv_dev->status_completion_no_call && request &&
+	    request->complete) {
+		request->complete(&priv_dev->eps[0]->endpoint, request);
+		priv_dev->status_completion_no_call = 0;
+	}
+}
+
+void cdns3_pending_setup_status_handler(struct work_struct *work)
+{
+	struct cdns3_device *priv_dev = container_of(work, struct cdns3_device,
+			pending_status_wq);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv_dev->lock, flags);
+	__pending_setup_status_handler(priv_dev);
+	spin_unlock_irqrestore(&priv_dev->lock, flags);
+}
+
+/**
+ * cdns3_ep0_setup_phase - Handling setup USB requests
+ * @priv_dev: extended gadget object
+ */
+static void cdns3_ep0_setup_phase(struct cdns3_device *priv_dev)
+{
+	struct usb_ctrlrequest *ctrl = priv_dev->setup_buf;
+	struct cdns3_endpoint *priv_ep = priv_dev->eps[0];
+	int result;
+
+	priv_dev->ep0_data_dir = ctrl->bRequestType & USB_DIR_IN;
+
+	trace_cdns3_ctrl_req(ctrl);
+
+	if (!list_empty(&priv_ep->pending_req_list)) {
+		struct usb_request *request;
+
+		request = cdns3_next_request(&priv_ep->pending_req_list);
+		priv_ep->dir = priv_dev->ep0_data_dir;
+		cdns3_gadget_giveback(priv_ep, to_cdns3_request(request),
+				      -ECONNRESET);
+	}
+
+	if (le16_to_cpu(ctrl->wLength))
+		priv_dev->ep0_stage = CDNS3_DATA_STAGE;
+	else
+		priv_dev->ep0_stage = CDNS3_STATUS_STAGE;
+
+	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
+		result = cdns3_ep0_standard_request(priv_dev, ctrl);
+	else
+		result = cdns3_ep0_delegate_req(priv_dev, ctrl);
+
+	if (result == USB_GADGET_DELAYED_STATUS)
+		return;
+
+	if (result < 0)
+		cdns3_ep0_complete_setup(priv_dev, 1, 1);
+	else if (priv_dev->ep0_stage == CDNS3_STATUS_STAGE)
+		cdns3_ep0_complete_setup(priv_dev, 0, 1);
+}
+
+static void cdns3_transfer_completed(struct cdns3_device *priv_dev)
+{
+	struct cdns3_endpoint *priv_ep = priv_dev->eps[0];
+
+	if (!list_empty(&priv_ep->pending_req_list)) {
+		struct usb_request *request;
+
+		trace_cdns3_complete_trb(priv_ep, priv_ep->trb_pool);
+		request = cdns3_next_request(&priv_ep->pending_req_list);
+
+		request->actual =
+			TRB_LEN(le32_to_cpu(priv_ep->trb_pool->length));
+
+		priv_ep->dir = priv_dev->ep0_data_dir;
+		cdns3_gadget_giveback(priv_ep, to_cdns3_request(request), 0);
+	}
+
+	cdns3_ep0_complete_setup(priv_dev, 0, 0);
+}
+
+/**
+ * cdns3_check_new_setup - Check if controller receive new SETUP packet.
+ * @priv_dev: extended gadget object
+ *
+ * The SETUP packet can be kept in on-chip memory or in system memory.
+ */
+static bool cdns3_check_new_setup(struct cdns3_device *priv_dev)
+{
+	u32 ep_sts_reg;
+
+	cdns3_select_ep(priv_dev, USB_DIR_OUT);
+	ep_sts_reg = readl(&priv_dev->regs->ep_sts);
+
+	return !!(ep_sts_reg & (EP_STS_SETUP | EP_STS_STPWAIT));
+}
+
+/**
+ * cdns3_check_ep0_interrupt_proceed - Processes interrupt related to endpoint 0
+ * @priv_dev: extended gadget object
+ * @dir: USB_DIR_IN for IN direction, USB_DIR_OUT for OUT direction
+ */
+void cdns3_check_ep0_interrupt_proceed(struct cdns3_device *priv_dev, int dir)
+{
+	u32 ep_sts_reg;
+
+	cdns3_select_ep(priv_dev, dir);
+
+	ep_sts_reg = readl(&priv_dev->regs->ep_sts);
+	writel(ep_sts_reg, &priv_dev->regs->ep_sts);
+
+	trace_cdns3_ep0_irq(priv_dev, ep_sts_reg);
+
+	__pending_setup_status_handler(priv_dev);
+
+	if (ep_sts_reg & EP_STS_SETUP)
+		priv_dev->wait_for_setup = 1;
+
+	if (priv_dev->wait_for_setup && ep_sts_reg & EP_STS_IOC) {
+		priv_dev->wait_for_setup = 0;
+		cdns3_ep0_setup_phase(priv_dev);
+	} else if ((ep_sts_reg & EP_STS_IOC) || (ep_sts_reg & EP_STS_ISP)) {
+		priv_dev->ep0_data_dir = dir;
+		cdns3_transfer_completed(priv_dev);
+	}
+
+	if (ep_sts_reg & EP_STS_DESCMIS) {
+		if (dir == 0 && !priv_dev->setup_pending)
+			cdns3_prepare_setup_packet(priv_dev);
+	}
+}
+
+/**
+ * cdns3_gadget_ep0_enable
+ * @ep: pointer to endpoint zero object
+ * @desc: pointer to usb endpoint descriptor
+ *
+ * Function shouldn't be called by gadget driver,
+ * endpoint 0 is allways active
+ */
+static int cdns3_gadget_ep0_enable(struct usb_ep *ep,
+				   const struct usb_endpoint_descriptor *desc)
+{
+	return -EINVAL;
+}
+
+/**
+ * cdns3_gadget_ep0_disable
+ * @ep: pointer to endpoint zero object
+ *
+ * Function shouldn't be called by gadget driver,
+ * endpoint 0 is allways active
+ */
+static int cdns3_gadget_ep0_disable(struct usb_ep *ep)
+{
+	return -EINVAL;
+}
+
+/**
+ * cdns3_gadget_ep0_set_halt
+ * @ep: pointer to endpoint zero object
+ * @value: 1 for set stall, 0 for clear stall
+ *
+ * Returns 0
+ */
+static int cdns3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
+{
+	/* TODO */
+	return 0;
+}
+
+/**
+ * cdns3_gadget_ep0_queue - Transfer data on endpoint zero
+ * @ep: pointer to endpoint zero object
+ * @request: pointer to request object
+ * @gfp_flags: gfp flags
+ *
+ * Returns 0 on success, error code elsewhere
+ */
+static int cdns3_gadget_ep0_queue(struct usb_ep *ep,
+				  struct usb_request *request,
+				  gfp_t gfp_flags)
+{
+	struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+	unsigned long flags;
+	int ret = 0;
+	u8 zlp = 0;
+	int i;
+
+	spin_lock_irqsave(&priv_dev->lock, flags);
+	trace_cdns3_ep0_queue(priv_dev, request);
+
+	/* cancel the request if controller receive new SETUP packet. */
+	if (cdns3_check_new_setup(priv_dev)) {
+		spin_unlock_irqrestore(&priv_dev->lock, flags);
+		return -ECONNRESET;
+	}
+
+	/* send STATUS stage. Should be called only for SET_CONFIGURATION */
+	if (priv_dev->ep0_stage == CDNS3_STATUS_STAGE) {
+		u32 val;
+
+		cdns3_select_ep(priv_dev, 0x00);
+
+		/*
+		 * Configure all non-control EPs which are not enabled by class driver
+		 */
+		for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++) {
+			priv_ep = priv_dev->eps[i];
+			if (priv_ep && priv_ep->flags & EP_CLAIMED &&
+			    !(priv_ep->flags & EP_ENABLED))
+				cdns3_ep_config(priv_ep, 0);
+		}
+
+		cdns3_set_hw_configuration(priv_dev);
+		cdns3_ep0_complete_setup(priv_dev, 0, 1);
+		/* wait until configuration set */
+		ret = readl_poll_timeout_atomic(&priv_dev->regs->usb_sts, val,
+					  val & USB_STS_CFGSTS_MASK, 1, 100);
+		if (ret == -ETIMEDOUT)
+			dev_warn(priv_dev->dev, "timeout for waiting configuration set\n");
+
+		request->actual = 0;
+		priv_dev->status_completion_no_call = true;
+		priv_dev->pending_status_request = request;
+		usb_gadget_set_state(&priv_dev->gadget, USB_STATE_CONFIGURED);
+		spin_unlock_irqrestore(&priv_dev->lock, flags);
+
+		/*
+		 * Since there is no completion interrupt for status stage,
+		 * it needs to call ->completion in software after
+		 * ep0_queue is back.
+		 */
+		queue_work(system_freezable_wq, &priv_dev->pending_status_wq);
+		return ret;
+	}
+
+	if (!list_empty(&priv_ep->pending_req_list)) {
+		dev_err(priv_dev->dev,
+			"can't handle multiple requests for ep0\n");
+		spin_unlock_irqrestore(&priv_dev->lock, flags);
+		return -EBUSY;
+	}
+
+	ret = usb_gadget_map_request_by_dev(priv_dev->sysdev, request,
+					    priv_dev->ep0_data_dir);
+	if (ret) {
+		spin_unlock_irqrestore(&priv_dev->lock, flags);
+		dev_err(priv_dev->dev, "failed to map request\n");
+		return -EINVAL;
+	}
+
+	request->status = -EINPROGRESS;
+	list_add_tail(&request->list, &priv_ep->pending_req_list);
+
+	if (request->zero && request->length &&
+	    (request->length % ep->maxpacket == 0))
+		zlp = 1;
+
+	cdns3_ep0_run_transfer(priv_dev, request->dma, request->length, 1, zlp);
+
+	spin_unlock_irqrestore(&priv_dev->lock, flags);
+
+	return ret;
+}
+
+/**
+ * cdns3_gadget_ep_set_wedge - Set wedge on selected endpoint
+ * @ep: endpoint object
+ *
+ * Returns 0
+ */
+int cdns3_gadget_ep_set_wedge(struct usb_ep *ep)
+{
+	struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+
+	dev_dbg(priv_dev->dev, "Wedge for %s\n", ep->name);
+	cdns3_gadget_ep_set_halt(ep, 1);
+	priv_ep->flags |= EP_WEDGE;
+
+	return 0;
+}
+
+static const struct usb_ep_ops cdns3_gadget_ep0_ops = {
+	.enable = cdns3_gadget_ep0_enable,
+	.disable = cdns3_gadget_ep0_disable,
+	.alloc_request = cdns3_gadget_ep_alloc_request,
+	.free_request = cdns3_gadget_ep_free_request,
+	.queue = cdns3_gadget_ep0_queue,
+	.dequeue = cdns3_gadget_ep_dequeue,
+	.set_halt = cdns3_gadget_ep0_set_halt,
+	.set_wedge = cdns3_gadget_ep_set_wedge,
+};
+
+/**
+ * cdns3_ep0_config - Configures default endpoint
+ * @priv_dev: extended gadget object
+ *
+ * Functions sets parameters: maximal packet size and enables interrupts
+ */
+void cdns3_ep0_config(struct cdns3_device *priv_dev)
+{
+	struct cdns3_usb_regs __iomem *regs;
+	struct cdns3_endpoint *priv_ep;
+	u32 max_packet_size = 64;
+	u32 ep_cfg;
+
+	regs = priv_dev->regs;
+
+	if (priv_dev->gadget.speed == USB_SPEED_SUPER)
+		max_packet_size = 512;
+
+	priv_ep = priv_dev->eps[0];
+
+	if (!list_empty(&priv_ep->pending_req_list)) {
+		struct usb_request *request;
+
+		request = cdns3_next_request(&priv_ep->pending_req_list);
+		list_del_init(&request->list);
+	}
+
+	priv_dev->u1_allowed = 0;
+	priv_dev->u2_allowed = 0;
+
+	priv_dev->gadget.ep0->maxpacket = max_packet_size;
+	cdns3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(max_packet_size);
+
+	/* init ep out */
+	cdns3_select_ep(priv_dev, USB_DIR_OUT);
+
+	if (priv_dev->dev_ver >= DEV_VER_V3) {
+		cdns3_set_register_bit(&priv_dev->regs->dtrans,
+				       BIT(0) | BIT(16));
+		cdns3_set_register_bit(&priv_dev->regs->tdl_from_trb,
+				       BIT(0) | BIT(16));
+	}
+
+	ep_cfg = EP_CFG_ENABLE | EP_CFG_MAXPKTSIZE(max_packet_size);
+
+	if (!(priv_ep->flags & EP_CONFIGURED))
+		writel(ep_cfg, &regs->ep_cfg);
+
+	writel(EP_STS_EN_SETUPEN | EP_STS_EN_DESCMISEN | EP_STS_EN_TRBERREN,
+	       &regs->ep_sts_en);
+
+	/* init ep in */
+	cdns3_select_ep(priv_dev, USB_DIR_IN);
+
+	if (!(priv_ep->flags & EP_CONFIGURED))
+		writel(ep_cfg, &regs->ep_cfg);
+
+	priv_ep->flags |= EP_CONFIGURED;
+
+	writel(EP_STS_EN_SETUPEN | EP_STS_EN_TRBERREN, &regs->ep_sts_en);
+
+	cdns3_set_register_bit(&regs->usb_conf, USB_CONF_U1DS | USB_CONF_U2DS);
+}
+
+/**
+ * cdns3_init_ep0 - Initializes software endpoint 0 of gadget
+ * @priv_dev: extended gadget object
+ * @priv_ep: extended endpoint object
+ *
+ * Returns 0 on success else error code.
+ */
+int cdns3_init_ep0(struct cdns3_device *priv_dev,
+		   struct cdns3_endpoint *priv_ep)
+{
+	sprintf(priv_ep->name, "ep0");
+
+	/* fill linux fields */
+	priv_ep->endpoint.ops = &cdns3_gadget_ep0_ops;
+	priv_ep->endpoint.maxburst = 1;
+	usb_ep_set_maxpacket_limit(&priv_ep->endpoint,
+				   CDNS3_EP0_MAX_PACKET_LIMIT);
+	priv_ep->endpoint.address = 0;
+	priv_ep->endpoint.caps.type_control = 1;
+	priv_ep->endpoint.caps.dir_in = 1;
+	priv_ep->endpoint.caps.dir_out = 1;
+	priv_ep->endpoint.name = priv_ep->name;
+	priv_ep->endpoint.desc = &cdns3_gadget_ep0_desc;
+	priv_dev->gadget.ep0 = &priv_ep->endpoint;
+	priv_ep->type = USB_ENDPOINT_XFER_CONTROL;
+
+	return cdns3_allocate_trb_pool(priv_ep);
+}
diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c
new file mode 100644
index 000000000..42311c1bf
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-gadget.c
@@ -0,0 +1,3525 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence USBSS DRD Driver - gadget side.
+ *
+ * Copyright (C) 2018-2019 Cadence Design Systems.
+ * Copyright (C) 2017-2018 NXP
+ *
+ * Authors: Pawel Jez <pjez@cadence.com>,
+ *          Pawel Laszczak <pawell@cadence.com>
+ *          Peter Chen <peter.chen@nxp.com>
+ */
+
+/*
+ * Work around 1:
+ * At some situations, the controller may get stale data address in TRB
+ * at below sequences:
+ * 1. Controller read TRB includes data address
+ * 2. Software updates TRBs includes data address and Cycle bit
+ * 3. Controller read TRB which includes Cycle bit
+ * 4. DMA run with stale data address
+ *
+ * To fix this problem, driver needs to make the first TRB in TD as invalid.
+ * After preparing all TRBs driver needs to check the position of DMA and
+ * if the DMA point to the first just added TRB and doorbell is 1,
+ * then driver must defer making this TRB as valid. This TRB will be make
+ * as valid during adding next TRB only if DMA is stopped or at TRBERR
+ * interrupt.
+ *
+ * Issue has been fixed in DEV_VER_V3 version of controller.
+ *
+ * Work around 2:
+ * Controller for OUT endpoints has shared on-chip buffers for all incoming
+ * packets, including ep0out. It's FIFO buffer, so packets must be handle by DMA
+ * in correct order. If the first packet in the buffer will not be handled,
+ * then the following packets directed for other endpoints and  functions
+ * will be blocked.
+ * Additionally the packets directed to one endpoint can block entire on-chip
+ * buffers. In this case transfer to other endpoints also will blocked.
+ *
+ * To resolve this issue after raising the descriptor missing interrupt
+ * driver prepares internal usb_request object and use it to arm DMA transfer.
+ *
+ * The problematic situation was observed in case when endpoint has been enabled
+ * but no usb_request were queued. Driver try detects such endpoints and will
+ * use this workaround only for these endpoint.
+ *
+ * Driver use limited number of buffer. This number can be set by macro
+ * CDNS3_WA2_NUM_BUFFERS.
+ *
+ * Such blocking situation was observed on ACM gadget. For this function
+ * host send OUT data packet but ACM function is not prepared for this packet.
+ * It's cause that buffer placed in on chip memory block transfer to other
+ * endpoints.
+ *
+ * Issue has been fixed in DEV_VER_V2 version of controller.
+ *
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/usb/gadget.h>
+#include <linux/module.h>
+#include <linux/dmapool.h>
+#include <linux/iopoll.h>
+#include <linux/property.h>
+
+#include "core.h"
+#include "gadget-export.h"
+#include "cdns3-gadget.h"
+#include "cdns3-trace.h"
+#include "drd.h"
+
+static int __cdns3_gadget_ep_queue(struct usb_ep *ep,
+				   struct usb_request *request,
+				   gfp_t gfp_flags);
+
+static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
+				 struct usb_request *request);
+
+static int cdns3_ep_run_stream_transfer(struct cdns3_endpoint *priv_ep,
+					struct usb_request *request);
+
+/**
+ * cdns3_clear_register_bit - clear bit in given register.
+ * @ptr: address of device controller register to be read and changed
+ * @mask: bits requested to clar
+ */
+static void cdns3_clear_register_bit(void __iomem *ptr, u32 mask)
+{
+	mask = readl(ptr) & ~mask;
+	writel(mask, ptr);
+}
+
+/**
+ * cdns3_set_register_bit - set bit in given register.
+ * @ptr: address of device controller register to be read and changed
+ * @mask: bits requested to set
+ */
+void cdns3_set_register_bit(void __iomem *ptr, u32 mask)
+{
+	mask = readl(ptr) | mask;
+	writel(mask, ptr);
+}
+
+/**
+ * cdns3_ep_addr_to_index - Macro converts endpoint address to
+ * index of endpoint object in cdns3_device.eps[] container
+ * @ep_addr: endpoint address for which endpoint object is required
+ *
+ */
+u8 cdns3_ep_addr_to_index(u8 ep_addr)
+{
+	return (((ep_addr & 0x7F)) + ((ep_addr & USB_DIR_IN) ? 16 : 0));
+}
+
+static int cdns3_get_dma_pos(struct cdns3_device *priv_dev,
+			     struct cdns3_endpoint *priv_ep)
+{
+	int dma_index;
+
+	dma_index = readl(&priv_dev->regs->ep_traddr) - priv_ep->trb_pool_dma;
+
+	return dma_index / TRB_SIZE;
+}
+
+/**
+ * cdns3_next_request - returns next request from list
+ * @list: list containing requests
+ *
+ * Returns request or NULL if no requests in list
+ */
+struct usb_request *cdns3_next_request(struct list_head *list)
+{
+	return list_first_entry_or_null(list, struct usb_request, list);
+}
+
+/**
+ * cdns3_next_align_buf - returns next buffer from list
+ * @list: list containing buffers
+ *
+ * Returns buffer or NULL if no buffers in list
+ */
+static struct cdns3_aligned_buf *cdns3_next_align_buf(struct list_head *list)
+{
+	return list_first_entry_or_null(list, struct cdns3_aligned_buf, list);
+}
+
+/**
+ * cdns3_next_priv_request - returns next request from list
+ * @list: list containing requests
+ *
+ * Returns request or NULL if no requests in list
+ */
+static struct cdns3_request *cdns3_next_priv_request(struct list_head *list)
+{
+	return list_first_entry_or_null(list, struct cdns3_request, list);
+}
+
+/**
+ * cdns3_select_ep - selects endpoint
+ * @priv_dev:  extended gadget object
+ * @ep: endpoint address
+ */
+void cdns3_select_ep(struct cdns3_device *priv_dev, u32 ep)
+{
+	if (priv_dev->selected_ep == ep)
+		return;
+
+	priv_dev->selected_ep = ep;
+	writel(ep, &priv_dev->regs->ep_sel);
+}
+
+/**
+ * cdns3_get_tdl - gets current tdl for selected endpoint.
+ * @priv_dev:  extended gadget object
+ *
+ * Before calling this function the appropriate endpoint must
+ * be selected by means of cdns3_select_ep function.
+ */
+static int cdns3_get_tdl(struct cdns3_device *priv_dev)
+{
+	if (priv_dev->dev_ver < DEV_VER_V3)
+		return EP_CMD_TDL_GET(readl(&priv_dev->regs->ep_cmd));
+	else
+		return readl(&priv_dev->regs->ep_tdl);
+}
+
+dma_addr_t cdns3_trb_virt_to_dma(struct cdns3_endpoint *priv_ep,
+				 struct cdns3_trb *trb)
+{
+	u32 offset = (char *)trb - (char *)priv_ep->trb_pool;
+
+	return priv_ep->trb_pool_dma + offset;
+}
+
+static void cdns3_free_trb_pool(struct cdns3_endpoint *priv_ep)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+
+	if (priv_ep->trb_pool) {
+		dma_pool_free(priv_dev->eps_dma_pool,
+			      priv_ep->trb_pool, priv_ep->trb_pool_dma);
+		priv_ep->trb_pool = NULL;
+	}
+}
+
+/**
+ * cdns3_allocate_trb_pool - Allocates TRB's pool for selected endpoint
+ * @priv_ep:  endpoint object
+ *
+ * Function will return 0 on success or -ENOMEM on allocation error
+ */
+int cdns3_allocate_trb_pool(struct cdns3_endpoint *priv_ep)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+	int ring_size = TRB_RING_SIZE;
+	int num_trbs = ring_size / TRB_SIZE;
+	struct cdns3_trb *link_trb;
+
+	if (priv_ep->trb_pool && priv_ep->alloc_ring_size < ring_size)
+		cdns3_free_trb_pool(priv_ep);
+
+	if (!priv_ep->trb_pool) {
+		priv_ep->trb_pool = dma_pool_alloc(priv_dev->eps_dma_pool,
+						   GFP_ATOMIC,
+						   &priv_ep->trb_pool_dma);
+
+		if (!priv_ep->trb_pool)
+			return -ENOMEM;
+
+		priv_ep->alloc_ring_size = ring_size;
+	}
+
+	memset(priv_ep->trb_pool, 0, ring_size);
+
+	priv_ep->num_trbs = num_trbs;
+
+	if (!priv_ep->num)
+		return 0;
+
+	/* Initialize the last TRB as Link TRB */
+	link_trb = (priv_ep->trb_pool + (priv_ep->num_trbs - 1));
+
+	if (priv_ep->use_streams) {
+		/*
+		 * For stream capable endpoints driver use single correct TRB.
+		 * The last trb has zeroed cycle bit
+		 */
+		link_trb->control = 0;
+	} else {
+		link_trb->buffer = cpu_to_le32(TRB_BUFFER(priv_ep->trb_pool_dma));
+		link_trb->control = cpu_to_le32(TRB_CYCLE | TRB_TYPE(TRB_LINK) | TRB_TOGGLE);
+	}
+	return 0;
+}
+
+/**
+ * cdns3_ep_stall_flush - Stalls and flushes selected endpoint
+ * @priv_ep: endpoint object
+ *
+ * Endpoint must be selected before call to this function
+ */
+static void cdns3_ep_stall_flush(struct cdns3_endpoint *priv_ep)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+	int val;
+
+	trace_cdns3_halt(priv_ep, 1, 1);
+
+	writel(EP_CMD_DFLUSH | EP_CMD_ERDY | EP_CMD_SSTALL,
+	       &priv_dev->regs->ep_cmd);
+
+	/* wait for DFLUSH cleared */
+	readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,
+				  !(val & EP_CMD_DFLUSH), 1, 1000);
+	priv_ep->flags |= EP_STALLED;
+	priv_ep->flags &= ~EP_STALL_PENDING;
+}
+
+/**
+ * cdns3_hw_reset_eps_config - reset endpoints configuration kept by controller.
+ * @priv_dev: extended gadget object
+ */
+void cdns3_hw_reset_eps_config(struct cdns3_device *priv_dev)
+{
+	int i;
+
+	writel(USB_CONF_CFGRST, &priv_dev->regs->usb_conf);
+
+	cdns3_allow_enable_l1(priv_dev, 0);
+	priv_dev->hw_configured_flag = 0;
+	priv_dev->onchip_used_size = 0;
+	priv_dev->out_mem_is_allocated = 0;
+	priv_dev->wait_for_setup = 0;
+	priv_dev->using_streams = 0;
+
+	for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++)
+		if (priv_dev->eps[i])
+			priv_dev->eps[i]->flags &= ~EP_CONFIGURED;
+}
+
+/**
+ * cdns3_ep_inc_trb - increment a trb index.
+ * @index: Pointer to the TRB index to increment.
+ * @cs: Cycle state
+ * @trb_in_seg: number of TRBs in segment
+ *
+ * The index should never point to the link TRB. After incrementing,
+ * if it is point to the link TRB, wrap around to the beginning and revert
+ * cycle state bit The
+ * link TRB is always at the last TRB entry.
+ */
+static void cdns3_ep_inc_trb(int *index, u8 *cs, int trb_in_seg)
+{
+	(*index)++;
+	if (*index == (trb_in_seg - 1)) {
+		*index = 0;
+		*cs ^=  1;
+	}
+}
+
+/**
+ * cdns3_ep_inc_enq - increment endpoint's enqueue pointer
+ * @priv_ep: The endpoint whose enqueue pointer we're incrementing
+ */
+static void cdns3_ep_inc_enq(struct cdns3_endpoint *priv_ep)
+{
+	priv_ep->free_trbs--;
+	cdns3_ep_inc_trb(&priv_ep->enqueue, &priv_ep->pcs, priv_ep->num_trbs);
+}
+
+/**
+ * cdns3_ep_inc_deq - increment endpoint's dequeue pointer
+ * @priv_ep: The endpoint whose dequeue pointer we're incrementing
+ */
+static void cdns3_ep_inc_deq(struct cdns3_endpoint *priv_ep)
+{
+	priv_ep->free_trbs++;
+	cdns3_ep_inc_trb(&priv_ep->dequeue, &priv_ep->ccs, priv_ep->num_trbs);
+}
+
+/**
+ * cdns3_allow_enable_l1 - enable/disable permits to transition to L1.
+ * @priv_dev: Extended gadget object
+ * @enable: Enable/disable permit to transition to L1.
+ *
+ * If bit USB_CONF_L1EN is set and device receive Extended Token packet,
+ * then controller answer with ACK handshake.
+ * If bit USB_CONF_L1DS is set and device receive Extended Token packet,
+ * then controller answer with NYET handshake.
+ */
+void cdns3_allow_enable_l1(struct cdns3_device *priv_dev, int enable)
+{
+	if (enable)
+		writel(USB_CONF_L1EN, &priv_dev->regs->usb_conf);
+	else
+		writel(USB_CONF_L1DS, &priv_dev->regs->usb_conf);
+}
+
+enum usb_device_speed cdns3_get_speed(struct cdns3_device *priv_dev)
+{
+	u32 reg;
+
+	reg = readl(&priv_dev->regs->usb_sts);
+
+	if (DEV_SUPERSPEED(reg))
+		return USB_SPEED_SUPER;
+	else if (DEV_HIGHSPEED(reg))
+		return USB_SPEED_HIGH;
+	else if (DEV_FULLSPEED(reg))
+		return USB_SPEED_FULL;
+	else if (DEV_LOWSPEED(reg))
+		return USB_SPEED_LOW;
+	return USB_SPEED_UNKNOWN;
+}
+
+/**
+ * cdns3_start_all_request - add to ring all request not started
+ * @priv_dev: Extended gadget object
+ * @priv_ep: The endpoint for whom request will be started.
+ *
+ * Returns return ENOMEM if transfer ring i not enough TRBs to start
+ *         all requests.
+ */
+static int cdns3_start_all_request(struct cdns3_device *priv_dev,
+				   struct cdns3_endpoint *priv_ep)
+{
+	struct usb_request *request;
+	int ret = 0;
+	u8 pending_empty = list_empty(&priv_ep->pending_req_list);
+
+	/*
+	 * If the last pending transfer is INTERNAL
+	 * OR streams are enabled for this endpoint
+	 * do NOT start new transfer till the last one is pending
+	 */
+	if (!pending_empty) {
+		struct cdns3_request *priv_req;
+
+		request = cdns3_next_request(&priv_ep->pending_req_list);
+		priv_req = to_cdns3_request(request);
+		if ((priv_req->flags & REQUEST_INTERNAL) ||
+		    (priv_ep->flags & EP_TDLCHK_EN) ||
+			priv_ep->use_streams) {
+			dev_dbg(priv_dev->dev, "Blocking external request\n");
+			return ret;
+		}
+	}
+
+	while (!list_empty(&priv_ep->deferred_req_list)) {
+		request = cdns3_next_request(&priv_ep->deferred_req_list);
+
+		if (!priv_ep->use_streams) {
+			ret = cdns3_ep_run_transfer(priv_ep, request);
+		} else {
+			priv_ep->stream_sg_idx = 0;
+			ret = cdns3_ep_run_stream_transfer(priv_ep, request);
+		}
+		if (ret)
+			return ret;
+
+		list_move_tail(&request->list, &priv_ep->pending_req_list);
+		if (request->stream_id != 0 || (priv_ep->flags & EP_TDLCHK_EN))
+			break;
+	}
+
+	priv_ep->flags &= ~EP_RING_FULL;
+	return ret;
+}
+
+/*
+ * WA2: Set flag for all not ISOC OUT endpoints. If this flag is set
+ * driver try to detect whether endpoint need additional internal
+ * buffer for unblocking on-chip FIFO buffer. This flag will be cleared
+ * if before first DESCMISS interrupt the DMA will be armed.
+ */
+#define cdns3_wa2_enable_detection(priv_dev, priv_ep, reg) do { \
+	if (!priv_ep->dir && priv_ep->type != USB_ENDPOINT_XFER_ISOC) { \
+		priv_ep->flags |= EP_QUIRK_EXTRA_BUF_DET; \
+		(reg) |= EP_STS_EN_DESCMISEN; \
+	} } while (0)
+
+static void __cdns3_descmiss_copy_data(struct usb_request *request,
+	struct usb_request *descmiss_req)
+{
+	int length = request->actual + descmiss_req->actual;
+	struct scatterlist *s = request->sg;
+
+	if (!s) {
+		if (length <= request->length) {
+			memcpy(&((u8 *)request->buf)[request->actual],
+			       descmiss_req->buf,
+			       descmiss_req->actual);
+			request->actual = length;
+		} else {
+			/* It should never occures */
+			request->status = -ENOMEM;
+		}
+	} else {
+		if (length <= sg_dma_len(s)) {
+			void *p = phys_to_virt(sg_dma_address(s));
+
+			memcpy(&((u8 *)p)[request->actual],
+				descmiss_req->buf,
+				descmiss_req->actual);
+			request->actual = length;
+		} else {
+			request->status = -ENOMEM;
+		}
+	}
+}
+
+/**
+ * cdns3_wa2_descmiss_copy_data - copy data from internal requests to
+ * request queued by class driver.
+ * @priv_ep: extended endpoint object
+ * @request: request object
+ */
+static void cdns3_wa2_descmiss_copy_data(struct cdns3_endpoint *priv_ep,
+					 struct usb_request *request)
+{
+	struct usb_request *descmiss_req;
+	struct cdns3_request *descmiss_priv_req;
+
+	while (!list_empty(&priv_ep->wa2_descmiss_req_list)) {
+		int chunk_end;
+
+		descmiss_priv_req =
+			cdns3_next_priv_request(&priv_ep->wa2_descmiss_req_list);
+		descmiss_req = &descmiss_priv_req->request;
+
+		/* driver can't touch pending request */
+		if (descmiss_priv_req->flags & REQUEST_PENDING)
+			break;
+
+		chunk_end = descmiss_priv_req->flags & REQUEST_INTERNAL_CH;
+		request->status = descmiss_req->status;
+		__cdns3_descmiss_copy_data(request, descmiss_req);
+		list_del_init(&descmiss_priv_req->list);
+		kfree(descmiss_req->buf);
+		cdns3_gadget_ep_free_request(&priv_ep->endpoint, descmiss_req);
+		--priv_ep->wa2_counter;
+
+		if (!chunk_end)
+			break;
+	}
+}
+
+static struct usb_request *cdns3_wa2_gadget_giveback(struct cdns3_device *priv_dev,
+						     struct cdns3_endpoint *priv_ep,
+						     struct cdns3_request *priv_req)
+{
+	if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN &&
+	    priv_req->flags & REQUEST_INTERNAL) {
+		struct usb_request *req;
+
+		req = cdns3_next_request(&priv_ep->deferred_req_list);
+
+		priv_ep->descmis_req = NULL;
+
+		if (!req)
+			return NULL;
+
+		/* unmap the gadget request before copying data */
+		usb_gadget_unmap_request_by_dev(priv_dev->sysdev, req,
+						priv_ep->dir);
+
+		cdns3_wa2_descmiss_copy_data(priv_ep, req);
+		if (!(priv_ep->flags & EP_QUIRK_END_TRANSFER) &&
+		    req->length != req->actual) {
+			/* wait for next part of transfer */
+			/* re-map the gadget request buffer*/
+			usb_gadget_map_request_by_dev(priv_dev->sysdev, req,
+				usb_endpoint_dir_in(priv_ep->endpoint.desc));
+			return NULL;
+		}
+
+		if (req->status == -EINPROGRESS)
+			req->status = 0;
+
+		list_del_init(&req->list);
+		cdns3_start_all_request(priv_dev, priv_ep);
+		return req;
+	}
+
+	return &priv_req->request;
+}
+
+static int cdns3_wa2_gadget_ep_queue(struct cdns3_device *priv_dev,
+				     struct cdns3_endpoint *priv_ep,
+				     struct cdns3_request *priv_req)
+{
+	int deferred = 0;
+
+	/*
+	 * If transfer was queued before DESCMISS appear than we
+	 * can disable handling of DESCMISS interrupt. Driver assumes that it
+	 * can disable special treatment for this endpoint.
+	 */
+	if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET) {
+		u32 reg;
+
+		cdns3_select_ep(priv_dev, priv_ep->num | priv_ep->dir);
+		priv_ep->flags &= ~EP_QUIRK_EXTRA_BUF_DET;
+		reg = readl(&priv_dev->regs->ep_sts_en);
+		reg &= ~EP_STS_EN_DESCMISEN;
+		trace_cdns3_wa2(priv_ep, "workaround disabled\n");
+		writel(reg, &priv_dev->regs->ep_sts_en);
+	}
+
+	if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN) {
+		u8 pending_empty = list_empty(&priv_ep->pending_req_list);
+		u8 descmiss_empty = list_empty(&priv_ep->wa2_descmiss_req_list);
+
+		/*
+		 *  DESCMISS transfer has been finished, so data will be
+		 *  directly copied from internal allocated usb_request
+		 *  objects.
+		 */
+		if (pending_empty && !descmiss_empty &&
+		    !(priv_req->flags & REQUEST_INTERNAL)) {
+			cdns3_wa2_descmiss_copy_data(priv_ep,
+						     &priv_req->request);
+
+			trace_cdns3_wa2(priv_ep, "get internal stored data");
+
+			list_add_tail(&priv_req->request.list,
+				      &priv_ep->pending_req_list);
+			cdns3_gadget_giveback(priv_ep, priv_req,
+					      priv_req->request.status);
+
+			/*
+			 * Intentionally driver returns positive value as
+			 * correct value. It informs that transfer has
+			 * been finished.
+			 */
+			return EINPROGRESS;
+		}
+
+		/*
+		 * Driver will wait for completion DESCMISS transfer,
+		 * before starts new, not DESCMISS transfer.
+		 */
+		if (!pending_empty && !descmiss_empty) {
+			trace_cdns3_wa2(priv_ep, "wait for pending transfer\n");
+			deferred = 1;
+		}
+
+		if (priv_req->flags & REQUEST_INTERNAL)
+			list_add_tail(&priv_req->list,
+				      &priv_ep->wa2_descmiss_req_list);
+	}
+
+	return deferred;
+}
+
+static void cdns3_wa2_remove_old_request(struct cdns3_endpoint *priv_ep)
+{
+	struct cdns3_request *priv_req;
+
+	while (!list_empty(&priv_ep->wa2_descmiss_req_list)) {
+		u8 chain;
+
+		priv_req = cdns3_next_priv_request(&priv_ep->wa2_descmiss_req_list);
+		chain = !!(priv_req->flags & REQUEST_INTERNAL_CH);
+
+		trace_cdns3_wa2(priv_ep, "removes eldest request");
+
+		kfree(priv_req->request.buf);
+		list_del_init(&priv_req->list);
+		cdns3_gadget_ep_free_request(&priv_ep->endpoint,
+					     &priv_req->request);
+		--priv_ep->wa2_counter;
+
+		if (!chain)
+			break;
+	}
+}
+
+/**
+ * cdns3_wa2_descmissing_packet - handles descriptor missing event.
+ * @priv_ep: extended gadget object
+ *
+ * This function is used only for WA2. For more information see Work around 2
+ * description.
+ */
+static void cdns3_wa2_descmissing_packet(struct cdns3_endpoint *priv_ep)
+{
+	struct cdns3_request *priv_req;
+	struct usb_request *request;
+	u8 pending_empty = list_empty(&priv_ep->pending_req_list);
+
+	/* check for pending transfer */
+	if (!pending_empty) {
+		trace_cdns3_wa2(priv_ep, "Ignoring Descriptor missing IRQ\n");
+		return;
+	}
+
+	if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET) {
+		priv_ep->flags &= ~EP_QUIRK_EXTRA_BUF_DET;
+		priv_ep->flags |= EP_QUIRK_EXTRA_BUF_EN;
+	}
+
+	trace_cdns3_wa2(priv_ep, "Description Missing detected\n");
+
+	if (priv_ep->wa2_counter >= CDNS3_WA2_NUM_BUFFERS) {
+		trace_cdns3_wa2(priv_ep, "WA2 overflow\n");
+		cdns3_wa2_remove_old_request(priv_ep);
+	}
+
+	request = cdns3_gadget_ep_alloc_request(&priv_ep->endpoint,
+						GFP_ATOMIC);
+	if (!request)
+		goto err;
+
+	priv_req = to_cdns3_request(request);
+	priv_req->flags |= REQUEST_INTERNAL;
+
+	/* if this field is still assigned it indicate that transfer related
+	 * with this request has not been finished yet. Driver in this
+	 * case simply allocate next request and assign flag REQUEST_INTERNAL_CH
+	 * flag to previous one. It will indicate that current request is
+	 * part of the previous one.
+	 */
+	if (priv_ep->descmis_req)
+		priv_ep->descmis_req->flags |= REQUEST_INTERNAL_CH;
+
+	priv_req->request.buf = kzalloc(CDNS3_DESCMIS_BUF_SIZE,
+					GFP_ATOMIC);
+	priv_ep->wa2_counter++;
+
+	if (!priv_req->request.buf) {
+		cdns3_gadget_ep_free_request(&priv_ep->endpoint, request);
+		goto err;
+	}
+
+	priv_req->request.length = CDNS3_DESCMIS_BUF_SIZE;
+	priv_ep->descmis_req = priv_req;
+
+	__cdns3_gadget_ep_queue(&priv_ep->endpoint,
+				&priv_ep->descmis_req->request,
+				GFP_ATOMIC);
+
+	return;
+
+err:
+	dev_err(priv_ep->cdns3_dev->dev,
+		"Failed: No sufficient memory for DESCMIS\n");
+}
+
+static void cdns3_wa2_reset_tdl(struct cdns3_device *priv_dev)
+{
+	u16 tdl = EP_CMD_TDL_GET(readl(&priv_dev->regs->ep_cmd));
+
+	if (tdl) {
+		u16 reset_val = EP_CMD_TDL_MAX + 1 - tdl;
+
+		writel(EP_CMD_TDL_SET(reset_val) | EP_CMD_STDL,
+		       &priv_dev->regs->ep_cmd);
+	}
+}
+
+static void cdns3_wa2_check_outq_status(struct cdns3_device *priv_dev)
+{
+	u32 ep_sts_reg;
+
+	/* select EP0-out */
+	cdns3_select_ep(priv_dev, 0);
+
+	ep_sts_reg = readl(&priv_dev->regs->ep_sts);
+
+	if (EP_STS_OUTQ_VAL(ep_sts_reg)) {
+		u32 outq_ep_num = EP_STS_OUTQ_NO(ep_sts_reg);
+		struct cdns3_endpoint *outq_ep = priv_dev->eps[outq_ep_num];
+
+		if ((outq_ep->flags & EP_ENABLED) && !(outq_ep->use_streams) &&
+		    outq_ep->type != USB_ENDPOINT_XFER_ISOC && outq_ep_num) {
+			u8 pending_empty = list_empty(&outq_ep->pending_req_list);
+
+			if ((outq_ep->flags & EP_QUIRK_EXTRA_BUF_DET) ||
+			    (outq_ep->flags & EP_QUIRK_EXTRA_BUF_EN) ||
+			    !pending_empty) {
+			} else {
+				u32 ep_sts_en_reg;
+				u32 ep_cmd_reg;
+
+				cdns3_select_ep(priv_dev, outq_ep->num |
+						outq_ep->dir);
+				ep_sts_en_reg = readl(&priv_dev->regs->ep_sts_en);
+				ep_cmd_reg = readl(&priv_dev->regs->ep_cmd);
+
+				outq_ep->flags |= EP_TDLCHK_EN;
+				cdns3_set_register_bit(&priv_dev->regs->ep_cfg,
+						       EP_CFG_TDL_CHK);
+
+				cdns3_wa2_enable_detection(priv_dev, outq_ep,
+							   ep_sts_en_reg);
+				writel(ep_sts_en_reg,
+				       &priv_dev->regs->ep_sts_en);
+				/* reset tdl value to zero */
+				cdns3_wa2_reset_tdl(priv_dev);
+				/*
+				 * Memory barrier - Reset tdl before ringing the
+				 * doorbell.
+				 */
+				wmb();
+				if (EP_CMD_DRDY & ep_cmd_reg) {
+					trace_cdns3_wa2(outq_ep, "Enabling WA2 skipping doorbell\n");
+
+				} else {
+					trace_cdns3_wa2(outq_ep, "Enabling WA2 ringing doorbell\n");
+					/*
+					 * ring doorbell to generate DESCMIS irq
+					 */
+					writel(EP_CMD_DRDY,
+					       &priv_dev->regs->ep_cmd);
+				}
+			}
+		}
+	}
+}
+
+/**
+ * cdns3_gadget_giveback - call struct usb_request's ->complete callback
+ * @priv_ep: The endpoint to whom the request belongs to
+ * @priv_req: The request we're giving back
+ * @status: completion code for the request
+ *
+ * Must be called with controller's lock held and interrupts disabled. This
+ * function will unmap @req and call its ->complete() callback to notify upper
+ * layers that it has completed.
+ */
+void cdns3_gadget_giveback(struct cdns3_endpoint *priv_ep,
+			   struct cdns3_request *priv_req,
+			   int status)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+	struct usb_request *request = &priv_req->request;
+
+	list_del_init(&request->list);
+
+	if (request->status == -EINPROGRESS)
+		request->status = status;
+
+	if (likely(!(priv_req->flags & REQUEST_UNALIGNED)))
+		usb_gadget_unmap_request_by_dev(priv_dev->sysdev, request,
+					priv_ep->dir);
+
+	if ((priv_req->flags & REQUEST_UNALIGNED) &&
+	    priv_ep->dir == USB_DIR_OUT && !request->status) {
+		/* Make DMA buffer CPU accessible */
+		dma_sync_single_for_cpu(priv_dev->sysdev,
+			priv_req->aligned_buf->dma,
+			request->actual,
+			priv_req->aligned_buf->dir);
+		memcpy(request->buf, priv_req->aligned_buf->buf,
+		       request->actual);
+	}
+
+	priv_req->flags &= ~(REQUEST_PENDING | REQUEST_UNALIGNED);
+	/* All TRBs have finished, clear the counter */
+	priv_req->finished_trb = 0;
+	trace_cdns3_gadget_giveback(priv_req);
+
+	if (priv_dev->dev_ver < DEV_VER_V2) {
+		request = cdns3_wa2_gadget_giveback(priv_dev, priv_ep,
+						    priv_req);
+		if (!request)
+			return;
+	}
+
+	/*
+	 * zlp request is appended by driver, needn't call usb_gadget_giveback_request() to notify
+	 * gadget composite driver.
+	 */
+	if (request->complete && request->buf != priv_dev->zlp_buf) {
+		spin_unlock(&priv_dev->lock);
+		usb_gadget_giveback_request(&priv_ep->endpoint,
+					    request);
+		spin_lock(&priv_dev->lock);
+	}
+
+	if (request->buf == priv_dev->zlp_buf)
+		cdns3_gadget_ep_free_request(&priv_ep->endpoint, request);
+}
+
+static void cdns3_wa1_restore_cycle_bit(struct cdns3_endpoint *priv_ep)
+{
+	/* Work around for stale data address in TRB*/
+	if (priv_ep->wa1_set) {
+		trace_cdns3_wa1(priv_ep, "restore cycle bit");
+
+		priv_ep->wa1_set = 0;
+		priv_ep->wa1_trb_index = 0xFFFF;
+		if (priv_ep->wa1_cycle_bit) {
+			priv_ep->wa1_trb->control =
+				priv_ep->wa1_trb->control | cpu_to_le32(0x1);
+		} else {
+			priv_ep->wa1_trb->control =
+				priv_ep->wa1_trb->control & cpu_to_le32(~0x1);
+		}
+	}
+}
+
+static void cdns3_free_aligned_request_buf(struct work_struct *work)
+{
+	struct cdns3_device *priv_dev = container_of(work, struct cdns3_device,
+					aligned_buf_wq);
+	struct cdns3_aligned_buf *buf, *tmp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv_dev->lock, flags);
+
+	list_for_each_entry_safe(buf, tmp, &priv_dev->aligned_buf_list, list) {
+		if (!buf->in_use) {
+			list_del(&buf->list);
+
+			/*
+			 * Re-enable interrupts to free DMA capable memory.
+			 * Driver can't free this memory with disabled
+			 * interrupts.
+			 */
+			spin_unlock_irqrestore(&priv_dev->lock, flags);
+			dma_free_noncoherent(priv_dev->sysdev, buf->size,
+					  buf->buf, buf->dma, buf->dir);
+			kfree(buf);
+			spin_lock_irqsave(&priv_dev->lock, flags);
+		}
+	}
+
+	spin_unlock_irqrestore(&priv_dev->lock, flags);
+}
+
+static int cdns3_prepare_aligned_request_buf(struct cdns3_request *priv_req)
+{
+	struct cdns3_endpoint *priv_ep = priv_req->priv_ep;
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+	struct cdns3_aligned_buf *buf;
+
+	/* check if buffer is aligned to 8. */
+	if (!((uintptr_t)priv_req->request.buf & 0x7))
+		return 0;
+
+	buf = priv_req->aligned_buf;
+
+	if (!buf || priv_req->request.length > buf->size) {
+		buf = kzalloc_obj(*buf, GFP_ATOMIC);
+		if (!buf)
+			return -ENOMEM;
+
+		buf->size = priv_req->request.length;
+		buf->dir = usb_endpoint_dir_in(priv_ep->endpoint.desc) ?
+			DMA_TO_DEVICE : DMA_FROM_DEVICE;
+
+		buf->buf = dma_alloc_noncoherent(priv_dev->sysdev,
+					      buf->size,
+					      &buf->dma,
+					      buf->dir,
+					      GFP_ATOMIC);
+		if (!buf->buf) {
+			kfree(buf);
+			return -ENOMEM;
+		}
+
+		if (priv_req->aligned_buf) {
+			trace_cdns3_free_aligned_request(priv_req);
+			priv_req->aligned_buf->in_use = 0;
+			queue_work(system_freezable_wq,
+				   &priv_dev->aligned_buf_wq);
+		}
+
+		buf->in_use = 1;
+		priv_req->aligned_buf = buf;
+
+		list_add_tail(&buf->list,
+			      &priv_dev->aligned_buf_list);
+	}
+
+	if (priv_ep->dir == USB_DIR_IN) {
+		/* Make DMA buffer CPU accessible */
+		dma_sync_single_for_cpu(priv_dev->sysdev,
+			buf->dma, buf->size, buf->dir);
+		memcpy(buf->buf, priv_req->request.buf,
+		       priv_req->request.length);
+	}
+
+	/* Transfer DMA buffer ownership back to device */
+	dma_sync_single_for_device(priv_dev->sysdev,
+			buf->dma, buf->size, buf->dir);
+
+	priv_req->flags |= REQUEST_UNALIGNED;
+	trace_cdns3_prepare_aligned_request(priv_req);
+
+	return 0;
+}
+
+static int cdns3_wa1_update_guard(struct cdns3_endpoint *priv_ep,
+				  struct cdns3_trb *trb)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+
+	if (!priv_ep->wa1_set) {
+		u32 doorbell;
+
+		doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY);
+
+		if (doorbell) {
+			priv_ep->wa1_cycle_bit = priv_ep->pcs ? TRB_CYCLE : 0;
+			priv_ep->wa1_set = 1;
+			priv_ep->wa1_trb = trb;
+			priv_ep->wa1_trb_index = priv_ep->enqueue;
+			trace_cdns3_wa1(priv_ep, "set guard");
+			return 0;
+		}
+	}
+	return 1;
+}
+
+static void cdns3_wa1_tray_restore_cycle_bit(struct cdns3_device *priv_dev,
+					     struct cdns3_endpoint *priv_ep)
+{
+	int dma_index;
+	u32 doorbell;
+
+	doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY);
+	dma_index = cdns3_get_dma_pos(priv_dev, priv_ep);
+
+	if (!doorbell || dma_index != priv_ep->wa1_trb_index)
+		cdns3_wa1_restore_cycle_bit(priv_ep);
+}
+
+static int cdns3_ep_run_stream_transfer(struct cdns3_endpoint *priv_ep,
+					struct usb_request *request)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+	struct cdns3_request *priv_req;
+	struct cdns3_trb *trb;
+	dma_addr_t trb_dma;
+	int address;
+	u32 control;
+	u32 length;
+	u32 tdl;
+	unsigned int sg_idx = priv_ep->stream_sg_idx;
+
+	priv_req = to_cdns3_request(request);
+	address = priv_ep->endpoint.desc->bEndpointAddress;
+
+	priv_ep->flags |= EP_PENDING_REQUEST;
+
+	/* must allocate buffer aligned to 8 */
+	if (priv_req->flags & REQUEST_UNALIGNED)
+		trb_dma = priv_req->aligned_buf->dma;
+	else
+		trb_dma = request->dma;
+
+	/*  For stream capable endpoints driver use only single TD. */
+	trb = priv_ep->trb_pool + priv_ep->enqueue;
+	priv_req->start_trb = priv_ep->enqueue;
+	priv_req->end_trb = priv_req->start_trb;
+	priv_req->trb = trb;
+
+	cdns3_select_ep(priv_ep->cdns3_dev, address);
+
+	control = TRB_TYPE(TRB_NORMAL) | TRB_CYCLE |
+		  TRB_STREAM_ID(priv_req->request.stream_id) | TRB_ISP;
+
+	if (!request->num_sgs) {
+		trb->buffer = cpu_to_le32(TRB_BUFFER(trb_dma));
+		length = request->length;
+	} else {
+		trb->buffer = cpu_to_le32(TRB_BUFFER(request->sg[sg_idx].dma_address));
+		length = request->sg[sg_idx].length;
+	}
+
+	tdl = DIV_ROUND_UP(length, priv_ep->endpoint.maxpacket);
+
+	trb->length = cpu_to_le32(TRB_BURST_LEN(16) | TRB_LEN(length));
+
+	/*
+	 * For DEV_VER_V2 controller version we have enabled
+	 * USB_CONF2_EN_TDL_TRB in DMULT configuration.
+	 * This enables TDL calculation based on TRB, hence setting TDL in TRB.
+	 */
+	if (priv_dev->dev_ver >= DEV_VER_V2) {
+		if (priv_dev->gadget.speed == USB_SPEED_SUPER)
+			trb->length |= cpu_to_le32(TRB_TDL_SS_SIZE(tdl));
+	}
+	priv_req->flags |= REQUEST_PENDING;
+
+	trb->control = cpu_to_le32(control);
+
+	trace_cdns3_prepare_trb(priv_ep, priv_req->trb);
+
+	/*
+	 * Memory barrier - Cycle Bit must be set before trb->length  and
+	 * trb->buffer fields.
+	 */
+	wmb();
+
+	/* always first element */
+	writel(EP_TRADDR_TRADDR(priv_ep->trb_pool_dma),
+	       &priv_dev->regs->ep_traddr);
+
+	if (!(priv_ep->flags & EP_STALLED)) {
+		trace_cdns3_ring(priv_ep);
+		/*clearing TRBERR and EP_STS_DESCMIS before seting DRDY*/
+		writel(EP_STS_TRBERR | EP_STS_DESCMIS, &priv_dev->regs->ep_sts);
+
+		priv_ep->prime_flag = false;
+
+		/*
+		 * Controller version DEV_VER_V2 tdl calculation
+		 * is based on TRB
+		 */
+
+		if (priv_dev->dev_ver < DEV_VER_V2)
+			writel(EP_CMD_TDL_SET(tdl) | EP_CMD_STDL,
+			       &priv_dev->regs->ep_cmd);
+		else if (priv_dev->dev_ver > DEV_VER_V2)
+			writel(tdl, &priv_dev->regs->ep_tdl);
+
+		priv_ep->last_stream_id = priv_req->request.stream_id;
+		writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd);
+		writel(EP_CMD_ERDY_SID(priv_req->request.stream_id) |
+		       EP_CMD_ERDY, &priv_dev->regs->ep_cmd);
+
+		trace_cdns3_doorbell_epx(priv_ep->name,
+					 readl(&priv_dev->regs->ep_traddr));
+	}
+
+	/* WORKAROUND for transition to L0 */
+	__cdns3_gadget_wakeup(priv_dev);
+
+	return 0;
+}
+
+static void cdns3_rearm_drdy_if_needed(struct cdns3_endpoint *priv_ep)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+
+	if (priv_dev->dev_ver < DEV_VER_V3)
+		return;
+
+	if (readl(&priv_dev->regs->ep_sts) & EP_STS_TRBERR) {
+		writel(EP_STS_TRBERR, &priv_dev->regs->ep_sts);
+		writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd);
+	}
+}
+
+/**
+ * cdns3_ep_run_transfer - start transfer on no-default endpoint hardware
+ * @priv_ep: endpoint object
+ * @request: request object
+ *
+ * Returns zero on success or negative value on failure
+ */
+static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
+				 struct usb_request *request)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+	struct cdns3_request *priv_req;
+	struct cdns3_trb *trb;
+	struct cdns3_trb *link_trb = NULL;
+	dma_addr_t trb_dma;
+	u32 togle_pcs = 1;
+	int sg_iter = 0;
+	int num_trb_req;
+	int trb_burst;
+	int num_trb;
+	int address;
+	u32 control;
+	int pcs;
+	u16 total_tdl = 0;
+	struct scatterlist *s = NULL;
+	bool sg_supported = !!(request->num_mapped_sgs);
+	u32 ioc = request->no_interrupt ? 0 : TRB_IOC;
+
+	num_trb_req = sg_supported ? request->num_mapped_sgs : 1;
+
+	/* ISO transfer require each SOF have a TD, each TD include some TRBs */
+	if (priv_ep->type == USB_ENDPOINT_XFER_ISOC)
+		num_trb = priv_ep->interval * num_trb_req;
+	else
+		num_trb = num_trb_req;
+
+	priv_req = to_cdns3_request(request);
+	address = priv_ep->endpoint.desc->bEndpointAddress;
+
+	priv_ep->flags |= EP_PENDING_REQUEST;
+
+	/* must allocate buffer aligned to 8 */
+	if (priv_req->flags & REQUEST_UNALIGNED)
+		trb_dma = priv_req->aligned_buf->dma;
+	else
+		trb_dma = request->dma;
+
+	trb = priv_ep->trb_pool + priv_ep->enqueue;
+	priv_req->start_trb = priv_ep->enqueue;
+	priv_req->trb = trb;
+
+	cdns3_select_ep(priv_ep->cdns3_dev, address);
+
+	/* prepare ring */
+	if ((priv_ep->enqueue + num_trb)  >= (priv_ep->num_trbs - 1)) {
+		int doorbell, dma_index;
+		u32 ch_bit = 0;
+
+		doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY);
+		dma_index = cdns3_get_dma_pos(priv_dev, priv_ep);
+
+		/* Driver can't update LINK TRB if it is current processed. */
+		if (doorbell && dma_index == priv_ep->num_trbs - 1) {
+			priv_ep->flags |= EP_DEFERRED_DRDY;
+			return -ENOBUFS;
+		}
+
+		/*updating C bt in  Link TRB before starting DMA*/
+		link_trb = priv_ep->trb_pool + (priv_ep->num_trbs - 1);
+		/*
+		 * For TRs size equal 2 enabling TRB_CHAIN for epXin causes
+		 * that DMA stuck at the LINK TRB.
+		 * On the other hand, removing TRB_CHAIN for longer TRs for
+		 * epXout cause that DMA stuck after handling LINK TRB.
+		 * To eliminate this strange behavioral driver set TRB_CHAIN
+		 * bit only for TR size > 2.
+		 */
+		if (priv_ep->type == USB_ENDPOINT_XFER_ISOC ||
+		    TRBS_PER_SEGMENT > 2)
+			ch_bit = TRB_CHAIN;
+
+		link_trb->control = cpu_to_le32(((priv_ep->pcs) ? TRB_CYCLE : 0) |
+				    TRB_TYPE(TRB_LINK) | TRB_TOGGLE | ch_bit);
+
+		if (priv_ep->type == USB_ENDPOINT_XFER_ISOC) {
+			/*
+			 * ISO require LINK TRB must be first one of TD.
+			 * Fill LINK TRBs for left trb space to simply software process logic.
+			 */
+			while (priv_ep->enqueue) {
+				*trb = *link_trb;
+				trace_cdns3_prepare_trb(priv_ep, trb);
+
+				cdns3_ep_inc_enq(priv_ep);
+				trb = priv_ep->trb_pool + priv_ep->enqueue;
+				priv_req->trb = trb;
+			}
+		}
+	}
+
+	if (num_trb > priv_ep->free_trbs) {
+		priv_ep->flags |= EP_RING_FULL;
+		return -ENOBUFS;
+	}
+
+	if (priv_dev->dev_ver <= DEV_VER_V2)
+		togle_pcs = cdns3_wa1_update_guard(priv_ep, trb);
+
+	/* set incorrect Cycle Bit for first trb*/
+	control = priv_ep->pcs ? 0 : TRB_CYCLE;
+	trb->length = 0;
+	if (priv_dev->dev_ver >= DEV_VER_V2) {
+		u16 td_size;
+
+		td_size = DIV_ROUND_UP(request->length,
+				       priv_ep->endpoint.maxpacket);
+		if (priv_dev->gadget.speed == USB_SPEED_SUPER)
+			trb->length = cpu_to_le32(TRB_TDL_SS_SIZE(td_size));
+		else
+			control |= TRB_TDL_HS_SIZE(td_size);
+	}
+
+	do {
+		u32 length;
+
+		if (!(sg_iter % num_trb_req) && sg_supported)
+			s = request->sg;
+
+		/* fill TRB */
+		control |= TRB_TYPE(TRB_NORMAL);
+		if (sg_supported) {
+			trb->buffer = cpu_to_le32(TRB_BUFFER(sg_dma_address(s)));
+			length = sg_dma_len(s);
+		} else {
+			trb->buffer = cpu_to_le32(TRB_BUFFER(trb_dma));
+			length = request->length;
+		}
+
+		if (priv_ep->flags & EP_TDLCHK_EN)
+			total_tdl += DIV_ROUND_UP(length,
+					       priv_ep->endpoint.maxpacket);
+
+		trb_burst = priv_ep->trb_burst_size;
+
+		/*
+		 * Supposed DMA cross 4k bounder problem should be fixed at DEV_VER_V2, but still
+		 * met problem when do ISO transfer if sg enabled.
+		 *
+		 * Data pattern likes below when sg enabled, package size is 1k and mult is 2
+		 *       [UVC Header(8B) ] [data(3k - 8)] ...
+		 *
+		 * The received data at offset 0xd000 will get 0xc000 data, len 0x70. Error happen
+		 * as below pattern:
+		 *	0xd000: wrong
+		 *	0xe000: wrong
+		 *	0xf000: correct
+		 *	0x10000: wrong
+		 *	0x11000: wrong
+		 *	0x12000: correct
+		 *	...
+		 *
+		 * But it is still unclear about why error have not happen below 0xd000, it should
+		 * cross 4k bounder. But anyway, the below code can fix this problem.
+		 *
+		 * To avoid DMA cross 4k bounder at ISO transfer, reduce burst len according to 16.
+		 */
+		if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && priv_dev->dev_ver <= DEV_VER_V2)
+			if (ALIGN_DOWN(trb->buffer, SZ_4K) !=
+			    ALIGN_DOWN(trb->buffer + length, SZ_4K))
+				trb_burst = 16;
+
+		trb->length |= cpu_to_le32(TRB_BURST_LEN(trb_burst) |
+					TRB_LEN(length));
+		pcs = priv_ep->pcs ? TRB_CYCLE : 0;
+
+		/*
+		 * first trb should be prepared as last to avoid processing
+		 *  transfer to early
+		 */
+		if (sg_iter != 0)
+			control |= pcs;
+
+		if (priv_ep->type == USB_ENDPOINT_XFER_ISOC  && !priv_ep->dir) {
+			control |= ioc | TRB_ISP;
+		} else {
+			/* for last element in TD or in SG list */
+			if (sg_iter == (num_trb - 1) && sg_iter != 0)
+				control |= pcs | ioc | TRB_ISP;
+		}
+
+		if (sg_iter)
+			trb->control = cpu_to_le32(control);
+		else
+			priv_req->trb->control = cpu_to_le32(control);
+
+		if (sg_supported) {
+			trb->control |= cpu_to_le32(TRB_ISP);
+			/* Don't set chain bit for last TRB */
+			if ((sg_iter % num_trb_req) < num_trb_req - 1)
+				trb->control |= cpu_to_le32(TRB_CHAIN);
+
+			s = sg_next(s);
+		}
+
+		control = 0;
+		++sg_iter;
+		priv_req->end_trb = priv_ep->enqueue;
+		cdns3_ep_inc_enq(priv_ep);
+		trb = priv_ep->trb_pool + priv_ep->enqueue;
+		trb->length = 0;
+	} while (sg_iter < num_trb);
+
+	trb = priv_req->trb;
+
+	priv_req->flags |= REQUEST_PENDING;
+	priv_req->num_of_trb = num_trb;
+
+	if (sg_iter == 1)
+		trb->control |= cpu_to_le32(ioc | TRB_ISP);
+
+	if (priv_dev->dev_ver < DEV_VER_V2 &&
+	    (priv_ep->flags & EP_TDLCHK_EN)) {
+		u16 tdl = total_tdl;
+		u16 old_tdl = EP_CMD_TDL_GET(readl(&priv_dev->regs->ep_cmd));
+
+		if (tdl > EP_CMD_TDL_MAX) {
+			tdl = EP_CMD_TDL_MAX;
+			priv_ep->pending_tdl = total_tdl - EP_CMD_TDL_MAX;
+		}
+
+		if (old_tdl < tdl) {
+			tdl -= old_tdl;
+			writel(EP_CMD_TDL_SET(tdl) | EP_CMD_STDL,
+			       &priv_dev->regs->ep_cmd);
+		}
+	}
+
+	/*
+	 * Memory barrier - cycle bit must be set before other filds in trb.
+	 */
+	wmb();
+
+	/* give the TD to the consumer*/
+	if (togle_pcs)
+		trb->control = trb->control ^ cpu_to_le32(1);
+
+	if (priv_dev->dev_ver <= DEV_VER_V2)
+		cdns3_wa1_tray_restore_cycle_bit(priv_dev, priv_ep);
+
+	if (num_trb > 1) {
+		int i = 0;
+
+		while (i < num_trb) {
+			trace_cdns3_prepare_trb(priv_ep, trb + i);
+			if (trb + i == link_trb) {
+				trb = priv_ep->trb_pool;
+				num_trb = num_trb - i;
+				i = 0;
+			} else {
+				i++;
+			}
+		}
+	} else {
+		trace_cdns3_prepare_trb(priv_ep, priv_req->trb);
+	}
+
+	/*
+	 * Memory barrier - Cycle Bit must be set before trb->length  and
+	 * trb->buffer fields.
+	 */
+	wmb();
+
+	/*
+	 * For DMULT mode we can set address to transfer ring only once after
+	 * enabling endpoint.
+	 */
+	if (priv_ep->flags & EP_UPDATE_EP_TRBADDR) {
+		/*
+		 * Until SW is not ready to handle the OUT transfer the ISO OUT
+		 * Endpoint should be disabled (EP_CFG.ENABLE = 0).
+		 * EP_CFG_ENABLE must be set before updating ep_traddr.
+		 */
+		if (priv_ep->type == USB_ENDPOINT_XFER_ISOC  && !priv_ep->dir &&
+		    !(priv_ep->flags & EP_QUIRK_ISO_OUT_EN)) {
+			priv_ep->flags |= EP_QUIRK_ISO_OUT_EN;
+			cdns3_set_register_bit(&priv_dev->regs->ep_cfg,
+					       EP_CFG_ENABLE);
+		}
+
+		writel(EP_TRADDR_TRADDR(priv_ep->trb_pool_dma +
+					priv_req->start_trb * TRB_SIZE),
+					&priv_dev->regs->ep_traddr);
+
+		priv_ep->flags &= ~EP_UPDATE_EP_TRBADDR;
+	}
+
+	if (!priv_ep->wa1_set && !(priv_ep->flags & EP_STALLED)) {
+		trace_cdns3_ring(priv_ep);
+		/*clearing TRBERR and EP_STS_DESCMIS before seting DRDY*/
+		writel(EP_STS_TRBERR | EP_STS_DESCMIS, &priv_dev->regs->ep_sts);
+		writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd);
+		cdns3_rearm_drdy_if_needed(priv_ep);
+		trace_cdns3_doorbell_epx(priv_ep->name,
+					 readl(&priv_dev->regs->ep_traddr));
+	}
+
+	/* WORKAROUND for transition to L0 */
+	__cdns3_gadget_wakeup(priv_dev);
+
+	return 0;
+}
+
+void cdns3_set_hw_configuration(struct cdns3_device *priv_dev)
+{
+	struct cdns3_endpoint *priv_ep;
+	struct usb_ep *ep;
+
+	if (priv_dev->hw_configured_flag)
+		return;
+
+	writel(USB_CONF_CFGSET, &priv_dev->regs->usb_conf);
+
+	cdns3_set_register_bit(&priv_dev->regs->usb_conf,
+			       USB_CONF_U1EN | USB_CONF_U2EN);
+
+	priv_dev->hw_configured_flag = 1;
+
+	list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) {
+		if (ep->enabled) {
+			priv_ep = ep_to_cdns3_ep(ep);
+			cdns3_start_all_request(priv_dev, priv_ep);
+		}
+	}
+
+	cdns3_allow_enable_l1(priv_dev, 1);
+}
+
+/**
+ * cdns3_trb_handled - check whether trb has been handled by DMA
+ *
+ * @priv_ep: extended endpoint object.
+ * @priv_req: request object for checking
+ *
+ * Endpoint must be selected before invoking this function.
+ *
+ * Returns false if request has not been handled by DMA, else returns true.
+ *
+ * SR - start ring
+ * ER -  end ring
+ * DQ = priv_ep->dequeue - dequeue position
+ * EQ = priv_ep->enqueue -  enqueue position
+ * ST = priv_req->start_trb - index of first TRB in transfer ring
+ * ET = priv_req->end_trb - index of last TRB in transfer ring
+ * CI = current_index - index of processed TRB by DMA.
+ *
+ * As first step, we check if the TRB between the ST and ET.
+ * Then, we check if cycle bit for index priv_ep->dequeue
+ * is correct.
+ *
+ * some rules:
+ * 1. priv_ep->dequeue never equals to current_index.
+ * 2  priv_ep->enqueue never exceed priv_ep->dequeue
+ * 3. exception: priv_ep->enqueue == priv_ep->dequeue
+ *    and priv_ep->free_trbs is zero.
+ *    This case indicate that TR is full.
+ *
+ * At below two cases, the request have been handled.
+ * Case 1 - priv_ep->dequeue < current_index
+ *      SR ... EQ ... DQ ... CI ... ER
+ *      SR ... DQ ... CI ... EQ ... ER
+ *
+ * Case 2 - priv_ep->dequeue > current_index
+ * This situation takes place when CI go through the LINK TRB at the end of
+ * transfer ring.
+ *      SR ... CI ... EQ ... DQ ... ER
+ */
+static bool cdns3_trb_handled(struct cdns3_endpoint *priv_ep,
+				  struct cdns3_request *priv_req)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+	struct cdns3_trb *trb;
+	int current_index = 0;
+	int handled = 0;
+	int doorbell;
+
+	current_index = cdns3_get_dma_pos(priv_dev, priv_ep);
+	doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY);
+
+	/* current trb doesn't belong to this request */
+	if (priv_req->start_trb < priv_req->end_trb) {
+		if (priv_ep->dequeue > priv_req->end_trb)
+			goto finish;
+
+		if (priv_ep->dequeue < priv_req->start_trb)
+			goto finish;
+	}
+
+	if ((priv_req->start_trb > priv_req->end_trb) &&
+		(priv_ep->dequeue > priv_req->end_trb) &&
+		(priv_ep->dequeue < priv_req->start_trb))
+		goto finish;
+
+	if ((priv_req->start_trb == priv_req->end_trb) &&
+		(priv_ep->dequeue != priv_req->end_trb))
+		goto finish;
+
+	trb = &priv_ep->trb_pool[priv_ep->dequeue];
+
+	if ((le32_to_cpu(trb->control) & TRB_CYCLE) != priv_ep->ccs)
+		goto finish;
+
+	if (doorbell == 1 && current_index == priv_ep->dequeue)
+		goto finish;
+
+	/* The corner case for TRBS_PER_SEGMENT equal 2). */
+	if (TRBS_PER_SEGMENT == 2 && priv_ep->type != USB_ENDPOINT_XFER_ISOC) {
+		handled = 1;
+		goto finish;
+	}
+
+	if (priv_ep->enqueue == priv_ep->dequeue &&
+	    priv_ep->free_trbs == 0) {
+		handled = 1;
+	} else if (priv_ep->dequeue < current_index) {
+		if ((current_index == (priv_ep->num_trbs - 1)) &&
+		    !priv_ep->dequeue)
+			goto finish;
+
+		handled = 1;
+	} else if (priv_ep->dequeue  > current_index) {
+			handled = 1;
+	}
+
+finish:
+	trace_cdns3_request_handled(priv_req, current_index, handled);
+
+	return handled;
+}
+
+static void cdns3_transfer_completed(struct cdns3_device *priv_dev,
+				     struct cdns3_endpoint *priv_ep)
+{
+	struct cdns3_request *priv_req;
+	struct usb_request *request;
+	struct cdns3_trb *trb;
+	bool request_handled = false;
+	bool transfer_end = false;
+
+	while (!list_empty(&priv_ep->pending_req_list)) {
+		request = cdns3_next_request(&priv_ep->pending_req_list);
+		priv_req = to_cdns3_request(request);
+
+		trb = priv_ep->trb_pool + priv_ep->dequeue;
+
+		/* The TRB was changed as link TRB, and the request was handled at ep_dequeue */
+		while (TRB_FIELD_TO_TYPE(le32_to_cpu(trb->control)) == TRB_LINK) {
+
+			/* ISO ep_traddr may stop at LINK TRB */
+			if (priv_ep->dequeue == cdns3_get_dma_pos(priv_dev, priv_ep) &&
+			    priv_ep->type == USB_ENDPOINT_XFER_ISOC)
+				break;
+
+			trace_cdns3_complete_trb(priv_ep, trb);
+			cdns3_ep_inc_deq(priv_ep);
+			trb = priv_ep->trb_pool + priv_ep->dequeue;
+		}
+
+		if (!request->stream_id) {
+			/* Re-select endpoint. It could be changed by other CPU
+			 * during handling usb_gadget_giveback_request.
+			 */
+			cdns3_select_ep(priv_dev, priv_ep->endpoint.address);
+
+			while (cdns3_trb_handled(priv_ep, priv_req)) {
+				priv_req->finished_trb++;
+				if (priv_req->finished_trb >= priv_req->num_of_trb)
+					request_handled = true;
+
+				trb = priv_ep->trb_pool + priv_ep->dequeue;
+				trace_cdns3_complete_trb(priv_ep, trb);
+
+				if (!transfer_end)
+					request->actual +=
+						TRB_LEN(le32_to_cpu(trb->length));
+
+				if (priv_req->num_of_trb > 1 &&
+					le32_to_cpu(trb->control) & TRB_SMM &&
+					le32_to_cpu(trb->control) & TRB_CHAIN)
+					transfer_end = true;
+
+				cdns3_ep_inc_deq(priv_ep);
+			}
+
+			if (request_handled) {
+				/* TRBs are duplicated by priv_ep->interval time for ISO IN */
+				if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && priv_ep->dir)
+					request->actual /= priv_ep->interval;
+
+				cdns3_gadget_giveback(priv_ep, priv_req, 0);
+				request_handled = false;
+				transfer_end = false;
+			} else {
+				goto prepare_next_td;
+			}
+
+			if (priv_ep->type != USB_ENDPOINT_XFER_ISOC &&
+			    TRBS_PER_SEGMENT == 2)
+				break;
+		} else {
+			/* Re-select endpoint. It could be changed by other CPU
+			 * during handling usb_gadget_giveback_request.
+			 */
+			cdns3_select_ep(priv_dev, priv_ep->endpoint.address);
+
+			trb = priv_ep->trb_pool;
+			trace_cdns3_complete_trb(priv_ep, trb);
+
+			if (trb != priv_req->trb)
+				dev_warn(priv_dev->dev,
+					 "request_trb=0x%p, queue_trb=0x%p\n",
+					 priv_req->trb, trb);
+
+			request->actual += TRB_LEN(le32_to_cpu(trb->length));
+
+			if (!request->num_sgs ||
+			    (request->num_sgs == (priv_ep->stream_sg_idx + 1))) {
+				priv_ep->stream_sg_idx = 0;
+				cdns3_gadget_giveback(priv_ep, priv_req, 0);
+			} else {
+				priv_ep->stream_sg_idx++;
+				cdns3_ep_run_stream_transfer(priv_ep, request);
+			}
+			break;
+		}
+	}
+	priv_ep->flags &= ~EP_PENDING_REQUEST;
+
+prepare_next_td:
+	if (!(priv_ep->flags & EP_STALLED) &&
+	    !(priv_ep->flags & EP_STALL_PENDING))
+		cdns3_start_all_request(priv_dev, priv_ep);
+}
+
+void cdns3_rearm_transfer(struct cdns3_endpoint *priv_ep, u8 rearm)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+
+	cdns3_wa1_restore_cycle_bit(priv_ep);
+
+	if (rearm) {
+		trace_cdns3_ring(priv_ep);
+
+		/* Cycle Bit must be updated before arming DMA. */
+		wmb();
+		writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd);
+
+		__cdns3_gadget_wakeup(priv_dev);
+
+		trace_cdns3_doorbell_epx(priv_ep->name,
+					 readl(&priv_dev->regs->ep_traddr));
+	}
+}
+
+static void cdns3_reprogram_tdl(struct cdns3_endpoint *priv_ep)
+{
+	u16 tdl = priv_ep->pending_tdl;
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+
+	if (tdl > EP_CMD_TDL_MAX) {
+		tdl = EP_CMD_TDL_MAX;
+		priv_ep->pending_tdl -= EP_CMD_TDL_MAX;
+	} else {
+		priv_ep->pending_tdl = 0;
+	}
+
+	writel(EP_CMD_TDL_SET(tdl) | EP_CMD_STDL, &priv_dev->regs->ep_cmd);
+}
+
+/**
+ * cdns3_check_ep_interrupt_proceed - Processes interrupt related to endpoint
+ * @priv_ep: endpoint object
+ *
+ * Returns 0
+ */
+static int cdns3_check_ep_interrupt_proceed(struct cdns3_endpoint *priv_ep)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+	u32 ep_sts_reg;
+	struct usb_request *deferred_request;
+	struct usb_request *pending_request;
+	u32 tdl = 0;
+
+	cdns3_select_ep(priv_dev, priv_ep->endpoint.address);
+
+	trace_cdns3_epx_irq(priv_dev, priv_ep);
+
+	ep_sts_reg = readl(&priv_dev->regs->ep_sts);
+	writel(ep_sts_reg, &priv_dev->regs->ep_sts);
+
+	if ((ep_sts_reg & EP_STS_PRIME) && priv_ep->use_streams) {
+		bool dbusy = !!(ep_sts_reg & EP_STS_DBUSY);
+
+		tdl = cdns3_get_tdl(priv_dev);
+
+		/*
+		 * Continue the previous transfer:
+		 * There is some racing between ERDY and PRIME. The device send
+		 * ERDY and almost in the same time Host send PRIME. It cause
+		 * that host ignore the ERDY packet and driver has to send it
+		 * again.
+		 */
+		if (tdl && (dbusy || !EP_STS_BUFFEMPTY(ep_sts_reg) ||
+		    EP_STS_HOSTPP(ep_sts_reg))) {
+			writel(EP_CMD_ERDY |
+			       EP_CMD_ERDY_SID(priv_ep->last_stream_id),
+			       &priv_dev->regs->ep_cmd);
+			ep_sts_reg &= ~(EP_STS_MD_EXIT | EP_STS_IOC);
+		} else {
+			priv_ep->prime_flag = true;
+
+			pending_request = cdns3_next_request(&priv_ep->pending_req_list);
+			deferred_request = cdns3_next_request(&priv_ep->deferred_req_list);
+
+			if (deferred_request && !pending_request) {
+				cdns3_start_all_request(priv_dev, priv_ep);
+			}
+		}
+	}
+
+	if (ep_sts_reg & EP_STS_TRBERR) {
+		if (priv_ep->flags & EP_STALL_PENDING &&
+		    !(ep_sts_reg & EP_STS_DESCMIS &&
+		    priv_dev->dev_ver < DEV_VER_V2)) {
+			cdns3_ep_stall_flush(priv_ep);
+		}
+
+		/*
+		 * For isochronous transfer driver completes request on
+		 * IOC or on TRBERR. IOC appears only when device receive
+		 * OUT data packet. If host disable stream or lost some packet
+		 * then the only way to finish all queued transfer is to do it
+		 * on TRBERR event.
+		 */
+		if (priv_ep->type == USB_ENDPOINT_XFER_ISOC &&
+		    !priv_ep->wa1_set) {
+			if (!priv_ep->dir) {
+				u32 ep_cfg = readl(&priv_dev->regs->ep_cfg);
+
+				ep_cfg &= ~EP_CFG_ENABLE;
+				writel(ep_cfg, &priv_dev->regs->ep_cfg);
+				priv_ep->flags &= ~EP_QUIRK_ISO_OUT_EN;
+				priv_ep->flags |= EP_UPDATE_EP_TRBADDR;
+			}
+			cdns3_transfer_completed(priv_dev, priv_ep);
+		} else if (!(priv_ep->flags & EP_STALLED) &&
+			  !(priv_ep->flags & EP_STALL_PENDING)) {
+			if (priv_ep->flags & EP_DEFERRED_DRDY) {
+				priv_ep->flags &= ~EP_DEFERRED_DRDY;
+				cdns3_start_all_request(priv_dev, priv_ep);
+			} else {
+				cdns3_rearm_transfer(priv_ep,
+						     priv_ep->wa1_set);
+			}
+		}
+	}
+
+	if ((ep_sts_reg & EP_STS_IOC) || (ep_sts_reg & EP_STS_ISP) ||
+	    (ep_sts_reg & EP_STS_IOT)) {
+		if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN) {
+			if (ep_sts_reg & EP_STS_ISP)
+				priv_ep->flags |= EP_QUIRK_END_TRANSFER;
+			else
+				priv_ep->flags &= ~EP_QUIRK_END_TRANSFER;
+		}
+
+		if (!priv_ep->use_streams) {
+			if ((ep_sts_reg & EP_STS_IOC) ||
+			    (ep_sts_reg & EP_STS_ISP)) {
+				cdns3_transfer_completed(priv_dev, priv_ep);
+			} else if ((priv_ep->flags & EP_TDLCHK_EN) &
+				   priv_ep->pending_tdl) {
+				/* handle IOT with pending tdl */
+				cdns3_reprogram_tdl(priv_ep);
+			}
+		} else if (priv_ep->dir == USB_DIR_OUT) {
+			priv_ep->ep_sts_pending |= ep_sts_reg;
+		} else if (ep_sts_reg & EP_STS_IOT) {
+			cdns3_transfer_completed(priv_dev, priv_ep);
+		}
+	}
+
+	/*
+	 * MD_EXIT interrupt sets when stream capable endpoint exits
+	 * from MOVE DATA state of Bulk IN/OUT stream protocol state machine
+	 */
+	if (priv_ep->dir == USB_DIR_OUT && (ep_sts_reg & EP_STS_MD_EXIT) &&
+	    (priv_ep->ep_sts_pending & EP_STS_IOT) && priv_ep->use_streams) {
+		priv_ep->ep_sts_pending = 0;
+		cdns3_transfer_completed(priv_dev, priv_ep);
+	}
+
+	/*
+	 * WA2: this condition should only be meet when
+	 * priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET or
+	 * priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN.
+	 * In other cases this interrupt will be disabled.
+	 */
+	if (ep_sts_reg & EP_STS_DESCMIS && priv_dev->dev_ver < DEV_VER_V2 &&
+	    !(priv_ep->flags & EP_STALLED))
+		cdns3_wa2_descmissing_packet(priv_ep);
+
+	return 0;
+}
+
+static void cdns3_disconnect_gadget(struct cdns3_device *priv_dev)
+{
+	if (priv_dev->gadget_driver && priv_dev->gadget_driver->disconnect)
+		priv_dev->gadget_driver->disconnect(&priv_dev->gadget);
+}
+
+/**
+ * cdns3_check_usb_interrupt_proceed - Processes interrupt related to device
+ * @priv_dev: extended gadget object
+ * @usb_ists: bitmap representation of device's reported interrupts
+ * (usb_ists register value)
+ */
+static void cdns3_check_usb_interrupt_proceed(struct cdns3_device *priv_dev,
+					      u32 usb_ists)
+__must_hold(&priv_dev->lock)
+{
+	int speed = 0;
+
+	trace_cdns3_usb_irq(priv_dev, usb_ists);
+	if (usb_ists & USB_ISTS_L1ENTI) {
+		/*
+		 * WORKAROUND: CDNS3 controller has issue with hardware resuming
+		 * from L1. To fix it, if any DMA transfer is pending driver
+		 * must starts driving resume signal immediately.
+		 */
+		if (readl(&priv_dev->regs->drbl))
+			__cdns3_gadget_wakeup(priv_dev);
+	}
+
+	/* Connection detected */
+	if (usb_ists & (USB_ISTS_CON2I | USB_ISTS_CONI)) {
+		speed = cdns3_get_speed(priv_dev);
+		priv_dev->gadget.speed = speed;
+		usb_gadget_set_state(&priv_dev->gadget, USB_STATE_POWERED);
+		cdns3_ep0_config(priv_dev);
+	}
+
+	/* Disconnection detected */
+	if (usb_ists & (USB_ISTS_DIS2I | USB_ISTS_DISI)) {
+		spin_unlock(&priv_dev->lock);
+		cdns3_disconnect_gadget(priv_dev);
+		spin_lock(&priv_dev->lock);
+		priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
+		usb_gadget_set_state(&priv_dev->gadget, USB_STATE_NOTATTACHED);
+		cdns3_hw_reset_eps_config(priv_dev);
+	}
+
+	if (usb_ists & (USB_ISTS_L2ENTI | USB_ISTS_U3ENTI)) {
+		if (priv_dev->gadget_driver &&
+		    priv_dev->gadget_driver->suspend) {
+			spin_unlock(&priv_dev->lock);
+			priv_dev->gadget_driver->suspend(&priv_dev->gadget);
+			spin_lock(&priv_dev->lock);
+		}
+	}
+
+	if (usb_ists & (USB_ISTS_L2EXTI | USB_ISTS_U3EXTI)) {
+		if (priv_dev->gadget_driver &&
+		    priv_dev->gadget_driver->resume) {
+			spin_unlock(&priv_dev->lock);
+			priv_dev->gadget_driver->resume(&priv_dev->gadget);
+			spin_lock(&priv_dev->lock);
+		}
+	}
+
+	/* reset*/
+	if (usb_ists & (USB_ISTS_UWRESI | USB_ISTS_UHRESI | USB_ISTS_U2RESI)) {
+		if (priv_dev->gadget_driver) {
+			spin_unlock(&priv_dev->lock);
+			usb_gadget_udc_reset(&priv_dev->gadget,
+					     priv_dev->gadget_driver);
+			spin_lock(&priv_dev->lock);
+
+			/*read again to check the actual speed*/
+			speed = cdns3_get_speed(priv_dev);
+			priv_dev->gadget.speed = speed;
+			cdns3_hw_reset_eps_config(priv_dev);
+			cdns3_ep0_config(priv_dev);
+		}
+	}
+}
+
+/**
+ * cdns3_device_irq_handler - interrupt handler for device part of controller
+ *
+ * @irq: irq number for cdns3 core device
+ * @data: structure of cdns3
+ *
+ * Returns IRQ_HANDLED or IRQ_NONE
+ */
+static irqreturn_t cdns3_device_irq_handler(int irq, void *data)
+{
+	struct cdns3_device *priv_dev = data;
+	struct cdns *cdns = dev_get_drvdata(priv_dev->dev);
+	irqreturn_t ret = IRQ_NONE;
+	u32 reg;
+
+	if (cdns->in_lpm)
+		return ret;
+
+	/* check USB device interrupt */
+	reg = readl(&priv_dev->regs->usb_ists);
+	if (reg) {
+		/* After masking interrupts the new interrupts won't be
+		 * reported in usb_ists/ep_ists. In order to not lose some
+		 * of them driver disables only detected interrupts.
+		 * They will be enabled ASAP after clearing source of
+		 * interrupt. This an unusual behavior only applies to
+		 * usb_ists register.
+		 */
+		reg = ~reg & readl(&priv_dev->regs->usb_ien);
+		/* mask deferred interrupt. */
+		writel(reg, &priv_dev->regs->usb_ien);
+		ret = IRQ_WAKE_THREAD;
+	}
+
+	/* check endpoint interrupt */
+	reg = readl(&priv_dev->regs->ep_ists);
+	if (reg) {
+		writel(0, &priv_dev->regs->ep_ien);
+		ret = IRQ_WAKE_THREAD;
+	}
+
+	return ret;
+}
+
+/**
+ * cdns3_device_thread_irq_handler - interrupt handler for device part
+ * of controller
+ *
+ * @irq: irq number for cdns3 core device
+ * @data: structure of cdns3
+ *
+ * Returns IRQ_HANDLED or IRQ_NONE
+ */
+static irqreturn_t cdns3_device_thread_irq_handler(int irq, void *data)
+{
+	struct cdns3_device *priv_dev = data;
+	irqreturn_t ret = IRQ_NONE;
+	unsigned long flags;
+	unsigned int bit;
+	unsigned long reg;
+
+	local_bh_disable();
+	spin_lock_irqsave(&priv_dev->lock, flags);
+
+	reg = readl(&priv_dev->regs->usb_ists);
+	if (reg) {
+		writel(reg, &priv_dev->regs->usb_ists);
+		writel(USB_IEN_INIT, &priv_dev->regs->usb_ien);
+		cdns3_check_usb_interrupt_proceed(priv_dev, reg);
+		ret = IRQ_HANDLED;
+	}
+
+	reg = readl(&priv_dev->regs->ep_ists);
+
+	/* handle default endpoint OUT */
+	if (reg & EP_ISTS_EP_OUT0) {
+		cdns3_check_ep0_interrupt_proceed(priv_dev, USB_DIR_OUT);
+		ret = IRQ_HANDLED;
+	}
+
+	/* handle default endpoint IN */
+	if (reg & EP_ISTS_EP_IN0) {
+		cdns3_check_ep0_interrupt_proceed(priv_dev, USB_DIR_IN);
+		ret = IRQ_HANDLED;
+	}
+
+	/* check if interrupt from non default endpoint, if no exit */
+	reg &= ~(EP_ISTS_EP_OUT0 | EP_ISTS_EP_IN0);
+	if (!reg)
+		goto irqend;
+
+	for_each_set_bit(bit, &reg,
+			 sizeof(u32) * BITS_PER_BYTE) {
+		cdns3_check_ep_interrupt_proceed(priv_dev->eps[bit]);
+		ret = IRQ_HANDLED;
+	}
+
+	if (priv_dev->dev_ver < DEV_VER_V2 && priv_dev->using_streams)
+		cdns3_wa2_check_outq_status(priv_dev);
+
+irqend:
+	writel(~0, &priv_dev->regs->ep_ien);
+	spin_unlock_irqrestore(&priv_dev->lock, flags);
+	local_bh_enable();
+
+	return ret;
+}
+
+/**
+ * cdns3_ep_onchip_buffer_reserve - Try to reserve onchip buf for EP
+ *
+ * The real reservation will occur during write to EP_CFG register,
+ * this function is used to check if the 'size' reservation is allowed.
+ *
+ * @priv_dev: extended gadget object
+ * @size: the size (KB) for EP would like to allocate
+ * @is_in: endpoint direction
+ *
+ * Return 0 if the required size can met or negative value on failure
+ */
+static int cdns3_ep_onchip_buffer_reserve(struct cdns3_device *priv_dev,
+					  int size, int is_in)
+{
+	int remained;
+
+	/* 2KB are reserved for EP0*/
+	remained = priv_dev->onchip_buffers - priv_dev->onchip_used_size - 2;
+
+	if (is_in) {
+		if (remained < size)
+			return -EPERM;
+
+		priv_dev->onchip_used_size += size;
+	} else {
+		int required;
+
+		/**
+		 *  ALL OUT EPs are shared the same chunk onchip memory, so
+		 * driver checks if it already has assigned enough buffers
+		 */
+		if (priv_dev->out_mem_is_allocated >= size)
+			return 0;
+
+		required = size - priv_dev->out_mem_is_allocated;
+
+		if (required > remained)
+			return -EPERM;
+
+		priv_dev->out_mem_is_allocated += required;
+		priv_dev->onchip_used_size += required;
+	}
+
+	return 0;
+}
+
+static void cdns3_configure_dmult(struct cdns3_device *priv_dev,
+				  struct cdns3_endpoint *priv_ep)
+{
+	struct cdns3_usb_regs __iomem *regs = priv_dev->regs;
+
+	/* For dev_ver > DEV_VER_V2 DMULT is configured per endpoint */
+	if (priv_dev->dev_ver <= DEV_VER_V2)
+		writel(USB_CONF_DMULT, &regs->usb_conf);
+
+	if (priv_dev->dev_ver == DEV_VER_V2)
+		writel(USB_CONF2_EN_TDL_TRB, &regs->usb_conf2);
+
+	if (priv_dev->dev_ver >= DEV_VER_V3 && priv_ep) {
+		u32 mask;
+
+		if (priv_ep->dir)
+			mask = BIT(priv_ep->num + 16);
+		else
+			mask = BIT(priv_ep->num);
+
+		if (priv_ep->type != USB_ENDPOINT_XFER_ISOC  && !priv_ep->dir) {
+			cdns3_set_register_bit(&regs->tdl_from_trb, mask);
+			cdns3_set_register_bit(&regs->tdl_beh, mask);
+			cdns3_set_register_bit(&regs->tdl_beh2, mask);
+			cdns3_set_register_bit(&regs->dma_adv_td, mask);
+		}
+
+		if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && !priv_ep->dir)
+			cdns3_set_register_bit(&regs->tdl_from_trb, mask);
+
+		cdns3_set_register_bit(&regs->dtrans, mask);
+	}
+}
+
+/**
+ * cdns3_ep_config - Configure hardware endpoint
+ * @priv_ep: extended endpoint object
+ * @enable: set EP_CFG_ENABLE bit in ep_cfg register.
+ */
+int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable)
+{
+	bool is_iso_ep = (priv_ep->type == USB_ENDPOINT_XFER_ISOC);
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+	u32 bEndpointAddress = priv_ep->num | priv_ep->dir;
+	u32 max_packet_size = priv_ep->wMaxPacketSize;
+	u8 maxburst = priv_ep->bMaxBurst;
+	u32 ep_cfg = 0;
+	u8 buffering;
+	int ret;
+
+	buffering = priv_dev->ep_buf_size - 1;
+
+	cdns3_configure_dmult(priv_dev, priv_ep);
+
+	switch (priv_ep->type) {
+	case USB_ENDPOINT_XFER_INT:
+		ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_INT);
+
+		if (priv_dev->dev_ver >= DEV_VER_V2 && !priv_ep->dir)
+			ep_cfg |= EP_CFG_TDL_CHK;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_BULK);
+
+		if (priv_dev->dev_ver >= DEV_VER_V2 && !priv_ep->dir)
+			ep_cfg |= EP_CFG_TDL_CHK;
+		break;
+	default:
+		ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_ISOC);
+		buffering = (priv_ep->bMaxBurst + 1) * (priv_ep->mult + 1) - 1;
+	}
+
+	switch (priv_dev->gadget.speed) {
+	case USB_SPEED_FULL:
+		max_packet_size = is_iso_ep ? 1023 : 64;
+		break;
+	case USB_SPEED_HIGH:
+		max_packet_size = is_iso_ep ? 1024 : 512;
+		break;
+	case USB_SPEED_SUPER:
+		if (priv_ep->type != USB_ENDPOINT_XFER_ISOC) {
+			max_packet_size = 1024;
+			maxburst = priv_dev->ep_buf_size - 1;
+		}
+		break;
+	default:
+		/* all other speed are not supported */
+		return -EINVAL;
+	}
+
+	if (max_packet_size == 1024)
+		priv_ep->trb_burst_size = 128;
+	else if (max_packet_size >= 512)
+		priv_ep->trb_burst_size = 64;
+	else
+		priv_ep->trb_burst_size = 16;
+
+	/*
+	 * In versions preceding DEV_VER_V2, for example, iMX8QM, there exit the bugs
+	 * in the DMA. These bugs occur when the trb_burst_size exceeds 16 and the
+	 * address is not aligned to 128 Bytes (which is a product of the 64-bit AXI
+	 * and AXI maximum burst length of 16 or 0xF+1, dma_axi_ctrl0[3:0]). This
+	 * results in data corruption when it crosses the 4K border. The corruption
+	 * specifically occurs from the position (4K - (address & 0x7F)) to 4K.
+	 *
+	 * So force trb_burst_size to 16 at such platform.
+	 */
+	if (priv_dev->dev_ver < DEV_VER_V2)
+		priv_ep->trb_burst_size = 16;
+
+	buffering = min_t(u8, buffering, EP_CFG_BUFFERING_MAX);
+	maxburst = min_t(u8, maxburst, EP_CFG_MAXBURST_MAX);
+
+	/* onchip buffer is only allocated before configuration */
+	if (!priv_dev->hw_configured_flag) {
+		ret = cdns3_ep_onchip_buffer_reserve(priv_dev, buffering + 1,
+						     !!priv_ep->dir);
+		if (ret) {
+			dev_err(priv_dev->dev, "onchip mem is full, ep is invalid\n");
+			return ret;
+		}
+	}
+
+	if (enable)
+		ep_cfg |= EP_CFG_ENABLE;
+
+	if (priv_ep->use_streams && priv_dev->gadget.speed >= USB_SPEED_SUPER) {
+		if (priv_dev->dev_ver >= DEV_VER_V3) {
+			u32 mask = BIT(priv_ep->num + (priv_ep->dir ? 16 : 0));
+
+			/*
+			 * Stream capable endpoints are handled by using ep_tdl
+			 * register. Other endpoints use TDL from TRB feature.
+			 */
+			cdns3_clear_register_bit(&priv_dev->regs->tdl_from_trb,
+						 mask);
+		}
+
+		/*  Enable Stream Bit TDL chk and SID chk */
+		ep_cfg |=  EP_CFG_STREAM_EN | EP_CFG_TDL_CHK | EP_CFG_SID_CHK;
+	}
+
+	ep_cfg |= EP_CFG_MAXPKTSIZE(max_packet_size) |
+		  EP_CFG_MULT(priv_ep->mult) |			/* must match EP setting */
+		  EP_CFG_BUFFERING(buffering) |
+		  EP_CFG_MAXBURST(maxburst);
+
+	cdns3_select_ep(priv_dev, bEndpointAddress);
+	writel(ep_cfg, &priv_dev->regs->ep_cfg);
+	priv_ep->flags |= EP_CONFIGURED;
+
+	dev_dbg(priv_dev->dev, "Configure %s: with val %08x\n",
+		priv_ep->name, ep_cfg);
+
+	return 0;
+}
+
+/* Find correct direction for HW endpoint according to description */
+static int cdns3_ep_dir_is_correct(struct usb_endpoint_descriptor *desc,
+				   struct cdns3_endpoint *priv_ep)
+{
+	return (priv_ep->endpoint.caps.dir_in && usb_endpoint_dir_in(desc)) ||
+	       (priv_ep->endpoint.caps.dir_out && usb_endpoint_dir_out(desc));
+}
+
+static struct
+cdns3_endpoint *cdns3_find_available_ep(struct cdns3_device *priv_dev,
+					struct usb_endpoint_descriptor *desc)
+{
+	struct usb_ep *ep;
+	struct cdns3_endpoint *priv_ep;
+
+	list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) {
+		unsigned long num;
+		int ret;
+		/* ep name pattern likes epXin or epXout */
+		char c[2] = {ep->name[2], '\0'};
+
+		ret = kstrtoul(c, 10, &num);
+		if (ret)
+			return ERR_PTR(ret);
+
+		priv_ep = ep_to_cdns3_ep(ep);
+		if (cdns3_ep_dir_is_correct(desc, priv_ep)) {
+			if (!(priv_ep->flags & EP_CLAIMED)) {
+				priv_ep->num  = num;
+				return priv_ep;
+			}
+		}
+	}
+
+	return ERR_PTR(-ENOENT);
+}
+
+/*
+ *  Cadence IP has one limitation that all endpoints must be configured
+ * (Type & MaxPacketSize) before setting configuration through hardware
+ * register, it means we can't change endpoints configuration after
+ * set_configuration.
+ *
+ * This function set EP_CLAIMED flag which is added when the gadget driver
+ * uses usb_ep_autoconfig to configure specific endpoint;
+ * When the udc driver receives set_configurion request,
+ * it goes through all claimed endpoints, and configure all endpoints
+ * accordingly.
+ *
+ * At usb_ep_ops.enable/disable, we only enable and disable endpoint through
+ * ep_cfg register which can be changed after set_configuration, and do
+ * some software operation accordingly.
+ */
+static struct
+usb_ep *cdns3_gadget_match_ep(struct usb_gadget *gadget,
+			      struct usb_endpoint_descriptor *desc,
+			      struct usb_ss_ep_comp_descriptor *comp_desc)
+{
+	struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
+	struct cdns3_endpoint *priv_ep;
+	unsigned long flags;
+
+	priv_ep = cdns3_find_available_ep(priv_dev, desc);
+	if (IS_ERR(priv_ep)) {
+		dev_err(priv_dev->dev, "no available ep\n");
+		return NULL;
+	}
+
+	dev_dbg(priv_dev->dev, "match endpoint: %s\n", priv_ep->name);
+
+	spin_lock_irqsave(&priv_dev->lock, flags);
+	priv_ep->endpoint.desc = desc;
+	priv_ep->dir  = usb_endpoint_dir_in(desc) ? USB_DIR_IN : USB_DIR_OUT;
+	priv_ep->type = usb_endpoint_type(desc);
+	priv_ep->flags |= EP_CLAIMED;
+	priv_ep->interval = desc->bInterval ? BIT(desc->bInterval - 1) : 0;
+	priv_ep->wMaxPacketSize =  usb_endpoint_maxp(desc);
+	priv_ep->mult = USB_EP_MAXP_MULT(priv_ep->wMaxPacketSize);
+	priv_ep->wMaxPacketSize &= USB_ENDPOINT_MAXP_MASK;
+	if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && comp_desc) {
+		priv_ep->mult =  USB_SS_MULT(comp_desc->bmAttributes) - 1;
+		priv_ep->bMaxBurst = comp_desc->bMaxBurst;
+	}
+
+	spin_unlock_irqrestore(&priv_dev->lock, flags);
+	return &priv_ep->endpoint;
+}
+
+/**
+ * cdns3_gadget_ep_alloc_request - Allocates request
+ * @ep: endpoint object associated with request
+ * @gfp_flags: gfp flags
+ *
+ * Returns allocated request address, NULL on allocation error
+ */
+struct usb_request *cdns3_gadget_ep_alloc_request(struct usb_ep *ep,
+						  gfp_t gfp_flags)
+{
+	struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
+	struct cdns3_request *priv_req;
+
+	priv_req = kzalloc_obj(*priv_req, gfp_flags);
+	if (!priv_req)
+		return NULL;
+
+	priv_req->priv_ep = priv_ep;
+
+	trace_cdns3_alloc_request(priv_req);
+	return &priv_req->request;
+}
+
+/**
+ * cdns3_gadget_ep_free_request - Free memory occupied by request
+ * @ep: endpoint object associated with request
+ * @request: request to free memory
+ */
+void cdns3_gadget_ep_free_request(struct usb_ep *ep,
+				  struct usb_request *request)
+{
+	struct cdns3_request *priv_req = to_cdns3_request(request);
+
+	if (priv_req->aligned_buf)
+		priv_req->aligned_buf->in_use = 0;
+
+	trace_cdns3_free_request(priv_req);
+	kfree(priv_req);
+}
+
+/**
+ * cdns3_gadget_ep_enable - Enable endpoint
+ * @ep: endpoint object
+ * @desc: endpoint descriptor
+ *
+ * Returns 0 on success, error code elsewhere
+ */
+static int cdns3_gadget_ep_enable(struct usb_ep *ep,
+				  const struct usb_endpoint_descriptor *desc)
+{
+	struct cdns3_endpoint *priv_ep;
+	struct cdns3_device *priv_dev;
+	const struct usb_ss_ep_comp_descriptor *comp_desc;
+	u32 reg = EP_STS_EN_TRBERREN;
+	u32 bEndpointAddress;
+	unsigned long flags;
+	int enable = 1;
+	int ret = 0;
+	int val;
+
+	if (!ep) {
+		pr_debug("usbss: ep not configured?\n");
+		return -EINVAL;
+	}
+
+	priv_ep = ep_to_cdns3_ep(ep);
+	priv_dev = priv_ep->cdns3_dev;
+	comp_desc = priv_ep->endpoint.comp_desc;
+
+	if (!desc || desc->bDescriptorType != USB_DT_ENDPOINT) {
+		dev_dbg(priv_dev->dev, "usbss: invalid parameters\n");
+		return -EINVAL;
+	}
+
+	if (!desc->wMaxPacketSize) {
+		dev_err(priv_dev->dev, "usbss: missing wMaxPacketSize\n");
+		return -EINVAL;
+	}
+
+	if (dev_WARN_ONCE(priv_dev->dev, priv_ep->flags & EP_ENABLED,
+			  "%s is already enabled\n", priv_ep->name))
+		return 0;
+
+	spin_lock_irqsave(&priv_dev->lock, flags);
+
+	priv_ep->endpoint.desc = desc;
+	priv_ep->type = usb_endpoint_type(desc);
+	priv_ep->interval = desc->bInterval ? BIT(desc->bInterval - 1) : 0;
+
+	if (priv_ep->interval > ISO_MAX_INTERVAL &&
+	    priv_ep->type == USB_ENDPOINT_XFER_ISOC) {
+		dev_err(priv_dev->dev, "Driver is limited to %d period\n",
+			ISO_MAX_INTERVAL);
+
+		ret =  -EINVAL;
+		goto exit;
+	}
+
+	bEndpointAddress = priv_ep->num | priv_ep->dir;
+	cdns3_select_ep(priv_dev, bEndpointAddress);
+
+	/*
+	 * For some versions of controller at some point during ISO OUT traffic
+	 * DMA reads Transfer Ring for the EP which has never got doorbell.
+	 * This issue was detected only on simulation, but to avoid this issue
+	 * driver add protection against it. To fix it driver enable ISO OUT
+	 * endpoint before setting DRBL. This special treatment of ISO OUT
+	 * endpoints are recommended by controller specification.
+	 */
+	if (priv_ep->type == USB_ENDPOINT_XFER_ISOC  && !priv_ep->dir)
+		enable = 0;
+
+	if (usb_ss_max_streams(comp_desc) && usb_endpoint_xfer_bulk(desc)) {
+		/*
+		 * Enable stream support (SS mode) related interrupts
+		 * in EP_STS_EN Register
+		 */
+		if (priv_dev->gadget.speed >= USB_SPEED_SUPER) {
+			reg |= EP_STS_EN_IOTEN | EP_STS_EN_PRIMEEEN |
+				EP_STS_EN_SIDERREN | EP_STS_EN_MD_EXITEN |
+				EP_STS_EN_STREAMREN;
+			priv_ep->use_streams = true;
+			ret = cdns3_ep_config(priv_ep, enable);
+			priv_dev->using_streams |= true;
+		}
+	} else {
+		ret = cdns3_ep_config(priv_ep, enable);
+	}
+
+	if (ret)
+		goto exit;
+
+	ret = cdns3_allocate_trb_pool(priv_ep);
+	if (ret)
+		goto exit;
+
+	bEndpointAddress = priv_ep->num | priv_ep->dir;
+	cdns3_select_ep(priv_dev, bEndpointAddress);
+
+	trace_cdns3_gadget_ep_enable(priv_ep);
+
+	writel(EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
+
+	ret = readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,
+					!(val & (EP_CMD_CSTALL | EP_CMD_EPRST)),
+					1, 1000);
+
+	if (unlikely(ret)) {
+		cdns3_free_trb_pool(priv_ep);
+		ret =  -EINVAL;
+		goto exit;
+	}
+
+	/* enable interrupt for selected endpoint */
+	cdns3_set_register_bit(&priv_dev->regs->ep_ien,
+			       BIT(cdns3_ep_addr_to_index(bEndpointAddress)));
+
+	if (priv_dev->dev_ver < DEV_VER_V2)
+		cdns3_wa2_enable_detection(priv_dev, priv_ep, reg);
+
+	writel(reg, &priv_dev->regs->ep_sts_en);
+
+	ep->desc = desc;
+	priv_ep->flags &= ~(EP_PENDING_REQUEST | EP_STALLED | EP_STALL_PENDING |
+			    EP_QUIRK_ISO_OUT_EN | EP_QUIRK_EXTRA_BUF_EN);
+	priv_ep->flags |= EP_ENABLED | EP_UPDATE_EP_TRBADDR;
+	priv_ep->wa1_set = 0;
+	priv_ep->enqueue = 0;
+	priv_ep->dequeue = 0;
+	reg = readl(&priv_dev->regs->ep_sts);
+	priv_ep->pcs = !!EP_STS_CCS(reg);
+	priv_ep->ccs = !!EP_STS_CCS(reg);
+	/* one TRB is reserved for link TRB used in DMULT mode*/
+	priv_ep->free_trbs = priv_ep->num_trbs - 1;
+exit:
+	spin_unlock_irqrestore(&priv_dev->lock, flags);
+
+	return ret;
+}
+
+/**
+ * cdns3_gadget_ep_disable - Disable endpoint
+ * @ep: endpoint object
+ *
+ * Returns 0 on success, error code elsewhere
+ */
+static int cdns3_gadget_ep_disable(struct usb_ep *ep)
+{
+	struct cdns3_endpoint *priv_ep;
+	struct cdns3_request *priv_req;
+	struct cdns3_device *priv_dev;
+	struct usb_request *request;
+	unsigned long flags;
+	int ret = 0;
+	u32 ep_cfg;
+	int val;
+
+	if (!ep) {
+		pr_err("usbss: invalid parameters\n");
+		return -EINVAL;
+	}
+
+	priv_ep = ep_to_cdns3_ep(ep);
+	priv_dev = priv_ep->cdns3_dev;
+
+	if (dev_WARN_ONCE(priv_dev->dev, !(priv_ep->flags & EP_ENABLED),
+			  "%s is already disabled\n", priv_ep->name))
+		return 0;
+
+	spin_lock_irqsave(&priv_dev->lock, flags);
+
+	trace_cdns3_gadget_ep_disable(priv_ep);
+
+	cdns3_select_ep(priv_dev, ep->desc->bEndpointAddress);
+
+	ep_cfg = readl(&priv_dev->regs->ep_cfg);
+	ep_cfg &= ~EP_CFG_ENABLE;
+	writel(ep_cfg, &priv_dev->regs->ep_cfg);
+
+	/**
+	 * Driver needs some time before resetting endpoint.
+	 * It need waits for clearing DBUSY bit or for timeout expired.
+	 * 10us is enough time for controller to stop transfer.
+	 */
+	readl_poll_timeout_atomic(&priv_dev->regs->ep_sts, val,
+				  !(val & EP_STS_DBUSY), 1, 10);
+	writel(EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
+
+	readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,
+				  !(val & (EP_CMD_CSTALL | EP_CMD_EPRST)),
+				  1, 1000);
+	if (unlikely(ret))
+		dev_err(priv_dev->dev, "Timeout: %s resetting failed.\n",
+			priv_ep->name);
+
+	while (!list_empty(&priv_ep->pending_req_list)) {
+		request = cdns3_next_request(&priv_ep->pending_req_list);
+
+		cdns3_gadget_giveback(priv_ep, to_cdns3_request(request),
+				      -ESHUTDOWN);
+	}
+
+	while (!list_empty(&priv_ep->wa2_descmiss_req_list)) {
+		priv_req = cdns3_next_priv_request(&priv_ep->wa2_descmiss_req_list);
+		list_del_init(&priv_req->list);
+
+		kfree(priv_req->request.buf);
+		cdns3_gadget_ep_free_request(&priv_ep->endpoint,
+					     &priv_req->request);
+		--priv_ep->wa2_counter;
+	}
+
+	while (!list_empty(&priv_ep->deferred_req_list)) {
+		request = cdns3_next_request(&priv_ep->deferred_req_list);
+
+		cdns3_gadget_giveback(priv_ep, to_cdns3_request(request),
+				      -ESHUTDOWN);
+	}
+
+	priv_ep->descmis_req = NULL;
+
+	ep->desc = NULL;
+	priv_ep->flags &= ~EP_ENABLED;
+	priv_ep->use_streams = false;
+
+	spin_unlock_irqrestore(&priv_dev->lock, flags);
+
+	return ret;
+}
+
+/**
+ * __cdns3_gadget_ep_queue - Transfer data on endpoint
+ * @ep: endpoint object
+ * @request: request object
+ * @gfp_flags: gfp flags
+ *
+ * Returns 0 on success, error code elsewhere
+ */
+static int __cdns3_gadget_ep_queue(struct usb_ep *ep,
+				   struct usb_request *request,
+				   gfp_t gfp_flags)
+{
+	struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+	struct cdns3_request *priv_req;
+	int ret = 0;
+
+	if (!ep->desc)
+		return -ESHUTDOWN;
+
+	request->actual = 0;
+	request->status = -EINPROGRESS;
+	priv_req = to_cdns3_request(request);
+	trace_cdns3_ep_queue(priv_req);
+
+	if (priv_dev->dev_ver < DEV_VER_V2) {
+		ret = cdns3_wa2_gadget_ep_queue(priv_dev, priv_ep,
+						priv_req);
+
+		if (ret == EINPROGRESS)
+			return 0;
+	}
+
+	ret = cdns3_prepare_aligned_request_buf(priv_req);
+	if (ret < 0)
+		return ret;
+
+	if (likely(!(priv_req->flags & REQUEST_UNALIGNED))) {
+		ret = usb_gadget_map_request_by_dev(priv_dev->sysdev, request,
+					    usb_endpoint_dir_in(ep->desc));
+		if (ret)
+			return ret;
+	}
+
+	list_add_tail(&request->list, &priv_ep->deferred_req_list);
+
+	/*
+	 * For stream capable endpoint if prime irq flag is set then only start
+	 * request.
+	 * If hardware endpoint configuration has not been set yet then
+	 * just queue request in deferred list. Transfer will be started in
+	 * cdns3_set_hw_configuration.
+	 */
+	if (!request->stream_id) {
+		if (priv_dev->hw_configured_flag &&
+		    !(priv_ep->flags & EP_STALLED) &&
+		    !(priv_ep->flags & EP_STALL_PENDING))
+			cdns3_start_all_request(priv_dev, priv_ep);
+	} else {
+		if (priv_dev->hw_configured_flag && priv_ep->prime_flag)
+			cdns3_start_all_request(priv_dev, priv_ep);
+	}
+
+	return 0;
+}
+
+static int cdns3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
+				 gfp_t gfp_flags)
+{
+	struct usb_request *zlp_request;
+	struct cdns3_endpoint *priv_ep;
+	struct cdns3_device *priv_dev;
+	unsigned long flags;
+	int ret;
+
+	if (!request || !ep)
+		return -EINVAL;
+
+	priv_ep = ep_to_cdns3_ep(ep);
+	priv_dev = priv_ep->cdns3_dev;
+
+	spin_lock_irqsave(&priv_dev->lock, flags);
+
+	ret = __cdns3_gadget_ep_queue(ep, request, gfp_flags);
+
+	if (ret == 0 && request->zero && request->length &&
+	    (request->length % ep->maxpacket == 0)) {
+		struct cdns3_request *priv_req;
+
+		zlp_request = cdns3_gadget_ep_alloc_request(ep, GFP_ATOMIC);
+		zlp_request->buf = priv_dev->zlp_buf;
+		zlp_request->length = 0;
+
+		priv_req = to_cdns3_request(zlp_request);
+		priv_req->flags |= REQUEST_ZLP;
+
+		dev_dbg(priv_dev->dev, "Queuing ZLP for endpoint: %s\n",
+			priv_ep->name);
+		ret = __cdns3_gadget_ep_queue(ep, zlp_request, gfp_flags);
+	}
+
+	spin_unlock_irqrestore(&priv_dev->lock, flags);
+	return ret;
+}
+
+/**
+ * cdns3_gadget_ep_dequeue - Remove request from transfer queue
+ * @ep: endpoint object associated with request
+ * @request: request object
+ *
+ * Returns 0 on success, error code elsewhere
+ */
+int cdns3_gadget_ep_dequeue(struct usb_ep *ep,
+			    struct usb_request *request)
+{
+	struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
+	struct cdns3_device *priv_dev;
+	struct usb_request *req, *req_temp;
+	struct cdns3_request *priv_req;
+	struct cdns3_trb *link_trb;
+	u8 req_on_hw_ring = 0;
+	unsigned long flags;
+	int ret = 0;
+	int val;
+
+	if (!ep || !request || !ep->desc)
+		return -EINVAL;
+
+	priv_dev = priv_ep->cdns3_dev;
+
+	spin_lock_irqsave(&priv_dev->lock, flags);
+
+	priv_req = to_cdns3_request(request);
+
+	trace_cdns3_ep_dequeue(priv_req);
+
+	cdns3_select_ep(priv_dev, ep->desc->bEndpointAddress);
+
+	list_for_each_entry_safe(req, req_temp, &priv_ep->pending_req_list,
+				 list) {
+		if (request == req) {
+			req_on_hw_ring = 1;
+			goto found;
+		}
+	}
+
+	list_for_each_entry_safe(req, req_temp, &priv_ep->deferred_req_list,
+				 list) {
+		if (request == req)
+			goto found;
+	}
+
+	goto not_found;
+
+found:
+	link_trb = priv_req->trb;
+
+	/* Update ring only if removed request is on pending_req_list list */
+	if (req_on_hw_ring && link_trb) {
+		/* Stop DMA */
+		writel(EP_CMD_DFLUSH, &priv_dev->regs->ep_cmd);
+
+		/* wait for DFLUSH cleared */
+		readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,
+					  !(val & EP_CMD_DFLUSH), 1, 1000);
+
+		link_trb->buffer = cpu_to_le32(TRB_BUFFER(priv_ep->trb_pool_dma +
+			((priv_req->end_trb + 1) * TRB_SIZE)));
+		link_trb->control = cpu_to_le32((le32_to_cpu(link_trb->control) & TRB_CYCLE) |
+				    TRB_TYPE(TRB_LINK) | TRB_CHAIN);
+
+		if (priv_ep->wa1_trb == priv_req->trb)
+			cdns3_wa1_restore_cycle_bit(priv_ep);
+	}
+
+	cdns3_gadget_giveback(priv_ep, priv_req, -ECONNRESET);
+
+	req = cdns3_next_request(&priv_ep->pending_req_list);
+	if (req)
+		cdns3_rearm_transfer(priv_ep, 1);
+
+not_found:
+	spin_unlock_irqrestore(&priv_dev->lock, flags);
+	return ret;
+}
+
+/**
+ * __cdns3_gadget_ep_set_halt - Sets stall on selected endpoint
+ * Should be called after acquiring spin_lock and selecting ep
+ * @priv_ep: endpoint object to set stall on.
+ */
+void __cdns3_gadget_ep_set_halt(struct cdns3_endpoint *priv_ep)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+
+	trace_cdns3_halt(priv_ep, 1, 0);
+
+	if (!(priv_ep->flags & EP_STALLED)) {
+		u32 ep_sts_reg = readl(&priv_dev->regs->ep_sts);
+
+		if (!(ep_sts_reg & EP_STS_DBUSY))
+			cdns3_ep_stall_flush(priv_ep);
+		else
+			priv_ep->flags |= EP_STALL_PENDING;
+	}
+}
+
+/**
+ * __cdns3_gadget_ep_clear_halt - Clears stall on selected endpoint
+ * Should be called after acquiring spin_lock and selecting ep
+ * @priv_ep: endpoint object to clear stall on
+ */
+int __cdns3_gadget_ep_clear_halt(struct cdns3_endpoint *priv_ep)
+{
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+	struct usb_request *request;
+	struct cdns3_request *priv_req;
+	struct cdns3_trb *trb = NULL;
+	struct cdns3_trb trb_tmp;
+	int ret;
+	int val;
+
+	trace_cdns3_halt(priv_ep, 0, 0);
+
+	request = cdns3_next_request(&priv_ep->pending_req_list);
+	if (request) {
+		priv_req = to_cdns3_request(request);
+		trb = priv_req->trb;
+		if (trb) {
+			trb_tmp = *trb;
+			trb->control = trb->control ^ cpu_to_le32(TRB_CYCLE);
+		}
+	}
+
+	writel(EP_CMD_CSTALL | EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
+
+	/* wait for EPRST cleared */
+	ret = readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,
+					!(val & EP_CMD_EPRST), 1, 100);
+	if (ret)
+		return -EINVAL;
+
+	priv_ep->flags &= ~(EP_STALLED | EP_STALL_PENDING);
+
+	if (request) {
+		if (trb) {
+			*trb = trb_tmp;
+
+			/*
+			 * Per datasheet, EPRST causes DMA to reposition to the next TD.
+			 * Manually reset EP_TRADDR to the current TRB to prevent
+			 * the hardware from skipping the interrupted request.
+			 */
+			writel(EP_TRADDR_TRADDR(priv_ep->trb_pool_dma +
+						priv_req->start_trb * TRB_SIZE),
+						&priv_dev->regs->ep_traddr);
+		}
+
+		cdns3_rearm_transfer(priv_ep, 1);
+	}
+
+	cdns3_start_all_request(priv_dev, priv_ep);
+	return ret;
+}
+
+/**
+ * cdns3_gadget_ep_set_halt - Sets/clears stall on selected endpoint
+ * @ep: endpoint object to set/clear stall on
+ * @value: 1 for set stall, 0 for clear stall
+ *
+ * Returns 0 on success, error code elsewhere
+ */
+int cdns3_gadget_ep_set_halt(struct usb_ep *ep, int value)
+{
+	struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
+	struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+	unsigned long flags;
+	int ret = 0;
+
+	if (!(priv_ep->flags & EP_ENABLED))
+		return -EPERM;
+
+	spin_lock_irqsave(&priv_dev->lock, flags);
+
+	cdns3_select_ep(priv_dev, ep->desc->bEndpointAddress);
+
+	if (!value) {
+		priv_ep->flags &= ~EP_WEDGE;
+		ret = __cdns3_gadget_ep_clear_halt(priv_ep);
+	} else {
+		__cdns3_gadget_ep_set_halt(priv_ep);
+	}
+
+	spin_unlock_irqrestore(&priv_dev->lock, flags);
+
+	return ret;
+}
+
+extern const struct usb_ep_ops cdns3_gadget_ep0_ops;
+
+static const struct usb_ep_ops cdns3_gadget_ep_ops = {
+	.enable = cdns3_gadget_ep_enable,
+	.disable = cdns3_gadget_ep_disable,
+	.alloc_request = cdns3_gadget_ep_alloc_request,
+	.free_request = cdns3_gadget_ep_free_request,
+	.queue = cdns3_gadget_ep_queue,
+	.dequeue = cdns3_gadget_ep_dequeue,
+	.set_halt = cdns3_gadget_ep_set_halt,
+	.set_wedge = cdns3_gadget_ep_set_wedge,
+};
+
+/**
+ * cdns3_gadget_get_frame - Returns number of actual ITP frame
+ * @gadget: gadget object
+ *
+ * Returns number of actual ITP frame
+ */
+static int cdns3_gadget_get_frame(struct usb_gadget *gadget)
+{
+	struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
+
+	return readl(&priv_dev->regs->usb_itpn);
+}
+
+int __cdns3_gadget_wakeup(struct cdns3_device *priv_dev)
+{
+	enum usb_device_speed speed;
+
+	speed = cdns3_get_speed(priv_dev);
+
+	if (speed >= USB_SPEED_SUPER)
+		return 0;
+
+	/* Start driving resume signaling to indicate remote wakeup. */
+	writel(USB_CONF_LGO_L0, &priv_dev->regs->usb_conf);
+
+	return 0;
+}
+
+static int cdns3_gadget_wakeup(struct usb_gadget *gadget)
+{
+	struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&priv_dev->lock, flags);
+	ret = __cdns3_gadget_wakeup(priv_dev);
+	spin_unlock_irqrestore(&priv_dev->lock, flags);
+	return ret;
+}
+
+static int cdns3_gadget_set_selfpowered(struct usb_gadget *gadget,
+					int is_selfpowered)
+{
+	struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv_dev->lock, flags);
+	priv_dev->is_selfpowered = !!is_selfpowered;
+	spin_unlock_irqrestore(&priv_dev->lock, flags);
+	return 0;
+}
+
+static int cdns3_gadget_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
+
+	if (is_on) {
+		writel(USB_CONF_DEVEN, &priv_dev->regs->usb_conf);
+	} else {
+		writel(~0, &priv_dev->regs->ep_ists);
+		writel(~0, &priv_dev->regs->usb_ists);
+		writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf);
+	}
+
+	return 0;
+}
+
+static void cdns3_gadget_config(struct cdns3_device *priv_dev)
+{
+	struct cdns3_usb_regs __iomem *regs = priv_dev->regs;
+	u32 reg;
+
+	cdns3_ep0_config(priv_dev);
+
+	/* enable interrupts for endpoint 0 (in and out) */
+	writel(EP_IEN_EP_OUT0 | EP_IEN_EP_IN0, &regs->ep_ien);
+
+	/*
+	 * Driver needs to modify LFPS minimal U1 Exit time for DEV_VER_TI_V1
+	 * revision of controller.
+	 */
+	if (priv_dev->dev_ver == DEV_VER_TI_V1) {
+		reg = readl(&regs->dbg_link1);
+
+		reg &= ~DBG_LINK1_LFPS_MIN_GEN_U1_EXIT_MASK;
+		reg |= DBG_LINK1_LFPS_MIN_GEN_U1_EXIT(0x55) |
+		       DBG_LINK1_LFPS_MIN_GEN_U1_EXIT_SET;
+		writel(reg, &regs->dbg_link1);
+	}
+
+	/*
+	 * By default some platforms has set protected access to memory.
+	 * This cause problem with cache, so driver restore non-secure
+	 * access to memory.
+	 */
+	reg = readl(&regs->dma_axi_ctrl);
+	reg |= DMA_AXI_CTRL_MARPROT(DMA_AXI_CTRL_NON_SECURE) |
+	       DMA_AXI_CTRL_MAWPROT(DMA_AXI_CTRL_NON_SECURE);
+	writel(reg, &regs->dma_axi_ctrl);
+
+	/* enable generic interrupt*/
+	writel(USB_IEN_INIT, &regs->usb_ien);
+	writel(USB_CONF_CLK2OFFDS | USB_CONF_L1DS, &regs->usb_conf);
+	/*  keep Fast Access bit */
+	writel(PUSB_PWR_FST_REG_ACCESS, &priv_dev->regs->usb_pwr);
+
+	cdns3_configure_dmult(priv_dev, NULL);
+}
+
+/**
+ * cdns3_gadget_udc_start - Gadget start
+ * @gadget: gadget object
+ * @driver: driver which operates on this gadget
+ *
+ * Returns 0 on success, error code elsewhere
+ */
+static int cdns3_gadget_udc_start(struct usb_gadget *gadget,
+				  struct usb_gadget_driver *driver)
+{
+	struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
+	unsigned long flags;
+	enum usb_device_speed max_speed = driver->max_speed;
+
+	spin_lock_irqsave(&priv_dev->lock, flags);
+	priv_dev->gadget_driver = driver;
+
+	/* limit speed if necessary */
+	max_speed = min(driver->max_speed, gadget->max_speed);
+
+	switch (max_speed) {
+	case USB_SPEED_FULL:
+		writel(USB_CONF_SFORCE_FS, &priv_dev->regs->usb_conf);
+		writel(USB_CONF_USB3DIS, &priv_dev->regs->usb_conf);
+		break;
+	case USB_SPEED_HIGH:
+		writel(USB_CONF_USB3DIS, &priv_dev->regs->usb_conf);
+		break;
+	case USB_SPEED_SUPER:
+		break;
+	default:
+		dev_err(priv_dev->dev,
+			"invalid maximum_speed parameter %d\n",
+			max_speed);
+		fallthrough;
+	case USB_SPEED_UNKNOWN:
+		/* default to superspeed */
+		max_speed = USB_SPEED_SUPER;
+		break;
+	}
+
+	cdns3_gadget_config(priv_dev);
+	spin_unlock_irqrestore(&priv_dev->lock, flags);
+	return 0;
+}
+
+/**
+ * cdns3_gadget_udc_stop - Stops gadget
+ * @gadget: gadget object
+ *
+ * Returns 0
+ */
+static int cdns3_gadget_udc_stop(struct usb_gadget *gadget)
+{
+	struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
+	struct cdns3_endpoint *priv_ep;
+	u32 bEndpointAddress;
+	struct usb_ep *ep;
+	int val;
+
+	priv_dev->gadget_driver = NULL;
+
+	priv_dev->onchip_used_size = 0;
+	priv_dev->out_mem_is_allocated = 0;
+	priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
+
+	list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) {
+		priv_ep = ep_to_cdns3_ep(ep);
+		bEndpointAddress = priv_ep->num | priv_ep->dir;
+		cdns3_select_ep(priv_dev, bEndpointAddress);
+		writel(EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
+		readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,
+					  !(val & EP_CMD_EPRST), 1, 100);
+
+		priv_ep->flags &= ~EP_CLAIMED;
+	}
+
+	/* disable interrupt for device */
+	writel(0, &priv_dev->regs->usb_ien);
+	writel(0, &priv_dev->regs->usb_pwr);
+	writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf);
+
+	return 0;
+}
+
+/**
+ * cdns3_gadget_check_config - ensure cdns3 can support the USB configuration
+ * @gadget: pointer to the USB gadget
+ *
+ * Used to record the maximum number of endpoints being used in a USB composite
+ * device. (across all configurations)  This is to be used in the calculation
+ * of the TXFIFO sizes when resizing internal memory for individual endpoints.
+ * It will help ensured that the resizing logic reserves enough space for at
+ * least one max packet.
+ */
+static int cdns3_gadget_check_config(struct usb_gadget *gadget)
+{
+	struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
+	struct cdns3_endpoint *priv_ep;
+	struct usb_ep *ep;
+	int n_in = 0;
+	int iso = 0;
+	int out = 1;
+	int total;
+	int n;
+
+	list_for_each_entry(ep, &gadget->ep_list, ep_list) {
+		priv_ep = ep_to_cdns3_ep(ep);
+		if (!(priv_ep->flags & EP_CLAIMED))
+			continue;
+
+		n = (priv_ep->mult + 1) * (priv_ep->bMaxBurst + 1);
+		if (ep->address & USB_DIR_IN) {
+			/*
+			 * ISO transfer: DMA start move data when get ISO, only transfer
+			 * data as min(TD size, iso). No benefit for allocate bigger
+			 * internal memory than 'iso'.
+			 */
+			if (priv_ep->type == USB_ENDPOINT_XFER_ISOC)
+				iso += n;
+			else
+				n_in++;
+		} else {
+			if (priv_ep->type == USB_ENDPOINT_XFER_ISOC)
+				out = max_t(int, out, n);
+		}
+	}
+
+	/* 2KB are reserved for EP0, 1KB for out*/
+	total = 2 + n_in + out + iso;
+
+	if (total > priv_dev->onchip_buffers)
+		return -ENOMEM;
+
+	priv_dev->ep_buf_size = (priv_dev->onchip_buffers - 2 - iso) / (n_in + out);
+
+	return 0;
+}
+
+static const struct usb_gadget_ops cdns3_gadget_ops = {
+	.get_frame = cdns3_gadget_get_frame,
+	.wakeup = cdns3_gadget_wakeup,
+	.set_selfpowered = cdns3_gadget_set_selfpowered,
+	.pullup = cdns3_gadget_pullup,
+	.udc_start = cdns3_gadget_udc_start,
+	.udc_stop = cdns3_gadget_udc_stop,
+	.match_ep = cdns3_gadget_match_ep,
+	.check_config = cdns3_gadget_check_config,
+};
+
+static void cdns3_free_all_eps(struct cdns3_device *priv_dev)
+{
+	int i;
+
+	/* ep0 OUT point to ep0 IN. */
+	priv_dev->eps[16] = NULL;
+
+	for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++)
+		if (priv_dev->eps[i]) {
+			cdns3_free_trb_pool(priv_dev->eps[i]);
+			devm_kfree(priv_dev->dev, priv_dev->eps[i]);
+		}
+}
+
+/**
+ * cdns3_init_eps - Initializes software endpoints of gadget
+ * @priv_dev: extended gadget object
+ *
+ * Returns 0 on success, error code elsewhere
+ */
+static int cdns3_init_eps(struct cdns3_device *priv_dev)
+{
+	u32 ep_enabled_reg, iso_ep_reg;
+	struct cdns3_endpoint *priv_ep;
+	int ep_dir, ep_number;
+	u32 ep_mask;
+	int ret = 0;
+	int i;
+
+	/* Read it from USB_CAP3 to USB_CAP5 */
+	ep_enabled_reg = readl(&priv_dev->regs->usb_cap3);
+	iso_ep_reg = readl(&priv_dev->regs->usb_cap4);
+
+	dev_dbg(priv_dev->dev, "Initializing non-zero endpoints\n");
+
+	for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++) {
+		ep_dir = i >> 4;	/* i div 16 */
+		ep_number = i & 0xF;	/* i % 16 */
+		ep_mask = BIT(i);
+
+		if (!(ep_enabled_reg & ep_mask))
+			continue;
+
+		if (ep_dir && !ep_number) {
+			priv_dev->eps[i] = priv_dev->eps[0];
+			continue;
+		}
+
+		priv_ep = devm_kzalloc(priv_dev->dev, sizeof(*priv_ep),
+				       GFP_KERNEL);
+		if (!priv_ep)
+			goto err;
+
+		/* set parent of endpoint object */
+		priv_ep->cdns3_dev = priv_dev;
+		priv_dev->eps[i] = priv_ep;
+		priv_ep->num = ep_number;
+		priv_ep->dir = ep_dir ? USB_DIR_IN : USB_DIR_OUT;
+
+		if (!ep_number) {
+			ret = cdns3_init_ep0(priv_dev, priv_ep);
+			if (ret) {
+				dev_err(priv_dev->dev, "Failed to init ep0\n");
+				goto err;
+			}
+		} else {
+			snprintf(priv_ep->name, sizeof(priv_ep->name), "ep%d%s",
+				 ep_number, !!ep_dir ? "in" : "out");
+			priv_ep->endpoint.name = priv_ep->name;
+
+			usb_ep_set_maxpacket_limit(&priv_ep->endpoint,
+						   CDNS3_EP_MAX_PACKET_LIMIT);
+			priv_ep->endpoint.max_streams = CDNS3_EP_MAX_STREAMS;
+			priv_ep->endpoint.ops = &cdns3_gadget_ep_ops;
+			if (ep_dir)
+				priv_ep->endpoint.caps.dir_in = 1;
+			else
+				priv_ep->endpoint.caps.dir_out = 1;
+
+			if (iso_ep_reg & ep_mask)
+				priv_ep->endpoint.caps.type_iso = 1;
+
+			priv_ep->endpoint.caps.type_bulk = 1;
+			priv_ep->endpoint.caps.type_int = 1;
+
+			list_add_tail(&priv_ep->endpoint.ep_list,
+				      &priv_dev->gadget.ep_list);
+		}
+
+		priv_ep->flags = 0;
+
+		dev_dbg(priv_dev->dev, "Initialized  %s support: %s %s\n",
+			 priv_ep->name,
+			 priv_ep->endpoint.caps.type_bulk ? "BULK, INT" : "",
+			 priv_ep->endpoint.caps.type_iso ? "ISO" : "");
+
+		INIT_LIST_HEAD(&priv_ep->pending_req_list);
+		INIT_LIST_HEAD(&priv_ep->deferred_req_list);
+		INIT_LIST_HEAD(&priv_ep->wa2_descmiss_req_list);
+	}
+
+	return 0;
+err:
+	cdns3_free_all_eps(priv_dev);
+	return -ENOMEM;
+}
+
+static void cdns3_gadget_release(struct device *dev)
+{
+	struct cdns3_device *priv_dev = container_of(dev,
+			struct cdns3_device, gadget.dev);
+
+	kfree(priv_dev);
+}
+
+static void cdns3_gadget_exit(struct cdns *cdns)
+{
+	struct cdns3_device *priv_dev;
+
+	priv_dev = cdns->gadget_dev;
+
+
+	pm_runtime_put_autosuspend(cdns->dev);
+
+	usb_del_gadget(&priv_dev->gadget);
+	devm_free_irq(cdns->dev, cdns->dev_irq, priv_dev);
+
+	cdns3_free_all_eps(priv_dev);
+
+	while (!list_empty(&priv_dev->aligned_buf_list)) {
+		struct cdns3_aligned_buf *buf;
+
+		buf = cdns3_next_align_buf(&priv_dev->aligned_buf_list);
+		dma_free_noncoherent(priv_dev->sysdev, buf->size,
+				  buf->buf,
+				  buf->dma,
+				  buf->dir);
+
+		list_del(&buf->list);
+		kfree(buf);
+	}
+
+	dma_free_coherent(priv_dev->sysdev, 8, priv_dev->setup_buf,
+			  priv_dev->setup_dma);
+	dma_pool_destroy(priv_dev->eps_dma_pool);
+
+	kfree(priv_dev->zlp_buf);
+	usb_put_gadget(&priv_dev->gadget);
+	cdns->gadget_dev = NULL;
+	cdns_drd_gadget_off(cdns);
+}
+
+static int cdns3_gadget_start(struct cdns *cdns)
+{
+	struct cdns3_device *priv_dev;
+	u32 max_speed;
+	int ret;
+
+	priv_dev = kzalloc_obj(*priv_dev);
+	if (!priv_dev)
+		return -ENOMEM;
+
+	usb_initialize_gadget(cdns->dev, &priv_dev->gadget,
+			cdns3_gadget_release);
+	cdns->gadget_dev = priv_dev;
+	priv_dev->sysdev = cdns->dev;
+	priv_dev->dev = cdns->dev;
+	priv_dev->regs = cdns->dev_regs;
+
+	device_property_read_u16(priv_dev->dev, "cdns,on-chip-buff-size",
+				 &priv_dev->onchip_buffers);
+
+	if (priv_dev->onchip_buffers <=  0) {
+		u32 reg = readl(&priv_dev->regs->usb_cap2);
+
+		priv_dev->onchip_buffers = USB_CAP2_ACTUAL_MEM_SIZE(reg);
+	}
+
+	if (!priv_dev->onchip_buffers)
+		priv_dev->onchip_buffers = 256;
+
+	max_speed = usb_get_maximum_speed(cdns->dev);
+
+	/* Check the maximum_speed parameter */
+	switch (max_speed) {
+	case USB_SPEED_FULL:
+	case USB_SPEED_HIGH:
+	case USB_SPEED_SUPER:
+		break;
+	default:
+		dev_err(cdns->dev, "invalid maximum_speed parameter %d\n",
+			max_speed);
+		fallthrough;
+	case USB_SPEED_UNKNOWN:
+		/* default to superspeed */
+		max_speed = USB_SPEED_SUPER;
+		break;
+	}
+
+	/* fill gadget fields */
+	priv_dev->gadget.max_speed = max_speed;
+	priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
+	priv_dev->gadget.ops = &cdns3_gadget_ops;
+	priv_dev->gadget.name = "usb-ss-gadget";
+	priv_dev->gadget.quirk_avoids_skb_reserve = 1;
+	priv_dev->gadget.irq = cdns->dev_irq;
+
+	spin_lock_init(&priv_dev->lock);
+	INIT_WORK(&priv_dev->pending_status_wq,
+		  cdns3_pending_setup_status_handler);
+
+	INIT_WORK(&priv_dev->aligned_buf_wq,
+		  cdns3_free_aligned_request_buf);
+
+	/* initialize endpoint container */
+	INIT_LIST_HEAD(&priv_dev->gadget.ep_list);
+	INIT_LIST_HEAD(&priv_dev->aligned_buf_list);
+	priv_dev->eps_dma_pool = dma_pool_create("cdns3_eps_dma_pool",
+						 priv_dev->sysdev,
+						 TRB_RING_SIZE, 8, 0);
+	if (!priv_dev->eps_dma_pool) {
+		dev_err(priv_dev->dev, "Failed to create TRB dma pool\n");
+		ret = -ENOMEM;
+		goto err1;
+	}
+
+	ret = cdns3_init_eps(priv_dev);
+	if (ret) {
+		dev_err(priv_dev->dev, "Failed to create endpoints\n");
+		goto err1;
+	}
+
+	/* allocate memory for setup packet buffer */
+	priv_dev->setup_buf = dma_alloc_coherent(priv_dev->sysdev, 8,
+						 &priv_dev->setup_dma, GFP_DMA);
+	if (!priv_dev->setup_buf) {
+		ret = -ENOMEM;
+		goto err2;
+	}
+
+	priv_dev->dev_ver = readl(&priv_dev->regs->usb_cap6);
+
+	dev_dbg(priv_dev->dev, "Device Controller version: %08x\n",
+		readl(&priv_dev->regs->usb_cap6));
+	dev_dbg(priv_dev->dev, "USB Capabilities:: %08x\n",
+		readl(&priv_dev->regs->usb_cap1));
+	dev_dbg(priv_dev->dev, "On-Chip memory configuration: %08x\n",
+		readl(&priv_dev->regs->usb_cap2));
+
+	priv_dev->dev_ver = GET_DEV_BASE_VERSION(priv_dev->dev_ver);
+	if (priv_dev->dev_ver >= DEV_VER_V2)
+		priv_dev->gadget.sg_supported = 1;
+
+	priv_dev->zlp_buf = kzalloc(CDNS3_EP_ZLP_BUF_SIZE, GFP_KERNEL);
+	if (!priv_dev->zlp_buf) {
+		ret = -ENOMEM;
+		goto err3;
+	}
+
+	/* add USB gadget device */
+	ret = usb_add_gadget(&priv_dev->gadget);
+	if (ret < 0) {
+		dev_err(priv_dev->dev, "Failed to add gadget\n");
+		goto err4;
+	}
+
+	return 0;
+err4:
+	kfree(priv_dev->zlp_buf);
+err3:
+	dma_free_coherent(priv_dev->sysdev, 8, priv_dev->setup_buf,
+			  priv_dev->setup_dma);
+err2:
+	cdns3_free_all_eps(priv_dev);
+err1:
+	dma_pool_destroy(priv_dev->eps_dma_pool);
+
+	usb_put_gadget(&priv_dev->gadget);
+	cdns->gadget_dev = NULL;
+	return ret;
+}
+
+static int __cdns3_gadget_init(struct cdns *cdns)
+{
+	int ret = 0;
+
+	/* Ensure 32-bit DMA Mask in case we switched back from Host mode */
+	ret = dma_set_mask_and_coherent(cdns->dev, DMA_BIT_MASK(32));
+	if (ret) {
+		dev_err(cdns->dev, "Failed to set dma mask: %d\n", ret);
+		return ret;
+	}
+
+	cdns_drd_gadget_on(cdns);
+	pm_runtime_get_sync(cdns->dev);
+
+	ret = cdns3_gadget_start(cdns);
+	if (ret) {
+		pm_runtime_put_sync(cdns->dev);
+		cdns_drd_gadget_off(cdns);
+		return ret;
+	}
+
+	/*
+	 * Because interrupt line can be shared with other components in
+	 * driver it can't use IRQF_ONESHOT flag here.
+	 */
+	ret = devm_request_threaded_irq(cdns->dev, cdns->dev_irq,
+					cdns3_device_irq_handler,
+					cdns3_device_thread_irq_handler,
+					IRQF_SHARED, dev_name(cdns->dev),
+					cdns->gadget_dev);
+
+	if (ret)
+		goto err0;
+
+	return 0;
+err0:
+	cdns3_gadget_exit(cdns);
+	return ret;
+}
+
+static int cdns3_gadget_suspend(struct cdns *cdns, bool do_wakeup)
+__must_hold(&cdns->lock)
+{
+	struct cdns3_device *priv_dev = cdns->gadget_dev;
+
+	spin_unlock(&cdns->lock);
+	cdns3_disconnect_gadget(priv_dev);
+	spin_lock(&cdns->lock);
+
+	priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
+	usb_gadget_set_state(&priv_dev->gadget, USB_STATE_NOTATTACHED);
+	cdns3_hw_reset_eps_config(priv_dev);
+
+	/* disable interrupt for device */
+	writel(0, &priv_dev->regs->usb_ien);
+
+	return 0;
+}
+
+static int cdns3_gadget_resume(struct cdns *cdns, bool lost_power)
+{
+	struct cdns3_device *priv_dev = cdns->gadget_dev;
+
+	if (!priv_dev->gadget_driver)
+		return 0;
+
+	cdns3_gadget_config(priv_dev);
+	if (lost_power)
+		writel(USB_CONF_DEVEN, &priv_dev->regs->usb_conf);
+
+	return 0;
+}
+
+/**
+ * cdns3_gadget_init - initialize device structure
+ *
+ * @cdns: cdns instance
+ *
+ * This function initializes the gadget.
+ */
+int cdns3_gadget_init(struct cdns *cdns)
+{
+	struct cdns_role_driver *rdrv;
+
+	rdrv = devm_kzalloc(cdns->dev, sizeof(*rdrv), GFP_KERNEL);
+	if (!rdrv)
+		return -ENOMEM;
+
+	rdrv->start	= __cdns3_gadget_init;
+	rdrv->stop	= cdns3_gadget_exit;
+	rdrv->suspend	= cdns3_gadget_suspend;
+	rdrv->resume	= cdns3_gadget_resume;
+	rdrv->state	= CDNS_ROLE_STATE_INACTIVE;
+	rdrv->name	= "gadget";
+	cdns->roles[USB_ROLE_DEVICE] = rdrv;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cdns3_gadget_init);
diff --git a/drivers/usb/cdns3/cdns3-gadget.h b/drivers/usb/cdns3/cdns3-gadget.h
new file mode 100644
index 000000000..086a7bb83
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-gadget.h
@@ -0,0 +1,1377 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * USBSS device controller driver header file
+ *
+ * Copyright (C) 2018-2019 Cadence.
+ * Copyright (C) 2017-2018 NXP
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ *         Pawel Jez <pjez@cadence.com>
+ *         Peter Chen <peter.chen@nxp.com>
+ */
+#ifndef __LINUX_CDNS3_GADGET
+#define __LINUX_CDNS3_GADGET
+#include <linux/usb/gadget.h>
+#include <linux/dma-direction.h>
+
+/*
+ * USBSS-DEV register interface.
+ * This corresponds to the USBSS Device Controller Interface
+ */
+
+/**
+ * struct cdns3_usb_regs - device controller registers.
+ * @usb_conf:      Global Configuration.
+ * @usb_sts:       Global Status.
+ * @usb_cmd:       Global Command.
+ * @usb_itpn:      ITP/SOF number.
+ * @usb_lpm:       Global Command.
+ * @usb_ien:       USB Interrupt Enable.
+ * @usb_ists:      USB Interrupt Status.
+ * @ep_sel:        Endpoint Select.
+ * @ep_traddr:     Endpoint Transfer Ring Address.
+ * @ep_cfg:        Endpoint Configuration.
+ * @ep_cmd:        Endpoint Command.
+ * @ep_sts:        Endpoint Status.
+ * @ep_sts_sid:    Endpoint Status.
+ * @ep_sts_en:     Endpoint Status Enable.
+ * @drbl:          Doorbell.
+ * @ep_ien:        EP Interrupt Enable.
+ * @ep_ists:       EP Interrupt Status.
+ * @usb_pwr:       Global Power Configuration.
+ * @usb_conf2:     Global Configuration 2.
+ * @usb_cap1:      Capability 1.
+ * @usb_cap2:      Capability 2.
+ * @usb_cap3:      Capability 3.
+ * @usb_cap4:      Capability 4.
+ * @usb_cap5:      Capability 5.
+ * @usb_cap6:      Capability 6.
+ * @usb_cpkt1:     Custom Packet 1.
+ * @usb_cpkt2:     Custom Packet 2.
+ * @usb_cpkt3:     Custom Packet 3.
+ * @ep_dma_ext_addr: Upper address for DMA operations.
+ * @buf_addr:      Address for On-chip Buffer operations.
+ * @buf_data:      Data for On-chip Buffer operations.
+ * @buf_ctrl:      On-chip Buffer Access Control.
+ * @dtrans:        DMA Transfer Mode.
+ * @tdl_from_trb:  Source of TD Configuration.
+ * @tdl_beh:       TDL Behavior Configuration.
+ * @ep_tdl:        Endpoint TDL.
+ * @tdl_beh2:      TDL Behavior 2 Configuration.
+ * @dma_adv_td:    DMA Advance TD Configuration.
+ * @reserved1:     Reserved.
+ * @cfg_regs:      Configuration.
+ * @reserved2:     Reserved.
+ * @dma_axi_ctrl:  AXI Control.
+ * @dma_axi_id:    AXI ID register.
+ * @dma_axi_cap:   AXI Capability.
+ * @dma_axi_ctrl0: AXI Control 0.
+ * @dma_axi_ctrl1: AXI Control 1.
+ */
+struct cdns3_usb_regs {
+	__le32 usb_conf;
+	__le32 usb_sts;
+	__le32 usb_cmd;
+	__le32 usb_itpn;
+	__le32 usb_lpm;
+	__le32 usb_ien;
+	__le32 usb_ists;
+	__le32 ep_sel;
+	__le32 ep_traddr;
+	__le32 ep_cfg;
+	__le32 ep_cmd;
+	__le32 ep_sts;
+	__le32 ep_sts_sid;
+	__le32 ep_sts_en;
+	__le32 drbl;
+	__le32 ep_ien;
+	__le32 ep_ists;
+	__le32 usb_pwr;
+	__le32 usb_conf2;
+	__le32 usb_cap1;
+	__le32 usb_cap2;
+	__le32 usb_cap3;
+	__le32 usb_cap4;
+	__le32 usb_cap5;
+	__le32 usb_cap6;
+	__le32 usb_cpkt1;
+	__le32 usb_cpkt2;
+	__le32 usb_cpkt3;
+	__le32 ep_dma_ext_addr;
+	__le32 buf_addr;
+	__le32 buf_data;
+	__le32 buf_ctrl;
+	__le32 dtrans;
+	__le32 tdl_from_trb;
+	__le32 tdl_beh;
+	__le32 ep_tdl;
+	__le32 tdl_beh2;
+	__le32 dma_adv_td;
+	__le32 reserved1[26];
+	__le32 cfg_reg1;
+	__le32 dbg_link1;
+	__le32 dbg_link2;
+	__le32 cfg_regs[74];
+	__le32 reserved2[51];
+	__le32 dma_axi_ctrl;
+	__le32 dma_axi_id;
+	__le32 dma_axi_cap;
+	__le32 dma_axi_ctrl0;
+	__le32 dma_axi_ctrl1;
+};
+
+/* USB_CONF - bitmasks */
+/* Reset USB device configuration. */
+#define USB_CONF_CFGRST		BIT(0)
+/* Set Configuration. */
+#define USB_CONF_CFGSET		BIT(1)
+/* Disconnect USB device in SuperSpeed. */
+#define USB_CONF_USB3DIS	BIT(3)
+/* Disconnect USB device in HS/FS */
+#define USB_CONF_USB2DIS	BIT(4)
+/* Little Endian access - default */
+#define USB_CONF_LENDIAN	BIT(5)
+/*
+ * Big Endian access. Driver assume that byte order for
+ * SFRs access always is as Little Endian so this bit
+ * is not used.
+ */
+#define USB_CONF_BENDIAN	BIT(6)
+/* Device software reset. */
+#define USB_CONF_SWRST		BIT(7)
+/* Singular DMA transfer mode. Only for VER < DEV_VER_V3*/
+#define USB_CONF_DSING		BIT(8)
+/* Multiple DMA transfers mode. Only for VER < DEV_VER_V3 */
+#define USB_CONF_DMULT		BIT(9)
+/* DMA clock turn-off enable. */
+#define USB_CONF_DMAOFFEN	BIT(10)
+/* DMA clock turn-off disable. */
+#define USB_CONF_DMAOFFDS	BIT(11)
+/* Clear Force Full Speed. */
+#define USB_CONF_CFORCE_FS	BIT(12)
+/* Set Force Full Speed. */
+#define USB_CONF_SFORCE_FS	BIT(13)
+/* Device enable. */
+#define USB_CONF_DEVEN		BIT(14)
+/* Device disable. */
+#define USB_CONF_DEVDS		BIT(15)
+/* L1 LPM state entry enable (used in HS/FS mode). */
+#define USB_CONF_L1EN		BIT(16)
+/* L1 LPM state entry disable (used in HS/FS mode). */
+#define USB_CONF_L1DS		BIT(17)
+/* USB 2.0 clock gate disable. */
+#define USB_CONF_CLK2OFFEN	BIT(18)
+/* USB 2.0 clock gate enable. */
+#define USB_CONF_CLK2OFFDS	BIT(19)
+/* L0 LPM state entry request (used in HS/FS mode). */
+#define USB_CONF_LGO_L0		BIT(20)
+/* USB 3.0 clock gate disable. */
+#define USB_CONF_CLK3OFFEN	BIT(21)
+/* USB 3.0 clock gate enable. */
+#define USB_CONF_CLK3OFFDS	BIT(22)
+/* Bit 23 is reserved*/
+/* U1 state entry enable (used in SS mode). */
+#define USB_CONF_U1EN		BIT(24)
+/* U1 state entry disable (used in SS mode). */
+#define USB_CONF_U1DS		BIT(25)
+/* U2 state entry enable (used in SS mode). */
+#define USB_CONF_U2EN		BIT(26)
+/* U2 state entry disable (used in SS mode). */
+#define USB_CONF_U2DS		BIT(27)
+/* U0 state entry request (used in SS mode). */
+#define USB_CONF_LGO_U0		BIT(28)
+/* U1 state entry request (used in SS mode). */
+#define USB_CONF_LGO_U1		BIT(29)
+/* U2 state entry request (used in SS mode). */
+#define USB_CONF_LGO_U2		BIT(30)
+/* SS.Inactive state entry request (used in SS mode) */
+#define USB_CONF_LGO_SSINACT	BIT(31)
+
+/* USB_STS - bitmasks */
+/*
+ * Configuration status.
+ * 1 - device is in the configured state.
+ * 0 - device is not configured.
+ */
+#define USB_STS_CFGSTS_MASK	BIT(0)
+#define USB_STS_CFGSTS(p)	((p) & USB_STS_CFGSTS_MASK)
+/*
+ * On-chip memory overflow.
+ * 0 - On-chip memory status OK.
+ * 1 - On-chip memory overflow.
+ */
+#define USB_STS_OV_MASK		BIT(1)
+#define USB_STS_OV(p)		((p) & USB_STS_OV_MASK)
+/*
+ * SuperSpeed connection status.
+ * 0 - USB in SuperSpeed mode disconnected.
+ * 1 - USB in SuperSpeed mode connected.
+ */
+#define USB_STS_USB3CONS_MASK	BIT(2)
+#define USB_STS_USB3CONS(p)	((p) & USB_STS_USB3CONS_MASK)
+/*
+ * DMA transfer configuration status.
+ * 0 - single request.
+ * 1 - multiple TRB chain
+ * Supported only for controller version <  DEV_VER_V3
+ */
+#define USB_STS_DTRANS_MASK	BIT(3)
+#define USB_STS_DTRANS(p)	((p) & USB_STS_DTRANS_MASK)
+/*
+ * Device speed.
+ * 0 - Undefined (value after reset).
+ * 1 - Low speed
+ * 2 - Full speed
+ * 3 - High speed
+ * 4 - Super speed
+ */
+#define USB_STS_USBSPEED_MASK	GENMASK(6, 4)
+#define USB_STS_USBSPEED(p)	(((p) & USB_STS_USBSPEED_MASK) >> 4)
+#define USB_STS_LS		(0x1 << 4)
+#define USB_STS_FS		(0x2 << 4)
+#define USB_STS_HS		(0x3 << 4)
+#define USB_STS_SS		(0x4 << 4)
+#define DEV_UNDEFSPEED(p)	(((p) & USB_STS_USBSPEED_MASK) == (0x0 << 4))
+#define DEV_LOWSPEED(p)		(((p) & USB_STS_USBSPEED_MASK) == USB_STS_LS)
+#define DEV_FULLSPEED(p)	(((p) & USB_STS_USBSPEED_MASK) == USB_STS_FS)
+#define DEV_HIGHSPEED(p)	(((p) & USB_STS_USBSPEED_MASK) == USB_STS_HS)
+#define DEV_SUPERSPEED(p)	(((p) & USB_STS_USBSPEED_MASK) == USB_STS_SS)
+/*
+ * Endianness for SFR access.
+ * 0 - Little Endian order (default after hardware reset).
+ * 1 - Big Endian order
+ */
+#define USB_STS_ENDIAN_MASK	BIT(7)
+#define USB_STS_ENDIAN(p)	((p) & USB_STS_ENDIAN_MASK)
+/*
+ * HS/FS clock turn-off status.
+ * 0 - hsfs clock is always on.
+ * 1 - hsfs clock turn-off in L2 (HS/FS mode) is enabled
+ *          (default after hardware reset).
+ */
+#define USB_STS_CLK2OFF_MASK	BIT(8)
+#define USB_STS_CLK2OFF(p)	((p) & USB_STS_CLK2OFF_MASK)
+/*
+ * PCLK clock turn-off status.
+ * 0 - pclk clock is always on.
+ * 1 - pclk clock turn-off in U3 (SS mode) is enabled
+ *          (default after hardware reset).
+ */
+#define USB_STS_CLK3OFF_MASK	BIT(9)
+#define USB_STS_CLK3OFF(p)	((p) & USB_STS_CLK3OFF_MASK)
+/*
+ * Controller in reset state.
+ * 0 - Internal reset is active.
+ * 1 - Internal reset is not active and controller is fully operational.
+ */
+#define USB_STS_IN_RST_MASK	BIT(10)
+#define USB_STS_IN_RST(p)	((p) & USB_STS_IN_RST_MASK)
+/*
+ * Status of the "TDL calculation basing on TRB" feature.
+ * 0 - disabled
+ * 1 - enabled
+ * Supported only for DEV_VER_V2 controller version.
+ */
+#define USB_STS_TDL_TRB_ENABLED	BIT(11)
+/*
+ * Device enable Status.
+ * 0 - USB device is disabled (VBUS input is disconnected from internal logic).
+ * 1 - USB device is enabled (VBUS input is connected to the internal logic).
+ */
+#define USB_STS_DEVS_MASK	BIT(14)
+#define USB_STS_DEVS(p)		((p) & USB_STS_DEVS_MASK)
+/*
+ * Address status.
+ * 0 - USB device is default state.
+ * 1 - USB device is at least in address state.
+ */
+#define USB_STS_ADDRESSED_MASK	BIT(15)
+#define USB_STS_ADDRESSED(p)	((p) & USB_STS_ADDRESSED_MASK)
+/*
+ * L1 LPM state enable status (used in HS/FS mode).
+ * 0 - Entering to L1 LPM state disabled.
+ * 1 - Entering to L1 LPM state enabled.
+ */
+#define USB_STS_L1ENS_MASK	BIT(16)
+#define USB_STS_L1ENS(p)	((p) & USB_STS_L1ENS_MASK)
+/*
+ * Internal VBUS connection status (used both in HS/FS  and SS mode).
+ * 0 - internal VBUS is not detected.
+ * 1 - internal VBUS is detected.
+ */
+#define USB_STS_VBUSS_MASK	BIT(17)
+#define USB_STS_VBUSS(p)	((p) & USB_STS_VBUSS_MASK)
+/*
+ * HS/FS LPM  state (used in FS/HS mode).
+ * 0 - L0 State
+ * 1 - L1 State
+ * 2 - L2 State
+ * 3 - L3 State
+ */
+#define USB_STS_LPMST_MASK	GENMASK(19, 18)
+#define DEV_L0_STATE(p)		(((p) & USB_STS_LPMST_MASK) == (0x0 << 18))
+#define DEV_L1_STATE(p)		(((p) & USB_STS_LPMST_MASK) == (0x1 << 18))
+#define DEV_L2_STATE(p)		(((p) & USB_STS_LPMST_MASK) == (0x2 << 18))
+#define DEV_L3_STATE(p)		(((p) & USB_STS_LPMST_MASK) == (0x3 << 18))
+/*
+ * Disable HS status (used in FS/HS mode).
+ * 0 - the disconnect bit for HS/FS mode is set .
+ * 1 - the disconnect bit for HS/FS mode is not set.
+ */
+#define USB_STS_USB2CONS_MASK	BIT(20)
+#define USB_STS_USB2CONS(p)	((p) & USB_STS_USB2CONS_MASK)
+/*
+ * HS/FS mode connection status (used in FS/HS mode).
+ * 0 - High Speed operations in USB2.0 (FS/HS) mode not disabled.
+ * 1 - High Speed operations in USB2.0 (FS/HS).
+ */
+#define USB_STS_DISABLE_HS_MASK	BIT(21)
+#define USB_STS_DISABLE_HS(p)	((p) & USB_STS_DISABLE_HS_MASK)
+/*
+ * U1 state enable status (used in SS mode).
+ * 0 - Entering to  U1 state disabled.
+ * 1 - Entering to  U1 state enabled.
+ */
+#define USB_STS_U1ENS_MASK	BIT(24)
+#define USB_STS_U1ENS(p)	((p) & USB_STS_U1ENS_MASK)
+/*
+ * U2 state enable status (used in SS mode).
+ * 0 - Entering to  U2 state disabled.
+ * 1 - Entering to  U2 state enabled.
+ */
+#define USB_STS_U2ENS_MASK	BIT(25)
+#define USB_STS_U2ENS(p)	((p) & USB_STS_U2ENS_MASK)
+/*
+ * SuperSpeed Link LTSSM state. This field reflects USBSS-DEV current
+ * SuperSpeed link state
+ */
+#define USB_STS_LST_MASK	GENMASK(29, 26)
+#define DEV_LST_U0		(((p) & USB_STS_LST_MASK) == (0x0 << 26))
+#define DEV_LST_U1		(((p) & USB_STS_LST_MASK) == (0x1 << 26))
+#define DEV_LST_U2		(((p) & USB_STS_LST_MASK) == (0x2 << 26))
+#define DEV_LST_U3		(((p) & USB_STS_LST_MASK) == (0x3 << 26))
+#define DEV_LST_DISABLED	(((p) & USB_STS_LST_MASK) == (0x4 << 26))
+#define DEV_LST_RXDETECT	(((p) & USB_STS_LST_MASK) == (0x5 << 26))
+#define DEV_LST_INACTIVE	(((p) & USB_STS_LST_MASK) == (0x6 << 26))
+#define DEV_LST_POLLING		(((p) & USB_STS_LST_MASK) == (0x7 << 26))
+#define DEV_LST_RECOVERY	(((p) & USB_STS_LST_MASK) == (0x8 << 26))
+#define DEV_LST_HOT_RESET	(((p) & USB_STS_LST_MASK) == (0x9 << 26))
+#define DEV_LST_COMP_MODE	(((p) & USB_STS_LST_MASK) == (0xa << 26))
+#define DEV_LST_LB_STATE	(((p) & USB_STS_LST_MASK) == (0xb << 26))
+/*
+ * DMA clock turn-off status.
+ * 0 - DMA clock is always on (default after hardware reset).
+ * 1 - DMA clock turn-off in U1, U2 and U3 (SS mode) is enabled.
+ */
+#define USB_STS_DMAOFF_MASK	BIT(30)
+#define USB_STS_DMAOFF(p)	((p) & USB_STS_DMAOFF_MASK)
+/*
+ * SFR Endian status.
+ * 0 - Little Endian order (default after hardware reset).
+ * 1 - Big Endian order.
+ */
+#define USB_STS_ENDIAN2_MASK	BIT(31)
+#define USB_STS_ENDIAN2(p)	((p) & USB_STS_ENDIAN2_MASK)
+
+/* USB_CMD -  bitmasks */
+/* Set Function Address */
+#define USB_CMD_SET_ADDR	BIT(0)
+/*
+ * Function Address This field is saved to the device only when the field
+ * SET_ADDR is set '1 ' during write to USB_CMD register.
+ * Software is responsible for entering the address of the device during
+ * SET_ADDRESS request service. This field should be set immediately after
+ * the SETUP packet is decoded, and prior to confirmation of the status phase
+ */
+#define USB_CMD_FADDR_MASK	GENMASK(7, 1)
+#define USB_CMD_FADDR(p)	(((p) << 1) & USB_CMD_FADDR_MASK)
+/* Send Function Wake Device Notification TP (used only in SS mode). */
+#define USB_CMD_SDNFW		BIT(8)
+/* Set Test Mode (used only in HS/FS mode). */
+#define USB_CMD_STMODE		BIT(9)
+/* Test mode selector (used only in HS/FS mode) */
+#define USB_STS_TMODE_SEL_MASK	GENMASK(11, 10)
+#define USB_STS_TMODE_SEL(p)	(((p) << 10) & USB_STS_TMODE_SEL_MASK)
+/*
+ *  Send Latency Tolerance Message Device Notification TP (used only
+ *  in SS mode).
+ */
+#define USB_CMD_SDNLTM		BIT(12)
+/* Send Custom Transaction Packet (used only in SS mode) */
+#define USB_CMD_SPKT		BIT(13)
+/*Device Notification 'Function Wake' - Interface value (only in SS mode. */
+#define USB_CMD_DNFW_INT_MASK	GENMASK(23, 16)
+#define USB_STS_DNFW_INT(p)	(((p) << 16) & USB_CMD_DNFW_INT_MASK)
+/*
+ * Device Notification 'Latency Tolerance Message' -373 BELT value [7:0]
+ * (used only in SS mode).
+ */
+#define USB_CMD_DNLTM_BELT_MASK	GENMASK(27, 16)
+#define USB_STS_DNLTM_BELT(p)	(((p) << 16) & USB_CMD_DNLTM_BELT_MASK)
+
+/* USB_ITPN - bitmasks */
+/*
+ * ITP(SS) / SOF (HS/FS) number
+ * In SS mode this field represent number of last ITP received from host.
+ * In HS/FS mode this field represent number of last SOF received from host.
+ */
+#define USB_ITPN_MASK		GENMASK(13, 0)
+#define USB_ITPN(p)		((p) & USB_ITPN_MASK)
+
+/* USB_LPM - bitmasks */
+/* Host Initiated Resume Duration. */
+#define USB_LPM_HIRD_MASK	GENMASK(3, 0)
+#define USB_LPM_HIRD(p)		((p) & USB_LPM_HIRD_MASK)
+/* Remote Wakeup Enable (bRemoteWake). */
+#define USB_LPM_BRW		BIT(4)
+
+/* USB_IEN - bitmasks */
+/* SS connection interrupt enable */
+#define USB_IEN_CONIEN		BIT(0)
+/* SS disconnection interrupt enable. */
+#define USB_IEN_DISIEN		BIT(1)
+/* USB SS warm reset interrupt enable. */
+#define USB_IEN_UWRESIEN	BIT(2)
+/* USB SS hot reset interrupt enable */
+#define USB_IEN_UHRESIEN	BIT(3)
+/* SS link U3 state enter interrupt enable (suspend).*/
+#define USB_IEN_U3ENTIEN	BIT(4)
+/* SS link U3 state exit interrupt enable (wakeup). */
+#define USB_IEN_U3EXTIEN	BIT(5)
+/* SS link U2 state enter interrupt enable.*/
+#define USB_IEN_U2ENTIEN	BIT(6)
+/* SS link U2 state exit interrupt enable.*/
+#define USB_IEN_U2EXTIEN	BIT(7)
+/* SS link U1 state enter interrupt enable.*/
+#define USB_IEN_U1ENTIEN	BIT(8)
+/* SS link U1 state exit interrupt enable.*/
+#define USB_IEN_U1EXTIEN	BIT(9)
+/* ITP/SOF packet detected interrupt enable.*/
+#define USB_IEN_ITPIEN		BIT(10)
+/* Wakeup interrupt enable.*/
+#define USB_IEN_WAKEIEN		BIT(11)
+/* Send Custom Packet interrupt enable.*/
+#define USB_IEN_SPKTIEN		BIT(12)
+/* HS/FS mode connection interrupt enable.*/
+#define USB_IEN_CON2IEN		BIT(16)
+/* HS/FS mode disconnection interrupt enable.*/
+#define USB_IEN_DIS2IEN		BIT(17)
+/* USB reset (HS/FS mode) interrupt enable.*/
+#define USB_IEN_U2RESIEN	BIT(18)
+/* LPM L2 state enter interrupt enable.*/
+#define USB_IEN_L2ENTIEN	BIT(20)
+/* LPM  L2 state exit interrupt enable.*/
+#define USB_IEN_L2EXTIEN	BIT(21)
+/* LPM L1 state enter interrupt enable.*/
+#define USB_IEN_L1ENTIEN	BIT(24)
+/* LPM  L1 state exit interrupt enable.*/
+#define USB_IEN_L1EXTIEN	BIT(25)
+/* Configuration reset interrupt enable.*/
+#define USB_IEN_CFGRESIEN	BIT(26)
+/* Start of the USB SS warm reset interrupt enable.*/
+#define USB_IEN_UWRESSIEN	BIT(28)
+/* End of the USB SS warm reset interrupt enable.*/
+#define USB_IEN_UWRESEIEN	BIT(29)
+
+#define USB_IEN_INIT  (USB_IEN_U2RESIEN | USB_ISTS_DIS2I | USB_IEN_CON2IEN \
+		       | USB_IEN_UHRESIEN | USB_IEN_UWRESIEN | USB_IEN_DISIEN \
+		       | USB_IEN_CONIEN | USB_IEN_U3EXTIEN | USB_IEN_L2ENTIEN \
+		       | USB_IEN_L2EXTIEN | USB_IEN_L1ENTIEN | USB_IEN_U3ENTIEN)
+
+/* USB_ISTS - bitmasks */
+/* SS Connection detected. */
+#define USB_ISTS_CONI		BIT(0)
+/* SS Disconnection detected. */
+#define USB_ISTS_DISI		BIT(1)
+/* UUSB warm reset detectede. */
+#define USB_ISTS_UWRESI		BIT(2)
+/* USB hot reset detected. */
+#define USB_ISTS_UHRESI		BIT(3)
+/* U3 link state enter detected (suspend).*/
+#define USB_ISTS_U3ENTI		BIT(4)
+/* U3 link state exit detected (wakeup). */
+#define USB_ISTS_U3EXTI		BIT(5)
+/* U2 link state enter detected.*/
+#define USB_ISTS_U2ENTI		BIT(6)
+/* U2 link state exit detected.*/
+#define USB_ISTS_U2EXTI		BIT(7)
+/* U1 link state enter detected.*/
+#define USB_ISTS_U1ENTI		BIT(8)
+/* U1 link state exit detected.*/
+#define USB_ISTS_U1EXTI		BIT(9)
+/* ITP/SOF packet detected.*/
+#define USB_ISTS_ITPI		BIT(10)
+/* Wakeup detected.*/
+#define USB_ISTS_WAKEI		BIT(11)
+/* Send Custom Packet detected.*/
+#define USB_ISTS_SPKTI		BIT(12)
+/* HS/FS mode connection detected.*/
+#define USB_ISTS_CON2I		BIT(16)
+/* HS/FS mode disconnection detected.*/
+#define USB_ISTS_DIS2I		BIT(17)
+/* USB reset (HS/FS mode) detected.*/
+#define USB_ISTS_U2RESI		BIT(18)
+/* LPM L2 state enter detected.*/
+#define USB_ISTS_L2ENTI		BIT(20)
+/* LPM  L2 state exit detected.*/
+#define USB_ISTS_L2EXTI		BIT(21)
+/* LPM L1 state enter detected.*/
+#define USB_ISTS_L1ENTI		BIT(24)
+/* LPM L1 state exit detected.*/
+#define USB_ISTS_L1EXTI		BIT(25)
+/* USB configuration reset detected.*/
+#define USB_ISTS_CFGRESI	BIT(26)
+/* Start of the USB warm reset detected.*/
+#define USB_ISTS_UWRESSI	BIT(28)
+/* End of the USB warm reset detected.*/
+#define USB_ISTS_UWRESEI	BIT(29)
+
+/* USB_SEL - bitmasks */
+#define EP_SEL_EPNO_MASK	GENMASK(3, 0)
+/* Endpoint number. */
+#define EP_SEL_EPNO(p)		((p) & EP_SEL_EPNO_MASK)
+/* Endpoint direction bit - 0 - OUT, 1 - IN. */
+#define EP_SEL_DIR		BIT(7)
+
+#define select_ep_in(nr)	(EP_SEL_EPNO(p) | EP_SEL_DIR)
+#define select_ep_out		(EP_SEL_EPNO(p))
+
+/* EP_TRADDR - bitmasks */
+/* Transfer Ring address. */
+#define EP_TRADDR_TRADDR(p)	((p))
+
+/* EP_CFG - bitmasks */
+/* Endpoint enable */
+#define EP_CFG_ENABLE		BIT(0)
+/*
+ *  Endpoint type.
+ * 1 - isochronous
+ * 2 - bulk
+ * 3 - interrupt
+ */
+#define EP_CFG_EPTYPE_MASK	GENMASK(2, 1)
+#define EP_CFG_EPTYPE(p)	(((p) << 1)  & EP_CFG_EPTYPE_MASK)
+/* Stream support enable (only in SS mode). */
+#define EP_CFG_STREAM_EN	BIT(3)
+/* TDL check (only in SS mode for BULK EP). */
+#define EP_CFG_TDL_CHK		BIT(4)
+/* SID check (only in SS mode for BULK OUT EP). */
+#define EP_CFG_SID_CHK		BIT(5)
+/* DMA transfer endianness. */
+#define EP_CFG_EPENDIAN		BIT(7)
+/* Max burst size (used only in SS mode). */
+#define EP_CFG_MAXBURST_MASK	GENMASK(11, 8)
+#define EP_CFG_MAXBURST(p)	(((p) << 8) & EP_CFG_MAXBURST_MASK)
+#define EP_CFG_MAXBURST_MAX	15
+/* ISO max burst. */
+#define EP_CFG_MULT_MASK	GENMASK(15, 14)
+#define EP_CFG_MULT(p)		(((p) << 14) & EP_CFG_MULT_MASK)
+#define EP_CFG_MULT_MAX		2
+/* ISO max burst. */
+#define EP_CFG_MAXPKTSIZE_MASK	GENMASK(26, 16)
+#define EP_CFG_MAXPKTSIZE(p)	(((p) << 16) & EP_CFG_MAXPKTSIZE_MASK)
+/* Max number of buffered packets. */
+#define EP_CFG_BUFFERING_MASK	GENMASK(31, 27)
+#define EP_CFG_BUFFERING(p)	(((p) << 27) & EP_CFG_BUFFERING_MASK)
+#define EP_CFG_BUFFERING_MAX	15
+
+/* EP_CMD - bitmasks */
+/* Endpoint reset. */
+#define EP_CMD_EPRST		BIT(0)
+/* Endpoint STALL set. */
+#define EP_CMD_SSTALL		BIT(1)
+/* Endpoint STALL clear. */
+#define EP_CMD_CSTALL		BIT(2)
+/* Send ERDY TP. */
+#define EP_CMD_ERDY		BIT(3)
+/* Request complete. */
+#define EP_CMD_REQ_CMPL		BIT(5)
+/* Transfer descriptor ready. */
+#define EP_CMD_DRDY		BIT(6)
+/* Data flush. */
+#define EP_CMD_DFLUSH		BIT(7)
+/*
+ * Transfer Descriptor Length write  (used only for Bulk Stream capable
+ * endpoints in SS mode).
+ * Bit Removed from DEV_VER_V3 controller version.
+ */
+#define EP_CMD_STDL		BIT(8)
+/*
+ * Transfer Descriptor Length (used only in SS mode for bulk endpoints).
+ * Bits Removed from DEV_VER_V3 controller version.
+ */
+#define EP_CMD_TDL_MASK		GENMASK(15, 9)
+#define EP_CMD_TDL_SET(p)	(((p) << 9) & EP_CMD_TDL_MASK)
+#define EP_CMD_TDL_GET(p)	(((p) & EP_CMD_TDL_MASK) >> 9)
+#define EP_CMD_TDL_MAX		(EP_CMD_TDL_MASK >> 9)
+
+/* ERDY Stream ID value (used in SS mode). */
+#define EP_CMD_ERDY_SID_MASK	GENMASK(31, 16)
+#define EP_CMD_ERDY_SID(p)	(((p) << 16) & EP_CMD_ERDY_SID_MASK)
+
+/* EP_STS - bitmasks */
+/* Setup transfer complete. */
+#define EP_STS_SETUP		BIT(0)
+/* Endpoint STALL status. */
+#define EP_STS_STALL(p)		((p) & BIT(1))
+/* Interrupt On Complete. */
+#define EP_STS_IOC		BIT(2)
+/* Interrupt on Short Packet. */
+#define EP_STS_ISP		BIT(3)
+/* Transfer descriptor missing. */
+#define EP_STS_DESCMIS		BIT(4)
+/* Stream Rejected (used only in SS mode) */
+#define EP_STS_STREAMR		BIT(5)
+/* EXIT from MOVE DATA State (used only for stream transfers in SS mode). */
+#define EP_STS_MD_EXIT		BIT(6)
+/* TRB error. */
+#define EP_STS_TRBERR		BIT(7)
+/* Not ready (used only in SS mode). */
+#define EP_STS_NRDY		BIT(8)
+/* DMA busy bit. */
+#define EP_STS_DBUSY		BIT(9)
+/* Endpoint Buffer Empty */
+#define EP_STS_BUFFEMPTY(p)	((p) & BIT(10))
+/* Current Cycle Status */
+#define EP_STS_CCS(p)		((p) & BIT(11))
+/* Prime (used only in SS mode. */
+#define EP_STS_PRIME		BIT(12)
+/* Stream error (used only in SS mode). */
+#define EP_STS_SIDERR		BIT(13)
+/* OUT size mismatch. */
+#define EP_STS_OUTSMM		BIT(14)
+/* ISO transmission error. */
+#define EP_STS_ISOERR		BIT(15)
+/* Host Packet Pending (only for SS mode). */
+#define EP_STS_HOSTPP(p)	((p) & BIT(16))
+/* Stream Protocol State Machine State (only for Bulk stream endpoints). */
+#define EP_STS_SPSMST_MASK		GENMASK(18, 17)
+#define EP_STS_SPSMST_DISABLED(p)	(((p) & EP_STS_SPSMST_MASK) >> 17)
+#define EP_STS_SPSMST_IDLE(p)		(((p) & EP_STS_SPSMST_MASK) >> 17)
+#define EP_STS_SPSMST_START_STREAM(p)	(((p) & EP_STS_SPSMST_MASK) >> 17)
+#define EP_STS_SPSMST_MOVE_DATA(p)	(((p) & EP_STS_SPSMST_MASK) >> 17)
+/* Interrupt On Transfer complete. */
+#define EP_STS_IOT		BIT(19)
+/* OUT queue endpoint number. */
+#define EP_STS_OUTQ_NO_MASK	GENMASK(27, 24)
+#define EP_STS_OUTQ_NO(p)	(((p) & EP_STS_OUTQ_NO_MASK) >> 24)
+/* OUT queue valid flag. */
+#define EP_STS_OUTQ_VAL_MASK	BIT(28)
+#define EP_STS_OUTQ_VAL(p)	((p) & EP_STS_OUTQ_VAL_MASK)
+/* SETUP WAIT. */
+#define EP_STS_STPWAIT		BIT(31)
+
+/* EP_STS_SID - bitmasks */
+/* Stream ID (used only in SS mode). */
+#define EP_STS_SID_MASK		GENMASK(15, 0)
+#define EP_STS_SID(p)		((p) & EP_STS_SID_MASK)
+
+/* EP_STS_EN - bitmasks */
+/* SETUP interrupt enable. */
+#define EP_STS_EN_SETUPEN	BIT(0)
+/* OUT transfer missing descriptor enable. */
+#define EP_STS_EN_DESCMISEN	BIT(4)
+/* Stream Rejected enable. */
+#define EP_STS_EN_STREAMREN	BIT(5)
+/* Move Data Exit enable.*/
+#define EP_STS_EN_MD_EXITEN	BIT(6)
+/* TRB enable. */
+#define EP_STS_EN_TRBERREN	BIT(7)
+/* NRDY enable. */
+#define EP_STS_EN_NRDYEN	BIT(8)
+/* Prime enable. */
+#define EP_STS_EN_PRIMEEEN	BIT(12)
+/* Stream error enable. */
+#define EP_STS_EN_SIDERREN	BIT(13)
+/* OUT size mismatch enable. */
+#define EP_STS_EN_OUTSMMEN	BIT(14)
+/* ISO transmission error enable. */
+#define EP_STS_EN_ISOERREN	BIT(15)
+/* Interrupt on Transmission complete enable. */
+#define EP_STS_EN_IOTEN		BIT(19)
+/* Setup Wait interrupt enable. */
+#define EP_STS_EN_STPWAITEN	BIT(31)
+
+/* DRBL- bitmasks */
+#define DB_VALUE_BY_INDEX(index) (1 << (index))
+#define DB_VALUE_EP0_OUT	BIT(0)
+#define DB_VALUE_EP0_IN		BIT(16)
+
+/* EP_IEN - bitmasks */
+#define EP_IEN(index)		(1 << (index))
+#define EP_IEN_EP_OUT0		BIT(0)
+#define EP_IEN_EP_IN0		BIT(16)
+
+/* EP_ISTS - bitmasks */
+#define EP_ISTS(index)		(1 << (index))
+#define EP_ISTS_EP_OUT0		BIT(0)
+#define EP_ISTS_EP_IN0		BIT(16)
+
+/* USB_PWR- bitmasks */
+/*Power Shut Off capability enable*/
+#define PUSB_PWR_PSO_EN		BIT(0)
+/*Power Shut Off capability disable*/
+#define PUSB_PWR_PSO_DS		BIT(1)
+/*
+ * Enables turning-off Reference Clock.
+ * This bit is optional and implemented only when support for OTG is
+ * implemented (indicated by OTG_READY bit set to '1').
+ */
+#define PUSB_PWR_STB_CLK_SWITCH_EN	BIT(8)
+/*
+ * Status bit indicating that operation required by STB_CLK_SWITCH_EN write
+ * is completed
+ */
+#define PUSB_PWR_STB_CLK_SWITCH_DONE	BIT(9)
+/* This bit informs if Fast Registers Access is enabled. */
+#define PUSB_PWR_FST_REG_ACCESS_STAT	BIT(30)
+/* Fast Registers Access Enable. */
+#define PUSB_PWR_FST_REG_ACCESS		BIT(31)
+
+/* USB_CONF2- bitmasks */
+/*
+ * Writing 1 disables TDL calculation basing on TRB feature in controller
+ * for DMULT mode.
+ * Bit supported only for DEV_VER_V2 version.
+ */
+#define USB_CONF2_DIS_TDL_TRB		BIT(1)
+/*
+ * Writing 1 enables TDL calculation basing on TRB feature in controller
+ * for DMULT mode.
+ * Bit supported only for DEV_VER_V2 version.
+ */
+#define USB_CONF2_EN_TDL_TRB		BIT(2)
+
+/* USB_CAP1- bitmasks */
+/*
+ * SFR Interface type
+ * These field reflects type of SFR interface implemented:
+ * 0x0 - OCP
+ * 0x1 - AHB,
+ * 0x2 - PLB
+ * 0x3 - AXI
+ * 0x4-0xF - reserved
+ */
+#define USB_CAP1_SFR_TYPE_MASK	GENMASK(3, 0)
+#define DEV_SFR_TYPE_OCP(p)	(((p) & USB_CAP1_SFR_TYPE_MASK) == 0x0)
+#define DEV_SFR_TYPE_AHB(p)	(((p) & USB_CAP1_SFR_TYPE_MASK) == 0x1)
+#define DEV_SFR_TYPE_PLB(p)	(((p) & USB_CAP1_SFR_TYPE_MASK) == 0x2)
+#define DEV_SFR_TYPE_AXI(p)	(((p) & USB_CAP1_SFR_TYPE_MASK) == 0x3)
+/*
+ * SFR Interface width
+ * These field reflects width of SFR interface implemented:
+ * 0x0 - 8 bit interface,
+ * 0x1 - 16 bit interface,
+ * 0x2 - 32 bit interface
+ * 0x3 - 64 bit interface
+ * 0x4-0xF - reserved
+ */
+#define USB_CAP1_SFR_WIDTH_MASK	GENMASK(7, 4)
+#define DEV_SFR_WIDTH_8(p)	(((p) & USB_CAP1_SFR_WIDTH_MASK) == (0x0 << 4))
+#define DEV_SFR_WIDTH_16(p)	(((p) & USB_CAP1_SFR_WIDTH_MASK) == (0x1 << 4))
+#define DEV_SFR_WIDTH_32(p)	(((p) & USB_CAP1_SFR_WIDTH_MASK) == (0x2 << 4))
+#define DEV_SFR_WIDTH_64(p)	(((p) & USB_CAP1_SFR_WIDTH_MASK) == (0x3 << 4))
+/*
+ * DMA Interface type
+ * These field reflects type of DMA interface implemented:
+ * 0x0 - OCP
+ * 0x1 - AHB,
+ * 0x2 - PLB
+ * 0x3 - AXI
+ * 0x4-0xF - reserved
+ */
+#define USB_CAP1_DMA_TYPE_MASK	GENMASK(11, 8)
+#define DEV_DMA_TYPE_OCP(p)	(((p) & USB_CAP1_DMA_TYPE_MASK) == (0x0 << 8))
+#define DEV_DMA_TYPE_AHB(p)	(((p) & USB_CAP1_DMA_TYPE_MASK) == (0x1 << 8))
+#define DEV_DMA_TYPE_PLB(p)	(((p) & USB_CAP1_DMA_TYPE_MASK) == (0x2 << 8))
+#define DEV_DMA_TYPE_AXI(p)	(((p) & USB_CAP1_DMA_TYPE_MASK) == (0x3 << 8))
+/*
+ * DMA Interface width
+ * These field reflects width of DMA interface implemented:
+ * 0x0 - reserved,
+ * 0x1 - reserved,
+ * 0x2 - 32 bit interface
+ * 0x3 - 64 bit interface
+ * 0x4-0xF - reserved
+ */
+#define USB_CAP1_DMA_WIDTH_MASK	GENMASK(15, 12)
+#define DEV_DMA_WIDTH_32(p)	(((p) & USB_CAP1_DMA_WIDTH_MASK) == (0x2 << 12))
+#define DEV_DMA_WIDTH_64(p)	(((p) & USB_CAP1_DMA_WIDTH_MASK) == (0x3 << 12))
+/*
+ * USB3 PHY Interface type
+ * These field reflects type of USB3 PHY interface implemented:
+ * 0x0 - USB PIPE,
+ * 0x1 - RMMI,
+ * 0x2-0xF - reserved
+ */
+#define USB_CAP1_U3PHY_TYPE_MASK GENMASK(19, 16)
+#define DEV_U3PHY_PIPE(p) (((p) & USB_CAP1_U3PHY_TYPE_MASK) == (0x0 << 16))
+#define DEV_U3PHY_RMMI(p) (((p) & USB_CAP1_U3PHY_TYPE_MASK) == (0x1 << 16))
+/*
+ * USB3 PHY Interface width
+ * These field reflects width of USB3 PHY interface implemented:
+ * 0x0 - 8 bit PIPE interface,
+ * 0x1 - 16 bit PIPE interface,
+ * 0x2 - 32 bit PIPE interface,
+ * 0x3 - 64 bit PIPE interface
+ * 0x4-0xF - reserved
+ * Note: When SSIC interface is implemented this field shows the width of
+ * internal PIPE interface. The RMMI interface is always 20bit wide.
+ */
+#define USB_CAP1_U3PHY_WIDTH_MASK GENMASK(23, 20)
+#define DEV_U3PHY_WIDTH_8(p) \
+	(((p) & USB_CAP1_U3PHY_WIDTH_MASK) == (0x0 << 20))
+#define DEV_U3PHY_WIDTH_16(p) \
+	(((p) & USB_CAP1_U3PHY_WIDTH_MASK) == (0x1 << 16))
+#define DEV_U3PHY_WIDTH_32(p) \
+	(((p) & USB_CAP1_U3PHY_WIDTH_MASK) == (0x2 << 20))
+#define DEV_U3PHY_WIDTH_64(p) \
+	(((p) & USB_CAP1_U3PHY_WIDTH_MASK) == (0x3 << 16))
+
+/*
+ * USB2 PHY Interface enable
+ * These field informs if USB2 PHY interface is implemented:
+ * 0x0 - interface NOT implemented,
+ * 0x1 - interface implemented
+ */
+#define USB_CAP1_U2PHY_EN(p)	((p) & BIT(24))
+/*
+ * USB2 PHY Interface type
+ * These field reflects type of USB2 PHY interface implemented:
+ * 0x0 - UTMI,
+ * 0x1 - ULPI
+ */
+#define DEV_U2PHY_ULPI(p)	((p) & BIT(25))
+/*
+ * USB2 PHY Interface width
+ * These field reflects width of USB2 PHY interface implemented:
+ * 0x0 - 8 bit interface,
+ * 0x1 - 16 bit interface,
+ * Note: The ULPI interface is always 8bit wide.
+ */
+#define DEV_U2PHY_WIDTH_16(p)	((p) & BIT(26))
+/*
+ * OTG Ready
+ * 0x0 - pure device mode
+ * 0x1 - some features and ports for CDNS USB OTG controller are implemented.
+ */
+#define USB_CAP1_OTG_READY(p)	((p) & BIT(27))
+
+/*
+ * When set, indicates that controller supports automatic internal TDL
+ * calculation basing on the size provided in TRB (TRB[22:17]) for DMULT mode
+ * Supported only for DEV_VER_V2 controller version.
+ */
+#define USB_CAP1_TDL_FROM_TRB(p)	((p) & BIT(28))
+
+/* USB_CAP2- bitmasks */
+/*
+ * The actual size of the connected On-chip RAM memory in kB:
+ * - 0 means 256 kB (max supported mem size)
+ * - value other than 0 reflects the mem size in kB
+ */
+#define USB_CAP2_ACTUAL_MEM_SIZE(p) ((p) & GENMASK(7, 0))
+/*
+ * Max supported mem size
+ * These field reflects width of on-chip RAM address bus width,
+ * which determines max supported mem size:
+ * 0x0-0x7 - reserved,
+ * 0x8 - support for 4kB mem,
+ * 0x9 - support for 8kB mem,
+ * 0xA - support for 16kB mem,
+ * 0xB - support for 32kB mem,
+ * 0xC - support for 64kB mem,
+ * 0xD - support for 128kB mem,
+ * 0xE - support for 256kB mem,
+ * 0xF - reserved
+ */
+#define USB_CAP2_MAX_MEM_SIZE(p) ((p) & GENMASK(11, 8))
+
+/* USB_CAP3- bitmasks */
+#define EP_IS_IMPLEMENTED(reg, index) ((reg) & (1 << (index)))
+
+/* USB_CAP4- bitmasks */
+#define EP_SUPPORT_ISO(reg, index) ((reg) & (1 << (index)))
+
+/* USB_CAP5- bitmasks */
+#define EP_SUPPORT_STREAM(reg, index) ((reg) & (1 << (index)))
+
+/* USB_CAP6- bitmasks */
+/* The USBSS-DEV Controller  Internal build number. */
+#define GET_DEV_BASE_VERSION(p) ((p) & GENMASK(23, 0))
+/* The USBSS-DEV Controller version number. */
+#define GET_DEV_CUSTOM_VERSION(p) ((p) & GENMASK(31, 24))
+
+#define DEV_VER_NXP_V1		0x00024502
+#define DEV_VER_TI_V1		0x00024509
+#define DEV_VER_V2		0x0002450C
+#define DEV_VER_V3		0x0002450d
+
+/* DBG_LINK1- bitmasks */
+/*
+ * LFPS_MIN_DET_U1_EXIT value This parameter configures the minimum
+ * time required for decoding the received LFPS as an LFPS.U1_Exit.
+ */
+#define DBG_LINK1_LFPS_MIN_DET_U1_EXIT(p)	((p) & GENMASK(7, 0))
+/*
+ * LFPS_MIN_GEN_U1_EXIT value This parameter configures the minimum time for
+ * phytxelecidle deassertion when LFPS.U1_Exit
+ */
+#define DBG_LINK1_LFPS_MIN_GEN_U1_EXIT_MASK	GENMASK(15, 8)
+#define DBG_LINK1_LFPS_MIN_GEN_U1_EXIT(p)	(((p) << 8) & GENMASK(15, 8))
+/*
+ * RXDET_BREAK_DIS value This parameter configures terminating the Far-end
+ * Receiver termination detection sequence:
+ * 0: it is possible that USBSS_DEV will terminate Farend receiver
+ *    termination detection sequence
+ * 1: USBSS_DEV will not terminate Far-end receiver termination
+ *    detection sequence
+ */
+#define DBG_LINK1_RXDET_BREAK_DIS		BIT(16)
+/* LFPS_GEN_PING value This parameter configures the LFPS.Ping generation */
+#define DBG_LINK1_LFPS_GEN_PING(p)		(((p) << 17) & GENMASK(21, 17))
+/*
+ * Set the LFPS_MIN_DET_U1_EXIT value Writing '1' to this bit writes the
+ * LFPS_MIN_DET_U1_EXIT field value to the device. This bit is automatically
+ * cleared. Writing '0' has no effect
+ */
+#define DBG_LINK1_LFPS_MIN_DET_U1_EXIT_SET	BIT(24)
+/*
+ * Set the LFPS_MIN_GEN_U1_EXIT value. Writing '1' to this bit writes the
+ * LFPS_MIN_GEN_U1_EXIT field value to the device. This bit is automatically
+ * cleared. Writing '0' has no effect
+ */
+#define DBG_LINK1_LFPS_MIN_GEN_U1_EXIT_SET	BIT(25)
+/*
+ * Set the RXDET_BREAK_DIS value Writing '1' to this bit writes
+ * the RXDET_BREAK_DIS field value to the device. This bit is automatically
+ * cleared. Writing '0' has no effect
+ */
+#define DBG_LINK1_RXDET_BREAK_DIS_SET		BIT(26)
+/*
+ * Set the LFPS_GEN_PING_SET value Writing '1' to this bit writes
+ * the LFPS_GEN_PING field value to the device. This bit is automatically
+ * cleared. Writing '0' has no effect."
+ */
+#define DBG_LINK1_LFPS_GEN_PING_SET		BIT(27)
+
+/* DMA_AXI_CTRL- bitmasks */
+/* The mawprot pin configuration. */
+#define DMA_AXI_CTRL_MARPROT(p) ((p) & GENMASK(2, 0))
+/* The marprot pin configuration. */
+#define DMA_AXI_CTRL_MAWPROT(p) (((p) & GENMASK(2, 0)) << 16)
+#define DMA_AXI_CTRL_NON_SECURE 0x02
+
+#define gadget_to_cdns3_device(g) (container_of(g, struct cdns3_device, gadget))
+
+#define ep_to_cdns3_ep(ep) (container_of(ep, struct cdns3_endpoint, endpoint))
+
+/*-------------------------------------------------------------------------*/
+/*
+ * USBSS-DEV DMA interface.
+ */
+#define TRBS_PER_SEGMENT	600
+
+#define ISO_MAX_INTERVAL	10
+
+#define MAX_TRB_LENGTH          BIT(16)
+
+#if TRBS_PER_SEGMENT < 2
+#error "Incorrect TRBS_PER_SEGMENT. Minimal Transfer Ring size is 2."
+#endif
+
+#define TRBS_PER_STREAM_SEGMENT 2
+
+#if TRBS_PER_STREAM_SEGMENT < 2
+#error "Incorrect TRBS_PER_STREAMS_SEGMENT. Minimal Transfer Ring size is 2."
+#endif
+
+/*
+ *Only for ISOC endpoints - maximum number of TRBs is calculated as
+ * pow(2, bInterval-1) * number of usb requests. It is limitation made by
+ * driver to save memory. Controller must prepare TRB for each ITP even
+ * if bInterval > 1. It's the reason why driver needs so many TRBs for
+ * isochronous endpoints.
+ */
+#define TRBS_PER_ISOC_SEGMENT	(ISO_MAX_INTERVAL * 8)
+
+#define GET_TRBS_PER_SEGMENT(ep_type) ((ep_type) == USB_ENDPOINT_XFER_ISOC ? \
+				      TRBS_PER_ISOC_SEGMENT : TRBS_PER_SEGMENT)
+/**
+ * struct cdns3_trb - represent Transfer Descriptor block.
+ * @buffer:	pointer to buffer data
+ * @length:	length of data
+ * @control:	control flags.
+ *
+ * This structure describes transfer block serviced by DMA module.
+ */
+struct cdns3_trb {
+	__le32 buffer;
+	__le32 length;
+	__le32 control;
+};
+
+#define TRB_SIZE		(sizeof(struct cdns3_trb))
+#define TRB_RING_SIZE		(TRB_SIZE * TRBS_PER_SEGMENT)
+#define TRB_STREAM_RING_SIZE	(TRB_SIZE * TRBS_PER_STREAM_SEGMENT)
+#define TRB_ISO_RING_SIZE	(TRB_SIZE * TRBS_PER_ISOC_SEGMENT)
+#define TRB_CTRL_RING_SIZE	(TRB_SIZE * 2)
+
+/* TRB bit mask */
+#define TRB_TYPE_BITMASK	GENMASK(15, 10)
+#define TRB_TYPE(p)		((p) << 10)
+#define TRB_FIELD_TO_TYPE(p)	(((p) & TRB_TYPE_BITMASK) >> 10)
+
+/* TRB type IDs */
+/* bulk, interrupt, isoc , and control data stage */
+#define TRB_NORMAL		1
+/* TRB for linking ring segments */
+#define TRB_LINK		6
+
+/* Cycle bit - indicates TRB ownership by driver or hw*/
+#define TRB_CYCLE		BIT(0)
+/*
+ * When set to '1', the device will toggle its interpretation of the Cycle bit
+ */
+#define TRB_TOGGLE		BIT(1)
+/*
+ * The controller will set it if OUTSMM (OUT size mismatch) is detected,
+ * this bit is for normal TRB
+ */
+#define TRB_SMM			BIT(1)
+
+/*
+ * Short Packet (SP). OUT EPs at DMULT=1 only. Indicates if the TRB was
+ * processed while USB short packet was received. No more buffers defined by
+ * the TD will be used. DMA will automatically advance to next TD.
+ * - Shall be set to 0 by Software when putting TRB on the Transfer Ring
+ * - Shall be set to 1 by Controller when Short Packet condition for this TRB
+ *   is detected independent if ISP is set or not.
+ */
+#define TRB_SP			BIT(1)
+
+/* Interrupt on short packet*/
+#define TRB_ISP			BIT(2)
+/*Setting this bit enables FIFO DMA operation mode*/
+#define TRB_FIFO_MODE		BIT(3)
+/* Set PCIe no snoop attribute */
+#define TRB_CHAIN		BIT(4)
+/* Interrupt on completion */
+#define TRB_IOC			BIT(5)
+
+/* stream ID bitmasks. */
+#define TRB_STREAM_ID_BITMASK		GENMASK(31, 16)
+#define TRB_STREAM_ID(p)		((p) << 16)
+#define TRB_FIELD_TO_STREAMID(p)	(((p) & TRB_STREAM_ID_BITMASK) >> 16)
+
+/* Size of TD expressed in USB packets for HS/FS mode. */
+#define TRB_TDL_HS_SIZE(p)	(((p) << 16) & GENMASK(31, 16))
+#define TRB_TDL_HS_SIZE_GET(p)	(((p) & GENMASK(31, 16)) >> 16)
+
+/* transfer_len bitmasks. */
+#define TRB_LEN(p)		((p) & GENMASK(16, 0))
+
+/* Size of TD expressed in USB packets for SS mode. */
+#define TRB_TDL_SS_SIZE(p)	(((p) << 17) & GENMASK(23, 17))
+#define TRB_TDL_SS_SIZE_GET(p)	(((p) & GENMASK(23, 17)) >> 17)
+
+/* transfer_len bitmasks - bits 31:24 */
+#define TRB_BURST_LEN(p)	((unsigned int)((p) << 24) & GENMASK(31, 24))
+#define TRB_BURST_LEN_GET(p)	(((p) & GENMASK(31, 24)) >> 24)
+
+/* Data buffer pointer bitmasks*/
+#define TRB_BUFFER(p)		((p) & GENMASK(31, 0))
+
+/*-------------------------------------------------------------------------*/
+/* Driver numeric constants */
+
+/* Such declaration should be added to ch9.h */
+#define USB_DEVICE_MAX_ADDRESS		127
+
+/* Endpoint init values */
+#define CDNS3_EP_MAX_PACKET_LIMIT	1024
+#define CDNS3_EP_MAX_STREAMS		15
+#define CDNS3_EP0_MAX_PACKET_LIMIT	512
+
+/* All endpoints including EP0 */
+#define CDNS3_ENDPOINTS_MAX_COUNT	32
+#define CDNS3_EP_ZLP_BUF_SIZE		1024
+
+#define CDNS3_MAX_NUM_DESCMISS_BUF	32
+#define CDNS3_DESCMIS_BUF_SIZE		2048	/* Bytes */
+#define CDNS3_WA2_NUM_BUFFERS		128
+/*-------------------------------------------------------------------------*/
+/* Used structs */
+
+struct cdns3_device;
+
+/**
+ * struct cdns3_endpoint - extended device side representation of USB endpoint.
+ * @endpoint: usb endpoint
+ * @pending_req_list: list of requests queuing on transfer ring.
+ * @deferred_req_list: list of requests waiting for queuing on transfer ring.
+ * @wa2_descmiss_req_list: list of requests internally allocated by driver.
+ * @trb_pool: transfer ring - array of transaction buffers
+ * @trb_pool_dma: dma address of transfer ring
+ * @cdns3_dev: device associated with this endpoint
+ * @name: a human readable name e.g. ep1out
+ * @flags: specify the current state of endpoint
+ * @descmis_req: internal transfer object used for getting data from on-chip
+ *     buffer. It can happen only if function driver doesn't send usb_request
+ *     object on time.
+ * @dir: endpoint direction
+ * @num: endpoint number (1 - 15)
+ * @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK
+ * @interval: interval between packets used for ISOC endpoint.
+ * @free_trbs: number of free TRBs in transfer ring
+ * @num_trbs: number of all TRBs in transfer ring
+ * @alloc_ring_size: size of the allocated TRB ring
+ * @pcs: producer cycle state
+ * @ccs: consumer cycle state
+ * @enqueue: enqueue index in transfer ring
+ * @dequeue: dequeue index in transfer ring
+ * @trb_burst_size: number of burst used in trb.
+ */
+struct cdns3_endpoint {
+	struct usb_ep		endpoint;
+	struct list_head	pending_req_list;
+	struct list_head	deferred_req_list;
+	struct list_head	wa2_descmiss_req_list;
+	int			wa2_counter;
+
+	struct cdns3_trb	*trb_pool;
+	dma_addr_t		trb_pool_dma;
+
+	struct cdns3_device	*cdns3_dev;
+	char			name[20];
+
+#define EP_ENABLED		BIT(0)
+#define EP_STALLED		BIT(1)
+#define EP_STALL_PENDING	BIT(2)
+#define EP_WEDGE		BIT(3)
+#define EP_TRANSFER_STARTED	BIT(4)
+#define EP_UPDATE_EP_TRBADDR	BIT(5)
+#define EP_PENDING_REQUEST	BIT(6)
+#define EP_RING_FULL		BIT(7)
+#define EP_CLAIMED		BIT(8)
+#define EP_DEFERRED_DRDY	BIT(9)
+#define EP_QUIRK_ISO_OUT_EN	BIT(10)
+#define EP_QUIRK_END_TRANSFER	BIT(11)
+#define EP_QUIRK_EXTRA_BUF_DET	BIT(12)
+#define EP_QUIRK_EXTRA_BUF_EN	BIT(13)
+#define EP_TDLCHK_EN		BIT(15)
+#define EP_CONFIGURED		BIT(16)
+	u32			flags;
+
+	struct cdns3_request	*descmis_req;
+
+	u8			dir;
+	u8			num;
+	u8			type;
+	u8			mult;
+	u8			bMaxBurst;
+	u16			wMaxPacketSize;
+	int			interval;
+
+	int			free_trbs;
+	int			num_trbs;
+	int			alloc_ring_size;
+	u8			pcs;
+	u8			ccs;
+	int			enqueue;
+	int			dequeue;
+	u8			trb_burst_size;
+
+	unsigned int		wa1_set:1;
+	struct cdns3_trb	*wa1_trb;
+	unsigned int		wa1_trb_index;
+	unsigned int		wa1_cycle_bit:1;
+
+	/* Stream related */
+	unsigned int		use_streams:1;
+	unsigned int		prime_flag:1;
+	u32			ep_sts_pending;
+	u16			last_stream_id;
+	u16			pending_tdl;
+	unsigned int		stream_sg_idx;
+};
+
+/**
+ * struct cdns3_aligned_buf - represent aligned buffer used for DMA transfer
+ * @buf: aligned to 8 bytes data buffer. Buffer address used in
+ *       TRB shall be aligned to 8.
+ * @dma: dma address
+ * @size: size of buffer
+ * @in_use: inform if this buffer is associated with usb_request
+ * @list: used to adding instance of this object to list
+ */
+struct cdns3_aligned_buf {
+	void			*buf;
+	dma_addr_t		dma;
+	u32			size;
+	enum dma_data_direction dir;
+	unsigned		in_use:1;
+	struct list_head	list;
+};
+
+/**
+ * struct cdns3_request - extended device side representation of usb_request
+ *                        object .
+ * @request: generic usb_request object describing single I/O request.
+ * @priv_ep: extended representation of usb_ep object
+ * @trb: the first TRB association with this request
+ * @start_trb: number of the first TRB in transfer ring
+ * @end_trb: number of the last TRB in transfer ring
+ * @aligned_buf: object holds information about aligned buffer associated whit
+ *               this endpoint
+ * @flags: flag specifying special usage of request
+ * @list: used by internally allocated request to add to wa2_descmiss_req_list.
+ * @finished_trb: number of trb has already finished per request
+ * @num_of_trb: how many trbs in this request
+ */
+struct cdns3_request {
+	struct usb_request		request;
+	struct cdns3_endpoint		*priv_ep;
+	struct cdns3_trb		*trb;
+	int				start_trb;
+	int				end_trb;
+	struct cdns3_aligned_buf	*aligned_buf;
+#define REQUEST_PENDING			BIT(0)
+#define REQUEST_INTERNAL		BIT(1)
+#define REQUEST_INTERNAL_CH		BIT(2)
+#define REQUEST_ZLP			BIT(3)
+#define REQUEST_UNALIGNED		BIT(4)
+	u32				flags;
+	struct list_head		list;
+	int				finished_trb;
+	int				num_of_trb;
+};
+
+#define to_cdns3_request(r) (container_of(r, struct cdns3_request, request))
+
+/*Stages used during enumeration process.*/
+#define CDNS3_SETUP_STAGE		0x0
+#define CDNS3_DATA_STAGE		0x1
+#define CDNS3_STATUS_STAGE		0x2
+
+/**
+ * struct cdns3_device - represent USB device.
+ * @dev: pointer to device structure associated whit this controller
+ * @sysdev: pointer to the DMA capable device
+ * @gadget: device side representation of the peripheral controller
+ * @gadget_driver: pointer to the gadget driver
+ * @dev_ver: device controller version.
+ * @lock: for synchronizing
+ * @regs: base address for device side registers
+ * @setup_buf: used while processing usb control requests
+ * @setup_dma: dma address for setup_buf
+ * @zlp_buf - zlp buffer
+ * @ep0_stage: ep0 stage during enumeration process.
+ * @ep0_data_dir: direction for control transfer
+ * @eps: array of pointers to all endpoints with exclusion ep0
+ * @aligned_buf_list: list of aligned buffers internally allocated by driver
+ * @aligned_buf_wq: workqueue freeing  no longer used aligned buf.
+ * @selected_ep: actually selected endpoint. It's used only to improve
+ *               performance.
+ * @isoch_delay: value from Set Isoch Delay request. Only valid on SS/SSP.
+ * @u1_allowed: allow device transition to u1 state
+ * @u2_allowed: allow device transition to u2 state
+ * @is_selfpowered: device is self powered
+ * @setup_pending: setup packet is processing by gadget driver
+ * @hw_configured_flag: hardware endpoint configuration was set.
+ * @wake_up_flag: allow device to remote up the host
+ * @status_completion_no_call: indicate that driver is waiting for status s
+ *     stage completion. It's used in deferred SET_CONFIGURATION request.
+ * @onchip_buffers: number of available on-chip buffers.
+ * @onchip_used_size: actual size of on-chip memory assigned to endpoints.
+ * @pending_status_wq: workqueue handling status stage for deferred requests.
+ * @pending_status_request: request for which status stage was deferred
+ */
+struct cdns3_device {
+	struct device			*dev;
+	struct device			*sysdev;
+
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*gadget_driver;
+
+#define CDNS_REVISION_V0		0x00024501
+#define CDNS_REVISION_V1		0x00024509
+	u32				dev_ver;
+
+	/* generic spin-lock for drivers */
+	spinlock_t			lock;
+
+	struct cdns3_usb_regs		__iomem *regs;
+
+	struct dma_pool			*eps_dma_pool;
+	struct usb_ctrlrequest		*setup_buf;
+	dma_addr_t			setup_dma;
+	void				*zlp_buf;
+
+	u8				ep0_stage;
+	int				ep0_data_dir;
+
+	struct cdns3_endpoint		*eps[CDNS3_ENDPOINTS_MAX_COUNT];
+
+	struct list_head		aligned_buf_list;
+	struct work_struct		aligned_buf_wq;
+
+	u32				selected_ep;
+	u16				isoch_delay;
+
+	unsigned			wait_for_setup:1;
+	unsigned			u1_allowed:1;
+	unsigned			u2_allowed:1;
+	unsigned			is_selfpowered:1;
+	unsigned			setup_pending:1;
+	unsigned			hw_configured_flag:1;
+	unsigned			wake_up_flag:1;
+	unsigned			status_completion_no_call:1;
+	unsigned			using_streams:1;
+	int				out_mem_is_allocated;
+
+	struct work_struct		pending_status_wq;
+	struct usb_request		*pending_status_request;
+
+	/*in KB */
+	u16				onchip_buffers;
+	u16				onchip_used_size;
+
+	u16				ep_buf_size;
+	u16				ep_iso_burst;
+};
+
+void cdns3_set_register_bit(void __iomem *ptr, u32 mask);
+dma_addr_t cdns3_trb_virt_to_dma(struct cdns3_endpoint *priv_ep,
+				 struct cdns3_trb *trb);
+enum usb_device_speed cdns3_get_speed(struct cdns3_device *priv_dev);
+void cdns3_pending_setup_status_handler(struct work_struct *work);
+void cdns3_hw_reset_eps_config(struct cdns3_device *priv_dev);
+void cdns3_set_hw_configuration(struct cdns3_device *priv_dev);
+void cdns3_select_ep(struct cdns3_device *priv_dev, u32 ep);
+void cdns3_allow_enable_l1(struct cdns3_device *priv_dev, int enable);
+struct usb_request *cdns3_next_request(struct list_head *list);
+void cdns3_rearm_transfer(struct cdns3_endpoint *priv_ep, u8 rearm);
+int cdns3_allocate_trb_pool(struct cdns3_endpoint *priv_ep);
+u8 cdns3_ep_addr_to_index(u8 ep_addr);
+int cdns3_gadget_ep_set_wedge(struct usb_ep *ep);
+int cdns3_gadget_ep_set_halt(struct usb_ep *ep, int value);
+void __cdns3_gadget_ep_set_halt(struct cdns3_endpoint *priv_ep);
+int __cdns3_gadget_ep_clear_halt(struct cdns3_endpoint *priv_ep);
+struct usb_request *cdns3_gadget_ep_alloc_request(struct usb_ep *ep,
+						  gfp_t gfp_flags);
+void cdns3_gadget_ep_free_request(struct usb_ep *ep,
+				  struct usb_request *request);
+int cdns3_gadget_ep_dequeue(struct usb_ep *ep, struct usb_request *request);
+void cdns3_gadget_giveback(struct cdns3_endpoint *priv_ep,
+			   struct cdns3_request *priv_req,
+			   int status);
+
+int cdns3_init_ep0(struct cdns3_device *priv_dev,
+		   struct cdns3_endpoint *priv_ep);
+void cdns3_ep0_config(struct cdns3_device *priv_dev);
+int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable);
+void cdns3_check_ep0_interrupt_proceed(struct cdns3_device *priv_dev, int dir);
+int __cdns3_gadget_wakeup(struct cdns3_device *priv_dev);
+
+#endif /* __LINUX_CDNS3_GADGET */
diff --git a/drivers/usb/cdns3/cdns3-imx.c b/drivers/usb/cdns3/cdns3-imx.c
new file mode 100644
index 000000000..a2f041e17
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-imx.c
@@ -0,0 +1,437 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * cdns3-imx.c - NXP i.MX specific Glue layer for Cadence USB Controller
+ *
+ * Copyright (C) 2019 NXP
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/iopoll.h>
+#include <linux/pm_runtime.h>
+#include "core.h"
+
+#define USB3_CORE_CTRL1    0x00
+#define USB3_CORE_CTRL2    0x04
+#define USB3_INT_REG       0x08
+#define USB3_CORE_STATUS   0x0c
+#define XHCI_DEBUG_LINK_ST 0x10
+#define XHCI_DEBUG_BUS     0x14
+#define USB3_SSPHY_CTRL1   0x40
+#define USB3_SSPHY_CTRL2   0x44
+#define USB3_SSPHY_STATUS  0x4c
+#define USB2_PHY_CTRL1     0x50
+#define USB2_PHY_CTRL2     0x54
+#define USB2_PHY_STATUS    0x5c
+
+/* Register bits definition */
+
+/* USB3_CORE_CTRL1 */
+#define SW_RESET_MASK	GENMASK(31, 26)
+#define PWR_SW_RESET	BIT(31)
+#define APB_SW_RESET	BIT(30)
+#define AXI_SW_RESET	BIT(29)
+#define RW_SW_RESET	BIT(28)
+#define PHY_SW_RESET	BIT(27)
+#define PHYAHB_SW_RESET	BIT(26)
+#define ALL_SW_RESET	(PWR_SW_RESET | APB_SW_RESET | AXI_SW_RESET | \
+		RW_SW_RESET | PHY_SW_RESET | PHYAHB_SW_RESET)
+#define OC_DISABLE	BIT(9)
+#define MDCTRL_CLK_SEL	BIT(7)
+#define MODE_STRAP_MASK	(0x7)
+#define DEV_MODE	(1 << 2)
+#define HOST_MODE	(1 << 1)
+#define OTG_MODE	(1 << 0)
+
+/* USB3_INT_REG */
+#define CLK_125_REQ	BIT(29)
+#define LPM_CLK_REQ	BIT(28)
+#define DEVU3_WAEKUP_EN	BIT(14)
+#define OTG_WAKEUP_EN	BIT(12)
+#define DEV_INT_EN	(3 << 8) /* DEV INT b9:8 */
+#define HOST_INT1_EN	(1 << 0) /* HOST INT b7:0 */
+
+/* USB3_CORE_STATUS */
+#define MDCTRL_CLK_STATUS	BIT(15)
+#define DEV_POWER_ON_READY	BIT(13)
+#define HOST_POWER_ON_READY	BIT(12)
+
+/* USB3_SSPHY_STATUS */
+#define CLK_VALID_MASK		(0x3f << 26)
+#define CLK_VALID_COMPARE_BITS	(0xf << 28)
+#define PHY_REFCLK_REQ		(1 << 0)
+
+/* OTG registers definition */
+#define OTGSTS		0x4
+/* OTGSTS */
+#define OTG_NRDY	BIT(11)
+
+/* xHCI registers definition  */
+#define XECP_PM_PMCSR		0x8018
+#define XECP_AUX_CTRL_REG1	0x8120
+
+/* Register bits definition */
+/* XECP_AUX_CTRL_REG1 */
+#define CFG_RXDET_P3_EN		BIT(15)
+
+/* XECP_PM_PMCSR */
+#define PS_MASK			GENMASK(1, 0)
+#define PS_D0			0
+#define PS_D1			1
+
+struct cdns_imx {
+	struct device *dev;
+	void __iomem *noncore;
+	struct clk_bulk_data *clks;
+	int num_clks;
+	struct platform_device *cdns3_pdev;
+};
+
+static inline u32 cdns_imx_readl(struct cdns_imx *data, u32 offset)
+{
+	return readl(data->noncore + offset);
+}
+
+static inline void cdns_imx_writel(struct cdns_imx *data, u32 offset, u32 value)
+{
+	writel(value, data->noncore + offset);
+}
+
+static const struct clk_bulk_data imx_cdns3_core_clks[] = {
+	{ .id = "lpm" },
+	{ .id = "bus" },
+	{ .id = "aclk" },
+	{ .id = "ipg" },
+	{ .id = "core" },
+};
+
+static int cdns_imx_noncore_init(struct cdns_imx *data)
+{
+	u32 value;
+	int ret;
+	struct device *dev = data->dev;
+
+	cdns_imx_writel(data, USB3_SSPHY_STATUS, CLK_VALID_MASK);
+	udelay(1);
+	ret = readl_poll_timeout(data->noncore + USB3_SSPHY_STATUS, value,
+		(value & CLK_VALID_COMPARE_BITS) == CLK_VALID_COMPARE_BITS,
+		10, 100000);
+	if (ret) {
+		dev_err(dev, "wait clkvld timeout\n");
+		return ret;
+	}
+
+	value = cdns_imx_readl(data, USB3_CORE_CTRL1);
+	value |= ALL_SW_RESET;
+	cdns_imx_writel(data, USB3_CORE_CTRL1, value);
+	udelay(1);
+
+	value = cdns_imx_readl(data, USB3_CORE_CTRL1);
+	value = (value & ~MODE_STRAP_MASK) | OTG_MODE | OC_DISABLE;
+	cdns_imx_writel(data, USB3_CORE_CTRL1, value);
+
+	value = cdns_imx_readl(data, USB3_INT_REG);
+	value |= HOST_INT1_EN | DEV_INT_EN;
+	cdns_imx_writel(data, USB3_INT_REG, value);
+
+	value = cdns_imx_readl(data, USB3_CORE_CTRL1);
+	value &= ~ALL_SW_RESET;
+	cdns_imx_writel(data, USB3_CORE_CTRL1, value);
+	return ret;
+}
+
+static int cdns_imx_platform_suspend(struct device *dev,
+	bool suspend, bool wakeup);
+static struct cdns3_platform_data cdns_imx_pdata = {
+	.platform_suspend = cdns_imx_platform_suspend,
+	.quirks		  = CDNS3_DEFAULT_PM_RUNTIME_ALLOW,
+};
+
+static const struct of_dev_auxdata cdns_imx_auxdata[] = {
+	{
+		.compatible = "cdns,usb3",
+		.platform_data = &cdns_imx_pdata,
+	},
+	{},
+};
+
+static int cdns_imx_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
+	struct cdns_imx *data;
+	int ret;
+
+	if (!node)
+		return -ENODEV;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, data);
+	data->dev = dev;
+	data->noncore = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(data->noncore)) {
+		dev_err(dev, "can't map IOMEM resource\n");
+		return PTR_ERR(data->noncore);
+	}
+
+	data->num_clks = ARRAY_SIZE(imx_cdns3_core_clks);
+	data->clks = devm_kmemdup(dev, imx_cdns3_core_clks,
+				sizeof(imx_cdns3_core_clks), GFP_KERNEL);
+	if (!data->clks)
+		return -ENOMEM;
+
+	ret = devm_clk_bulk_get(dev, data->num_clks, data->clks);
+	if (ret)
+		return ret;
+
+	ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
+	if (ret)
+		return ret;
+
+	ret = cdns_imx_noncore_init(data);
+	if (ret)
+		goto err;
+
+	ret = of_platform_populate(node, NULL, cdns_imx_auxdata, dev);
+	if (ret) {
+		dev_err(dev, "failed to create children: %d\n", ret);
+		goto err;
+	}
+
+	device_set_wakeup_capable(dev, true);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return ret;
+err:
+	clk_bulk_disable_unprepare(data->num_clks, data->clks);
+	return ret;
+}
+
+static void cdns_imx_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct cdns_imx *data = dev_get_drvdata(dev);
+
+	pm_runtime_get_sync(dev);
+	of_platform_depopulate(dev);
+	clk_bulk_disable_unprepare(data->num_clks, data->clks);
+	pm_runtime_disable(dev);
+	pm_runtime_put_noidle(dev);
+	platform_set_drvdata(pdev, NULL);
+}
+
+#ifdef CONFIG_PM
+static void cdns3_set_wakeup(struct cdns_imx *data, bool enable)
+{
+	u32 value;
+
+	value = cdns_imx_readl(data, USB3_INT_REG);
+	if (enable)
+		value |= OTG_WAKEUP_EN | DEVU3_WAEKUP_EN;
+	else
+		value &= ~(OTG_WAKEUP_EN | DEVU3_WAEKUP_EN);
+
+	cdns_imx_writel(data, USB3_INT_REG, value);
+}
+
+static int cdns_imx_platform_suspend(struct device *dev,
+		bool suspend, bool wakeup)
+{
+	struct cdns *cdns = dev_get_drvdata(dev);
+	struct device *parent = dev->parent;
+	struct cdns_imx *data = dev_get_drvdata(parent);
+	void __iomem *otg_regs = (void __iomem *)(cdns->otg_regs);
+	void __iomem *xhci_regs = cdns->xhci_regs;
+	u32 value;
+	int ret = 0;
+
+	if (cdns->role != USB_ROLE_HOST)
+		return 0;
+
+	if (suspend) {
+		/* SW request low power when all usb ports allow to it ??? */
+		value = readl(xhci_regs + XECP_PM_PMCSR);
+		value &= ~PS_MASK;
+		value |= PS_D1;
+		writel(value, xhci_regs + XECP_PM_PMCSR);
+
+		/* mdctrl_clk_sel */
+		value = cdns_imx_readl(data, USB3_CORE_CTRL1);
+		value |= MDCTRL_CLK_SEL;
+		cdns_imx_writel(data, USB3_CORE_CTRL1, value);
+
+		/* wait for mdctrl_clk_status */
+		value = cdns_imx_readl(data, USB3_CORE_STATUS);
+		ret = readl_poll_timeout(data->noncore + USB3_CORE_STATUS, value,
+			(value & MDCTRL_CLK_STATUS) == MDCTRL_CLK_STATUS,
+			10, 100000);
+		if (ret)
+			dev_warn(parent, "wait mdctrl_clk_status timeout\n");
+
+		/* wait lpm_clk_req to be 0 */
+		value = cdns_imx_readl(data, USB3_INT_REG);
+		ret = readl_poll_timeout(data->noncore + USB3_INT_REG, value,
+			(value & LPM_CLK_REQ) != LPM_CLK_REQ,
+			10, 100000);
+		if (ret)
+			dev_warn(parent, "wait lpm_clk_req timeout\n");
+
+		/* wait phy_refclk_req to be 0 */
+		value = cdns_imx_readl(data, USB3_SSPHY_STATUS);
+		ret = readl_poll_timeout(data->noncore + USB3_SSPHY_STATUS, value,
+			(value & PHY_REFCLK_REQ) != PHY_REFCLK_REQ,
+			10, 100000);
+		if (ret)
+			dev_warn(parent, "wait phy_refclk_req timeout\n");
+
+		cdns3_set_wakeup(data, wakeup);
+	} else {
+		cdns3_set_wakeup(data, false);
+
+		/* SW request D0 */
+		value = readl(xhci_regs + XECP_PM_PMCSR);
+		value &= ~PS_MASK;
+		value |= PS_D0;
+		writel(value, xhci_regs + XECP_PM_PMCSR);
+
+		/* clr CFG_RXDET_P3_EN */
+		value = readl(xhci_regs + XECP_AUX_CTRL_REG1);
+		value &= ~CFG_RXDET_P3_EN;
+		writel(value, xhci_regs + XECP_AUX_CTRL_REG1);
+
+		/* clear mdctrl_clk_sel */
+		value = cdns_imx_readl(data, USB3_CORE_CTRL1);
+		value &= ~MDCTRL_CLK_SEL;
+		cdns_imx_writel(data, USB3_CORE_CTRL1, value);
+
+		/* wait CLK_125_REQ to be 1 */
+		value = cdns_imx_readl(data, USB3_INT_REG);
+		ret = readl_poll_timeout(data->noncore + USB3_INT_REG, value,
+			(value & CLK_125_REQ) == CLK_125_REQ,
+			10, 100000);
+		if (ret)
+			dev_warn(parent, "wait CLK_125_REQ timeout\n");
+
+		/* wait for mdctrl_clk_status is cleared */
+		value = cdns_imx_readl(data, USB3_CORE_STATUS);
+		ret = readl_poll_timeout(data->noncore + USB3_CORE_STATUS, value,
+			(value & MDCTRL_CLK_STATUS) != MDCTRL_CLK_STATUS,
+			10, 100000);
+		if (ret)
+			dev_warn(parent, "wait mdctrl_clk_status cleared timeout\n");
+
+		/* Wait until OTG_NRDY is 0 */
+		value = readl(otg_regs + OTGSTS);
+		ret = readl_poll_timeout(otg_regs + OTGSTS, value,
+			(value & OTG_NRDY) != OTG_NRDY,
+			10, 100000);
+		if (ret)
+			dev_warn(parent, "wait OTG ready timeout\n");
+	}
+
+	return ret;
+
+}
+
+static int cdns_imx_resume(struct device *dev)
+{
+	struct cdns_imx *data = dev_get_drvdata(dev);
+
+	return clk_bulk_prepare_enable(data->num_clks, data->clks);
+}
+
+static int cdns_imx_suspend(struct device *dev)
+{
+	struct cdns_imx *data = dev_get_drvdata(dev);
+
+	clk_bulk_disable_unprepare(data->num_clks, data->clks);
+
+	return 0;
+}
+
+
+/* Indicate if the controller was power lost before */
+static inline bool cdns_imx_is_power_lost(struct cdns_imx *data)
+{
+	u32 value;
+
+	value = cdns_imx_readl(data, USB3_CORE_CTRL1);
+	if ((value & SW_RESET_MASK) == ALL_SW_RESET)
+		return true;
+	else
+		return false;
+}
+
+static int __maybe_unused cdns_imx_system_suspend(struct device *dev)
+{
+	pm_runtime_put_sync(dev);
+	return 0;
+}
+
+static int __maybe_unused cdns_imx_system_resume(struct device *dev)
+{
+	struct cdns_imx *data = dev_get_drvdata(dev);
+	int ret;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0) {
+		dev_err(dev, "Could not get runtime PM.\n");
+		return ret;
+	}
+
+	if (cdns_imx_is_power_lost(data)) {
+		dev_dbg(dev, "resume from power lost\n");
+		ret = cdns_imx_noncore_init(data);
+		if (ret)
+			cdns_imx_suspend(dev);
+	}
+
+	return ret;
+}
+
+#else
+static int cdns_imx_platform_suspend(struct device *dev,
+	bool suspend, bool wakeup)
+{
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
+static const struct dev_pm_ops cdns_imx_pm_ops = {
+	SET_RUNTIME_PM_OPS(cdns_imx_suspend, cdns_imx_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(cdns_imx_system_suspend, cdns_imx_system_resume)
+};
+
+static const struct of_device_id cdns_imx_of_match[] = {
+	{ .compatible = "fsl,imx8qm-usb3", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, cdns_imx_of_match);
+
+static struct platform_driver cdns_imx_driver = {
+	.probe		= cdns_imx_probe,
+	.remove		= cdns_imx_remove,
+	.driver		= {
+		.name	= "cdns3-imx",
+		.of_match_table	= cdns_imx_of_match,
+		.pm	= &cdns_imx_pm_ops,
+	},
+};
+module_platform_driver(cdns_imx_driver);
+
+MODULE_ALIAS("platform:cdns3-imx");
+MODULE_AUTHOR("Peter Chen <peter.chen@nxp.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Cadence USB3 i.MX Glue Layer");
diff --git a/drivers/usb/cdns3/cdns3-pci-wrap.c b/drivers/usb/cdns3/cdns3-pci-wrap.c
new file mode 100644
index 000000000..eb5760f75
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-pci-wrap.c
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence USBSS PCI Glue driver
+ *
+ * Copyright (C) 2018-2019 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+
+struct cdns3_wrap {
+	struct platform_device *plat_dev;
+	struct resource dev_res[6];
+	int devfn;
+};
+
+#define RES_IRQ_HOST_ID		0
+#define RES_IRQ_PERIPHERAL_ID	1
+#define RES_IRQ_OTG_ID		2
+#define RES_HOST_ID		3
+#define RES_DEV_ID		4
+#define RES_DRD_ID		5
+
+#define PCI_BAR_HOST		0
+#define PCI_BAR_DEV		2
+#define PCI_BAR_OTG		0
+
+#define PCI_DEV_FN_HOST_DEVICE	0
+#define PCI_DEV_FN_OTG		1
+
+#define PCI_DRIVER_NAME		"cdns3-pci-usbss"
+#define PLAT_DRIVER_NAME	"cdns-usb3"
+
+static struct pci_dev *cdns3_get_second_fun(struct pci_dev *pdev)
+{
+	struct pci_dev *func;
+
+	/*
+	 * Gets the second function.
+	 * It's little tricky, but this platform has two function.
+	 * The fist keeps resources for Host/Device while the second
+	 * keeps resources for DRD/OTG.
+	 */
+	func = pci_get_device(pdev->vendor, pdev->device, NULL);
+	if (unlikely(!func))
+		return NULL;
+
+	if (func->devfn == pdev->devfn) {
+		func = pci_get_device(pdev->vendor, pdev->device, func);
+		if (unlikely(!func))
+			return NULL;
+	}
+
+	if (func->devfn != PCI_DEV_FN_HOST_DEVICE &&
+	    func->devfn != PCI_DEV_FN_OTG) {
+		return NULL;
+	}
+
+	return func;
+}
+
+static int cdns3_pci_probe(struct pci_dev *pdev,
+			   const struct pci_device_id *id)
+{
+	struct platform_device_info plat_info;
+	struct cdns3_wrap *wrap;
+	struct resource *res;
+	struct pci_dev *func;
+	int err;
+
+	/*
+	 * for GADGET/HOST PCI (devfn) function number is 0,
+	 * for OTG PCI (devfn) function number is 1
+	 */
+	if (!id || (pdev->devfn != PCI_DEV_FN_HOST_DEVICE &&
+		    pdev->devfn != PCI_DEV_FN_OTG))
+		return -EINVAL;
+
+	func = cdns3_get_second_fun(pdev);
+	if (unlikely(!func))
+		return -EINVAL;
+
+	err = pcim_enable_device(pdev);
+	if (err) {
+		dev_err(&pdev->dev, "Enabling PCI device has failed %d\n", err);
+		return err;
+	}
+
+	pci_set_master(pdev);
+
+	if (pci_is_enabled(func)) {
+		wrap = pci_get_drvdata(func);
+	} else {
+		wrap = kzalloc_obj(*wrap);
+		if (!wrap)
+			return -ENOMEM;
+	}
+
+	res = wrap->dev_res;
+
+	if (pdev->devfn == PCI_DEV_FN_HOST_DEVICE) {
+		/* function 0: host(BAR_0) + device(BAR_1).*/
+		dev_dbg(&pdev->dev, "Initialize Device resources\n");
+		res[RES_DEV_ID].start = pci_resource_start(pdev, PCI_BAR_DEV);
+		res[RES_DEV_ID].end =   pci_resource_end(pdev, PCI_BAR_DEV);
+		res[RES_DEV_ID].name = "dev";
+		res[RES_DEV_ID].flags = IORESOURCE_MEM;
+		dev_dbg(&pdev->dev, "USBSS-DEV physical base addr: %pa\n",
+			&res[RES_DEV_ID].start);
+
+		res[RES_HOST_ID].start = pci_resource_start(pdev, PCI_BAR_HOST);
+		res[RES_HOST_ID].end = pci_resource_end(pdev, PCI_BAR_HOST);
+		res[RES_HOST_ID].name = "xhci";
+		res[RES_HOST_ID].flags = IORESOURCE_MEM;
+		dev_dbg(&pdev->dev, "USBSS-XHCI physical base addr: %pa\n",
+			&res[RES_HOST_ID].start);
+
+		/* Interrupt for XHCI */
+		wrap->dev_res[RES_IRQ_HOST_ID].start = pdev->irq;
+		wrap->dev_res[RES_IRQ_HOST_ID].name = "host";
+		wrap->dev_res[RES_IRQ_HOST_ID].flags = IORESOURCE_IRQ;
+
+		/* Interrupt device. It's the same as for HOST. */
+		wrap->dev_res[RES_IRQ_PERIPHERAL_ID].start = pdev->irq;
+		wrap->dev_res[RES_IRQ_PERIPHERAL_ID].name = "peripheral";
+		wrap->dev_res[RES_IRQ_PERIPHERAL_ID].flags = IORESOURCE_IRQ;
+	} else {
+		res[RES_DRD_ID].start = pci_resource_start(pdev, PCI_BAR_OTG);
+		res[RES_DRD_ID].end =   pci_resource_end(pdev, PCI_BAR_OTG);
+		res[RES_DRD_ID].name = "otg";
+		res[RES_DRD_ID].flags = IORESOURCE_MEM;
+		dev_dbg(&pdev->dev, "USBSS-DRD physical base addr: %pa\n",
+			&res[RES_DRD_ID].start);
+
+		/* Interrupt for OTG/DRD. */
+		wrap->dev_res[RES_IRQ_OTG_ID].start = pdev->irq;
+		wrap->dev_res[RES_IRQ_OTG_ID].name = "otg";
+		wrap->dev_res[RES_IRQ_OTG_ID].flags = IORESOURCE_IRQ;
+	}
+
+	if (pci_is_enabled(func)) {
+		/* set up platform device info */
+		memset(&plat_info, 0, sizeof(plat_info));
+		plat_info.parent = &pdev->dev;
+		plat_info.fwnode = pdev->dev.fwnode;
+		plat_info.name = PLAT_DRIVER_NAME;
+		plat_info.id = pdev->devfn;
+		wrap->devfn  = pdev->devfn;
+		plat_info.res = wrap->dev_res;
+		plat_info.num_res = ARRAY_SIZE(wrap->dev_res);
+		plat_info.dma_mask = pdev->dma_mask;
+		/* register platform device */
+		wrap->plat_dev = platform_device_register_full(&plat_info);
+		if (IS_ERR(wrap->plat_dev)) {
+			err = PTR_ERR(wrap->plat_dev);
+			kfree(wrap);
+			return err;
+		}
+	}
+
+	pci_set_drvdata(pdev, wrap);
+	return err;
+}
+
+static void cdns3_pci_remove(struct pci_dev *pdev)
+{
+	struct cdns3_wrap *wrap;
+	struct pci_dev *func;
+
+	func = cdns3_get_second_fun(pdev);
+
+	wrap = (struct cdns3_wrap *)pci_get_drvdata(pdev);
+	if (wrap->devfn == pdev->devfn)
+		platform_device_unregister(wrap->plat_dev);
+
+	if (!pci_is_enabled(func))
+		kfree(wrap);
+}
+
+static const struct pci_device_id cdns3_pci_ids[] = {
+	{ PCI_VDEVICE(CDNS, PCI_DEVICE_ID_CDNS_USBSS) },
+	{ 0, }
+};
+
+static struct pci_driver cdns3_pci_driver = {
+	.name = PCI_DRIVER_NAME,
+	.id_table = cdns3_pci_ids,
+	.probe = cdns3_pci_probe,
+	.remove = cdns3_pci_remove,
+};
+
+module_pci_driver(cdns3_pci_driver);
+MODULE_DEVICE_TABLE(pci, cdns3_pci_ids);
+
+MODULE_AUTHOR("Pawel Laszczak <pawell@cadence.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Cadence USBSS PCI wrapper");
diff --git a/drivers/usb/cdns3/cdns3-plat.c b/drivers/usb/cdns3/cdns3-plat.c
new file mode 100644
index 000000000..bb5405460
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-plat.c
@@ -0,0 +1,372 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence USBSS DRD Driver.
+ *
+ * Copyright (C) 2018-2020 Cadence.
+ * Copyright (C) 2017-2018 NXP
+ * Copyright (C) 2019 Texas Instruments
+ *
+ *
+ * Author: Peter Chen <peter.chen@nxp.com>
+ *         Pawel Laszczak <pawell@cadence.com>
+ *         Roger Quadros <rogerq@ti.com>
+ */
+
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#include "core.h"
+#include "gadget-export.h"
+#include "host-export.h"
+#include "drd.h"
+
+static int set_phy_power_on(struct cdns *cdns)
+{
+	int ret;
+
+	ret = phy_power_on(cdns->usb2_phy);
+	if (ret)
+		return ret;
+
+	ret = phy_power_on(cdns->usb3_phy);
+	if (ret)
+		phy_power_off(cdns->usb2_phy);
+
+	return ret;
+}
+
+static void set_phy_power_off(struct cdns *cdns)
+{
+	phy_power_off(cdns->usb3_phy);
+	phy_power_off(cdns->usb2_phy);
+}
+
+static int cdns3_plat_gadget_init(struct cdns *cdns)
+{
+	if (cdns->version < CDNSP_CONTROLLER_V2)
+		return cdns3_gadget_init(cdns);
+	else
+		return cdnsp_gadget_init(cdns);
+}
+
+static int cdns3_plat_host_init(struct cdns *cdns)
+{
+	return cdns_host_init(cdns);
+}
+
+/**
+ * cdns3_plat_probe - probe for cdns3 core device
+ * @pdev: Pointer to cdns3 core platform device
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+static int cdns3_plat_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource	*res;
+	struct cdns *cdns;
+	void __iomem *regs;
+	int ret;
+
+	cdns = devm_kzalloc(dev, sizeof(*cdns), GFP_KERNEL);
+	if (!cdns)
+		return -ENOMEM;
+
+	cdns->dev = dev;
+	cdns->pdata = dev_get_platdata(dev);
+	if (cdns->pdata && cdns->pdata->override_apb_timeout)
+		cdns->override_apb_timeout = cdns->pdata->override_apb_timeout;
+
+	if (device_is_compatible(dev, "cdns,cdnsp")) {
+		cdns->no_drd = true;
+		cdns->version = CDNSP_CONTROLLER_V2;
+		dev_dbg(dev, "No DRD support\n");
+	}
+
+	platform_set_drvdata(pdev, cdns);
+
+	ret = platform_get_irq_byname(pdev, "host");
+	if (ret < 0)
+		return ret;
+
+	cdns->xhci_res[0].start = ret;
+	cdns->xhci_res[0].end = ret;
+	cdns->xhci_res[0].flags = IORESOURCE_IRQ | irq_get_trigger_type(ret);
+	cdns->xhci_res[0].name = "host";
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "xhci");
+	if (!res) {
+		dev_err(dev, "couldn't get xhci resource\n");
+		return -ENXIO;
+	}
+
+	cdns->xhci_res[1] = *res;
+
+	cdns->dev_irq = platform_get_irq_byname(pdev, "peripheral");
+
+	if (cdns->dev_irq < 0)
+		return dev_err_probe(dev, cdns->dev_irq,
+				     "Failed to get peripheral IRQ\n");
+
+	regs = devm_platform_ioremap_resource_byname(pdev, "dev");
+	if (IS_ERR(regs))
+		return dev_err_probe(dev, PTR_ERR(regs),
+				     "Failed to get dev base\n");
+
+	cdns->dev_regs	= regs;
+
+	if (!cdns->no_drd) {
+		cdns->otg_irq = platform_get_irq_byname(pdev, "otg");
+		if (cdns->otg_irq < 0)
+			return dev_err_probe(dev, cdns->otg_irq,
+					     "Failed to get otg IRQ\n");
+
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "otg");
+		if (!res) {
+			dev_err(dev, "couldn't get otg resource\n");
+			return -ENXIO;
+		}
+		cdns->otg_res = *res;
+	}
+
+	cdns->phyrst_a_enable = device_property_read_bool(dev, "cdns,phyrst-a-enable");
+
+	cdns->wakeup_irq = platform_get_irq_byname_optional(pdev, "wakeup");
+	if (cdns->wakeup_irq == -EPROBE_DEFER)
+		return cdns->wakeup_irq;
+
+	if (cdns->wakeup_irq < 0) {
+		dev_dbg(dev, "couldn't get wakeup irq\n");
+		cdns->wakeup_irq = 0x0;
+	}
+
+	cdns->usb2_phy = devm_phy_optional_get(dev, "cdns3,usb2-phy");
+	if (IS_ERR(cdns->usb2_phy))
+		return dev_err_probe(dev, PTR_ERR(cdns->usb2_phy),
+				     "Failed to get cdn3,usb2-phy\n");
+
+	cdns->usb3_phy = devm_phy_optional_get(dev, "cdns3,usb3-phy");
+	if (IS_ERR(cdns->usb3_phy))
+		return dev_err_probe(dev, PTR_ERR(cdns->usb3_phy),
+				     "Failed to get cdn3,usb3-phy\n");
+
+	ret = phy_init(cdns->usb2_phy);
+	if (ret)
+		return ret;
+
+	ret = phy_init(cdns->usb3_phy);
+	if (ret)
+		goto err_phy3_init;
+
+	ret = set_phy_power_on(cdns);
+	if (ret)
+		goto err_phy_power_on;
+
+	ret = cdns_init(cdns);
+	if (ret)
+		goto err_cdns_init;
+
+	cdns->gadget_init = cdns3_plat_gadget_init;
+	cdns->host_init = cdns3_plat_host_init;
+	ret = cdns_core_init_role(cdns);
+	if (ret)
+		goto err_cdns_init_role;
+
+	device_set_wakeup_capable(dev, true);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	if (!(cdns->pdata && (cdns->pdata->quirks & CDNS3_DEFAULT_PM_RUNTIME_ALLOW)))
+		pm_runtime_forbid(dev);
+
+	/*
+	 * The controller needs less time between bus and controller suspend,
+	 * and we also needs a small delay to avoid frequently entering low
+	 * power mode.
+	 */
+	pm_runtime_set_autosuspend_delay(dev, 20);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_use_autosuspend(dev);
+
+	return 0;
+
+err_cdns_init_role:
+	if (cdns->role_sw)
+		usb_role_switch_unregister(cdns->role_sw);
+err_cdns_init:
+	set_phy_power_off(cdns);
+err_phy_power_on:
+	phy_exit(cdns->usb3_phy);
+err_phy3_init:
+	phy_exit(cdns->usb2_phy);
+
+	return ret;
+}
+
+/**
+ * cdns3_plat_remove() - unbind drd driver and clean up
+ * @pdev: Pointer to Linux platform device
+ */
+static void cdns3_plat_remove(struct platform_device *pdev)
+{
+	struct cdns *cdns = platform_get_drvdata(pdev);
+	struct device *dev = cdns->dev;
+
+	pm_runtime_get_sync(dev);
+	if (!(cdns->pdata && (cdns->pdata->quirks & CDNS3_DEFAULT_PM_RUNTIME_ALLOW)))
+		pm_runtime_allow(dev);
+
+	pm_runtime_disable(dev);
+	pm_runtime_put_noidle(dev);
+	cdns_remove(cdns);
+	set_phy_power_off(cdns);
+	phy_exit(cdns->usb2_phy);
+	phy_exit(cdns->usb3_phy);
+}
+
+#ifdef CONFIG_PM
+
+static int cdns3_set_platform_suspend(struct device *dev,
+				      bool suspend, bool wakeup)
+{
+	struct cdns *cdns = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (cdns->pdata && cdns->pdata->platform_suspend)
+		ret = cdns->pdata->platform_suspend(dev, suspend, wakeup);
+
+	return ret;
+}
+
+static int cdns3_controller_suspend(struct device *dev, pm_message_t msg)
+{
+	struct cdns *cdns = dev_get_drvdata(dev);
+	bool wakeup;
+	unsigned long flags;
+
+	if (cdns->in_lpm)
+		return 0;
+
+	if (PMSG_IS_AUTO(msg))
+		wakeup = true;
+	else
+		wakeup = device_may_wakeup(dev);
+
+	cdns3_set_platform_suspend(cdns->dev, true, wakeup);
+	set_phy_power_off(cdns);
+	spin_lock_irqsave(&cdns->lock, flags);
+	cdns->in_lpm = true;
+	spin_unlock_irqrestore(&cdns->lock, flags);
+	dev_dbg(cdns->dev, "%s ends\n", __func__);
+
+	return 0;
+}
+
+static int cdns3_controller_resume(struct device *dev, pm_message_t msg)
+{
+	struct cdns *cdns = dev_get_drvdata(dev);
+	int ret;
+	unsigned long flags;
+
+	if (!cdns->in_lpm)
+		return 0;
+
+	if (cdns_power_is_lost(cdns)) {
+		phy_exit(cdns->usb2_phy);
+		ret = phy_init(cdns->usb2_phy);
+		if (ret)
+			return ret;
+
+		phy_exit(cdns->usb3_phy);
+		ret = phy_init(cdns->usb3_phy);
+		if (ret)
+			return ret;
+	}
+
+	ret = set_phy_power_on(cdns);
+	if (ret)
+		return ret;
+
+	cdns3_set_platform_suspend(cdns->dev, false, false);
+
+	spin_lock_irqsave(&cdns->lock, flags);
+	cdns_resume(cdns);
+	cdns->in_lpm = false;
+	spin_unlock_irqrestore(&cdns->lock, flags);
+	cdns_set_active(cdns, !PMSG_IS_AUTO(msg));
+	if (cdns->wakeup_pending) {
+		cdns->wakeup_pending = false;
+		enable_irq(cdns->wakeup_irq);
+	}
+	dev_dbg(cdns->dev, "%s ends\n", __func__);
+
+	return ret;
+}
+
+static int cdns3_plat_runtime_suspend(struct device *dev)
+{
+	return cdns3_controller_suspend(dev, PMSG_AUTO_SUSPEND);
+}
+
+static int cdns3_plat_runtime_resume(struct device *dev)
+{
+	return cdns3_controller_resume(dev, PMSG_AUTO_RESUME);
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int cdns3_plat_suspend(struct device *dev)
+{
+	struct cdns *cdns = dev_get_drvdata(dev);
+	int ret;
+
+	cdns_suspend(cdns);
+
+	ret = cdns3_controller_suspend(dev, PMSG_SUSPEND);
+	if (ret)
+		return ret;
+
+	if (device_may_wakeup(dev) && cdns->wakeup_irq)
+		enable_irq_wake(cdns->wakeup_irq);
+
+	return ret;
+}
+
+static int cdns3_plat_resume(struct device *dev)
+{
+	return cdns3_controller_resume(dev, PMSG_RESUME);
+}
+#endif /* CONFIG_PM_SLEEP */
+#endif /* CONFIG_PM */
+
+static const struct dev_pm_ops cdns3_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(cdns3_plat_suspend, cdns3_plat_resume)
+	SET_RUNTIME_PM_OPS(cdns3_plat_runtime_suspend,
+			   cdns3_plat_runtime_resume, NULL)
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id of_cdns3_match[] = {
+	{ .compatible = "cdns,usb3" },
+	{ .compatible = "cdns,cdnsp" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, of_cdns3_match);
+#endif
+
+static struct platform_driver cdns3_driver = {
+	.probe		= cdns3_plat_probe,
+	.remove		= cdns3_plat_remove,
+	.driver		= {
+		.name	= "cdns-usb3",
+		.of_match_table	= of_match_ptr(of_cdns3_match),
+		.pm	= &cdns3_pm_ops,
+	},
+};
+
+module_platform_driver(cdns3_driver);
+
+MODULE_ALIAS("platform:cdns3");
diff --git a/drivers/usb/cdns3/cdns3-starfive.c b/drivers/usb/cdns3/cdns3-starfive.c
new file mode 100644
index 000000000..2ff7f2b48
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-starfive.c
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * cdns3-starfive.c - StarFive specific Glue layer for Cadence USB Controller
+ *
+ * Copyright (C) 2023 StarFive Technology Co., Ltd.
+ *
+ * Author:	Minda Chen <minda.chen@starfivetech.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/reset.h>
+#include <linux/regmap.h>
+#include <linux/usb/otg.h>
+#include "core.h"
+
+#define USB_STRAP_HOST			BIT(17)
+#define USB_STRAP_DEVICE		BIT(18)
+#define USB_STRAP_MASK			GENMASK(18, 16)
+
+#define USB_SUSPENDM_HOST		BIT(19)
+#define USB_SUSPENDM_MASK		BIT(19)
+
+#define USB_MISC_CFG_MASK		GENMASK(23, 20)
+#define USB_SUSPENDM_BYPS		BIT(20)
+#define USB_PLL_EN			BIT(22)
+#define USB_REFCLK_MODE			BIT(23)
+
+struct cdns_starfive {
+	struct device *dev;
+	struct regmap *stg_syscon;
+	struct reset_control *resets;
+	struct clk_bulk_data *clks;
+	int num_clks;
+	u32 stg_usb_mode;
+};
+
+static void cdns_mode_init(struct platform_device *pdev,
+			   struct cdns_starfive *data)
+{
+	enum usb_dr_mode mode;
+
+	regmap_update_bits(data->stg_syscon, data->stg_usb_mode,
+			   USB_MISC_CFG_MASK,
+			   USB_SUSPENDM_BYPS | USB_PLL_EN | USB_REFCLK_MODE);
+
+	/* dr mode setting */
+	mode = usb_get_dr_mode(&pdev->dev);
+
+	switch (mode) {
+	case USB_DR_MODE_HOST:
+		regmap_update_bits(data->stg_syscon,
+				   data->stg_usb_mode,
+				   USB_STRAP_MASK,
+				   USB_STRAP_HOST);
+		regmap_update_bits(data->stg_syscon,
+				   data->stg_usb_mode,
+				   USB_SUSPENDM_MASK,
+				   USB_SUSPENDM_HOST);
+		break;
+
+	case USB_DR_MODE_PERIPHERAL:
+		regmap_update_bits(data->stg_syscon, data->stg_usb_mode,
+				   USB_STRAP_MASK, USB_STRAP_DEVICE);
+		regmap_update_bits(data->stg_syscon, data->stg_usb_mode,
+				   USB_SUSPENDM_MASK, 0);
+		break;
+	default:
+		break;
+	}
+}
+
+static int cdns_clk_rst_init(struct cdns_starfive *data)
+{
+	int ret;
+
+	ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
+	if (ret)
+		return dev_err_probe(data->dev, ret,
+				     "failed to enable clocks\n");
+
+	ret = reset_control_deassert(data->resets);
+	if (ret) {
+		dev_err(data->dev, "failed to reset clocks\n");
+		goto err_clk_init;
+	}
+
+	return ret;
+
+err_clk_init:
+	clk_bulk_disable_unprepare(data->num_clks, data->clks);
+	return ret;
+}
+
+static void cdns_clk_rst_deinit(struct cdns_starfive *data)
+{
+	reset_control_assert(data->resets);
+	clk_bulk_disable_unprepare(data->num_clks, data->clks);
+}
+
+static int cdns_starfive_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct cdns_starfive *data;
+	unsigned int args;
+	int ret;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->dev = dev;
+
+	data->stg_syscon =
+		syscon_regmap_lookup_by_phandle_args(pdev->dev.of_node,
+						     "starfive,stg-syscon", 1, &args);
+
+	if (IS_ERR(data->stg_syscon))
+		return dev_err_probe(dev, PTR_ERR(data->stg_syscon),
+				     "Failed to parse starfive,stg-syscon\n");
+
+	data->stg_usb_mode = args;
+
+	data->num_clks = devm_clk_bulk_get_all(data->dev, &data->clks);
+	if (data->num_clks < 0)
+		return dev_err_probe(data->dev, -ENODEV,
+				     "Failed to get clocks\n");
+
+	data->resets = devm_reset_control_array_get_exclusive(data->dev);
+	if (IS_ERR(data->resets))
+		return dev_err_probe(data->dev, PTR_ERR(data->resets),
+				     "Failed to get resets");
+
+	cdns_mode_init(pdev, data);
+	ret = cdns_clk_rst_init(data);
+	if (ret)
+		return ret;
+
+	ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
+	if (ret) {
+		dev_err(dev, "Failed to create children\n");
+		cdns_clk_rst_deinit(data);
+		return ret;
+	}
+
+	device_set_wakeup_capable(dev, true);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	platform_set_drvdata(pdev, data);
+
+	return 0;
+}
+
+static int cdns_starfive_remove_core(struct device *dev, void *c)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	platform_device_unregister(pdev);
+
+	return 0;
+}
+
+static void cdns_starfive_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct cdns_starfive *data = dev_get_drvdata(dev);
+
+	pm_runtime_get_sync(dev);
+	device_for_each_child(dev, NULL, cdns_starfive_remove_core);
+
+	pm_runtime_disable(dev);
+	pm_runtime_put_noidle(dev);
+	cdns_clk_rst_deinit(data);
+	platform_set_drvdata(pdev, NULL);
+}
+
+#ifdef CONFIG_PM
+static int cdns_starfive_runtime_resume(struct device *dev)
+{
+	struct cdns_starfive *data = dev_get_drvdata(dev);
+
+	return clk_bulk_prepare_enable(data->num_clks, data->clks);
+}
+
+static int cdns_starfive_runtime_suspend(struct device *dev)
+{
+	struct cdns_starfive *data = dev_get_drvdata(dev);
+
+	clk_bulk_disable_unprepare(data->num_clks, data->clks);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int cdns_starfive_resume(struct device *dev)
+{
+	struct cdns_starfive *data = dev_get_drvdata(dev);
+
+	return cdns_clk_rst_init(data);
+}
+
+static int cdns_starfive_suspend(struct device *dev)
+{
+	struct cdns_starfive *data = dev_get_drvdata(dev);
+
+	cdns_clk_rst_deinit(data);
+
+	return 0;
+}
+#endif
+#endif
+
+static const struct dev_pm_ops cdns_starfive_pm_ops = {
+	SET_RUNTIME_PM_OPS(cdns_starfive_runtime_suspend,
+			   cdns_starfive_runtime_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(cdns_starfive_suspend, cdns_starfive_resume)
+};
+
+static const struct of_device_id cdns_starfive_of_match[] = {
+	{ .compatible = "starfive,jh7110-usb", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, cdns_starfive_of_match);
+
+static struct platform_driver cdns_starfive_driver = {
+	.probe		= cdns_starfive_probe,
+	.remove		= cdns_starfive_remove,
+	.driver		= {
+		.name	= "cdns3-starfive",
+		.of_match_table	= cdns_starfive_of_match,
+		.pm	= &cdns_starfive_pm_ops,
+	},
+};
+module_platform_driver(cdns_starfive_driver);
+
+MODULE_ALIAS("platform:cdns3-starfive");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Cadence USB3 StarFive Glue Layer");
diff --git a/drivers/usb/cdns3/cdns3-ti.c b/drivers/usb/cdns3/cdns3-ti.c
new file mode 100644
index 000000000..302ebf6d8
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-ti.c
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * cdns3-ti.c - TI specific Glue layer for Cadence USB Controller
+ *
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+#include "core.h"
+
+/* USB Wrapper register offsets */
+#define USBSS_PID		0x0
+#define	USBSS_W1		0x4
+#define USBSS_STATIC_CONFIG	0x8
+#define USBSS_PHY_TEST		0xc
+#define	USBSS_DEBUG_CTRL	0x10
+#define	USBSS_DEBUG_INFO	0x14
+#define	USBSS_DEBUG_LINK_STATE	0x18
+#define	USBSS_DEVICE_CTRL	0x1c
+
+/* Wrapper 1 register bits */
+#define USBSS_W1_PWRUP_RST		BIT(0)
+#define USBSS_W1_OVERCURRENT_SEL	BIT(8)
+#define USBSS_W1_MODESTRAP_SEL		BIT(9)
+#define USBSS_W1_OVERCURRENT		BIT(16)
+#define USBSS_W1_MODESTRAP_MASK		GENMASK(18, 17)
+#define USBSS_W1_MODESTRAP_SHIFT	17
+#define USBSS_W1_USB2_ONLY		BIT(19)
+
+/* Static config register bits */
+#define USBSS1_STATIC_PLL_REF_SEL_MASK	GENMASK(8, 5)
+#define USBSS1_STATIC_PLL_REF_SEL_SHIFT	5
+#define USBSS1_STATIC_LOOPBACK_MODE_MASK	GENMASK(4, 3)
+#define USBSS1_STATIC_LOOPBACK_MODE_SHIFT	3
+#define USBSS1_STATIC_VBUS_SEL_MASK	GENMASK(2, 1)
+#define USBSS1_STATIC_VBUS_SEL_SHIFT	1
+#define USBSS1_STATIC_LANE_REVERSE	BIT(0)
+
+/* Modestrap modes */
+enum modestrap_mode { USBSS_MODESTRAP_MODE_NONE,
+		      USBSS_MODESTRAP_MODE_HOST,
+		      USBSS_MODESTRAP_MODE_PERIPHERAL};
+
+struct cdns_ti {
+	struct device *dev;
+	void __iomem *usbss;
+	unsigned usb2_only:1;
+	unsigned vbus_divider:1;
+	struct clk *usb2_refclk;
+	struct clk *lpm_clk;
+	int usb2_refclk_rate_code;
+};
+
+static const int cdns_ti_rate_table[] = {	/* in KHZ */
+	9600,
+	10000,
+	12000,
+	19200,
+	20000,
+	24000,
+	25000,
+	26000,
+	38400,
+	40000,
+	58000,
+	50000,
+	52000,
+};
+
+static inline u32 cdns_ti_readl(struct cdns_ti *data, u32 offset)
+{
+	return readl(data->usbss + offset);
+}
+
+static inline void cdns_ti_writel(struct cdns_ti *data, u32 offset, u32 value)
+{
+	writel(value, data->usbss + offset);
+}
+
+static struct cdns3_platform_data cdns_ti_pdata = {
+	.quirks = CDNS3_DRD_SUSPEND_RESIDENCY_ENABLE,   /* Errata i2409 */
+};
+
+static const struct of_dev_auxdata cdns_ti_auxdata[] = {
+	{
+		.compatible = "cdns,usb3",
+		.platform_data = &cdns_ti_pdata,
+	},
+	{},
+};
+
+static void cdns_ti_reset_and_init_hw(struct cdns_ti *data)
+{
+	u32 reg;
+
+	/* assert RESET */
+	reg = cdns_ti_readl(data, USBSS_W1);
+	reg &= ~USBSS_W1_PWRUP_RST;
+	cdns_ti_writel(data, USBSS_W1, reg);
+
+	/* set static config */
+	reg = cdns_ti_readl(data, USBSS_STATIC_CONFIG);
+	reg &= ~USBSS1_STATIC_PLL_REF_SEL_MASK;
+	reg |= data->usb2_refclk_rate_code << USBSS1_STATIC_PLL_REF_SEL_SHIFT;
+
+	reg &= ~USBSS1_STATIC_VBUS_SEL_MASK;
+	if (data->vbus_divider)
+		reg |= 1 << USBSS1_STATIC_VBUS_SEL_SHIFT;
+
+	cdns_ti_writel(data, USBSS_STATIC_CONFIG, reg);
+	reg = cdns_ti_readl(data, USBSS_STATIC_CONFIG);
+
+	/* set USB2_ONLY mode if requested */
+	reg = cdns_ti_readl(data, USBSS_W1);
+	if (data->usb2_only)
+		reg |= USBSS_W1_USB2_ONLY;
+
+	/* set default modestrap */
+	reg |= USBSS_W1_MODESTRAP_SEL;
+	reg &= ~USBSS_W1_MODESTRAP_MASK;
+	reg |= USBSS_MODESTRAP_MODE_NONE << USBSS_W1_MODESTRAP_SHIFT;
+	cdns_ti_writel(data, USBSS_W1, reg);
+
+	/* de-assert RESET */
+	reg |= USBSS_W1_PWRUP_RST;
+	cdns_ti_writel(data, USBSS_W1, reg);
+}
+
+static int cdns_ti_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *node = pdev->dev.of_node;
+	struct cdns_ti *data;
+	unsigned long rate;
+	int error, i;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, data);
+
+	data->dev = dev;
+
+	data->usbss = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(data->usbss)) {
+		dev_err(dev, "can't map IOMEM resource\n");
+		return PTR_ERR(data->usbss);
+	}
+
+	data->usb2_refclk = devm_clk_get(dev, "ref");
+	if (IS_ERR(data->usb2_refclk)) {
+		dev_err(dev, "can't get usb2_refclk\n");
+		return PTR_ERR(data->usb2_refclk);
+	}
+
+	data->lpm_clk = devm_clk_get(dev, "lpm");
+	if (IS_ERR(data->lpm_clk)) {
+		dev_err(dev, "can't get lpm_clk\n");
+		return PTR_ERR(data->lpm_clk);
+	}
+
+	rate = clk_get_rate(data->usb2_refclk);
+	rate /= 1000;	/* To KHz */
+	for (i = 0; i < ARRAY_SIZE(cdns_ti_rate_table); i++) {
+		if (cdns_ti_rate_table[i] == rate)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(cdns_ti_rate_table)) {
+		dev_err(dev, "unsupported usb2_refclk rate: %lu KHz\n", rate);
+		return -EINVAL;
+	}
+
+	data->usb2_refclk_rate_code = i;
+	data->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider");
+	data->usb2_only = device_property_read_bool(dev, "ti,usb2-only");
+
+	/*
+	 * The call below to pm_runtime_get_sync() MIGHT reset hardware, if it
+	 * detects it as uninitialised. We want to enforce a reset at probe,
+	 * and so do it manually here. This means the first runtime_resume()
+	 * will be a no-op.
+	 */
+	cdns_ti_reset_and_init_hw(data);
+
+	pm_runtime_enable(dev);
+	error = pm_runtime_get_sync(dev);
+	if (error < 0) {
+		dev_err(dev, "pm_runtime_get_sync failed: %d\n", error);
+		goto err;
+	}
+
+	error = of_platform_populate(node, NULL, cdns_ti_auxdata, dev);
+	if (error) {
+		dev_err(dev, "failed to create children: %d\n", error);
+		goto err;
+	}
+
+	return 0;
+
+err:
+	pm_runtime_put_sync(data->dev);
+	pm_runtime_disable(data->dev);
+
+	return error;
+}
+
+static int cdns_ti_remove_core(struct device *dev, void *c)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	platform_device_unregister(pdev);
+
+	return 0;
+}
+
+static void cdns_ti_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+
+	device_for_each_child(dev, NULL, cdns_ti_remove_core);
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
+
+	platform_set_drvdata(pdev, NULL);
+}
+
+static int cdns_ti_runtime_resume(struct device *dev)
+{
+	const u32 mask = USBSS_W1_PWRUP_RST | USBSS_W1_MODESTRAP_SEL;
+	struct cdns_ti *data = dev_get_drvdata(dev);
+	u32 w1;
+
+	w1 = cdns_ti_readl(data, USBSS_W1);
+	if ((w1 & mask) != mask)
+		cdns_ti_reset_and_init_hw(data);
+
+	return 0;
+}
+
+static const struct dev_pm_ops cdns_ti_pm_ops = {
+	RUNTIME_PM_OPS(NULL, cdns_ti_runtime_resume, NULL)
+	SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume)
+};
+
+static const struct of_device_id cdns_ti_of_match[] = {
+	{ .compatible = "ti,j721e-usb", },
+	{ .compatible = "ti,am64-usb", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, cdns_ti_of_match);
+
+static struct platform_driver cdns_ti_driver = {
+	.probe		= cdns_ti_probe,
+	.remove		= cdns_ti_remove,
+	.driver		= {
+		.name	= "cdns3-ti",
+		.of_match_table	= cdns_ti_of_match,
+		.pm     = pm_ptr(&cdns_ti_pm_ops),
+	},
+};
+
+module_platform_driver(cdns_ti_driver);
+
+MODULE_ALIAS("platform:cdns3-ti");
+MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Cadence USB3 TI Glue Layer");
diff --git a/drivers/usb/cdns3/cdns3-trace.c b/drivers/usb/cdns3/cdns3-trace.c
new file mode 100644
index 000000000..b9858acae
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-trace.c
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USBSS device controller driver Trace Support
+ *
+ * Copyright (C) 2018-2019 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ */
+
+#define CREATE_TRACE_POINTS
+#include "cdns3-trace.h"
diff --git a/drivers/usb/cdns3/cdns3-trace.h b/drivers/usb/cdns3/cdns3-trace.h
new file mode 100644
index 000000000..21a6a2ce7
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-trace.h
@@ -0,0 +1,496 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * USBSS device controller driver.
+ * Trace support header file.
+ *
+ * Copyright (C) 2018-2019 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM cdns3
+
+#if !defined(__LINUX_CDNS3_TRACE) || defined(TRACE_HEADER_MULTI_READ)
+#define __LINUX_CDNS3_TRACE
+
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+#include <asm/byteorder.h>
+#include <linux/usb/ch9.h>
+#include "core.h"
+#include "cdns3-gadget.h"
+#include "cdns3-debug.h"
+
+#define CDNS3_MSG_MAX	500
+
+TRACE_EVENT(cdns3_halt,
+	TP_PROTO(struct cdns3_endpoint *ep_priv, u8 halt, u8 flush),
+	TP_ARGS(ep_priv, halt, flush),
+	TP_STRUCT__entry(
+		__string(name, ep_priv->name)
+		__field(u8, halt)
+		__field(u8, flush)
+	),
+	TP_fast_assign(
+		__assign_str(name);
+		__entry->halt = halt;
+		__entry->flush = flush;
+	),
+	TP_printk("Halt %s for %s: %s", __entry->flush ? " and flush" : "",
+		  __get_str(name), __entry->halt ? "set" : "cleared")
+);
+
+TRACE_EVENT(cdns3_wa1,
+	TP_PROTO(struct cdns3_endpoint *ep_priv, char *msg),
+	TP_ARGS(ep_priv, msg),
+	TP_STRUCT__entry(
+		__string(ep_name, ep_priv->name)
+		__string(msg, msg)
+	),
+	TP_fast_assign(
+		__assign_str(ep_name);
+		__assign_str(msg);
+	),
+	TP_printk("WA1: %s %s", __get_str(ep_name), __get_str(msg))
+);
+
+TRACE_EVENT(cdns3_wa2,
+	TP_PROTO(struct cdns3_endpoint *ep_priv, char *msg),
+	TP_ARGS(ep_priv, msg),
+	TP_STRUCT__entry(
+		__string(ep_name, ep_priv->name)
+		__string(msg, msg)
+	),
+	TP_fast_assign(
+		__assign_str(ep_name);
+		__assign_str(msg);
+	),
+	TP_printk("WA2: %s %s", __get_str(ep_name), __get_str(msg))
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_doorbell,
+	TP_PROTO(const char *ep_name, u32 ep_trbaddr),
+	TP_ARGS(ep_name, ep_trbaddr),
+	TP_STRUCT__entry(
+		__string(name, ep_name)
+		__field(u32, ep_trbaddr)
+	),
+	TP_fast_assign(
+		__assign_str(name);
+		__entry->ep_trbaddr = ep_trbaddr;
+	),
+	TP_printk("%s, ep_trbaddr %08x", __get_str(name),
+		  __entry->ep_trbaddr)
+);
+
+DEFINE_EVENT(cdns3_log_doorbell, cdns3_doorbell_ep0,
+	TP_PROTO(const char *ep_name, u32 ep_trbaddr),
+	TP_ARGS(ep_name, ep_trbaddr)
+);
+
+DEFINE_EVENT(cdns3_log_doorbell, cdns3_doorbell_epx,
+	TP_PROTO(const char *ep_name, u32 ep_trbaddr),
+	TP_ARGS(ep_name, ep_trbaddr)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_usb_irq,
+	TP_PROTO(struct cdns3_device *priv_dev, u32 usb_ists),
+	TP_ARGS(priv_dev, usb_ists),
+	TP_STRUCT__entry(
+		__field(enum usb_device_speed, speed)
+		__field(u32, usb_ists)
+	),
+	TP_fast_assign(
+		__entry->speed = cdns3_get_speed(priv_dev);
+		__entry->usb_ists = usb_ists;
+	),
+	TP_printk("%s", cdns3_decode_usb_irq(__get_buf(CDNS3_MSG_MAX), __entry->speed,
+					     __entry->usb_ists))
+);
+
+DEFINE_EVENT(cdns3_log_usb_irq, cdns3_usb_irq,
+	TP_PROTO(struct cdns3_device *priv_dev, u32 usb_ists),
+	TP_ARGS(priv_dev, usb_ists)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_epx_irq,
+	TP_PROTO(struct cdns3_device *priv_dev, struct cdns3_endpoint *priv_ep),
+	TP_ARGS(priv_dev, priv_ep),
+	TP_STRUCT__entry(
+		__string(ep_name, priv_ep->name)
+		__field(u32, ep_sts)
+		__field(u32, ep_traddr)
+		__field(u32, ep_last_sid)
+		__field(u32, use_streams)
+	),
+	TP_fast_assign(
+		__assign_str(ep_name);
+		__entry->ep_sts = readl(&priv_dev->regs->ep_sts);
+		__entry->ep_traddr = readl(&priv_dev->regs->ep_traddr);
+		__entry->ep_last_sid = priv_ep->last_stream_id;
+		__entry->use_streams = priv_ep->use_streams;
+	),
+	TP_printk("%s, ep_traddr: %08x ep_last_sid: %08x use_streams: %d",
+		  cdns3_decode_epx_irq(__get_buf(CDNS3_MSG_MAX),
+				       __get_str(ep_name),
+				       __entry->ep_sts),
+		  __entry->ep_traddr,
+		  __entry->ep_last_sid,
+		  __entry->use_streams)
+);
+
+DEFINE_EVENT(cdns3_log_epx_irq, cdns3_epx_irq,
+	TP_PROTO(struct cdns3_device *priv_dev, struct cdns3_endpoint *priv_ep),
+	TP_ARGS(priv_dev, priv_ep)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_ep0_irq,
+	TP_PROTO(struct cdns3_device *priv_dev,  u32 ep_sts),
+	TP_ARGS(priv_dev, ep_sts),
+	TP_STRUCT__entry(
+		__field(int, ep_dir)
+		__field(u32, ep_sts)
+	),
+	TP_fast_assign(
+		__entry->ep_dir = priv_dev->selected_ep;
+		__entry->ep_sts = ep_sts;
+	),
+	TP_printk("%s", cdns3_decode_ep0_irq(__get_buf(CDNS3_MSG_MAX),
+					     __entry->ep_dir,
+					     __entry->ep_sts))
+);
+
+DEFINE_EVENT(cdns3_log_ep0_irq, cdns3_ep0_irq,
+	TP_PROTO(struct cdns3_device *priv_dev, u32 ep_sts),
+	TP_ARGS(priv_dev, ep_sts)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_ctrl,
+	TP_PROTO(struct usb_ctrlrequest *ctrl),
+	TP_ARGS(ctrl),
+	TP_STRUCT__entry(
+		__field(u8, bRequestType)
+		__field(u8, bRequest)
+		__field(u16, wValue)
+		__field(u16, wIndex)
+		__field(u16, wLength)
+	),
+	TP_fast_assign(
+		__entry->bRequestType = ctrl->bRequestType;
+		__entry->bRequest = ctrl->bRequest;
+		__entry->wValue = le16_to_cpu(ctrl->wValue);
+		__entry->wIndex = le16_to_cpu(ctrl->wIndex);
+		__entry->wLength = le16_to_cpu(ctrl->wLength);
+	),
+	TP_printk("%s", usb_decode_ctrl(__get_buf(CDNS3_MSG_MAX), CDNS3_MSG_MAX,
+					__entry->bRequestType,
+					__entry->bRequest, __entry->wValue,
+					__entry->wIndex, __entry->wLength)
+	)
+);
+
+DEFINE_EVENT(cdns3_log_ctrl, cdns3_ctrl_req,
+	TP_PROTO(struct usb_ctrlrequest *ctrl),
+	TP_ARGS(ctrl)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_request,
+	TP_PROTO(struct cdns3_request *req),
+	TP_ARGS(req),
+	TP_STRUCT__entry(
+		__string(name, req->priv_ep->name)
+		__field(struct cdns3_request *, req)
+		__field(void *, buf)
+		__field(unsigned int, actual)
+		__field(unsigned int, length)
+		__field(int, status)
+		__field(int, zero)
+		__field(int, short_not_ok)
+		__field(int, no_interrupt)
+		__field(int, start_trb)
+		__field(int, end_trb)
+		__field(int, flags)
+		__field(unsigned int, stream_id)
+	),
+	TP_fast_assign(
+		__assign_str(name);
+		__entry->req = req;
+		__entry->buf = req->request.buf;
+		__entry->actual = req->request.actual;
+		__entry->length = req->request.length;
+		__entry->status = req->request.status;
+		__entry->zero = req->request.zero;
+		__entry->short_not_ok = req->request.short_not_ok;
+		__entry->no_interrupt = req->request.no_interrupt;
+		__entry->start_trb = req->start_trb;
+		__entry->end_trb = req->end_trb;
+		__entry->flags = req->flags;
+		__entry->stream_id = req->request.stream_id;
+	),
+	TP_printk("%s: req: %p, req buff %p, length: %u/%u %s%s%s, status: %d,"
+		  " trb: [start:%d, end:%d], flags:%x SID: %u",
+		__get_str(name), __entry->req, __entry->buf, __entry->actual,
+		__entry->length,
+		__entry->zero ? "Z" : "z",
+		__entry->short_not_ok ? "S" : "s",
+		__entry->no_interrupt ? "I" : "i",
+		__entry->status,
+		__entry->start_trb,
+		__entry->end_trb,
+		__entry->flags,
+		__entry->stream_id
+	)
+);
+
+DEFINE_EVENT(cdns3_log_request, cdns3_alloc_request,
+	TP_PROTO(struct cdns3_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdns3_log_request, cdns3_free_request,
+	TP_PROTO(struct cdns3_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdns3_log_request, cdns3_ep_queue,
+	TP_PROTO(struct cdns3_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdns3_log_request, cdns3_ep_dequeue,
+	TP_PROTO(struct cdns3_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdns3_log_request, cdns3_gadget_giveback,
+	TP_PROTO(struct cdns3_request *req),
+	TP_ARGS(req)
+);
+
+TRACE_EVENT(cdns3_ep0_queue,
+	TP_PROTO(struct cdns3_device *dev_priv, struct usb_request *request),
+	TP_ARGS(dev_priv, request),
+	TP_STRUCT__entry(
+		__field(int, dir)
+		__field(int, length)
+	),
+	TP_fast_assign(
+		__entry->dir = dev_priv->ep0_data_dir;
+		__entry->length = request->length;
+	),
+	TP_printk("Queue to ep0%s length: %u", __entry->dir ? "in" : "out",
+		  __entry->length)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_aligned_request,
+	TP_PROTO(struct cdns3_request *priv_req),
+	TP_ARGS(priv_req),
+	TP_STRUCT__entry(
+		__string(name, priv_req->priv_ep->name)
+		__field(struct usb_request *, req)
+		__field(void *, buf)
+		__field(dma_addr_t, dma)
+		__field(void *, aligned_buf)
+		__field(dma_addr_t, aligned_dma)
+		__field(u32, aligned_buf_size)
+	),
+	TP_fast_assign(
+		__assign_str(name);
+		__entry->req = &priv_req->request;
+		__entry->buf = priv_req->request.buf;
+		__entry->dma = priv_req->request.dma;
+		__entry->aligned_buf = priv_req->aligned_buf->buf;
+		__entry->aligned_dma = priv_req->aligned_buf->dma;
+		__entry->aligned_buf_size = priv_req->aligned_buf->size;
+	),
+	TP_printk("%s: req: %p, req buf %p, dma %pad a_buf %p a_dma %pad, size %d",
+		__get_str(name), __entry->req, __entry->buf, &__entry->dma,
+		__entry->aligned_buf, &__entry->aligned_dma,
+		__entry->aligned_buf_size
+	)
+);
+
+DEFINE_EVENT(cdns3_log_aligned_request, cdns3_free_aligned_request,
+	TP_PROTO(struct cdns3_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdns3_log_aligned_request, cdns3_prepare_aligned_request,
+	TP_PROTO(struct cdns3_request *req),
+	TP_ARGS(req)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_trb,
+	TP_PROTO(struct cdns3_endpoint *priv_ep, struct cdns3_trb *trb),
+	TP_ARGS(priv_ep, trb),
+	TP_STRUCT__entry(
+		__string(name, priv_ep->name)
+		__field(struct cdns3_trb *, trb)
+		__field(u32, buffer)
+		__field(u32, length)
+		__field(u32, control)
+		__field(u32, type)
+		__field(unsigned int, last_stream_id)
+	),
+	TP_fast_assign(
+		__assign_str(name);
+		__entry->trb = trb;
+		__entry->buffer = le32_to_cpu(trb->buffer);
+		__entry->length = le32_to_cpu(trb->length);
+		__entry->control = le32_to_cpu(trb->control);
+		__entry->type = usb_endpoint_type(priv_ep->endpoint.desc);
+		__entry->last_stream_id = priv_ep->last_stream_id;
+	),
+	TP_printk("%s: trb %p, dma buf: 0x%08x, size: %ld, burst: %d ctrl: 0x%08x (%s%s%s%s%s%s%s) SID:%lu LAST_SID:%u",
+		__get_str(name), __entry->trb, __entry->buffer,
+		TRB_LEN(__entry->length),
+		(u8)TRB_BURST_LEN_GET(__entry->length),
+		__entry->control,
+		__entry->control & TRB_CYCLE ? "C=1, " : "C=0, ",
+		__entry->control & TRB_TOGGLE ? "T=1, " : "T=0, ",
+		__entry->control & TRB_ISP ? "ISP, " : "",
+		__entry->control & TRB_FIFO_MODE ? "FIFO, " : "",
+		__entry->control & TRB_CHAIN ? "CHAIN, " : "",
+		__entry->control & TRB_IOC ? "IOC, " : "",
+		TRB_FIELD_TO_TYPE(__entry->control) == TRB_NORMAL ? "Normal" : "LINK",
+		TRB_FIELD_TO_STREAMID(__entry->control),
+		__entry->last_stream_id
+	)
+);
+
+DEFINE_EVENT(cdns3_log_trb, cdns3_prepare_trb,
+	TP_PROTO(struct cdns3_endpoint *priv_ep, struct cdns3_trb *trb),
+	TP_ARGS(priv_ep, trb)
+);
+
+DEFINE_EVENT(cdns3_log_trb, cdns3_complete_trb,
+	TP_PROTO(struct cdns3_endpoint *priv_ep, struct cdns3_trb *trb),
+	TP_ARGS(priv_ep, trb)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_ring,
+	TP_PROTO(struct cdns3_endpoint *priv_ep),
+	TP_ARGS(priv_ep),
+	TP_STRUCT__entry(
+		__dynamic_array(char, buffer,
+				GET_TRBS_PER_SEGMENT(priv_ep->type) > TRBS_PER_SEGMENT ?
+				CDNS3_MSG_MAX :
+				(GET_TRBS_PER_SEGMENT(priv_ep->type) * 65) + CDNS3_MSG_MAX)
+	),
+	TP_fast_assign(
+		cdns3_dbg_ring(priv_ep, __get_str(buffer));
+	),
+
+	TP_printk("%s", __get_str(buffer))
+);
+
+DEFINE_EVENT(cdns3_log_ring, cdns3_ring,
+	TP_PROTO(struct cdns3_endpoint *priv_ep),
+	TP_ARGS(priv_ep)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_ep,
+	TP_PROTO(struct cdns3_endpoint *priv_ep),
+	TP_ARGS(priv_ep),
+	TP_STRUCT__entry(
+		__string(name, priv_ep->name)
+		__field(unsigned int, maxpacket)
+		__field(unsigned int, maxpacket_limit)
+		__field(unsigned int, max_streams)
+		__field(unsigned int, use_streams)
+		__field(unsigned int, maxburst)
+		__field(unsigned int, flags)
+		__field(unsigned int, dir)
+		__field(u8, enqueue)
+		__field(u8, dequeue)
+	),
+	TP_fast_assign(
+		__assign_str(name);
+		__entry->maxpacket = priv_ep->endpoint.maxpacket;
+		__entry->maxpacket_limit = priv_ep->endpoint.maxpacket_limit;
+		__entry->max_streams = priv_ep->endpoint.max_streams;
+		__entry->use_streams = priv_ep->use_streams;
+		__entry->maxburst = priv_ep->endpoint.maxburst;
+		__entry->flags = priv_ep->flags;
+		__entry->dir = priv_ep->dir;
+		__entry->enqueue = priv_ep->enqueue;
+		__entry->dequeue = priv_ep->dequeue;
+	),
+	TP_printk("%s: mps: %d/%d. streams: %d, stream enable: %d, burst: %d, "
+		  "enq idx: %d, deq idx: %d, flags %s%s%s%s%s%s%s%s, dir: %s",
+		__get_str(name), __entry->maxpacket,
+		__entry->maxpacket_limit, __entry->max_streams,
+		__entry->use_streams,
+		__entry->maxburst, __entry->enqueue,
+		__entry->dequeue,
+		__entry->flags & EP_ENABLED ? "EN | " : "",
+		__entry->flags & EP_STALLED ? "STALLED | " : "",
+		__entry->flags & EP_WEDGE ? "WEDGE | " : "",
+		__entry->flags & EP_TRANSFER_STARTED ? "STARTED | " : "",
+		__entry->flags & EP_UPDATE_EP_TRBADDR ? "UPD TRB | " : "",
+		__entry->flags & EP_PENDING_REQUEST ? "REQ PEN | " : "",
+		__entry->flags & EP_RING_FULL ? "RING FULL |" : "",
+		__entry->flags & EP_CLAIMED ?  "CLAIMED " : "",
+		__entry->dir ? "IN" : "OUT"
+	)
+);
+
+DEFINE_EVENT(cdns3_log_ep, cdns3_gadget_ep_enable,
+	TP_PROTO(struct cdns3_endpoint *priv_ep),
+	TP_ARGS(priv_ep)
+);
+
+DEFINE_EVENT(cdns3_log_ep, cdns3_gadget_ep_disable,
+	TP_PROTO(struct cdns3_endpoint *priv_ep),
+	TP_ARGS(priv_ep)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_request_handled,
+	TP_PROTO(struct cdns3_request *priv_req, int current_index,
+		 int handled),
+	TP_ARGS(priv_req, current_index, handled),
+	TP_STRUCT__entry(
+		__field(struct cdns3_request *, priv_req)
+		__field(unsigned int, dma_position)
+		__field(unsigned int, handled)
+		__field(unsigned int, dequeue_idx)
+		__field(unsigned int, enqueue_idx)
+		__field(unsigned int, start_trb)
+		__field(unsigned int, end_trb)
+	),
+	TP_fast_assign(
+		__entry->priv_req = priv_req;
+		__entry->dma_position = current_index;
+		__entry->handled = handled;
+		__entry->dequeue_idx = priv_req->priv_ep->dequeue;
+		__entry->enqueue_idx = priv_req->priv_ep->enqueue;
+		__entry->start_trb = priv_req->start_trb;
+		__entry->end_trb = priv_req->end_trb;
+	),
+	TP_printk("Req: %p %s, DMA pos: %d, ep deq: %d, ep enq: %d,"
+		  " start trb: %d, end trb: %d",
+		__entry->priv_req,
+		__entry->handled ? "handled" : "not handled",
+		__entry->dma_position, __entry->dequeue_idx,
+		__entry->enqueue_idx, __entry->start_trb,
+		__entry->end_trb
+	)
+);
+
+DEFINE_EVENT(cdns3_log_request_handled, cdns3_request_handled,
+	TP_PROTO(struct cdns3_request *priv_req, int current_index,
+		 int handled),
+	TP_ARGS(priv_req, current_index, handled)
+);
+#endif /* __LINUX_CDNS3_TRACE */
+
+/* this part must be outside header guard */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE cdns3-trace
+
+#include <trace/define_trace.h>
diff --git a/drivers/usb/cdns3/cdnsp-debug.h b/drivers/usb/cdns3/cdnsp-debug.h
new file mode 100644
index 000000000..86860686d
--- /dev/null
+++ b/drivers/usb/cdns3/cdnsp-debug.h
@@ -0,0 +1,584 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Cadence CDNSP DRD Driver.
+ *
+ * Copyright (C) 2020 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ *
+ */
+#ifndef __LINUX_CDNSP_DEBUG
+#define __LINUX_CDNSP_DEBUG
+
+static inline const char *cdnsp_trb_comp_code_string(u8 status)
+{
+	switch (status) {
+	case COMP_INVALID:
+		return "Invalid";
+	case COMP_SUCCESS:
+		return "Success";
+	case COMP_DATA_BUFFER_ERROR:
+		return "Data Buffer Error";
+	case COMP_BABBLE_DETECTED_ERROR:
+		return "Babble Detected";
+	case COMP_TRB_ERROR:
+		return "TRB Error";
+	case COMP_RESOURCE_ERROR:
+		return "Resource Error";
+	case COMP_NO_SLOTS_AVAILABLE_ERROR:
+		return "No Slots Available Error";
+	case COMP_INVALID_STREAM_TYPE_ERROR:
+		return "Invalid Stream Type Error";
+	case COMP_SLOT_NOT_ENABLED_ERROR:
+		return "Slot Not Enabled Error";
+	case COMP_ENDPOINT_NOT_ENABLED_ERROR:
+		return "Endpoint Not Enabled Error";
+	case COMP_SHORT_PACKET:
+		return "Short Packet";
+	case COMP_RING_UNDERRUN:
+		return "Ring Underrun";
+	case COMP_RING_OVERRUN:
+		return "Ring Overrun";
+	case COMP_VF_EVENT_RING_FULL_ERROR:
+		return "VF Event Ring Full Error";
+	case COMP_PARAMETER_ERROR:
+		return "Parameter Error";
+	case COMP_CONTEXT_STATE_ERROR:
+		return "Context State Error";
+	case COMP_EVENT_RING_FULL_ERROR:
+		return "Event Ring Full Error";
+	case COMP_INCOMPATIBLE_DEVICE_ERROR:
+		return "Incompatible Device Error";
+	case COMP_MISSED_SERVICE_ERROR:
+		return "Missed Service Error";
+	case COMP_COMMAND_RING_STOPPED:
+		return "Command Ring Stopped";
+	case COMP_COMMAND_ABORTED:
+		return "Command Aborted";
+	case COMP_STOPPED:
+		return "Stopped";
+	case COMP_STOPPED_LENGTH_INVALID:
+		return "Stopped - Length Invalid";
+	case COMP_STOPPED_SHORT_PACKET:
+		return "Stopped - Short Packet";
+	case COMP_MAX_EXIT_LATENCY_TOO_LARGE_ERROR:
+		return "Max Exit Latency Too Large Error";
+	case COMP_ISOCH_BUFFER_OVERRUN:
+		return "Isoch Buffer Overrun";
+	case COMP_EVENT_LOST_ERROR:
+		return "Event Lost Error";
+	case COMP_UNDEFINED_ERROR:
+		return "Undefined Error";
+	case COMP_INVALID_STREAM_ID_ERROR:
+		return "Invalid Stream ID Error";
+	default:
+		return "Unknown!!";
+	}
+}
+
+static inline const char *cdnsp_trb_type_string(u8 type)
+{
+	switch (type) {
+	case TRB_NORMAL:
+		return "Normal";
+	case TRB_SETUP:
+		return "Setup Stage";
+	case TRB_DATA:
+		return "Data Stage";
+	case TRB_STATUS:
+		return "Status Stage";
+	case TRB_ISOC:
+		return "Isoch";
+	case TRB_LINK:
+		return "Link";
+	case TRB_EVENT_DATA:
+		return "Event Data";
+	case TRB_TR_NOOP:
+		return "No-Op";
+	case TRB_ENABLE_SLOT:
+		return "Enable Slot Command";
+	case TRB_DISABLE_SLOT:
+		return "Disable Slot Command";
+	case TRB_ADDR_DEV:
+		return "Address Device Command";
+	case TRB_CONFIG_EP:
+		return "Configure Endpoint Command";
+	case TRB_EVAL_CONTEXT:
+		return "Evaluate Context Command";
+	case TRB_RESET_EP:
+		return "Reset Endpoint Command";
+	case TRB_STOP_RING:
+		return "Stop Ring Command";
+	case TRB_SET_DEQ:
+		return "Set TR Dequeue Pointer Command";
+	case TRB_RESET_DEV:
+		return "Reset Device Command";
+	case TRB_FORCE_HEADER:
+		return "Force Header Command";
+	case TRB_CMD_NOOP:
+		return "No-Op Command";
+	case TRB_TRANSFER:
+		return "Transfer Event";
+	case TRB_COMPLETION:
+		return "Command Completion Event";
+	case TRB_PORT_STATUS:
+		return "Port Status Change Event";
+	case TRB_HC_EVENT:
+		return "Device Controller Event";
+	case TRB_MFINDEX_WRAP:
+		return "MFINDEX Wrap Event";
+	case TRB_ENDPOINT_NRDY:
+		return "Endpoint Not ready";
+	case TRB_HALT_ENDPOINT:
+		return "Halt Endpoint";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+static inline const char *cdnsp_ring_type_string(enum cdnsp_ring_type type)
+{
+	switch (type) {
+	case TYPE_CTRL:
+		return "CTRL";
+	case TYPE_ISOC:
+		return "ISOC";
+	case TYPE_BULK:
+		return "BULK";
+	case TYPE_INTR:
+		return "INTR";
+	case TYPE_STREAM:
+		return "STREAM";
+	case TYPE_COMMAND:
+		return "CMD";
+	case TYPE_EVENT:
+		return "EVENT";
+	}
+
+	return "UNKNOWN";
+}
+
+static inline char *cdnsp_slot_state_string(u32 state)
+{
+	switch (state) {
+	case SLOT_STATE_ENABLED:
+		return "enabled/disabled";
+	case SLOT_STATE_DEFAULT:
+		return "default";
+	case SLOT_STATE_ADDRESSED:
+		return "addressed";
+	case SLOT_STATE_CONFIGURED:
+		return "configured";
+	default:
+		return "reserved";
+	}
+}
+
+static inline const char *cdnsp_decode_trb(char *str, size_t size, u32 field0,
+					   u32 field1, u32 field2, u32 field3)
+{
+	int ep_id = TRB_TO_EP_INDEX(field3) - 1;
+	int type = TRB_FIELD_TO_TYPE(field3);
+	unsigned int ep_num;
+	int ret;
+	u32 temp;
+
+	ep_num = DIV_ROUND_UP(ep_id, 2);
+
+	switch (type) {
+	case TRB_LINK:
+		ret = scnprintf(str, size,
+				"LINK %08x%08x intr %ld type '%s' flags %c:%c:%c:%c",
+				field1, field0, GET_INTR_TARGET(field2),
+				cdnsp_trb_type_string(type),
+				field3 & TRB_IOC ? 'I' : 'i',
+				field3 & TRB_CHAIN ? 'C' : 'c',
+				field3 & TRB_TC ? 'T' : 't',
+				field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_TRANSFER:
+	case TRB_COMPLETION:
+	case TRB_PORT_STATUS:
+	case TRB_HC_EVENT:
+		ret = scnprintf(str, size,
+				"ep%d%s(%d) type '%s' TRB %08x%08x status '%s'"
+				" len %ld slot %ld flags %c:%c",
+				ep_num, ep_id % 2 ? "out" : "in",
+				TRB_TO_EP_INDEX(field3),
+				cdnsp_trb_type_string(type), field1, field0,
+				cdnsp_trb_comp_code_string(GET_COMP_CODE(field2)),
+				EVENT_TRB_LEN(field2), TRB_TO_SLOT_ID(field3),
+				field3 & EVENT_DATA ? 'E' : 'e',
+				field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_MFINDEX_WRAP:
+		ret = scnprintf(str, size, "%s: flags %c",
+				cdnsp_trb_type_string(type),
+				field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_SETUP:
+		ret = scnprintf(str, size,
+				"type '%s' bRequestType %02x bRequest %02x "
+				"wValue %02x%02x wIndex %02x%02x wLength %d "
+				"length %ld TD size %ld intr %ld Setup ID %ld "
+				"flags %c:%c:%c",
+				cdnsp_trb_type_string(type),
+				field0 & 0xff,
+				(field0 & 0xff00) >> 8,
+				(field0 & 0xff000000) >> 24,
+				(field0 & 0xff0000) >> 16,
+				(field1 & 0xff00) >> 8,
+				field1 & 0xff,
+				(field1 & 0xff000000) >> 16 |
+				(field1 & 0xff0000) >> 16,
+				TRB_LEN(field2), GET_TD_SIZE(field2),
+				GET_INTR_TARGET(field2),
+				TRB_SETUPID_TO_TYPE(field3),
+				field3 & TRB_IDT ? 'D' : 'd',
+				field3 & TRB_IOC ? 'I' : 'i',
+				field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_DATA:
+		ret = scnprintf(str, size,
+				"type '%s' Buffer %08x%08x length %ld TD size %ld "
+				"intr %ld flags %c:%c:%c:%c:%c:%c:%c",
+				cdnsp_trb_type_string(type),
+				field1, field0, TRB_LEN(field2),
+				GET_TD_SIZE(field2),
+				GET_INTR_TARGET(field2),
+				field3 & TRB_IDT ? 'D' : 'i',
+				field3 & TRB_IOC ? 'I' : 'i',
+				field3 & TRB_CHAIN ? 'C' : 'c',
+				field3 & TRB_NO_SNOOP ? 'S' : 's',
+				field3 & TRB_ISP ? 'I' : 'i',
+				field3 & TRB_ENT ? 'E' : 'e',
+				field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_STATUS:
+		ret = scnprintf(str, size,
+				"Buffer %08x%08x length %ld TD size %ld intr"
+				"%ld type '%s' flags %c:%c:%c:%c",
+				field1, field0, TRB_LEN(field2),
+				GET_TD_SIZE(field2),
+				GET_INTR_TARGET(field2),
+				cdnsp_trb_type_string(type),
+				field3 & TRB_IOC ? 'I' : 'i',
+				field3 & TRB_CHAIN ? 'C' : 'c',
+				field3 & TRB_ENT ? 'E' : 'e',
+				field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_NORMAL:
+	case TRB_ISOC:
+	case TRB_EVENT_DATA:
+	case TRB_TR_NOOP:
+		ret = scnprintf(str, size,
+				"type '%s' Buffer %08x%08x length %ld "
+				"TD size %ld intr %ld "
+				"flags %c:%c:%c:%c:%c:%c:%c:%c:%c",
+				cdnsp_trb_type_string(type),
+				field1, field0, TRB_LEN(field2),
+				GET_TD_SIZE(field2),
+				GET_INTR_TARGET(field2),
+				field3 & TRB_BEI ? 'B' : 'b',
+				field3 & TRB_IDT ? 'T' : 't',
+				field3 & TRB_IOC ? 'I' : 'i',
+				field3 & TRB_CHAIN ? 'C' : 'c',
+				field3 & TRB_NO_SNOOP ? 'S' : 's',
+				field3 & TRB_ISP ? 'I' : 'i',
+				field3 & TRB_ENT ? 'E' : 'e',
+				field3 & TRB_CYCLE ? 'C' : 'c',
+				!(field3 & TRB_EVENT_INVALIDATE) ? 'V' : 'v');
+		break;
+	case TRB_CMD_NOOP:
+	case TRB_ENABLE_SLOT:
+		ret = scnprintf(str, size, "%s: flags %c",
+				cdnsp_trb_type_string(type),
+				field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_DISABLE_SLOT:
+		ret = scnprintf(str, size, "%s: slot %ld flags %c",
+				cdnsp_trb_type_string(type),
+				TRB_TO_SLOT_ID(field3),
+				field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_ADDR_DEV:
+		ret = scnprintf(str, size,
+				"%s: ctx %08x%08x slot %ld flags %c:%c",
+				cdnsp_trb_type_string(type), field1, field0,
+				TRB_TO_SLOT_ID(field3),
+				field3 & TRB_BSR ? 'B' : 'b',
+				field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_CONFIG_EP:
+		ret = scnprintf(str, size,
+				"%s: ctx %08x%08x slot %ld flags %c:%c",
+				cdnsp_trb_type_string(type), field1, field0,
+				TRB_TO_SLOT_ID(field3),
+				field3 & TRB_DC ? 'D' : 'd',
+				field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_EVAL_CONTEXT:
+		ret = scnprintf(str, size,
+				"%s: ctx %08x%08x slot %ld flags %c",
+				cdnsp_trb_type_string(type), field1, field0,
+				TRB_TO_SLOT_ID(field3),
+				field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_RESET_EP:
+	case TRB_HALT_ENDPOINT:
+		ret = scnprintf(str, size,
+				"%s: ep%d%s(%d) ctx %08x%08x slot %ld flags %c %c",
+				cdnsp_trb_type_string(type),
+				ep_num, ep_id % 2 ? "out" : "in",
+				TRB_TO_EP_INDEX(field3), field1, field0,
+				TRB_TO_SLOT_ID(field3),
+				field3 & TRB_CYCLE ? 'C' : 'c',
+				field3 & TRB_ESP ? 'P' : 'p');
+		break;
+	case TRB_STOP_RING:
+		ret = scnprintf(str, size,
+				"%s: ep%d%s(%d) slot %ld sp %d flags %c",
+				cdnsp_trb_type_string(type),
+				ep_num, ep_id % 2 ? "out" : "in",
+				TRB_TO_EP_INDEX(field3),
+				TRB_TO_SLOT_ID(field3),
+				TRB_TO_SUSPEND_PORT(field3),
+				field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_SET_DEQ:
+		ret = scnprintf(str, size,
+				"%s: ep%d%s(%d) deq %08x%08x stream %ld slot %ld  flags %c",
+				cdnsp_trb_type_string(type),
+				ep_num, ep_id % 2 ? "out" : "in",
+				TRB_TO_EP_INDEX(field3), field1, field0,
+				TRB_TO_STREAM_ID(field2),
+				TRB_TO_SLOT_ID(field3),
+				field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_RESET_DEV:
+		ret = scnprintf(str, size, "%s: slot %ld flags %c",
+				cdnsp_trb_type_string(type),
+				TRB_TO_SLOT_ID(field3),
+				field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	case TRB_ENDPOINT_NRDY:
+		temp = TRB_TO_HOST_STREAM(field2);
+
+		ret = scnprintf(str, size,
+				"%s: ep%d%s(%d) H_SID %x%s%s D_SID %lx flags %c:%c",
+				cdnsp_trb_type_string(type),
+				ep_num, ep_id % 2 ? "out" : "in",
+				TRB_TO_EP_INDEX(field3), temp,
+				temp == STREAM_PRIME_ACK ? "(PRIME)" : "",
+				temp == STREAM_REJECTED ? "(REJECTED)" : "",
+				TRB_TO_DEV_STREAM(field0),
+				field3 & TRB_STAT ? 'S' : 's',
+				field3 & TRB_CYCLE ? 'C' : 'c');
+		break;
+	default:
+		ret = scnprintf(str, size,
+				"type '%s' -> raw %08x %08x %08x %08x",
+				cdnsp_trb_type_string(type),
+				field0, field1, field2, field3);
+	}
+
+	if (ret == size - 1)
+		pr_info("CDNSP: buffer may be truncated.\n");
+
+	return str;
+}
+
+static inline const char *cdnsp_decode_slot_context(u32 info, u32 info2,
+						    u32 int_target, u32 state)
+{
+	static char str[1024];
+	int ret = 0;
+	u32 speed;
+	char *s;
+
+	speed = info & DEV_SPEED;
+
+	switch (speed) {
+	case SLOT_SPEED_FS:
+		s = "full-speed";
+		break;
+	case SLOT_SPEED_HS:
+		s = "high-speed";
+		break;
+	case SLOT_SPEED_SS:
+		s = "super-speed";
+		break;
+	case SLOT_SPEED_SSP:
+		s = "super-speed plus";
+		break;
+	default:
+		s = "UNKNOWN speed";
+	}
+
+	ret = sprintf(str, "%s Ctx Entries %d",
+		      s, (info & LAST_CTX_MASK) >> 27);
+
+	ret += sprintf(str + ret, " [Intr %ld] Addr %ld State %s",
+		       GET_INTR_TARGET(int_target), state & DEV_ADDR_MASK,
+		       cdnsp_slot_state_string(GET_SLOT_STATE(state)));
+
+	return str;
+}
+
+static inline const char *cdnsp_portsc_link_state_string(u32 portsc)
+{
+	switch (portsc & PORT_PLS_MASK) {
+	case XDEV_U0:
+		return "U0";
+	case XDEV_U1:
+		return "U1";
+	case XDEV_U2:
+		return "U2";
+	case XDEV_U3:
+		return "U3";
+	case XDEV_DISABLED:
+		return "Disabled";
+	case XDEV_RXDETECT:
+		return "RxDetect";
+	case XDEV_INACTIVE:
+		return "Inactive";
+	case XDEV_POLLING:
+		return "Polling";
+	case XDEV_RECOVERY:
+		return "Recovery";
+	case XDEV_HOT_RESET:
+		return "Hot Reset";
+	case XDEV_COMP_MODE:
+		return "Compliance mode";
+	case XDEV_TEST_MODE:
+		return "Test mode";
+	case XDEV_RESUME:
+		return "Resume";
+	default:
+		break;
+	}
+
+	return "Unknown";
+}
+
+static inline const char *cdnsp_decode_portsc(char *str, size_t size,
+					      u32 portsc)
+{
+	int ret;
+
+	ret = scnprintf(str, size, "%s %s %s Link:%s PortSpeed:%d ",
+			portsc & PORT_POWER ? "Powered" : "Powered-off",
+			portsc & PORT_CONNECT ? "Connected" : "Not-connected",
+			portsc & PORT_PED ? "Enabled" : "Disabled",
+			cdnsp_portsc_link_state_string(portsc),
+			DEV_PORT_SPEED(portsc));
+
+	if (portsc & PORT_RESET)
+		ret += scnprintf(str + ret, size - ret, "In-Reset ");
+
+	ret += scnprintf(str + ret, size - ret, "Change: ");
+	if (portsc & PORT_CSC)
+		ret += scnprintf(str + ret, size - ret, "CSC ");
+	if (portsc & PORT_WRC)
+		ret += scnprintf(str + ret, size - ret, "WRC ");
+	if (portsc & PORT_RC)
+		ret += scnprintf(str + ret, size - ret, "PRC ");
+	if (portsc & PORT_PLC)
+		ret += scnprintf(str + ret, size - ret, "PLC ");
+	if (portsc & PORT_CEC)
+		ret += scnprintf(str + ret, size - ret, "CEC ");
+	ret += scnprintf(str + ret, size - ret, "Wake: ");
+	if (portsc & PORT_WKCONN_E)
+		ret += scnprintf(str + ret, size - ret, "WCE ");
+	if (portsc & PORT_WKDISC_E)
+		ret += scnprintf(str + ret, size - ret, "WDE ");
+
+	return str;
+}
+
+static inline const char *cdnsp_ep_state_string(u8 state)
+{
+	switch (state) {
+	case EP_STATE_DISABLED:
+		return "disabled";
+	case EP_STATE_RUNNING:
+		return "running";
+	case EP_STATE_HALTED:
+		return "halted";
+	case EP_STATE_STOPPED:
+		return "stopped";
+	case EP_STATE_ERROR:
+		return "error";
+	default:
+		return "INVALID";
+	}
+}
+
+static inline const char *cdnsp_ep_type_string(u8 type)
+{
+	switch (type) {
+	case ISOC_OUT_EP:
+		return "Isoc OUT";
+	case BULK_OUT_EP:
+		return "Bulk OUT";
+	case INT_OUT_EP:
+		return "Int OUT";
+	case CTRL_EP:
+		return "Ctrl";
+	case ISOC_IN_EP:
+		return "Isoc IN";
+	case BULK_IN_EP:
+		return "Bulk IN";
+	case INT_IN_EP:
+		return "Int IN";
+	default:
+		return "INVALID";
+	}
+}
+
+static inline const char *cdnsp_decode_ep_context(char *str, size_t size,
+						  u32 info, u32 info2,
+						  u64 deq, u32 tx_info)
+{
+	u8 max_pstr, ep_state, interval, ep_type, burst, cerr, mult;
+	bool lsa, hid;
+	u16 maxp, avg;
+	u32 esit;
+	int ret;
+
+	esit = CTX_TO_MAX_ESIT_PAYLOAD_HI(info) << 16 |
+	       CTX_TO_MAX_ESIT_PAYLOAD_LO(tx_info);
+
+	ep_state = info & EP_STATE_MASK;
+	max_pstr = CTX_TO_EP_MAXPSTREAMS(info);
+	interval = CTX_TO_EP_INTERVAL(info);
+	mult = CTX_TO_EP_MULT(info) + 1;
+	lsa = !!(info & EP_HAS_LSA);
+
+	cerr = (info2 & (3 << 1)) >> 1;
+	ep_type = CTX_TO_EP_TYPE(info2);
+	hid = !!(info2 & (1 << 7));
+	burst = CTX_TO_MAX_BURST(info2);
+	maxp = MAX_PACKET_DECODED(info2);
+
+	avg = EP_AVG_TRB_LENGTH(tx_info);
+
+	ret = scnprintf(str, size, "State %s mult %d max P. Streams %d %s",
+			cdnsp_ep_state_string(ep_state), mult,
+			max_pstr, lsa ? "LSA " : "");
+
+	ret += scnprintf(str + ret, size - ret,
+			 "interval %d us max ESIT payload %d CErr %d ",
+			 (1 << interval) * 125, esit, cerr);
+
+	ret += scnprintf(str + ret, size - ret,
+			 "Type %s %sburst %d maxp %d deq %016llx ",
+			 cdnsp_ep_type_string(ep_type), hid ? "HID" : "",
+			 burst, maxp, deq);
+
+	ret += scnprintf(str + ret, size - ret, "avg trb len %d", avg);
+
+	return str;
+}
+
+#endif /*__LINUX_CDNSP_DEBUG*/
diff --git a/drivers/usb/cdns3/cdnsp-ep0.c b/drivers/usb/cdns3/cdnsp-ep0.c
new file mode 100644
index 000000000..5cd9b898c
--- /dev/null
+++ b/drivers/usb/cdns3/cdnsp-ep0.c
@@ -0,0 +1,483 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence CDNSP DRD Driver.
+ *
+ * Copyright (C) 2020 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ *
+ */
+
+#include <linux/usb/composite.h>
+#include <linux/usb/gadget.h>
+#include <linux/list.h>
+
+#include "cdnsp-gadget.h"
+#include "cdnsp-trace.h"
+
+static void cdnsp_ep0_stall(struct cdnsp_device *pdev)
+{
+	struct cdnsp_request *preq;
+	struct cdnsp_ep *pep;
+
+	pep = &pdev->eps[0];
+	preq = next_request(&pep->pending_list);
+
+	if (pdev->three_stage_setup) {
+		cdnsp_halt_endpoint(pdev, pep, true);
+
+		if (preq)
+			cdnsp_gadget_giveback(pep, preq, -ECONNRESET);
+	} else {
+		pep->ep_state |= EP0_HALTED_STATUS;
+
+		if (preq)
+			list_del(&preq->list);
+
+		cdnsp_status_stage(pdev);
+	}
+}
+
+static int cdnsp_ep0_delegate_req(struct cdnsp_device *pdev,
+				  struct usb_ctrlrequest *ctrl)
+{
+	int ret;
+
+	spin_unlock(&pdev->lock);
+	ret = pdev->gadget_driver->setup(&pdev->gadget, ctrl);
+	spin_lock(&pdev->lock);
+
+	return ret;
+}
+
+static int cdnsp_ep0_set_config(struct cdnsp_device *pdev,
+				struct usb_ctrlrequest *ctrl)
+{
+	enum usb_device_state state = pdev->gadget.state;
+	u32 cfg;
+	int ret;
+
+	cfg = le16_to_cpu(ctrl->wValue);
+
+	switch (state) {
+	case USB_STATE_ADDRESS:
+		trace_cdnsp_ep0_set_config("from Address state");
+		break;
+	case USB_STATE_CONFIGURED:
+		trace_cdnsp_ep0_set_config("from Configured state");
+		break;
+	default:
+		dev_err(pdev->dev, "Set Configuration - bad device state\n");
+		return -EINVAL;
+	}
+
+	ret = cdnsp_ep0_delegate_req(pdev, ctrl);
+	if (ret)
+		return ret;
+
+	if (!cfg)
+		usb_gadget_set_state(&pdev->gadget, USB_STATE_ADDRESS);
+
+	return 0;
+}
+
+static int cdnsp_ep0_set_address(struct cdnsp_device *pdev,
+				 struct usb_ctrlrequest *ctrl)
+{
+	enum usb_device_state state = pdev->gadget.state;
+	struct cdnsp_slot_ctx *slot_ctx;
+	unsigned int slot_state;
+	int ret;
+	u32 addr;
+
+	addr = le16_to_cpu(ctrl->wValue);
+
+	if (addr > 127) {
+		dev_err(pdev->dev, "Invalid device address %d\n", addr);
+		return -EINVAL;
+	}
+
+	slot_ctx = cdnsp_get_slot_ctx(&pdev->out_ctx);
+
+	if (state == USB_STATE_CONFIGURED) {
+		dev_err(pdev->dev, "Can't Set Address from Configured State\n");
+		return -EINVAL;
+	}
+
+	pdev->device_address = le16_to_cpu(ctrl->wValue);
+
+	slot_ctx = cdnsp_get_slot_ctx(&pdev->out_ctx);
+	slot_state = GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state));
+	if (slot_state == SLOT_STATE_ADDRESSED)
+		cdnsp_reset_device(pdev);
+
+	/*set device address*/
+	ret = cdnsp_setup_device(pdev, SETUP_CONTEXT_ADDRESS);
+	if (ret)
+		return ret;
+
+	if (addr)
+		usb_gadget_set_state(&pdev->gadget, USB_STATE_ADDRESS);
+	else
+		usb_gadget_set_state(&pdev->gadget, USB_STATE_DEFAULT);
+
+	return 0;
+}
+
+int cdnsp_status_stage(struct cdnsp_device *pdev)
+{
+	pdev->ep0_stage = CDNSP_STATUS_STAGE;
+	pdev->ep0_preq.request.length = 0;
+
+	return cdnsp_ep_enqueue(pdev->ep0_preq.pep, &pdev->ep0_preq);
+}
+
+static int cdnsp_w_index_to_ep_index(u16 wIndex)
+{
+	if (!(wIndex & USB_ENDPOINT_NUMBER_MASK))
+		return 0;
+
+	return ((wIndex & USB_ENDPOINT_NUMBER_MASK) * 2) +
+		(wIndex & USB_ENDPOINT_DIR_MASK ? 1 : 0) - 1;
+}
+
+static int cdnsp_ep0_handle_status(struct cdnsp_device *pdev,
+				   struct usb_ctrlrequest *ctrl)
+{
+	struct cdnsp_ep *pep;
+	__le16 *response;
+	int ep_sts = 0;
+	u16 status = 0;
+	u32 recipient;
+
+	recipient = ctrl->bRequestType & USB_RECIP_MASK;
+
+	switch (recipient) {
+	case USB_RECIP_DEVICE:
+		status = pdev->gadget.is_selfpowered;
+		status |= pdev->may_wakeup << USB_DEVICE_REMOTE_WAKEUP;
+
+		if (pdev->gadget.speed >= USB_SPEED_SUPER) {
+			status |= pdev->u1_allowed << USB_DEV_STAT_U1_ENABLED;
+			status |= pdev->u2_allowed << USB_DEV_STAT_U2_ENABLED;
+		}
+		break;
+	case USB_RECIP_INTERFACE:
+		/*
+		 * Function Remote Wake Capable	D0
+		 * Function Remote Wakeup	D1
+		 */
+		return cdnsp_ep0_delegate_req(pdev, ctrl);
+	case USB_RECIP_ENDPOINT:
+		ep_sts = cdnsp_w_index_to_ep_index(le16_to_cpu(ctrl->wIndex));
+		pep = &pdev->eps[ep_sts];
+		ep_sts = GET_EP_CTX_STATE(pep->out_ctx);
+
+		/* check if endpoint is stalled */
+		if (ep_sts == EP_STATE_HALTED)
+			status =  BIT(USB_ENDPOINT_HALT);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	response = (__le16 *)pdev->setup_buf;
+	*response = cpu_to_le16(status);
+
+	pdev->ep0_preq.request.length = sizeof(*response);
+	pdev->ep0_preq.request.buf = pdev->setup_buf;
+
+	return cdnsp_ep_enqueue(pdev->ep0_preq.pep, &pdev->ep0_preq);
+}
+
+static void cdnsp_enter_test_mode(struct cdnsp_device *pdev)
+{
+	u32 temp;
+
+	temp = readl(&pdev->active_port->regs->portpmsc) & ~GENMASK(31, 28);
+	temp |= PORT_TEST_MODE(pdev->test_mode);
+	writel(temp, &pdev->active_port->regs->portpmsc);
+}
+
+static int cdnsp_ep0_handle_feature_device(struct cdnsp_device *pdev,
+					   struct usb_ctrlrequest *ctrl,
+					   int set)
+{
+	enum usb_device_state state;
+	enum usb_device_speed speed;
+	u16 tmode;
+
+	state = pdev->gadget.state;
+	speed = pdev->gadget.speed;
+
+	switch (le16_to_cpu(ctrl->wValue)) {
+	case USB_DEVICE_REMOTE_WAKEUP:
+		pdev->may_wakeup = !!set;
+		trace_cdnsp_may_wakeup(set);
+		break;
+	case USB_DEVICE_U1_ENABLE:
+		if (state != USB_STATE_CONFIGURED || speed < USB_SPEED_SUPER)
+			return -EINVAL;
+
+		pdev->u1_allowed = !!set;
+		trace_cdnsp_u1(set);
+		break;
+	case USB_DEVICE_U2_ENABLE:
+		if (state != USB_STATE_CONFIGURED || speed < USB_SPEED_SUPER)
+			return -EINVAL;
+
+		pdev->u2_allowed = !!set;
+		trace_cdnsp_u2(set);
+		break;
+	case USB_DEVICE_LTM_ENABLE:
+		return -EINVAL;
+	case USB_DEVICE_TEST_MODE:
+		if (state != USB_STATE_CONFIGURED || speed > USB_SPEED_HIGH)
+			return -EINVAL;
+
+		tmode = le16_to_cpu(ctrl->wIndex);
+
+		if (!set || (tmode & 0xff) != 0)
+			return -EINVAL;
+
+		tmode = tmode >> 8;
+
+		if (tmode > USB_TEST_FORCE_ENABLE || tmode < USB_TEST_J)
+			return -EINVAL;
+
+		pdev->test_mode = tmode;
+
+		/*
+		 * Test mode must be set before Status Stage but controller
+		 * will start testing sequence after Status Stage.
+		 */
+		cdnsp_enter_test_mode(pdev);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int cdnsp_ep0_handle_feature_intf(struct cdnsp_device *pdev,
+					 struct usb_ctrlrequest *ctrl,
+					 int set)
+{
+	u16 wValue, wIndex;
+	int ret;
+
+	wValue = le16_to_cpu(ctrl->wValue);
+	wIndex = le16_to_cpu(ctrl->wIndex);
+
+	switch (wValue) {
+	case USB_INTRF_FUNC_SUSPEND:
+		ret = cdnsp_ep0_delegate_req(pdev, ctrl);
+		if (ret)
+			return ret;
+
+		/*
+		 * Remote wakeup is enabled when any function within a device
+		 * is enabled for function remote wakeup.
+		 */
+		if (wIndex & USB_INTRF_FUNC_SUSPEND_RW)
+			pdev->may_wakeup++;
+		else
+			if (pdev->may_wakeup > 0)
+				pdev->may_wakeup--;
+
+		return 0;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int cdnsp_ep0_handle_feature_endpoint(struct cdnsp_device *pdev,
+					     struct usb_ctrlrequest *ctrl,
+					     int set)
+{
+	struct cdnsp_ep *pep;
+	u16 wValue;
+
+	wValue = le16_to_cpu(ctrl->wValue);
+	pep = &pdev->eps[cdnsp_w_index_to_ep_index(le16_to_cpu(ctrl->wIndex))];
+
+	switch (wValue) {
+	case USB_ENDPOINT_HALT:
+		if (!set && (pep->ep_state & EP_WEDGE)) {
+			/* Resets Sequence Number */
+			cdnsp_halt_endpoint(pdev, pep, 0);
+			cdnsp_halt_endpoint(pdev, pep, 1);
+			break;
+		}
+
+		return cdnsp_halt_endpoint(pdev, pep, set);
+	default:
+		dev_warn(pdev->dev, "WARN Incorrect wValue %04x\n", wValue);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int cdnsp_ep0_handle_feature(struct cdnsp_device *pdev,
+				    struct usb_ctrlrequest *ctrl,
+				    int set)
+{
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		return cdnsp_ep0_handle_feature_device(pdev, ctrl, set);
+	case USB_RECIP_INTERFACE:
+		return cdnsp_ep0_handle_feature_intf(pdev, ctrl, set);
+	case USB_RECIP_ENDPOINT:
+		return cdnsp_ep0_handle_feature_endpoint(pdev, ctrl, set);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int cdnsp_ep0_set_sel(struct cdnsp_device *pdev,
+			     struct usb_ctrlrequest *ctrl)
+{
+	enum usb_device_state state = pdev->gadget.state;
+	u16 wLength;
+
+	if (state == USB_STATE_DEFAULT)
+		return -EINVAL;
+
+	wLength = le16_to_cpu(ctrl->wLength);
+
+	if (wLength != 6) {
+		dev_err(pdev->dev, "Set SEL should be 6 bytes, got %d\n",
+			wLength);
+		return -EINVAL;
+	}
+
+	/*
+	 * To handle Set SEL we need to receive 6 bytes from Host. So let's
+	 * queue a usb_request for 6 bytes.
+	 */
+	pdev->ep0_preq.request.length = 6;
+	pdev->ep0_preq.request.buf = pdev->setup_buf;
+
+	return cdnsp_ep_enqueue(pdev->ep0_preq.pep, &pdev->ep0_preq);
+}
+
+static int cdnsp_ep0_set_isoch_delay(struct cdnsp_device *pdev,
+				     struct usb_ctrlrequest *ctrl)
+{
+	if (le16_to_cpu(ctrl->wIndex) || le16_to_cpu(ctrl->wLength))
+		return -EINVAL;
+
+	pdev->gadget.isoch_delay = le16_to_cpu(ctrl->wValue);
+
+	return 0;
+}
+
+static int cdnsp_ep0_std_request(struct cdnsp_device *pdev,
+				 struct usb_ctrlrequest *ctrl)
+{
+	int ret;
+
+	switch (ctrl->bRequest) {
+	case USB_REQ_GET_STATUS:
+		ret = cdnsp_ep0_handle_status(pdev, ctrl);
+		break;
+	case USB_REQ_CLEAR_FEATURE:
+		ret = cdnsp_ep0_handle_feature(pdev, ctrl, 0);
+		break;
+	case USB_REQ_SET_FEATURE:
+		ret = cdnsp_ep0_handle_feature(pdev, ctrl, 1);
+		break;
+	case USB_REQ_SET_ADDRESS:
+		ret = cdnsp_ep0_set_address(pdev, ctrl);
+		break;
+	case USB_REQ_SET_CONFIGURATION:
+		ret = cdnsp_ep0_set_config(pdev, ctrl);
+		break;
+	case USB_REQ_SET_SEL:
+		ret = cdnsp_ep0_set_sel(pdev, ctrl);
+		break;
+	case USB_REQ_SET_ISOCH_DELAY:
+		ret = cdnsp_ep0_set_isoch_delay(pdev, ctrl);
+		break;
+	default:
+		ret = cdnsp_ep0_delegate_req(pdev, ctrl);
+		break;
+	}
+
+	return ret;
+}
+
+void cdnsp_setup_analyze(struct cdnsp_device *pdev)
+{
+	struct usb_ctrlrequest *ctrl = &pdev->setup;
+	struct cdnsp_ep *pep;
+	int ret = -EINVAL;
+	u16 len;
+
+	trace_cdnsp_ctrl_req(ctrl);
+
+	if (!pdev->gadget_driver)
+		goto out;
+
+	if (pdev->gadget.state == USB_STATE_NOTATTACHED) {
+		dev_err(pdev->dev, "ERR: Setup detected in unattached state\n");
+		goto out;
+	}
+
+	pep = &pdev->eps[0];
+
+	/* Restore the ep0 to Stopped/Running state. */
+	if (pep->ep_state & EP_HALTED) {
+		if (GET_EP_CTX_STATE(pep->out_ctx) == EP_STATE_HALTED)
+			cdnsp_halt_endpoint(pdev, pep, 0);
+
+		/*
+		 * Halt Endpoint Command for SSP2 for ep0 preserve current
+		 * endpoint state and driver has to synchronize the
+		 * software endpoint state with endpoint output context
+		 * state.
+		 */
+		pep->ep_state &= ~EP_HALTED;
+		pep->ep_state |= EP_STOPPED;
+	}
+
+	/*
+	 * Finishing previous SETUP transfer by removing request from
+	 * list and informing upper layer
+	 */
+	if (!list_empty(&pdev->eps[0].pending_list)) {
+		struct cdnsp_request	*req;
+
+		trace_cdnsp_ep0_request("Remove previous");
+		req = next_request(&pdev->eps[0].pending_list);
+		cdnsp_ep_dequeue(&pdev->eps[0], req);
+	}
+
+	len = le16_to_cpu(ctrl->wLength);
+	if (!len) {
+		pdev->three_stage_setup = false;
+		pdev->ep0_expect_in = false;
+	} else {
+		pdev->three_stage_setup = true;
+		pdev->ep0_expect_in = !!(ctrl->bRequestType & USB_DIR_IN);
+	}
+
+	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
+		ret = cdnsp_ep0_std_request(pdev, ctrl);
+	else
+		ret = cdnsp_ep0_delegate_req(pdev, ctrl);
+
+	if (ret == USB_GADGET_DELAYED_STATUS) {
+		trace_cdnsp_ep0_status_stage("delayed");
+		return;
+	}
+out:
+	if (ret < 0)
+		cdnsp_ep0_stall(pdev);
+	else if (!len && pdev->ep0_stage != CDNSP_STATUS_STAGE)
+		cdnsp_status_stage(pdev);
+}
diff --git a/drivers/usb/cdns3/cdnsp-gadget.c b/drivers/usb/cdns3/cdnsp-gadget.c
new file mode 100644
index 000000000..7a516e509
--- /dev/null
+++ b/drivers/usb/cdns3/cdnsp-gadget.c
@@ -0,0 +1,2095 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence CDNSP DRD Driver.
+ *
+ * Copyright (C) 2020 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ *
+ */
+
+#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/iopoll.h>
+#include <linux/delay.h>
+#include <linux/log2.h>
+#include <linux/slab.h>
+#include <linux/string_choices.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/dmi.h>
+
+#include "core.h"
+#include "gadget-export.h"
+#include "drd.h"
+#include "cdnsp-gadget.h"
+#include "cdnsp-trace.h"
+
+unsigned int cdnsp_port_speed(unsigned int port_status)
+{
+	/*Detect gadget speed based on PORTSC register*/
+	if (DEV_SUPERSPEEDPLUS(port_status) ||
+	    DEV_SSP_GEN1x2(port_status) || DEV_SSP_GEN2x2(port_status))
+		return USB_SPEED_SUPER_PLUS;
+	else if (DEV_SUPERSPEED(port_status))
+		return USB_SPEED_SUPER;
+	else if (DEV_HIGHSPEED(port_status))
+		return USB_SPEED_HIGH;
+	else if (DEV_FULLSPEED(port_status))
+		return USB_SPEED_FULL;
+
+	/* If device is detached then speed will be USB_SPEED_UNKNOWN.*/
+	return USB_SPEED_UNKNOWN;
+}
+
+/*
+ * Given a port state, this function returns a value that would result in the
+ * port being in the same state, if the value was written to the port status
+ * control register.
+ * Save Read Only (RO) bits and save read/write bits where
+ * writing a 0 clears the bit and writing a 1 sets the bit (RWS).
+ * For all other types (RW1S, RW1CS, RW, and RZ), writing a '0' has no effect.
+ */
+u32 cdnsp_port_state_to_neutral(u32 state)
+{
+	/* Save read-only status and port state. */
+	return (state & CDNSP_PORT_RO) | (state & CDNSP_PORT_RWS);
+}
+
+/**
+ * cdnsp_find_next_ext_cap - Find the offset of the extended capabilities
+ *                           with capability ID id.
+ * @base: PCI MMIO registers base address.
+ * @start: Address at which to start looking, (0 or HCC_PARAMS to start at
+ *         beginning of list)
+ * @id: Extended capability ID to search for.
+ *
+ * Returns the offset of the next matching extended capability structure.
+ * Some capabilities can occur several times,
+ * e.g., the EXT_CAPS_PROTOCOL, and this provides a way to find them all.
+ */
+int cdnsp_find_next_ext_cap(void __iomem *base, u32 start, int id)
+{
+	u32 offset = start;
+	u32 next;
+	u32 val;
+
+	if (!start || start == HCC_PARAMS_OFFSET) {
+		val = readl(base + HCC_PARAMS_OFFSET);
+		if (val == ~0)
+			return 0;
+
+		offset = HCC_EXT_CAPS(val) << 2;
+		if (!offset)
+			return 0;
+	}
+
+	do {
+		val = readl(base + offset);
+		if (val == ~0)
+			return 0;
+
+		if (EXT_CAPS_ID(val) == id && offset != start)
+			return offset;
+
+		next = EXT_CAPS_NEXT(val);
+		offset += next << 2;
+	} while (next);
+
+	return 0;
+}
+
+void cdnsp_set_link_state(struct cdnsp_device *pdev,
+			  __le32 __iomem *port_regs,
+			  u32 link_state)
+{
+	int port_num = 0xFF;
+	u32 temp;
+
+	temp = readl(port_regs);
+	temp = cdnsp_port_state_to_neutral(temp);
+	temp |= PORT_WKCONN_E | PORT_WKDISC_E;
+	writel(temp, port_regs);
+
+	temp &= ~PORT_PLS_MASK;
+	temp |= PORT_LINK_STROBE | link_state;
+
+	if (pdev->active_port)
+		port_num = pdev->active_port->port_num;
+
+	trace_cdnsp_handle_port_status(port_num, readl(port_regs));
+	writel(temp, port_regs);
+	trace_cdnsp_link_state_changed(port_num, readl(port_regs));
+}
+
+static void cdnsp_disable_port(struct cdnsp_device *pdev,
+			       struct cdnsp_port *port)
+{
+	u32 temp;
+
+	if (!port->exist)
+		return;
+
+	temp = cdnsp_port_state_to_neutral(readl(&port->regs->portsc));
+	writel(temp | PORT_PED, &port->regs->portsc);
+}
+
+static void cdnsp_clear_port_change_bit(struct cdnsp_device *pdev,
+					struct cdnsp_port *port)
+{
+	u32 portsc;
+
+	if (!port->exist)
+		return;
+
+	portsc = readl(&port->regs->portsc);
+	writel(cdnsp_port_state_to_neutral(portsc) |
+	       (portsc & PORT_CHANGE_BITS), &port->regs->portsc);
+}
+
+static void cdnsp_set_apb_timeout_value(struct cdnsp_device *pdev)
+{
+	struct cdns *cdns = dev_get_drvdata(pdev->dev);
+	__le32 __iomem *reg;
+	void __iomem *base;
+	u32 offset = 0;
+	u32 val;
+
+	if (!cdns->override_apb_timeout)
+		return;
+
+	base = &pdev->cap_regs->hc_capbase;
+	offset = cdnsp_find_next_ext_cap(base, offset, D_XEC_PRE_REGS_CAP);
+	reg = base + offset + REG_CHICKEN_BITS_3_OFFSET;
+
+	val  = readl(reg);
+	val = CHICKEN_APB_TIMEOUT_SET(val, cdns->override_apb_timeout);
+	writel(val, reg);
+}
+
+static void cdnsp_set_chicken_bits_2(struct cdnsp_device *pdev, u32 bit)
+{
+	__le32 __iomem *reg;
+	void __iomem *base;
+	u32 offset = 0;
+
+	base = &pdev->cap_regs->hc_capbase;
+	offset = cdnsp_find_next_ext_cap(base, offset, D_XEC_PRE_REGS_CAP);
+	reg = base + offset + REG_CHICKEN_BITS_2_OFFSET;
+
+	bit = readl(reg) | bit;
+	writel(bit, reg);
+}
+
+static void cdnsp_clear_chicken_bits_2(struct cdnsp_device *pdev, u32 bit)
+{
+	__le32 __iomem *reg;
+	void __iomem *base;
+	u32 offset = 0;
+
+	base = &pdev->cap_regs->hc_capbase;
+	offset = cdnsp_find_next_ext_cap(base, offset, D_XEC_PRE_REGS_CAP);
+	reg = base + offset + REG_CHICKEN_BITS_2_OFFSET;
+
+	bit = readl(reg) & ~bit;
+	writel(bit, reg);
+}
+
+/*
+ * Disable interrupts and begin the controller halting process.
+ */
+static void cdnsp_quiesce(struct cdnsp_device *pdev)
+{
+	u32 halted;
+	u32 mask;
+	u32 cmd;
+
+	mask = ~(u32)(CDNSP_IRQS);
+
+	halted = readl(&pdev->op_regs->status) & STS_HALT;
+	if (!halted)
+		mask &= ~(CMD_R_S | CMD_DEVEN);
+
+	cmd = readl(&pdev->op_regs->command);
+	cmd &= mask;
+	writel(cmd, &pdev->op_regs->command);
+}
+
+/*
+ * Force controller into halt state.
+ *
+ * Disable any IRQs and clear the run/stop bit.
+ * Controller will complete any current and actively pipelined transactions, and
+ * should halt within 16 ms of the run/stop bit being cleared.
+ * Read controller Halted bit in the status register to see when the
+ * controller is finished.
+ */
+int cdnsp_halt(struct cdnsp_device *pdev)
+{
+	int ret;
+	u32 val;
+
+	cdnsp_quiesce(pdev);
+
+	ret = readl_poll_timeout_atomic(&pdev->op_regs->status, val,
+					val & STS_HALT, 1,
+					CDNSP_MAX_HALT_USEC);
+	if (ret) {
+		dev_err(pdev->dev, "ERROR: Device halt failed\n");
+		return ret;
+	}
+
+	pdev->cdnsp_state |= CDNSP_STATE_HALTED;
+
+	return 0;
+}
+
+/*
+ * device controller died, register read returns 0xffffffff, or command never
+ * ends.
+ */
+void cdnsp_died(struct cdnsp_device *pdev)
+{
+	dev_err(pdev->dev, "ERROR: CDNSP controller not responding\n");
+	pdev->cdnsp_state |= CDNSP_STATE_DYING;
+	cdnsp_halt(pdev);
+}
+
+/*
+ * Set the run bit and wait for the device to be running.
+ */
+static int cdnsp_start(struct cdnsp_device *pdev)
+{
+	u32 temp;
+	int ret;
+
+	temp = readl(&pdev->op_regs->command);
+	temp |= (CMD_R_S | CMD_DEVEN);
+	writel(temp, &pdev->op_regs->command);
+
+	pdev->cdnsp_state = 0;
+
+	/*
+	 * Wait for the STS_HALT Status bit to be 0 to indicate the device is
+	 * running.
+	 */
+	ret = readl_poll_timeout_atomic(&pdev->op_regs->status, temp,
+					!(temp & STS_HALT), 1,
+					CDNSP_MAX_HALT_USEC);
+	if (ret) {
+		pdev->cdnsp_state = CDNSP_STATE_DYING;
+		dev_err(pdev->dev, "ERROR: Controller run failed\n");
+	}
+
+	return ret;
+}
+
+/*
+ * Reset a halted controller.
+ *
+ * This resets pipelines, timers, counters, state machines, etc.
+ * Transactions will be terminated immediately, and operational registers
+ * will be set to their defaults.
+ */
+int cdnsp_reset(struct cdnsp_device *pdev)
+{
+	u32 command;
+	u32 temp;
+	int ret;
+
+	temp = readl(&pdev->op_regs->status);
+
+	if (temp == ~(u32)0) {
+		dev_err(pdev->dev, "Device not accessible, reset failed.\n");
+		return -ENODEV;
+	}
+
+	if ((temp & STS_HALT) == 0) {
+		dev_err(pdev->dev, "Controller not halted, aborting reset.\n");
+		return -EINVAL;
+	}
+
+	command = readl(&pdev->op_regs->command);
+	command |= CMD_RESET;
+	writel(command, &pdev->op_regs->command);
+
+	ret = readl_poll_timeout_atomic(&pdev->op_regs->command, temp,
+					!(temp & CMD_RESET), 1,
+					10 * 1000);
+	if (ret) {
+		dev_err(pdev->dev, "ERROR: Controller reset failed\n");
+		return ret;
+	}
+
+	/*
+	 * CDNSP cannot write any doorbells or operational registers other
+	 * than status until the "Controller Not Ready" flag is cleared.
+	 */
+	ret = readl_poll_timeout_atomic(&pdev->op_regs->status, temp,
+					!(temp & STS_CNR), 1,
+					10 * 1000);
+
+	if (ret) {
+		dev_err(pdev->dev, "ERROR: Controller not ready to work\n");
+		return ret;
+	}
+
+	dev_dbg(pdev->dev, "Controller ready to work");
+
+	return ret;
+}
+
+/*
+ * cdnsp_get_endpoint_index - Find the index for an endpoint given its
+ * descriptor.Use the return value to right shift 1 for the bitmask.
+ *
+ * Index = (epnum * 2) + direction - 1,
+ * where direction = 0 for OUT, 1 for IN.
+ * For control endpoints, the IN index is used (OUT index is unused), so
+ * index = (epnum * 2) + direction - 1 = (epnum * 2) + 1 - 1 = (epnum * 2)
+ */
+static unsigned int
+	cdnsp_get_endpoint_index(const struct usb_endpoint_descriptor *desc)
+{
+	unsigned int index = (unsigned int)usb_endpoint_num(desc);
+
+	if (usb_endpoint_xfer_control(desc))
+		return index * 2;
+
+	return (index * 2) + (usb_endpoint_dir_in(desc) ? 1 : 0) - 1;
+}
+
+/*
+ * Find the flag for this endpoint (for use in the control context). Use the
+ * endpoint index to create a bitmask. The slot context is bit 0, endpoint 0 is
+ * bit 1, etc.
+ */
+static unsigned int
+	cdnsp_get_endpoint_flag(const struct usb_endpoint_descriptor *desc)
+{
+	return 1 << (cdnsp_get_endpoint_index(desc) + 1);
+}
+
+int cdnsp_ep_enqueue(struct cdnsp_ep *pep, struct cdnsp_request *preq)
+{
+	struct cdnsp_device *pdev = pep->pdev;
+	struct usb_request *request;
+	int ret;
+
+	if (preq->epnum == 0 && !list_empty(&pep->pending_list)) {
+		trace_cdnsp_request_enqueue_busy(preq);
+		return -EBUSY;
+	}
+
+	request = &preq->request;
+	request->actual = 0;
+	request->status = -EINPROGRESS;
+	preq->direction = pep->direction;
+	preq->epnum = pep->number;
+	preq->td.drbl = 0;
+
+	ret = usb_gadget_map_request_by_dev(pdev->dev, request, pep->direction);
+	if (ret) {
+		trace_cdnsp_request_enqueue_error(preq);
+		return ret;
+	}
+
+	list_add_tail(&preq->list, &pep->pending_list);
+
+	trace_cdnsp_request_enqueue(preq);
+
+	switch (usb_endpoint_type(pep->endpoint.desc)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		ret = cdnsp_queue_ctrl_tx(pdev, preq);
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+	case USB_ENDPOINT_XFER_INT:
+		ret = cdnsp_queue_bulk_tx(pdev, preq);
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		ret = cdnsp_queue_isoc_tx(pdev, preq);
+	}
+
+	if (ret)
+		goto unmap;
+
+	return 0;
+
+unmap:
+	usb_gadget_unmap_request_by_dev(pdev->dev, &preq->request,
+					pep->direction);
+	list_del(&preq->list);
+	trace_cdnsp_request_enqueue_error(preq);
+
+	return ret;
+}
+
+/*
+ * Remove the request's TD from the endpoint ring. This may cause the
+ * controller to stop USB transfers, potentially stopping in the middle of a
+ * TRB buffer. The controller should pick up where it left off in the TD,
+ * unless a Set Transfer Ring Dequeue Pointer is issued.
+ *
+ * The TRBs that make up the buffers for the canceled request will be "removed"
+ * from the ring. Since the ring is a contiguous structure, they can't be
+ * physically removed. Instead, there are two options:
+ *
+ *  1) If the controller is in the middle of processing the request to be
+ *     canceled, we simply move the ring's dequeue pointer past those TRBs
+ *     using the Set Transfer Ring Dequeue Pointer command. This will be
+ *     the common case, when drivers timeout on the last submitted request
+ *     and attempt to cancel.
+ *
+ *  2) If the controller is in the middle of a different TD, we turn the TRBs
+ *     into a series of 1-TRB transfer no-op TDs. No-ops shouldn't be chained.
+ *     The controller will need to invalidate the any TRBs it has cached after
+ *     the stop endpoint command.
+ *
+ *  3) The TD may have completed by the time the Stop Endpoint Command
+ *     completes, so software needs to handle that case too.
+ *
+ */
+int cdnsp_ep_dequeue(struct cdnsp_ep *pep, struct cdnsp_request *preq)
+{
+	struct cdnsp_device *pdev = pep->pdev;
+	int ret_stop = 0;
+	int ret_rem;
+
+	trace_cdnsp_request_dequeue(preq);
+
+	if (GET_EP_CTX_STATE(pep->out_ctx) == EP_STATE_RUNNING)
+		ret_stop = cdnsp_cmd_stop_ep(pdev, pep);
+
+	ret_rem = cdnsp_remove_request(pdev, preq, pep);
+
+	return ret_rem ? ret_rem : ret_stop;
+}
+
+static void cdnsp_zero_in_ctx(struct cdnsp_device *pdev)
+{
+	struct cdnsp_input_control_ctx *ctrl_ctx;
+	struct cdnsp_slot_ctx *slot_ctx;
+	struct cdnsp_ep_ctx *ep_ctx;
+	int i;
+
+	ctrl_ctx = cdnsp_get_input_control_ctx(&pdev->in_ctx);
+
+	/*
+	 * When a device's add flag and drop flag are zero, any subsequent
+	 * configure endpoint command will leave that endpoint's state
+	 * untouched. Make sure we don't leave any old state in the input
+	 * endpoint contexts.
+	 */
+	ctrl_ctx->drop_flags = 0;
+	ctrl_ctx->add_flags = 0;
+	slot_ctx = cdnsp_get_slot_ctx(&pdev->in_ctx);
+	slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK);
+
+	/* Endpoint 0 is always valid */
+	slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1));
+	for (i = 1; i < CDNSP_ENDPOINTS_NUM; ++i) {
+		ep_ctx = cdnsp_get_ep_ctx(&pdev->in_ctx, i);
+		ep_ctx->ep_info = 0;
+		ep_ctx->ep_info2 = 0;
+		ep_ctx->deq = 0;
+		ep_ctx->tx_info = 0;
+	}
+}
+
+/* Issue a configure endpoint command and wait for it to finish. */
+static int cdnsp_configure_endpoint(struct cdnsp_device *pdev)
+{
+	int ret;
+
+	cdnsp_queue_configure_endpoint(pdev, pdev->cmd.in_ctx->dma);
+	cdnsp_ring_cmd_db(pdev);
+	ret = cdnsp_wait_for_cmd_compl(pdev);
+	if (ret) {
+		dev_err(pdev->dev,
+			"ERR: unexpected command completion code 0x%x.\n", ret);
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static void cdnsp_invalidate_ep_events(struct cdnsp_device *pdev,
+				       struct cdnsp_ep *pep)
+{
+	struct cdnsp_segment *segment;
+	union cdnsp_trb *event;
+	u32 cycle_state;
+	u32  data;
+
+	event = pdev->event_ring->dequeue;
+	segment = pdev->event_ring->deq_seg;
+	cycle_state = pdev->event_ring->cycle_state;
+
+	while (1) {
+		data = le32_to_cpu(event->trans_event.flags);
+
+		/* Check the owner of the TRB. */
+		if ((data & TRB_CYCLE) != cycle_state)
+			break;
+
+		if (TRB_FIELD_TO_TYPE(data) == TRB_TRANSFER &&
+		    TRB_TO_EP_ID(data) == (pep->idx + 1)) {
+			data |= TRB_EVENT_INVALIDATE;
+			event->trans_event.flags = cpu_to_le32(data);
+		}
+
+		if (cdnsp_last_trb_on_seg(segment, event)) {
+			cycle_state ^= 1;
+			segment = pdev->event_ring->deq_seg->next;
+			event = segment->trbs;
+		} else {
+			event++;
+		}
+	}
+}
+
+int cdnsp_wait_for_cmd_compl(struct cdnsp_device *pdev)
+{
+	struct cdnsp_segment *event_deq_seg;
+	union cdnsp_trb *cmd_trb;
+	dma_addr_t cmd_deq_dma;
+	union cdnsp_trb *event;
+	u32 cycle_state;
+	u32 retry = 10;
+	int ret, val;
+	u64 cmd_dma;
+	u32  flags;
+
+	cmd_trb = pdev->cmd.command_trb;
+	pdev->cmd.status = 0;
+
+	trace_cdnsp_cmd_wait_for_compl(pdev->cmd_ring, &cmd_trb->generic);
+
+	ret = readl_poll_timeout_atomic(&pdev->op_regs->cmd_ring, val,
+					!CMD_RING_BUSY(val), 1,
+					CDNSP_CMD_TIMEOUT);
+	if (ret) {
+		dev_err(pdev->dev, "ERR: Timeout while waiting for command\n");
+		trace_cdnsp_cmd_timeout(pdev->cmd_ring, &cmd_trb->generic);
+		pdev->cdnsp_state = CDNSP_STATE_DYING;
+		return -ETIMEDOUT;
+	}
+
+	event = pdev->event_ring->dequeue;
+	event_deq_seg = pdev->event_ring->deq_seg;
+	cycle_state = pdev->event_ring->cycle_state;
+
+	cmd_deq_dma = cdnsp_trb_virt_to_dma(pdev->cmd_ring->deq_seg, cmd_trb);
+	if (!cmd_deq_dma)
+		return -EINVAL;
+
+	while (1) {
+		flags = le32_to_cpu(event->event_cmd.flags);
+
+		/* Check the owner of the TRB. */
+		if ((flags & TRB_CYCLE) != cycle_state) {
+			/*
+			 * Give some extra time to get chance controller
+			 * to finish command before returning error code.
+			 * Checking CMD_RING_BUSY is not sufficient because
+			 * this bit is cleared to '0' when the Command
+			 * Descriptor has been executed by controller
+			 * and not when command completion event has
+			 * be added to event ring.
+			 */
+			if (retry--) {
+				udelay(20);
+				continue;
+			}
+
+			return -EINVAL;
+		}
+
+		cmd_dma = le64_to_cpu(event->event_cmd.cmd_trb);
+
+		/*
+		 * Check whether the completion event is for last queued
+		 * command.
+		 */
+		if (TRB_FIELD_TO_TYPE(flags) != TRB_COMPLETION ||
+		    cmd_dma != (u64)cmd_deq_dma) {
+			if (!cdnsp_last_trb_on_seg(event_deq_seg, event)) {
+				event++;
+				continue;
+			}
+
+			if (cdnsp_last_trb_on_ring(pdev->event_ring,
+						   event_deq_seg, event))
+				cycle_state ^= 1;
+
+			event_deq_seg = event_deq_seg->next;
+			event = event_deq_seg->trbs;
+			continue;
+		}
+
+		trace_cdnsp_handle_command(pdev->cmd_ring, &cmd_trb->generic);
+
+		pdev->cmd.status = GET_COMP_CODE(le32_to_cpu(event->event_cmd.status));
+		if (pdev->cmd.status == COMP_SUCCESS)
+			return 0;
+
+		return -pdev->cmd.status;
+	}
+}
+
+int cdnsp_halt_endpoint(struct cdnsp_device *pdev,
+			struct cdnsp_ep *pep,
+			int value)
+{
+	int ret;
+
+	trace_cdnsp_ep_halt(value ? "Set" : "Clear");
+
+	ret = cdnsp_cmd_stop_ep(pdev, pep);
+	if (ret)
+		return ret;
+
+	if (value) {
+		if (GET_EP_CTX_STATE(pep->out_ctx) == EP_STATE_STOPPED) {
+			cdnsp_queue_halt_endpoint(pdev, pep->idx);
+			cdnsp_ring_cmd_db(pdev);
+			ret = cdnsp_wait_for_cmd_compl(pdev);
+		}
+
+		pep->ep_state |= EP_HALTED;
+	} else {
+		cdnsp_queue_reset_ep(pdev, pep->idx);
+		cdnsp_ring_cmd_db(pdev);
+		ret = cdnsp_wait_for_cmd_compl(pdev);
+		trace_cdnsp_handle_cmd_reset_ep(pep->out_ctx);
+
+		if (ret)
+			return ret;
+
+		pep->ep_state &= ~EP_HALTED;
+
+		if (pep->idx != 0 && !(pep->ep_state & EP_WEDGE))
+			cdnsp_ring_doorbell_for_active_rings(pdev, pep);
+
+		pep->ep_state &= ~EP_WEDGE;
+	}
+
+	return 0;
+}
+
+static int cdnsp_update_eps_configuration(struct cdnsp_device *pdev,
+					  struct cdnsp_ep *pep)
+{
+	struct cdnsp_input_control_ctx *ctrl_ctx;
+	struct cdnsp_slot_ctx *slot_ctx;
+	int ret = 0;
+	u32 ep_sts;
+	int i;
+
+	ctrl_ctx = cdnsp_get_input_control_ctx(&pdev->in_ctx);
+
+	/* Don't issue the command if there's no endpoints to update. */
+	if (ctrl_ctx->add_flags == 0 && ctrl_ctx->drop_flags == 0)
+		return 0;
+
+	ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
+	ctrl_ctx->add_flags &= cpu_to_le32(~EP0_FLAG);
+	ctrl_ctx->drop_flags &= cpu_to_le32(~(SLOT_FLAG | EP0_FLAG));
+
+	/* Fix up Context Entries field. Minimum value is EP0 == BIT(1). */
+	slot_ctx = cdnsp_get_slot_ctx(&pdev->in_ctx);
+	for (i = CDNSP_ENDPOINTS_NUM; i >= 1; i--) {
+		__le32 le32 = cpu_to_le32(BIT(i));
+
+		if ((pdev->eps[i - 1].ring && !(ctrl_ctx->drop_flags & le32)) ||
+		    (ctrl_ctx->add_flags & le32) || i == 1) {
+			slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK);
+			slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(i));
+			break;
+		}
+	}
+
+	ep_sts = GET_EP_CTX_STATE(pep->out_ctx);
+
+	if ((ctrl_ctx->add_flags != cpu_to_le32(SLOT_FLAG) &&
+	     ep_sts == EP_STATE_DISABLED) ||
+	    (ep_sts != EP_STATE_DISABLED && ctrl_ctx->drop_flags))
+		ret = cdnsp_configure_endpoint(pdev);
+
+	trace_cdnsp_configure_endpoint(cdnsp_get_slot_ctx(&pdev->out_ctx));
+	trace_cdnsp_handle_cmd_config_ep(pep->out_ctx);
+
+	cdnsp_zero_in_ctx(pdev);
+
+	return ret;
+}
+
+/*
+ * This submits a Reset Device Command, which will set the device state to 0,
+ * set the device address to 0, and disable all the endpoints except the default
+ * control endpoint. The USB core should come back and call
+ * cdnsp_setup_device(), and then re-set up the configuration.
+ */
+int cdnsp_reset_device(struct cdnsp_device *pdev)
+{
+	struct cdnsp_slot_ctx *slot_ctx;
+	int slot_state;
+	int ret, i;
+
+	slot_ctx = cdnsp_get_slot_ctx(&pdev->in_ctx);
+	slot_ctx->dev_info = 0;
+	pdev->device_address = 0;
+
+	/* If device is not setup, there is no point in resetting it. */
+	slot_ctx = cdnsp_get_slot_ctx(&pdev->out_ctx);
+	slot_state = GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state));
+	trace_cdnsp_reset_device(slot_ctx);
+
+	if (slot_state <= SLOT_STATE_DEFAULT &&
+	    pdev->eps[0].ep_state & EP_HALTED) {
+		cdnsp_halt_endpoint(pdev, &pdev->eps[0], 0);
+	}
+
+	/*
+	 * During Reset Device command controller shall transition the
+	 * endpoint ep0 to the Running State.
+	 */
+	pdev->eps[0].ep_state &= ~(EP_STOPPED | EP_HALTED);
+	pdev->eps[0].ep_state |= EP_ENABLED;
+
+	if (slot_state <= SLOT_STATE_DEFAULT)
+		return 0;
+
+	cdnsp_queue_reset_device(pdev);
+	cdnsp_ring_cmd_db(pdev);
+	ret = cdnsp_wait_for_cmd_compl(pdev);
+
+	/*
+	 * After Reset Device command all not default endpoints
+	 * are in Disabled state.
+	 */
+	for (i = 1; i < CDNSP_ENDPOINTS_NUM; ++i)
+		pdev->eps[i].ep_state |= EP_STOPPED | EP_UNCONFIGURED;
+
+	trace_cdnsp_handle_cmd_reset_dev(slot_ctx);
+
+	if (ret)
+		dev_err(pdev->dev, "Reset device failed with error code %d",
+			ret);
+
+	return ret;
+}
+
+/*
+ * Sets the MaxPStreams field and the Linear Stream Array field.
+ * Sets the dequeue pointer to the stream context array.
+ */
+static void cdnsp_setup_streams_ep_input_ctx(struct cdnsp_device *pdev,
+					     struct cdnsp_ep_ctx *ep_ctx,
+					     struct cdnsp_stream_info *stream_info)
+{
+	u32 max_primary_streams;
+
+	/* MaxPStreams is the number of stream context array entries, not the
+	 * number we're actually using. Must be in 2^(MaxPstreams + 1) format.
+	 * fls(0) = 0, fls(0x1) = 1, fls(0x10) = 2, fls(0x100) = 3, etc.
+	 */
+	max_primary_streams = fls(stream_info->num_stream_ctxs) - 2;
+	ep_ctx->ep_info &= cpu_to_le32(~EP_MAXPSTREAMS_MASK);
+	ep_ctx->ep_info |= cpu_to_le32(EP_MAXPSTREAMS(max_primary_streams)
+				       | EP_HAS_LSA);
+	ep_ctx->deq  = cpu_to_le64(stream_info->ctx_array_dma);
+}
+
+/*
+ * The drivers use this function to prepare a bulk endpoints to use streams.
+ *
+ * Don't allow the call to succeed if endpoint only supports one stream
+ * (which means it doesn't support streams at all).
+ */
+int cdnsp_alloc_streams(struct cdnsp_device *pdev, struct cdnsp_ep *pep)
+{
+	unsigned int num_streams = usb_ss_max_streams(pep->endpoint.comp_desc);
+	unsigned int num_stream_ctxs;
+	int ret;
+
+	if (num_streams ==  0)
+		return 0;
+
+	if (num_streams > STREAM_NUM_STREAMS)
+		return -EINVAL;
+
+	/*
+	 * Add two to the number of streams requested to account for
+	 * stream 0 that is reserved for controller usage and one additional
+	 * for TASK SET FULL response.
+	 */
+	num_streams += 2;
+
+	/* The stream context array size must be a power of two */
+	num_stream_ctxs = roundup_pow_of_two(num_streams);
+
+	trace_cdnsp_stream_number(pep, num_stream_ctxs, num_streams);
+
+	ret = cdnsp_alloc_stream_info(pdev, pep, num_stream_ctxs, num_streams);
+	if (ret)
+		return ret;
+
+	cdnsp_setup_streams_ep_input_ctx(pdev, pep->in_ctx, &pep->stream_info);
+
+	pep->ep_state |= EP_HAS_STREAMS;
+	pep->stream_info.td_count = 0;
+	pep->stream_info.first_prime_det = 0;
+
+	/* Subtract 1 for stream 0, which drivers can't use. */
+	return num_streams - 1;
+}
+
+int cdnsp_disable_slot(struct cdnsp_device *pdev)
+{
+	int ret;
+
+	cdnsp_queue_slot_control(pdev, TRB_DISABLE_SLOT);
+	cdnsp_ring_cmd_db(pdev);
+	ret = cdnsp_wait_for_cmd_compl(pdev);
+
+	pdev->slot_id = 0;
+	pdev->active_port = NULL;
+
+	trace_cdnsp_handle_cmd_disable_slot(cdnsp_get_slot_ctx(&pdev->out_ctx));
+
+	memset(pdev->in_ctx.bytes, 0, CDNSP_CTX_SIZE);
+	memset(pdev->out_ctx.bytes, 0, CDNSP_CTX_SIZE);
+
+	return ret;
+}
+
+int cdnsp_enable_slot(struct cdnsp_device *pdev)
+{
+	struct cdnsp_slot_ctx *slot_ctx;
+	int slot_state;
+	int ret;
+
+	/* If device is not setup, there is no point in resetting it */
+	slot_ctx = cdnsp_get_slot_ctx(&pdev->out_ctx);
+	slot_state = GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state));
+
+	if (slot_state != SLOT_STATE_DISABLED)
+		return 0;
+
+	cdnsp_queue_slot_control(pdev, TRB_ENABLE_SLOT);
+	cdnsp_ring_cmd_db(pdev);
+	ret = cdnsp_wait_for_cmd_compl(pdev);
+	if (ret)
+		goto show_trace;
+
+	pdev->slot_id = 1;
+
+show_trace:
+	trace_cdnsp_handle_cmd_enable_slot(cdnsp_get_slot_ctx(&pdev->out_ctx));
+
+	return ret;
+}
+
+/*
+ * Issue an Address Device command with BSR=0 if setup is SETUP_CONTEXT_ONLY
+ * or with BSR = 1 if set_address is SETUP_CONTEXT_ADDRESS.
+ */
+int cdnsp_setup_device(struct cdnsp_device *pdev, enum cdnsp_setup_dev setup)
+{
+	struct cdnsp_input_control_ctx *ctrl_ctx;
+	struct cdnsp_slot_ctx *slot_ctx;
+	int dev_state = 0;
+	int ret;
+
+	if (!pdev->slot_id) {
+		trace_cdnsp_slot_id("incorrect");
+		return -EINVAL;
+	}
+
+	if (!pdev->active_port->port_num)
+		return -EINVAL;
+
+	slot_ctx = cdnsp_get_slot_ctx(&pdev->out_ctx);
+	dev_state = GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state));
+
+	if (setup == SETUP_CONTEXT_ONLY && dev_state == SLOT_STATE_DEFAULT) {
+		trace_cdnsp_slot_already_in_default(slot_ctx);
+		return 0;
+	}
+
+	slot_ctx = cdnsp_get_slot_ctx(&pdev->in_ctx);
+	ctrl_ctx = cdnsp_get_input_control_ctx(&pdev->in_ctx);
+
+	if (!slot_ctx->dev_info || dev_state == SLOT_STATE_DEFAULT) {
+		ret = cdnsp_setup_addressable_priv_dev(pdev);
+		if (ret)
+			return ret;
+	}
+
+	cdnsp_copy_ep0_dequeue_into_input_ctx(pdev);
+
+	ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
+	ctrl_ctx->drop_flags = 0;
+
+	trace_cdnsp_setup_device_slot(slot_ctx);
+
+	cdnsp_queue_address_device(pdev, pdev->in_ctx.dma, setup);
+	cdnsp_ring_cmd_db(pdev);
+	ret = cdnsp_wait_for_cmd_compl(pdev);
+
+	trace_cdnsp_handle_cmd_addr_dev(cdnsp_get_slot_ctx(&pdev->out_ctx));
+
+	/* Zero the input context control for later use. */
+	ctrl_ctx->add_flags = 0;
+	ctrl_ctx->drop_flags = 0;
+
+	return ret;
+}
+
+void cdnsp_set_usb2_hardware_lpm(struct cdnsp_device *pdev,
+				 struct usb_request *req,
+				 int enable)
+{
+	if (pdev->active_port == &pdev->usb3_port || !pdev->gadget.lpm_capable)
+		return;
+
+	trace_cdnsp_lpm(enable);
+
+	if (enable)
+		writel(PORT_BESL(CDNSP_DEFAULT_BESL) | PORT_L1S_NYET | PORT_HLE,
+		       &pdev->active_port->regs->portpmsc);
+	else
+		writel(PORT_L1S_NYET, &pdev->active_port->regs->portpmsc);
+}
+
+static int cdnsp_get_frame(struct cdnsp_device *pdev)
+{
+	return readl(&pdev->run_regs->microframe_index) >> 3;
+}
+
+static int cdnsp_gadget_ep_enable(struct usb_ep *ep,
+				  const struct usb_endpoint_descriptor *desc)
+{
+	struct cdnsp_input_control_ctx *ctrl_ctx;
+	struct cdnsp_device *pdev;
+	struct cdnsp_ep *pep;
+	unsigned long flags;
+	u32 added_ctxs;
+	int ret;
+
+	if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT ||
+	    !desc->wMaxPacketSize)
+		return -EINVAL;
+
+	pep = to_cdnsp_ep(ep);
+	pdev = pep->pdev;
+	pep->ep_state &= ~EP_UNCONFIGURED;
+
+	if (dev_WARN_ONCE(pdev->dev, pep->ep_state & EP_ENABLED,
+			  "%s is already enabled\n", pep->name))
+		return 0;
+
+	spin_lock_irqsave(&pdev->lock, flags);
+
+	added_ctxs = cdnsp_get_endpoint_flag(desc);
+	if (added_ctxs == SLOT_FLAG || added_ctxs == EP0_FLAG) {
+		dev_err(pdev->dev, "ERROR: Bad endpoint number\n");
+		ret = -EINVAL;
+		goto unlock;
+	}
+
+	pep->interval = desc->bInterval ? BIT(desc->bInterval - 1) : 0;
+
+	if (pdev->gadget.speed == USB_SPEED_FULL) {
+		if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_INT)
+			pep->interval = desc->bInterval << 3;
+		if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_ISOC)
+			pep->interval = BIT(desc->bInterval - 1) << 3;
+	}
+
+	if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_ISOC) {
+		if (pep->interval > BIT(12)) {
+			dev_err(pdev->dev, "bInterval %d not supported\n",
+				desc->bInterval);
+			ret = -EINVAL;
+			goto unlock;
+		}
+		cdnsp_set_chicken_bits_2(pdev, CHICKEN_XDMA_2_TP_CACHE_DIS);
+	}
+
+	ret = cdnsp_endpoint_init(pdev, pep, GFP_ATOMIC);
+	if (ret)
+		goto unlock;
+
+	ctrl_ctx = cdnsp_get_input_control_ctx(&pdev->in_ctx);
+	ctrl_ctx->add_flags = cpu_to_le32(added_ctxs);
+	ctrl_ctx->drop_flags = 0;
+
+	ret = cdnsp_update_eps_configuration(pdev, pep);
+	if (ret) {
+		cdnsp_free_endpoint_rings(pdev, pep);
+		goto unlock;
+	}
+
+	pep->ep_state |= EP_ENABLED;
+	pep->ep_state &= ~EP_STOPPED;
+
+unlock:
+	trace_cdnsp_ep_enable_end(pep, 0);
+	spin_unlock_irqrestore(&pdev->lock, flags);
+
+	return ret;
+}
+
+static int cdnsp_gadget_ep_disable(struct usb_ep *ep)
+{
+	struct cdnsp_input_control_ctx *ctrl_ctx;
+	struct cdnsp_request *preq;
+	struct cdnsp_device *pdev;
+	struct cdnsp_ep *pep;
+	unsigned long flags;
+	u32 drop_flag;
+	int ret = 0;
+
+	if (!ep)
+		return -EINVAL;
+
+	pep = to_cdnsp_ep(ep);
+	pdev = pep->pdev;
+
+	spin_lock_irqsave(&pdev->lock, flags);
+
+	if (!(pep->ep_state & EP_ENABLED)) {
+		dev_err(pdev->dev, "%s is already disabled\n", pep->name);
+		ret = -EINVAL;
+		goto finish;
+	}
+
+	pep->ep_state |= EP_DIS_IN_RROGRESS;
+
+	/* Endpoint was unconfigured by Reset Device command. */
+	if (!(pep->ep_state & EP_UNCONFIGURED))
+		cdnsp_cmd_stop_ep(pdev, pep);
+
+	/* Remove all queued USB requests. */
+	while (!list_empty(&pep->pending_list)) {
+		preq = next_request(&pep->pending_list);
+		cdnsp_ep_dequeue(pep, preq);
+	}
+
+	cdnsp_invalidate_ep_events(pdev, pep);
+
+	pep->ep_state &= ~EP_DIS_IN_RROGRESS;
+	drop_flag = cdnsp_get_endpoint_flag(pep->endpoint.desc);
+	ctrl_ctx = cdnsp_get_input_control_ctx(&pdev->in_ctx);
+	ctrl_ctx->drop_flags = cpu_to_le32(drop_flag);
+	ctrl_ctx->add_flags = 0;
+
+	cdnsp_endpoint_zero(pdev, pep);
+
+	if (!(pep->ep_state & EP_UNCONFIGURED))
+		ret = cdnsp_update_eps_configuration(pdev, pep);
+
+	cdnsp_free_endpoint_rings(pdev, pep);
+
+	pep->ep_state &= ~(EP_ENABLED | EP_UNCONFIGURED);
+	pep->ep_state |= EP_STOPPED;
+
+finish:
+	trace_cdnsp_ep_disable_end(pep, 0);
+	spin_unlock_irqrestore(&pdev->lock, flags);
+
+	return ret;
+}
+
+static struct usb_request *cdnsp_gadget_ep_alloc_request(struct usb_ep *ep,
+							 gfp_t gfp_flags)
+{
+	struct cdnsp_ep *pep = to_cdnsp_ep(ep);
+	struct cdnsp_request *preq;
+
+	preq = kzalloc_obj(*preq, gfp_flags);
+	if (!preq)
+		return NULL;
+
+	preq->epnum = pep->number;
+	preq->pep = pep;
+
+	trace_cdnsp_alloc_request(preq);
+
+	return &preq->request;
+}
+
+static void cdnsp_gadget_ep_free_request(struct usb_ep *ep,
+					 struct usb_request *request)
+{
+	struct cdnsp_request *preq = to_cdnsp_request(request);
+
+	trace_cdnsp_free_request(preq);
+	kfree(preq);
+}
+
+static int cdnsp_gadget_ep_queue(struct usb_ep *ep,
+				 struct usb_request *request,
+				 gfp_t gfp_flags)
+{
+	struct cdnsp_request *preq;
+	struct cdnsp_device *pdev;
+	struct cdnsp_ep *pep;
+	unsigned long flags;
+	int ret;
+
+	if (!request || !ep)
+		return -EINVAL;
+
+	pep = to_cdnsp_ep(ep);
+	pdev = pep->pdev;
+
+	if (!(pep->ep_state & EP_ENABLED)) {
+		dev_err(pdev->dev, "%s: can't queue to disabled endpoint\n",
+			pep->name);
+		return -EINVAL;
+	}
+
+	preq = to_cdnsp_request(request);
+	spin_lock_irqsave(&pdev->lock, flags);
+	ret = cdnsp_ep_enqueue(pep, preq);
+	spin_unlock_irqrestore(&pdev->lock, flags);
+
+	return ret;
+}
+
+static int cdnsp_gadget_ep_dequeue(struct usb_ep *ep,
+				   struct usb_request *request)
+{
+	struct cdnsp_ep *pep = to_cdnsp_ep(ep);
+	struct cdnsp_device *pdev = pep->pdev;
+	unsigned long flags;
+	int ret;
+
+	if (request->status != -EINPROGRESS)
+		return 0;
+
+	if (!pep->endpoint.desc) {
+		dev_err(pdev->dev,
+			"%s: can't dequeue to disabled endpoint\n",
+			pep->name);
+		return -ESHUTDOWN;
+	}
+
+	/* Requests has been dequeued during disabling endpoint. */
+	if (!(pep->ep_state & EP_ENABLED))
+		return 0;
+
+	spin_lock_irqsave(&pdev->lock, flags);
+	ret = cdnsp_ep_dequeue(pep, to_cdnsp_request(request));
+	spin_unlock_irqrestore(&pdev->lock, flags);
+
+	return ret;
+}
+
+static int cdnsp_gadget_ep_set_halt(struct usb_ep *ep, int value)
+{
+	struct cdnsp_ep *pep = to_cdnsp_ep(ep);
+	struct cdnsp_device *pdev = pep->pdev;
+	struct cdnsp_request *preq;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&pdev->lock, flags);
+
+	preq = next_request(&pep->pending_list);
+	if (value) {
+		if (preq) {
+			trace_cdnsp_ep_busy_try_halt_again(pep, 0);
+			ret = -EAGAIN;
+			goto done;
+		}
+	}
+
+	ret = cdnsp_halt_endpoint(pdev, pep, value);
+
+done:
+	spin_unlock_irqrestore(&pdev->lock, flags);
+	return ret;
+}
+
+static int cdnsp_gadget_ep_set_wedge(struct usb_ep *ep)
+{
+	struct cdnsp_ep *pep = to_cdnsp_ep(ep);
+	struct cdnsp_device *pdev = pep->pdev;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&pdev->lock, flags);
+	pep->ep_state |= EP_WEDGE;
+	ret = cdnsp_halt_endpoint(pdev, pep, 1);
+	spin_unlock_irqrestore(&pdev->lock, flags);
+
+	return ret;
+}
+
+static const struct usb_ep_ops cdnsp_gadget_ep0_ops = {
+	.enable		= cdnsp_gadget_ep_enable,
+	.disable	= cdnsp_gadget_ep_disable,
+	.alloc_request	= cdnsp_gadget_ep_alloc_request,
+	.free_request	= cdnsp_gadget_ep_free_request,
+	.queue		= cdnsp_gadget_ep_queue,
+	.dequeue	= cdnsp_gadget_ep_dequeue,
+	.set_halt	= cdnsp_gadget_ep_set_halt,
+	.set_wedge	= cdnsp_gadget_ep_set_wedge,
+};
+
+static const struct usb_ep_ops cdnsp_gadget_ep_ops = {
+	.enable		= cdnsp_gadget_ep_enable,
+	.disable	= cdnsp_gadget_ep_disable,
+	.alloc_request	= cdnsp_gadget_ep_alloc_request,
+	.free_request	= cdnsp_gadget_ep_free_request,
+	.queue		= cdnsp_gadget_ep_queue,
+	.dequeue	= cdnsp_gadget_ep_dequeue,
+	.set_halt	= cdnsp_gadget_ep_set_halt,
+	.set_wedge	= cdnsp_gadget_ep_set_wedge,
+};
+
+void cdnsp_gadget_giveback(struct cdnsp_ep *pep,
+			   struct cdnsp_request *preq,
+			   int status)
+{
+	struct cdnsp_device *pdev = pep->pdev;
+
+	list_del(&preq->list);
+
+	if (preq->request.status == -EINPROGRESS)
+		preq->request.status = status;
+
+	usb_gadget_unmap_request_by_dev(pdev->dev, &preq->request,
+					preq->direction);
+
+	trace_cdnsp_request_giveback(preq);
+
+	if (preq != &pdev->ep0_preq) {
+		spin_unlock(&pdev->lock);
+		usb_gadget_giveback_request(&pep->endpoint, &preq->request);
+		spin_lock(&pdev->lock);
+	}
+}
+
+static struct usb_endpoint_descriptor cdnsp_gadget_ep0_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bmAttributes =		USB_ENDPOINT_XFER_CONTROL,
+};
+
+static int cdnsp_run(struct cdnsp_device *pdev,
+		     enum usb_device_speed speed)
+{
+	u32 fs_speed = 0;
+	u32 temp;
+	int ret;
+
+	temp = readl(&pdev->ir_set->irq_control);
+	temp &= ~IMOD_INTERVAL_MASK;
+	temp |= ((IMOD_DEFAULT_INTERVAL / 250) & IMOD_INTERVAL_MASK);
+	writel(temp, &pdev->ir_set->irq_control);
+
+	temp = readl(&pdev->port3x_regs->mode_addr);
+
+	switch (speed) {
+	case USB_SPEED_SUPER_PLUS:
+		temp |= CFG_3XPORT_SSP_SUPPORT;
+		break;
+	case USB_SPEED_SUPER:
+		temp &= ~CFG_3XPORT_SSP_SUPPORT;
+		break;
+	case USB_SPEED_HIGH:
+		break;
+	case USB_SPEED_FULL:
+		fs_speed = PORT_REG6_FORCE_FS;
+		break;
+	default:
+		dev_err(pdev->dev, "invalid maximum_speed parameter %d\n",
+			speed);
+		fallthrough;
+	case USB_SPEED_UNKNOWN:
+		/* Default to superspeed. */
+		speed = USB_SPEED_SUPER;
+		break;
+	}
+
+	if (pdev->usb3_port.exist && speed >= USB_SPEED_SUPER) {
+		writel(temp, &pdev->port3x_regs->mode_addr);
+		cdnsp_set_link_state(pdev, &pdev->usb3_port.regs->portsc,
+				     XDEV_RXDETECT);
+	} else {
+		cdnsp_disable_port(pdev, &pdev->usb3_port);
+	}
+
+	if (pdev->usb2_port.exist) {
+		cdnsp_set_link_state(pdev, &pdev->usb2_port.regs->portsc,
+				     XDEV_RXDETECT);
+		writel(PORT_REG6_L1_L0_HW_EN | fs_speed, &pdev->port20_regs->port_reg6);
+	}
+
+	if (pdev->eusb_port.exist)
+		cdnsp_set_link_state(pdev, &pdev->eusb_port.regs->portsc,
+				     XDEV_RXDETECT);
+
+	cdnsp_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
+
+
+	ret = cdnsp_start(pdev);
+	if (ret) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	temp = readl(&pdev->op_regs->command);
+	temp |= (CMD_INTE);
+	writel(temp, &pdev->op_regs->command);
+
+	temp = readl(&pdev->ir_set->irq_pending);
+	writel(IMAN_IE_SET(temp), &pdev->ir_set->irq_pending);
+
+	trace_cdnsp_init("Controller ready to work");
+	return 0;
+err:
+	cdnsp_halt(pdev);
+	return ret;
+}
+
+static int cdnsp_gadget_udc_start(struct usb_gadget *g,
+				  struct usb_gadget_driver *driver)
+{
+	enum usb_device_speed max_speed = driver->max_speed;
+	struct cdnsp_device *pdev = gadget_to_cdnsp(g);
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&pdev->lock, flags);
+	pdev->gadget_driver = driver;
+
+	/* limit speed if necessary */
+	max_speed = min(driver->max_speed, g->max_speed);
+	ret = cdnsp_run(pdev, max_speed);
+
+	spin_unlock_irqrestore(&pdev->lock, flags);
+
+	return ret;
+}
+
+/*
+ * Update Event Ring Dequeue Pointer:
+ * - When all events have finished
+ * - To avoid "Event Ring Full Error" condition
+ */
+void cdnsp_update_erst_dequeue(struct cdnsp_device *pdev,
+			       union cdnsp_trb *event_ring_deq,
+			       u8 clear_ehb)
+{
+	u64 temp_64;
+	dma_addr_t deq;
+
+	temp_64 = cdnsp_read_64(&pdev->ir_set->erst_dequeue);
+
+	/* If necessary, update the HW's version of the event ring deq ptr. */
+	if (event_ring_deq != pdev->event_ring->dequeue) {
+		deq = cdnsp_trb_virt_to_dma(pdev->event_ring->deq_seg,
+					    pdev->event_ring->dequeue);
+		temp_64 &= ERST_PTR_MASK;
+		temp_64 |= ((u64)deq & (u64)~ERST_PTR_MASK);
+	}
+
+	/* Clear the event handler busy flag (RW1C). */
+	if (clear_ehb)
+		temp_64 |= ERST_EHB;
+	else
+		temp_64 &= ~ERST_EHB;
+
+	cdnsp_write_64(temp_64, &pdev->ir_set->erst_dequeue);
+}
+
+static void cdnsp_clear_cmd_ring(struct cdnsp_device *pdev)
+{
+	struct cdnsp_segment *seg;
+	u64 val_64;
+	int i;
+
+	cdnsp_initialize_ring_info(pdev->cmd_ring);
+
+	seg = pdev->cmd_ring->first_seg;
+	for (i = 0; i < pdev->cmd_ring->num_segs; i++) {
+		memset(seg->trbs, 0,
+		       sizeof(union cdnsp_trb) * (TRBS_PER_SEGMENT - 1));
+		seg = seg->next;
+	}
+
+	/* Set the address in the Command Ring Control register. */
+	val_64 = cdnsp_read_64(&pdev->op_regs->cmd_ring);
+	val_64 = (val_64 & (u64)CMD_RING_RSVD_BITS) |
+		 (pdev->cmd_ring->first_seg->dma & (u64)~CMD_RING_RSVD_BITS) |
+		 pdev->cmd_ring->cycle_state;
+	cdnsp_write_64(val_64, &pdev->op_regs->cmd_ring);
+}
+
+static void cdnsp_consume_all_events(struct cdnsp_device *pdev)
+{
+	struct cdnsp_segment *event_deq_seg;
+	union cdnsp_trb *event_ring_deq;
+	union cdnsp_trb *event;
+	u32 cycle_bit;
+
+	event_ring_deq = pdev->event_ring->dequeue;
+	event_deq_seg = pdev->event_ring->deq_seg;
+	event = pdev->event_ring->dequeue;
+
+	/* Update ring dequeue pointer. */
+	while (1) {
+		cycle_bit = (le32_to_cpu(event->event_cmd.flags) & TRB_CYCLE);
+
+		/* Does the controller or driver own the TRB? */
+		if (cycle_bit != pdev->event_ring->cycle_state)
+			break;
+
+		cdnsp_inc_deq(pdev, pdev->event_ring);
+
+		if (!cdnsp_last_trb_on_seg(event_deq_seg, event)) {
+			event++;
+			continue;
+		}
+
+		if (cdnsp_last_trb_on_ring(pdev->event_ring, event_deq_seg,
+					   event))
+			cycle_bit ^= 1;
+
+		event_deq_seg = event_deq_seg->next;
+		event = event_deq_seg->trbs;
+	}
+
+	cdnsp_update_erst_dequeue(pdev,  event_ring_deq, 1);
+}
+
+static void cdnsp_stop(struct cdnsp_device *pdev)
+{
+	u32 temp;
+
+	/* Remove internally queued request for ep0. */
+	if (!list_empty(&pdev->eps[0].pending_list)) {
+		struct cdnsp_request *req;
+
+		req = next_request(&pdev->eps[0].pending_list);
+		if (req == &pdev->ep0_preq)
+			cdnsp_ep_dequeue(&pdev->eps[0], req);
+	}
+
+	cdnsp_disable_port(pdev, &pdev->usb2_port);
+	cdnsp_disable_port(pdev, &pdev->usb3_port);
+	cdnsp_disable_port(pdev, &pdev->eusb_port);
+
+	cdnsp_disable_slot(pdev);
+	cdnsp_halt(pdev);
+
+	temp = readl(&pdev->op_regs->status);
+	writel((temp & ~0x1fff) | STS_EINT, &pdev->op_regs->status);
+	temp = readl(&pdev->ir_set->irq_pending);
+	writel(IMAN_IE_CLEAR(temp), &pdev->ir_set->irq_pending);
+
+	cdnsp_clear_port_change_bit(pdev, &pdev->usb2_port);
+	cdnsp_clear_port_change_bit(pdev, &pdev->eusb_port);
+	cdnsp_clear_port_change_bit(pdev, &pdev->usb3_port);
+
+	/* Clear interrupt line */
+	temp = readl(&pdev->ir_set->irq_pending);
+	temp |= IMAN_IP;
+	writel(temp, &pdev->ir_set->irq_pending);
+
+	cdnsp_consume_all_events(pdev);
+	cdnsp_clear_cmd_ring(pdev);
+
+	trace_cdnsp_exit("Controller stopped.");
+}
+
+/*
+ * Stop controller.
+ * This function is called by the gadget core when the driver is removed.
+ * Disable slot, disable IRQs, and quiesce the controller.
+ */
+static int cdnsp_gadget_udc_stop(struct usb_gadget *g)
+{
+	struct cdnsp_device *pdev = gadget_to_cdnsp(g);
+	unsigned long flags;
+
+	spin_lock_irqsave(&pdev->lock, flags);
+	cdnsp_stop(pdev);
+	pdev->gadget_driver = NULL;
+	spin_unlock_irqrestore(&pdev->lock, flags);
+
+	return 0;
+}
+
+static int cdnsp_gadget_get_frame(struct usb_gadget *g)
+{
+	struct cdnsp_device *pdev = gadget_to_cdnsp(g);
+
+	return cdnsp_get_frame(pdev);
+}
+
+static void __cdnsp_gadget_wakeup(struct cdnsp_device *pdev)
+{
+	struct cdnsp_port_regs __iomem *port_regs;
+	u32 portpm, portsc;
+
+	port_regs = pdev->active_port->regs;
+	portsc = readl(&port_regs->portsc) & PORT_PLS_MASK;
+
+	/* Remote wakeup feature is not enabled by host. */
+	if (pdev->gadget.speed < USB_SPEED_SUPER && portsc == XDEV_U2) {
+		portpm = readl(&port_regs->portpmsc);
+
+		if (!(portpm & PORT_RWE))
+			return;
+	}
+
+	if (portsc == XDEV_U3 && !pdev->may_wakeup)
+		return;
+
+	cdnsp_set_link_state(pdev, &port_regs->portsc, XDEV_U0);
+
+	pdev->cdnsp_state |= CDNSP_WAKEUP_PENDING;
+}
+
+static int cdnsp_gadget_wakeup(struct usb_gadget *g)
+{
+	struct cdnsp_device *pdev = gadget_to_cdnsp(g);
+	unsigned long flags;
+
+	spin_lock_irqsave(&pdev->lock, flags);
+	__cdnsp_gadget_wakeup(pdev);
+	spin_unlock_irqrestore(&pdev->lock, flags);
+
+	return 0;
+}
+
+static int cdnsp_gadget_set_selfpowered(struct usb_gadget *g,
+					int is_selfpowered)
+{
+	struct cdnsp_device *pdev = gadget_to_cdnsp(g);
+	unsigned long flags;
+
+	spin_lock_irqsave(&pdev->lock, flags);
+	g->is_selfpowered = !!is_selfpowered;
+	spin_unlock_irqrestore(&pdev->lock, flags);
+
+	return 0;
+}
+
+static int cdnsp_gadget_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct cdnsp_device *pdev = gadget_to_cdnsp(gadget);
+	struct cdns *cdns = dev_get_drvdata(pdev->dev);
+	unsigned long flags;
+
+	trace_cdnsp_pullup(is_on);
+
+	/*
+	 * Disable events handling while controller is being
+	 * enabled/disabled.
+	 */
+	disable_irq(cdns->dev_irq);
+	spin_lock_irqsave(&pdev->lock, flags);
+
+	if (!is_on) {
+		cdnsp_reset_device(pdev);
+		cdns_clear_vbus(cdns);
+	} else {
+		cdns_set_vbus(cdns);
+	}
+
+	spin_unlock_irqrestore(&pdev->lock, flags);
+	enable_irq(cdns->dev_irq);
+
+	return 0;
+}
+
+static const struct usb_gadget_ops cdnsp_gadget_ops = {
+	.get_frame		= cdnsp_gadget_get_frame,
+	.wakeup			= cdnsp_gadget_wakeup,
+	.set_selfpowered	= cdnsp_gadget_set_selfpowered,
+	.pullup			= cdnsp_gadget_pullup,
+	.udc_start		= cdnsp_gadget_udc_start,
+	.udc_stop		= cdnsp_gadget_udc_stop,
+};
+
+static void cdnsp_get_ep_buffering(struct cdnsp_device *pdev,
+				   struct cdnsp_ep *pep)
+{
+	void __iomem *reg = &pdev->cap_regs->hc_capbase;
+	int endpoints;
+
+	reg += cdnsp_find_next_ext_cap(reg, 0, XBUF_CAP_ID);
+
+	if (!pep->direction) {
+		pep->buffering = readl(reg + XBUF_RX_TAG_MASK_0_OFFSET);
+		pep->buffering_period = readl(reg + XBUF_RX_TAG_MASK_1_OFFSET);
+		pep->buffering = (pep->buffering + 1) / 2;
+		pep->buffering_period = (pep->buffering_period + 1) / 2;
+		return;
+	}
+
+	endpoints = HCS_ENDPOINTS(pdev->hcs_params1) / 2;
+
+	/* Set to XBUF_TX_TAG_MASK_0 register. */
+	reg += XBUF_TX_CMD_OFFSET + (endpoints * 2 + 2) * sizeof(u32);
+	/* Set reg to XBUF_TX_TAG_MASK_N related with this endpoint. */
+	reg += pep->number * sizeof(u32) * 2;
+
+	pep->buffering = (readl(reg) + 1) / 2;
+	pep->buffering_period = pep->buffering;
+}
+
+static int cdnsp_gadget_init_endpoints(struct cdnsp_device *pdev)
+{
+	int max_streams = HCC_MAX_PSA(pdev->hcc_params);
+	struct cdnsp_ep *pep;
+	int i;
+
+	INIT_LIST_HEAD(&pdev->gadget.ep_list);
+
+	if (max_streams < STREAM_LOG_STREAMS) {
+		dev_err(pdev->dev, "Stream size %d not supported\n",
+			max_streams);
+		return -EINVAL;
+	}
+
+	max_streams = STREAM_LOG_STREAMS;
+
+	for (i = 0; i < CDNSP_ENDPOINTS_NUM; i++) {
+		bool direction = !(i & 1); /* Start from OUT endpoint. */
+		u8 epnum = ((i + 1) >> 1);
+
+		if (!CDNSP_IF_EP_EXIST(pdev, epnum, direction))
+			continue;
+
+		pep = &pdev->eps[i];
+		pep->pdev = pdev;
+		pep->number = epnum;
+		pep->direction = direction; /* 0 for OUT, 1 for IN. */
+
+		/*
+		 * Ep0 is bidirectional, so ep0in and ep0out are represented by
+		 * pdev->eps[0]
+		 */
+		if (epnum == 0) {
+			snprintf(pep->name, sizeof(pep->name), "ep%d%s",
+				 epnum, "BiDir");
+
+			pep->idx = 0;
+			usb_ep_set_maxpacket_limit(&pep->endpoint, 512);
+			pep->endpoint.maxburst = 1;
+			pep->endpoint.ops = &cdnsp_gadget_ep0_ops;
+			pep->endpoint.desc = &cdnsp_gadget_ep0_desc;
+			pep->endpoint.comp_desc = NULL;
+			pep->endpoint.caps.type_control = true;
+			pep->endpoint.caps.dir_in = true;
+			pep->endpoint.caps.dir_out = true;
+
+			pdev->ep0_preq.epnum = pep->number;
+			pdev->ep0_preq.pep = pep;
+			pdev->gadget.ep0 = &pep->endpoint;
+		} else {
+			snprintf(pep->name, sizeof(pep->name), "ep%d%s",
+				 epnum, (pep->direction) ? "in" : "out");
+
+			pep->idx =  (epnum * 2 + (direction ? 1 : 0)) - 1;
+			usb_ep_set_maxpacket_limit(&pep->endpoint, 1024);
+
+			pep->endpoint.max_streams = max_streams;
+			pep->endpoint.ops = &cdnsp_gadget_ep_ops;
+			list_add_tail(&pep->endpoint.ep_list,
+				      &pdev->gadget.ep_list);
+
+			pep->endpoint.caps.type_iso = true;
+			pep->endpoint.caps.type_bulk = true;
+			pep->endpoint.caps.type_int = true;
+
+			pep->endpoint.caps.dir_in = direction;
+			pep->endpoint.caps.dir_out = !direction;
+		}
+
+		pep->endpoint.name = pep->name;
+		pep->in_ctx = cdnsp_get_ep_ctx(&pdev->in_ctx, pep->idx);
+		pep->out_ctx = cdnsp_get_ep_ctx(&pdev->out_ctx, pep->idx);
+		cdnsp_get_ep_buffering(pdev, pep);
+
+		dev_dbg(pdev->dev, "Init %s, MPS: %04x SupType: "
+			"CTRL: %s, INT: %s, BULK: %s, ISOC %s, "
+			"SupDir IN: %s, OUT: %s\n",
+			pep->name, 1024,
+			str_yes_no(pep->endpoint.caps.type_control),
+			str_yes_no(pep->endpoint.caps.type_int),
+			str_yes_no(pep->endpoint.caps.type_bulk),
+			str_yes_no(pep->endpoint.caps.type_iso),
+			str_yes_no(pep->endpoint.caps.dir_in),
+			str_yes_no(pep->endpoint.caps.dir_out));
+
+		INIT_LIST_HEAD(&pep->pending_list);
+	}
+
+	return 0;
+}
+
+static void cdnsp_gadget_free_endpoints(struct cdnsp_device *pdev)
+{
+	struct cdnsp_ep *pep;
+	int i;
+
+	for (i = 0; i < CDNSP_ENDPOINTS_NUM; i++) {
+		pep = &pdev->eps[i];
+		if (pep->number != 0 && pep->out_ctx)
+			list_del(&pep->endpoint.ep_list);
+	}
+}
+
+void cdnsp_disconnect_gadget(struct cdnsp_device *pdev)
+{
+	pdev->cdnsp_state |= CDNSP_STATE_DISCONNECT_PENDING;
+
+	if (pdev->gadget_driver && pdev->gadget_driver->disconnect) {
+		spin_unlock(&pdev->lock);
+		pdev->gadget_driver->disconnect(&pdev->gadget);
+		spin_lock(&pdev->lock);
+	}
+
+	pdev->gadget.speed = USB_SPEED_UNKNOWN;
+	usb_gadget_set_state(&pdev->gadget, USB_STATE_NOTATTACHED);
+
+	pdev->cdnsp_state &= ~CDNSP_STATE_DISCONNECT_PENDING;
+}
+
+void cdnsp_suspend_gadget(struct cdnsp_device *pdev)
+{
+	if (pdev->gadget_driver && pdev->gadget_driver->suspend) {
+		spin_unlock(&pdev->lock);
+		pdev->gadget_driver->suspend(&pdev->gadget);
+		spin_lock(&pdev->lock);
+	}
+}
+
+void cdnsp_resume_gadget(struct cdnsp_device *pdev)
+{
+	if (pdev->gadget_driver && pdev->gadget_driver->resume) {
+		spin_unlock(&pdev->lock);
+		pdev->gadget_driver->resume(&pdev->gadget);
+		spin_lock(&pdev->lock);
+	}
+}
+
+void cdnsp_irq_reset(struct cdnsp_device *pdev)
+{
+	struct cdnsp_port_regs __iomem *port_regs;
+
+	cdnsp_reset_device(pdev);
+
+	port_regs = pdev->active_port->regs;
+	pdev->gadget.speed = cdnsp_port_speed(readl(port_regs));
+
+	spin_unlock(&pdev->lock);
+	usb_gadget_udc_reset(&pdev->gadget, pdev->gadget_driver);
+	spin_lock(&pdev->lock);
+
+	switch (pdev->gadget.speed) {
+	case USB_SPEED_SUPER_PLUS:
+	case USB_SPEED_SUPER:
+		cdnsp_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
+		pdev->gadget.ep0->maxpacket = 512;
+		break;
+	case USB_SPEED_HIGH:
+	case USB_SPEED_FULL:
+		cdnsp_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
+		pdev->gadget.ep0->maxpacket = 64;
+		break;
+	default:
+		/* Low speed is not supported. */
+		dev_err(pdev->dev, "Unknown device speed\n");
+		break;
+	}
+
+	cdnsp_clear_chicken_bits_2(pdev, CHICKEN_XDMA_2_TP_CACHE_DIS);
+	cdnsp_setup_device(pdev, SETUP_CONTEXT_ONLY);
+	usb_gadget_set_state(&pdev->gadget, USB_STATE_DEFAULT);
+}
+
+static void cdnsp_get_rev_cap(struct cdnsp_device *pdev)
+{
+	void __iomem *reg = &pdev->cap_regs->hc_capbase;
+
+	reg += cdnsp_find_next_ext_cap(reg, 0, RTL_REV_CAP);
+	pdev->rev_cap  = reg;
+
+	pdev->rtl_revision = readl(&pdev->rev_cap->rtl_revision);
+
+	dev_info(pdev->dev, "Rev: %08x/%08x, eps: %08x, buff: %08x/%08x\n",
+		 readl(&pdev->rev_cap->ctrl_revision),
+		 readl(&pdev->rev_cap->rtl_revision),
+		 readl(&pdev->rev_cap->ep_supported),
+		 readl(&pdev->rev_cap->rx_buff_size),
+		 readl(&pdev->rev_cap->tx_buff_size));
+}
+
+static int cdnsp_gen_setup(struct cdnsp_device *pdev)
+{
+	int ret;
+	u32 reg;
+
+	pdev->cap_regs = pdev->regs;
+	pdev->op_regs = pdev->regs +
+		HC_LENGTH(readl(&pdev->cap_regs->hc_capbase));
+	pdev->run_regs = pdev->regs +
+		(readl(&pdev->cap_regs->run_regs_off) & RTSOFF_MASK);
+
+	/* Cache read-only capability registers */
+	pdev->hcs_params1 = readl(&pdev->cap_regs->hcs_params1);
+	pdev->hcc_params = readl(&pdev->cap_regs->hc_capbase);
+	pdev->hci_version = HC_VERSION(pdev->hcc_params);
+	pdev->hcc_params = readl(&pdev->cap_regs->hcc_params);
+
+	/*
+	 * Override the APB timeout value to give the controller more time for
+	 * enabling UTMI clock and synchronizing APB and UTMI clock domains.
+	 * This fix is platform specific and is required to fixes issue with
+	 * reading incorrect value from PORTSC register after resuming
+	 * from L1 state.
+	 */
+	cdnsp_set_apb_timeout_value(pdev);
+
+	cdnsp_get_rev_cap(pdev);
+
+	/* Make sure the Device Controller is halted. */
+	ret = cdnsp_halt(pdev);
+	if (ret)
+		return ret;
+
+	/* Reset the internal controller memory state and registers. */
+	ret = cdnsp_reset(pdev);
+	if (ret)
+		return ret;
+
+	/*
+	 * Set dma_mask and coherent_dma_mask to 64-bits,
+	 * if controller supports 64-bit addressing.
+	 */
+	if (HCC_64BIT_ADDR(pdev->hcc_params) &&
+	    !dma_set_mask(pdev->dev, DMA_BIT_MASK(64))) {
+		dev_dbg(pdev->dev, "Enabling 64-bit DMA addresses.\n");
+		dma_set_coherent_mask(pdev->dev, DMA_BIT_MASK(64));
+	} else {
+		/*
+		 * This is to avoid error in cases where a 32-bit USB
+		 * controller is used on a 64-bit capable system.
+		 */
+		ret = dma_set_mask(pdev->dev, DMA_BIT_MASK(32));
+		if (ret)
+			return ret;
+
+		dev_dbg(pdev->dev, "Enabling 32-bit DMA addresses.\n");
+		dma_set_coherent_mask(pdev->dev, DMA_BIT_MASK(32));
+	}
+
+	spin_lock_init(&pdev->lock);
+
+	ret = cdnsp_mem_init(pdev);
+	if (ret)
+		return ret;
+
+	/*
+	 * Software workaround for U1: after transition
+	 * to U1 the controller starts gating clock, and in some cases,
+	 * it causes that controller stack.
+	 */
+	reg = readl(&pdev->port3x_regs->mode_2);
+	reg &= ~CFG_3XPORT_U1_PIPE_CLK_GATE_EN;
+	writel(reg, &pdev->port3x_regs->mode_2);
+
+	return 0;
+}
+
+static int __cdnsp_gadget_init(struct cdns *cdns)
+{
+	struct cdnsp_device *pdev;
+	u32 max_speed;
+	int ret = -ENOMEM;
+
+	cdns_drd_gadget_on(cdns);
+
+	pdev = kzalloc_obj(*pdev);
+	if (!pdev)
+		return -ENOMEM;
+
+	pm_runtime_get_sync(cdns->dev);
+
+	cdns->gadget_dev = pdev;
+	pdev->dev = cdns->dev;
+	pdev->regs = cdns->dev_regs;
+	max_speed = usb_get_maximum_speed(cdns->dev);
+
+	switch (max_speed) {
+	case USB_SPEED_FULL:
+	case USB_SPEED_HIGH:
+	case USB_SPEED_SUPER:
+	case USB_SPEED_SUPER_PLUS:
+		break;
+	default:
+		dev_err(cdns->dev, "invalid speed parameter %d\n", max_speed);
+		fallthrough;
+	case USB_SPEED_UNKNOWN:
+		/* Default to SSP */
+		max_speed = USB_SPEED_SUPER_PLUS;
+		break;
+	}
+
+	pdev->gadget.ops = &cdnsp_gadget_ops;
+	pdev->gadget.name = "cdnsp-gadget";
+	pdev->gadget.speed = USB_SPEED_UNKNOWN;
+	pdev->gadget.sg_supported = 1;
+	pdev->gadget.max_speed = max_speed;
+	pdev->gadget.lpm_capable = 1;
+
+	pdev->setup_buf = kzalloc(CDNSP_EP0_SETUP_SIZE, GFP_KERNEL);
+	if (!pdev->setup_buf)
+		goto free_pdev;
+
+	/*
+	 * Controller supports not aligned buffer but it should improve
+	 * performance.
+	 */
+	pdev->gadget.quirk_ep_out_aligned_size = true;
+
+	ret = cdnsp_gen_setup(pdev);
+	if (ret) {
+		dev_err(pdev->dev, "Generic initialization failed %d\n", ret);
+		goto free_setup;
+	}
+
+	ret = cdnsp_gadget_init_endpoints(pdev);
+	if (ret) {
+		dev_err(pdev->dev, "failed to initialize endpoints\n");
+		goto halt_pdev;
+	}
+
+	ret = usb_add_gadget_udc(pdev->dev, &pdev->gadget);
+	if (ret) {
+		dev_err(pdev->dev, "failed to register udc\n");
+		goto free_endpoints;
+	}
+
+	ret = devm_request_threaded_irq(pdev->dev, cdns->dev_irq,
+					cdnsp_irq_handler,
+					cdnsp_thread_irq_handler, IRQF_SHARED,
+					dev_name(pdev->dev), pdev);
+	if (ret)
+		goto del_gadget;
+
+	return 0;
+
+del_gadget:
+	usb_del_gadget(&pdev->gadget);
+	cdnsp_gadget_free_endpoints(pdev);
+	usb_put_gadget(&pdev->gadget);
+	goto halt_pdev;
+free_endpoints:
+	cdnsp_gadget_free_endpoints(pdev);
+halt_pdev:
+	cdnsp_halt(pdev);
+	cdnsp_reset(pdev);
+	cdnsp_mem_cleanup(pdev);
+free_setup:
+	kfree(pdev->setup_buf);
+free_pdev:
+	kfree(pdev);
+
+	return ret;
+}
+
+static void cdnsp_gadget_exit(struct cdns *cdns)
+{
+	struct cdnsp_device *pdev = cdns->gadget_dev;
+
+	devm_free_irq(pdev->dev, cdns->dev_irq, pdev);
+	pm_runtime_put_autosuspend(cdns->dev);
+	usb_del_gadget(&pdev->gadget);
+	cdnsp_gadget_free_endpoints(pdev);
+	usb_put_gadget(&pdev->gadget);
+	cdnsp_mem_cleanup(pdev);
+	kfree(pdev);
+	cdns->gadget_dev = NULL;
+	cdns_drd_gadget_off(cdns);
+}
+
+static int cdnsp_gadget_suspend(struct cdns *cdns, bool do_wakeup)
+{
+	struct cdnsp_device *pdev = cdns->gadget_dev;
+	unsigned long flags;
+
+	if (pdev->link_state == XDEV_U3)
+		return 0;
+
+	spin_lock_irqsave(&pdev->lock, flags);
+	cdnsp_disconnect_gadget(pdev);
+	cdnsp_stop(pdev);
+	spin_unlock_irqrestore(&pdev->lock, flags);
+
+	return 0;
+}
+
+static int cdnsp_gadget_resume(struct cdns *cdns, bool lost_power)
+{
+	struct cdnsp_device *pdev = cdns->gadget_dev;
+	enum usb_device_speed max_speed;
+	unsigned long flags;
+	int ret;
+
+	if (!pdev->gadget_driver)
+		return 0;
+
+	spin_lock_irqsave(&pdev->lock, flags);
+	max_speed = pdev->gadget_driver->max_speed;
+
+	/* Limit speed if necessary. */
+	max_speed = min(max_speed, pdev->gadget.max_speed);
+
+	ret = cdnsp_run(pdev, max_speed);
+
+	if (pdev->link_state == XDEV_U3)
+		__cdnsp_gadget_wakeup(pdev);
+
+	spin_unlock_irqrestore(&pdev->lock, flags);
+
+	return ret;
+}
+
+/**
+ * cdnsp_gadget_init - initialize device structure
+ * @cdns: cdnsp instance
+ *
+ * This function initializes the gadget.
+ */
+int cdnsp_gadget_init(struct cdns *cdns)
+{
+	struct cdns_role_driver *rdrv;
+
+	rdrv = devm_kzalloc(cdns->dev, sizeof(*rdrv), GFP_KERNEL);
+	if (!rdrv)
+		return -ENOMEM;
+
+	rdrv->start	= __cdnsp_gadget_init;
+	rdrv->stop	= cdnsp_gadget_exit;
+	rdrv->suspend	= cdnsp_gadget_suspend;
+	rdrv->resume	= cdnsp_gadget_resume;
+	rdrv->state	= CDNS_ROLE_STATE_INACTIVE;
+	rdrv->name	= "gadget";
+	cdns->roles[USB_ROLE_DEVICE] = rdrv;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cdnsp_gadget_init);
diff --git a/drivers/usb/cdns3/cdnsp-gadget.h b/drivers/usb/cdns3/cdnsp-gadget.h
new file mode 100644
index 000000000..c44bca348
--- /dev/null
+++ b/drivers/usb/cdns3/cdnsp-gadget.h
@@ -0,0 +1,1617 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Cadence CDNSP DRD Driver.
+ *
+ * Copyright (C) 2020 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ *
+ * Code based on Linux XHCI driver.
+ * Origin: Copyright (C) 2008 Intel Corp.
+ */
+#ifndef __LINUX_CDNSP_GADGET_H
+#define __LINUX_CDNSP_GADGET_H
+
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/usb/gadget.h>
+#include <linux/irq.h>
+
+/* Max number slots - only 1 is allowed. */
+#define CDNSP_DEV_MAX_SLOTS	1
+
+#define CDNSP_EP0_SETUP_SIZE	512
+
+/* One control and 15 for in and 15 for out endpoints. */
+#define CDNSP_ENDPOINTS_NUM	31
+
+/* Best Effort Service Latency. */
+#define CDNSP_DEFAULT_BESL	0
+
+/* Device Controller command default timeout value in us */
+#define CDNSP_CMD_TIMEOUT	(15 * 1000)
+
+/* Up to 16 ms to halt an device controller */
+#define CDNSP_MAX_HALT_USEC	(16 * 1000)
+
+#define CDNSP_CTX_SIZE	2112
+
+/*
+ * Controller register interface.
+ */
+
+/**
+ * struct cdnsp_cap_regs - CDNSP Registers.
+ * @hc_capbase:	Length of the capabilities register and controller
+ *              version number
+ * @hcs_params1: HCSPARAMS1 - Structural Parameters 1
+ * @hcs_params2: HCSPARAMS2 - Structural Parameters 2
+ * @hcs_params3: HCSPARAMS3 - Structural Parameters 3
+ * @hcc_params: HCCPARAMS - Capability Parameters
+ * @db_off: DBOFF - Doorbell array offset
+ * @run_regs_off: RTSOFF - Runtime register space offset
+ * @hcc_params2: HCCPARAMS2 Capability Parameters 2,
+ */
+struct cdnsp_cap_regs {
+	__le32 hc_capbase;
+	__le32 hcs_params1;
+	__le32 hcs_params2;
+	__le32 hcs_params3;
+	__le32 hcc_params;
+	__le32 db_off;
+	__le32 run_regs_off;
+	__le32 hcc_params2;
+	/* Reserved up to (CAPLENGTH - 0x1C) */
+};
+
+/* hc_capbase bitmasks. */
+/* bits 7:0 - how long is the Capabilities register. */
+#define HC_LENGTH(p)		(((p) >> 00) & GENMASK(7, 0))
+/* bits 31:16	*/
+#define HC_VERSION(p)		(((p) >> 16) & GENMASK(15, 1))
+
+/* HCSPARAMS1 - hcs_params1 - bitmasks */
+/* bits 0:7, Max Device Endpoints */
+#define HCS_ENDPOINTS_MASK	GENMASK(7, 0)
+#define HCS_ENDPOINTS(p)	(((p) & HCS_ENDPOINTS_MASK) >> 0)
+
+/* HCCPARAMS offset from PCI base address */
+#define HCC_PARAMS_OFFSET	0x10
+
+/* HCCPARAMS - hcc_params - bitmasks */
+/* 1: device controller can use 64-bit address pointers. */
+#define HCC_64BIT_ADDR(p)	((p) & BIT(0))
+/* 1: device controller uses 64-byte Device Context structures. */
+#define HCC_64BYTE_CONTEXT(p)	((p) & BIT(2))
+/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15. */
+#define HCC_MAX_PSA(p)		((((p) >> 12) & 0xf) + 1)
+/* Extended Capabilities pointer from PCI base. */
+#define HCC_EXT_CAPS(p)		(((p) & GENMASK(31, 16)) >> 16)
+
+#define CTX_SIZE(_hcc)		(HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
+
+/* db_off bitmask - bits 0:1 reserved. */
+#define DBOFF_MASK	GENMASK(31, 2)
+
+/* run_regs_off bitmask - bits 0:4 reserved. */
+#define RTSOFF_MASK	GENMASK(31, 5)
+
+/**
+ * struct cdnsp_op_regs - Device Controller Operational Registers.
+ * @command: USBCMD - Controller command register.
+ * @status: USBSTS - Controller status register.
+ * @page_size: This indicates the page size that the device controller supports.
+ *             If bit n is set, the controller supports a page size of 2^(n+12),
+ *             up to a 128MB page size. 4K is the minimum page size.
+ * @dnctrl: DNCTRL - Device notification control register.
+ * @cmd_ring: CRP - 64-bit Command Ring Pointer.
+ * @dcbaa_ptr: DCBAAP - 64-bit Device Context Base Address Array Pointer.
+ * @config_reg: CONFIG - Configure Register
+ * @port_reg_base: PORTSCn - base address for Port Status and Control
+ *                 Each port has a Port Status and Control register,
+ *                 followed by a Port Power Management Status and Control
+ *                 register, a Port Link Info register, and a reserved
+ *                 register.
+ */
+struct cdnsp_op_regs {
+	__le32 command;
+	__le32 status;
+	__le32 page_size;
+	__le32 reserved1;
+	__le32 reserved2;
+	__le32 dnctrl;
+	__le64 cmd_ring;
+	/* rsvd: offset 0x20-2F. */
+	__le32 reserved3[4];
+	__le64 dcbaa_ptr;
+	__le32 config_reg;
+	/* rsvd: offset 0x3C-3FF. */
+	__le32 reserved4[241];
+	/* port 1 registers, which serve as a base address for other ports. */
+	__le32 port_reg_base;
+};
+
+/* Number of registers per port. */
+#define NUM_PORT_REGS	4
+
+/**
+ * struct cdnsp_port_regs - Port Registers.
+ * @portsc: PORTSC - Port Status and Control Register.
+ * @portpmsc: PORTPMSC - Port Power Managements Status and Control Register.
+ * @portli: PORTLI - Port Link Info register.
+ */
+struct cdnsp_port_regs {
+	__le32 portsc;
+	__le32 portpmsc;
+	__le32 portli;
+	__le32 reserved;
+};
+
+/*
+ * These bits are Read Only (RO) and should be saved and written to the
+ * registers: 0 (connect status) and  10:13 (port speed).
+ * These bits are also sticky - meaning they're in the AUX well and they aren't
+ * changed by a hot and warm.
+ */
+#define CDNSP_PORT_RO	(PORT_CONNECT | DEV_SPEED_MASK)
+
+/*
+ * These bits are RW; writing a 0 clears the bit, writing a 1 sets the bit:
+ * bits 5:8 (link state), 25:26  ("wake on" enable state)
+ */
+#define CDNSP_PORT_RWS	(PORT_PLS_MASK | PORT_WKCONN_E | PORT_WKDISC_E)
+
+/*
+ * These bits are RW; writing a 1 clears the bit, writing a 0 has no effect:
+ * bits 1 (port enable/disable), 17  ( connect changed),
+ * 21 (port reset changed) , 22 (Port Link State Change),
+ */
+#define CDNSP_PORT_RW1CS (PORT_PED | PORT_CSC | PORT_RC | PORT_PLC)
+
+/* USBCMD - USB command - bitmasks. */
+/* Run/Stop, controller execution - do not write unless controller is halted.*/
+#define CMD_R_S		BIT(0)
+/*
+ * Reset device controller - resets internal controller state machine and all
+ * registers (except PCI config regs).
+ */
+#define CMD_RESET	BIT(1)
+/* Event Interrupt Enable - a '1' allows interrupts from the controller. */
+#define CMD_INTE	BIT(2)
+/*
+ * Device System Error Interrupt Enable - get out-of-band signal for
+ * controller errors.
+ */
+#define CMD_DSEIE	BIT(3)
+/* device controller save/restore state. */
+#define CMD_CSS		BIT(8)
+#define CMD_CRS		BIT(9)
+/*
+ * Enable Wrap Event - '1' means device controller generates an event
+ * when MFINDEX wraps.
+ */
+#define CMD_EWE		BIT(10)
+/* 1: device enabled */
+#define CMD_DEVEN	BIT(17)
+/* bits 18:31 are reserved (and should be preserved on writes). */
+
+/* Command register values to disable interrupts. */
+#define CDNSP_IRQS	(CMD_INTE | CMD_DSEIE | CMD_EWE)
+
+/* USBSTS - USB status - bitmasks */
+/* controller not running - set to 1 when run/stop bit is cleared. */
+#define STS_HALT	BIT(0)
+/*
+ * serious error, e.g. PCI parity error. The controller will clear
+ * the run/stop bit.
+ */
+#define STS_FATAL	BIT(2)
+/* event interrupt - clear this prior to clearing any IP flags in IR set.*/
+#define STS_EINT	BIT(3)
+/* port change detect */
+#define STS_PCD		BIT(4)
+/* save state status - '1' means device controller is saving state. */
+#define STS_SSS		BIT(8)
+/* restore state status - '1' means controllers is restoring state. */
+#define STS_RSS		BIT(9)
+/* 1: save or restore error */
+#define STS_SRE		BIT(10)
+/* 1: device Not Ready to accept doorbell or op reg writes after reset. */
+#define STS_CNR		BIT(11)
+/* 1: internal Device Controller Error.*/
+#define STS_HCE		BIT(12)
+
+/* CRCR - Command Ring Control Register - cmd_ring bitmasks. */
+/* bit 0 is the command ring cycle state. */
+#define CMD_RING_CS		BIT(0)
+/* stop ring immediately - abort the currently executing command. */
+#define CMD_RING_ABORT		BIT(2)
+/*
+ * Command Ring Busy.
+ * Set when Doorbell register is written with DB for command and cleared when
+ * the controller reached end of CR.
+ */
+#define CMD_RING_BUSY(p)	((p) & BIT(4))
+/* 1: command ring is running */
+#define CMD_RING_RUNNING	BIT(3)
+/* Command Ring pointer - bit mask for the lower 32 bits. */
+#define CMD_RING_RSVD_BITS	GENMASK(5, 0)
+
+/* CONFIG - Configure Register - config_reg bitmasks. */
+/* bits 0:7 - maximum number of device slots enabled. */
+#define MAX_DEVS		GENMASK(7, 0)
+/* bit 8: U3 Entry Enabled, assert PLC when controller enters U3. */
+#define CONFIG_U3E		BIT(8)
+
+/* PORTSC - Port Status and Control Register - port_reg_base bitmasks */
+/* 1: device connected. */
+#define PORT_CONNECT		BIT(0)
+/* 1: port enabled. */
+#define PORT_PED		BIT(1)
+/* 1: port reset signaling asserted. */
+#define PORT_RESET		BIT(4)
+/*
+ * Port Link State - bits 5:8
+ * A read gives the current link PM state of the port,
+ * a write with Link State Write Strobe sets the link state.
+ */
+#define PORT_PLS_MASK		GENMASK(8, 5)
+#define XDEV_U0			(0x0 << 5)
+#define XDEV_U1			(0x1 << 5)
+#define XDEV_U2			(0x2 << 5)
+#define XDEV_U3			(0x3 << 5)
+#define XDEV_DISABLED		(0x4 << 5)
+#define XDEV_RXDETECT		(0x5 << 5)
+#define XDEV_INACTIVE		(0x6 << 5)
+#define XDEV_POLLING		(0x7 << 5)
+#define XDEV_RECOVERY		(0x8 << 5)
+#define XDEV_HOT_RESET		(0x9 << 5)
+#define XDEV_COMP_MODE		(0xa << 5)
+#define XDEV_TEST_MODE		(0xb << 5)
+#define XDEV_RESUME		(0xf << 5)
+/* 1: port has power. */
+#define PORT_POWER		BIT(9)
+/*
+ * bits 10:13 indicate device speed:
+ * 0 - undefined speed - port hasn't be initialized by a reset yet
+ * 1 - full speed
+ * 2 - Reserved (Low Speed not supported
+ * 3 - high speed
+ * 4 - super speed
+ * 5 - super speed
+ * 6-15 reserved
+ */
+#define DEV_SPEED_MASK		GENMASK(13, 10)
+#define XDEV_FS			(0x1 << 10)
+#define XDEV_HS			(0x3 << 10)
+#define XDEV_SS			(0x4 << 10)
+#define XDEV_SSP		(0x5 << 10)
+#define XDEV_SSP1x2		(0x6 << 10)
+#define XDEV_SSP2x2		(0x7 << 10)
+#define DEV_UNDEFSPEED(p)	(((p) & DEV_SPEED_MASK) == (0x0 << 10))
+#define DEV_FULLSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_FS)
+#define DEV_HIGHSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_HS)
+#define DEV_SUPERSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_SS)
+#define DEV_SUPERSPEEDPLUS(p)	(((p) & DEV_SPEED_MASK) == XDEV_SSP)
+#define DEV_SSP_GEN1x2(p)	(((p) & DEV_SPEED_MASK) == XDEV_SSP1x2)
+#define DEV_SSP_GEN2x2(p)	(((p) & DEV_SPEED_MASK) == XDEV_SSP2x2)
+#define DEV_SUPERSPEED_ANY(p)	(((p) & DEV_SPEED_MASK) >= XDEV_SS)
+#define DEV_PORT_SPEED(p)	(((p) >> 10) & 0x0f)
+/* Port Link State Write Strobe - set this when changing link state */
+#define PORT_LINK_STROBE	BIT(16)
+/* 1: connect status change */
+#define PORT_CSC		BIT(17)
+/* 1: warm reset for a USB 3.0 device is done. */
+#define PORT_WRC		BIT(19)
+/* 1: reset change - 1 to 0 transition of PORT_RESET */
+#define PORT_RC			BIT(21)
+/*
+ * port link status change - set on some port link state transitions:
+ * Transition			Reason
+ * ----------------------------------------------------------------------------
+ * - U3 to Resume		Wakeup signaling from a device
+ * - Resume to Recovery to U0	USB 3.0 device resume
+ * - Resume to U0		USB 2.0 device resume
+ * - U3 to Recovery to U0	Software resume of USB 3.0 device complete
+ * - U3 to U0			Software resume of USB 2.0 device complete
+ * - U2 to U0			L1 resume of USB 2.1 device complete
+ * - U0 to U0			L1 entry rejection by USB 2.1 device
+ * - U0 to disabled		L1 entry error with USB 2.1 device
+ * - Any state to inactive	Error on USB 3.0 port
+ */
+#define PORT_PLC		BIT(22)
+/* Port configure error change - port failed to configure its link partner. */
+#define PORT_CEC		BIT(23)
+/* Wake on connect (enable). */
+#define PORT_WKCONN_E		BIT(25)
+/* Wake on disconnect (enable). */
+#define PORT_WKDISC_E		BIT(26)
+/* Indicates if Warm Reset is being received. */
+#define PORT_WR			BIT(31)
+
+#define PORT_CHANGE_BITS (PORT_CSC | PORT_WRC | PORT_RC | PORT_PLC | PORT_CEC)
+
+/* PORTPMSCUSB3 - Port Power Management Status and Control - bitmasks. */
+/*  Enables U1 entry. */
+#define PORT_U1_TIMEOUT_MASK	GENMASK(7, 0)
+#define PORT_U1_TIMEOUT(p)	((p) & PORT_U1_TIMEOUT_MASK)
+/* Enables U2 entry .*/
+#define PORT_U2_TIMEOUT_MASK	GENMASK(14, 8)
+#define PORT_U2_TIMEOUT(p)	(((p) << 8) & PORT_U2_TIMEOUT_MASK)
+
+/* PORTPMSCUSB2 - Port Power Management Status and Control - bitmasks. */
+#define PORT_L1S_MASK		GENMASK(2, 0)
+#define PORT_L1S(p)		((p) & PORT_L1S_MASK)
+#define PORT_L1S_ACK		PORT_L1S(1)
+#define PORT_L1S_NYET		PORT_L1S(2)
+#define PORT_L1S_STALL		PORT_L1S(3)
+#define PORT_L1S_TIMEOUT	PORT_L1S(4)
+/* Remote Wake Enable. */
+#define PORT_RWE		BIT(3)
+/* Best Effort Service Latency (BESL). */
+#define PORT_BESL(p)		(((p) << 4) & GENMASK(7, 4))
+/* Hardware LPM Enable (HLE). */
+#define PORT_HLE		BIT(16)
+/* Received Best Effort Service Latency (BESL). */
+#define PORT_RRBESL(p)		(((p) & GENMASK(20, 17)) >> 17)
+/* Port Test Control. */
+#define PORT_TEST_MODE_MASK	GENMASK(31, 28)
+#define PORT_TEST_MODE(p)	(((p) << 28) & PORT_TEST_MODE_MASK)
+
+/**
+ * struct cdnsp_intr_reg - Interrupt Register Set.
+ * @irq_pending: IMAN - Interrupt Management Register. Used to enable
+ *               interrupts and check for pending interrupts.
+ * @irq_control: IMOD - Interrupt Moderation Register.
+ *               Used to throttle interrupts.
+ * @erst_size: Number of segments in the Event Ring Segment Table (ERST).
+ * @erst_base: ERST base address.
+ * @erst_dequeue: Event ring dequeue pointer.
+ *
+ * Each interrupter (defined by a MSI-X vector) has an event ring and an Event
+ * Ring Segment Table (ERST) associated with it. The event ring is comprised of
+ * multiple segments of the same size. The controller places events on the ring
+ * and "updates the Cycle bit in the TRBs to indicate to software the current
+ * position of the Enqueue Pointer." The driver processes those events and
+ * updates the dequeue pointer.
+ */
+struct cdnsp_intr_reg {
+	__le32 irq_pending;
+	__le32 irq_control;
+	__le32 erst_size;
+	__le32 rsvd;
+	__le64 erst_base;
+	__le64 erst_dequeue;
+};
+
+/* IMAN - Interrupt Management Register - irq_pending bitmasks l. */
+#define IMAN_IE			BIT(1)
+#define IMAN_IP			BIT(0)
+/* bits 2:31 need to be preserved */
+#define IMAN_IE_SET(p)		((p) | IMAN_IE)
+#define IMAN_IE_CLEAR(p)	((p) & ~IMAN_IE)
+
+/* IMOD - Interrupter Moderation Register - irq_control bitmasks. */
+/*
+ * Minimum interval between interrupts (in 250ns intervals). The interval
+ * between interrupts will be longer if there are no events on the event ring.
+ * Default is 4000 (1 ms).
+ */
+#define IMOD_INTERVAL_MASK	GENMASK(15, 0)
+/* Counter used to count down the time to the next interrupt - HW use only */
+#define IMOD_COUNTER_MASK	GENMASK(31, 16)
+#define IMOD_DEFAULT_INTERVAL	0
+
+/* erst_size bitmasks. */
+/* Preserve bits 16:31 of erst_size. */
+#define ERST_SIZE_MASK		GENMASK(31, 16)
+
+/* erst_dequeue bitmasks. */
+/*
+ * Dequeue ERST Segment Index (DESI) - Segment number (or alias)
+ * where the current dequeue pointer lies. This is an optional HW hint.
+ */
+#define ERST_DESI_MASK		GENMASK(2, 0)
+/* Event Handler Busy (EHB) - is the event ring scheduled to be serviced. */
+#define ERST_EHB		BIT(3)
+#define ERST_PTR_MASK		GENMASK(3, 0)
+
+/**
+ * struct cdnsp_run_regs
+ * @microframe_index: MFINDEX - current microframe number.
+ * @ir_set: Array of Interrupter registers.
+ *
+ * Device Controller Runtime Registers:
+ * "Software should read and write these registers using only Dword (32 bit)
+ * or larger accesses"
+ */
+struct cdnsp_run_regs {
+	__le32 microframe_index;
+	__le32 rsvd[7];
+	struct cdnsp_intr_reg ir_set[128];
+};
+
+/**
+ * USB2.0 Port Peripheral Configuration Registers.
+ * @ext_cap: Header register for Extended Capability.
+ * @port_reg1: Timer Configuration Register.
+ * @port_reg2: Timer Configuration Register.
+ * @port_reg3: Timer Configuration Register.
+ * @port_reg4: Timer Configuration Register.
+ * @port_reg5: Timer Configuration Register.
+ * @port_reg6: Chicken bits for USB20PPP.
+ */
+struct cdnsp_20port_cap {
+	__le32 ext_cap;
+	__le32 port_reg1;
+	__le32 port_reg2;
+	__le32 port_reg3;
+	__le32 port_reg4;
+	__le32 port_reg5;
+	__le32 port_reg6;
+};
+
+/* Extended capability register fields */
+#define EXT_CAPS_ID(p)			(((p) >> 0) & GENMASK(7, 0))
+#define EXT_CAPS_NEXT(p)		(((p) >> 8) & GENMASK(7, 0))
+/* Extended capability IDs - ID 0 reserved */
+#define EXT_CAPS_PROTOCOL		2
+
+/* USB 2.0 Port Peripheral Configuration Extended Capability */
+#define EXT_CAP_CFG_DEV_20PORT_CAP_ID	0xC1
+/*
+ * Setting this bit to '1' enables automatic wakeup from L1 state on transfer
+ * TRB prepared when USBSSP operates in USB2.0 mode.
+ */
+#define PORT_REG6_L1_L0_HW_EN		BIT(1)
+/*
+ * Setting this bit to '1' forces Full Speed when USBSSP operates in USB2.0
+ * mode (disables High Speed).
+ */
+#define PORT_REG6_FORCE_FS		BIT(0)
+
+/**
+ * USB3.x Port Peripheral Configuration Registers.
+ * @ext_cap: Header register for Extended Capability.
+ * @mode_addr: Miscellaneous 3xPORT operation mode configuration register.
+ * @mode_2: 3x Port Control Register 2.
+ */
+struct cdnsp_3xport_cap {
+	__le32 ext_cap;
+	__le32 mode_addr;
+	__le32 reserved[52];
+	__le32 mode_2;
+};
+
+/* Extended Capability Header for 3XPort Configuration Registers. */
+#define D_XEC_CFG_3XPORT_CAP		0xC0
+#define CFG_3XPORT_SSP_SUPPORT		BIT(31)
+#define CFG_3XPORT_U1_PIPE_CLK_GATE_EN	BIT(0)
+
+/* Revision Extended Capability ID */
+#define RTL_REV_CAP			0xC4
+#define RTL_REV_CAP_RX_BUFF_CMD_SIZE	BITMASK(31, 24)
+#define RTL_REV_CAP_RX_BUFF_SIZE	BITMASK(15, 0)
+#define RTL_REV_CAP_TX_BUFF_CMD_SIZE	BITMASK(31, 24)
+#define RTL_REV_CAP_TX_BUFF_SIZE	BITMASK(15, 0)
+
+#define CDNSP_VER_1 0x00000000
+#define CDNSP_VER_2 0x10000000
+
+#define CDNSP_IF_EP_EXIST(pdev, ep_num, dir) \
+			 (readl(&(pdev)->rev_cap->ep_supported) & \
+			 (BIT(ep_num) << ((dir) ? 0 : 16)))
+
+/**
+ * struct cdnsp_rev_cap - controller capabilities.
+ * @ext_cap: Header for RTL Revision Extended Capability.
+ * @rtl_revision: RTL revision.
+ * @rx_buff_size: Rx buffer sizes.
+ * @tx_buff_size: Tx buffer sizes.
+ * @ep_supported: Supported endpoints.
+ * @ctrl_revision: Controller revision ID.
+ */
+struct cdnsp_rev_cap {
+	__le32 ext_cap;
+	__le32 rtl_revision;
+	__le32 rx_buff_size;
+	__le32 tx_buff_size;
+	__le32 ep_supported;
+	__le32 ctrl_revision;
+};
+
+/* USB2.0 Port Peripheral Configuration Registers. */
+#define D_XEC_PRE_REGS_CAP		0xC8
+#define REG_CHICKEN_BITS_2_OFFSET	0x48
+#define CHICKEN_XDMA_2_TP_CACHE_DIS	BIT(28)
+
+#define REG_CHICKEN_BITS_3_OFFSET       0x4C
+#define CHICKEN_APB_TIMEOUT_SET(p, val) (((p) & ~GENMASK(21, 0)) | (val))
+
+/* XBUF Extended Capability ID. */
+#define XBUF_CAP_ID			0xCB
+#define XBUF_RX_TAG_MASK_0_OFFSET	0x1C
+#define XBUF_RX_TAG_MASK_1_OFFSET	0x24
+#define XBUF_TX_CMD_OFFSET		0x2C
+
+/**
+ * struct cdnsp_doorbell_array.
+ * @cmd_db: Command ring doorbell register.
+ * @ep_db: Endpoint ring doorbell register.
+ *         Bits 0 - 7: Endpoint target.
+ *         Bits 8 - 15: RsvdZ.
+ *         Bits 16 - 31: Stream ID.
+ */
+struct cdnsp_doorbell_array {
+	__le32 cmd_db;
+	__le32 ep_db;
+};
+
+#define DB_VALUE(ep, stream)		((((ep) + 1) & 0xff) | ((stream) << 16))
+#define DB_VALUE_EP0_OUT(ep, stream)	((ep) & 0xff)
+#define DB_VALUE_CMD			0x00000000
+
+/**
+ * struct cdnsp_container_ctx.
+ * @type: Type of context. Used to calculated offsets to contained contexts.
+ * @size: Size of the context data.
+ * @ctx_size: context data structure size - 64 or 32 bits.
+ * @dma: dma address of the bytes.
+ * @bytes: The raw context data given to HW.
+ *
+ * Represents either a Device or Input context. Holds a pointer to the raw
+ * memory used for the context (bytes) and dma address of it (dma).
+ */
+struct cdnsp_container_ctx {
+	unsigned int type;
+#define CDNSP_CTX_TYPE_DEVICE	0x1
+#define CDNSP_CTX_TYPE_INPUT	0x2
+	int size;
+	int ctx_size;
+	dma_addr_t dma;
+	u8 *bytes;
+};
+
+/**
+ * struct cdnsp_slot_ctx
+ * @dev_info: Device speed, and last valid endpoint.
+ * @dev_port: Device port number that is needed to access the USB device.
+ * @int_target: Interrupter target number.
+ * @dev_state: Slot state and device address.
+ *
+ * Slot Context - This assumes the controller uses 32-byte context
+ * structures. If the controller uses 64-byte contexts, there is an additional
+ * 32 bytes reserved at the end of the slot context for controller internal use.
+ */
+struct cdnsp_slot_ctx {
+	__le32 dev_info;
+	__le32 dev_port;
+	__le32 int_target;
+	__le32 dev_state;
+	/* offset 0x10 to 0x1f reserved for controller internal use. */
+	__le32 reserved[4];
+};
+
+/* Bits 20:23 in the Slot Context are the speed for the device. */
+#define SLOT_SPEED_FS		(XDEV_FS << 10)
+#define SLOT_SPEED_HS		(XDEV_HS << 10)
+#define SLOT_SPEED_SS		(XDEV_SS << 10)
+#define SLOT_SPEED_SSP		(XDEV_SSP << 10)
+
+/* dev_info bitmasks. */
+/* Device speed - values defined by PORTSC Device Speed field - 20:23. */
+#define DEV_SPEED		GENMASK(23, 20)
+#define GET_DEV_SPEED(n)	(((n) & DEV_SPEED) >> 20)
+/* Index of the last valid endpoint context in this device context - 27:31. */
+#define LAST_CTX_MASK		((unsigned int)GENMASK(31, 27))
+#define LAST_CTX(p)		((p) << 27)
+#define LAST_CTX_TO_EP_NUM(p)	(((p) >> 27) - 1)
+#define SLOT_FLAG		BIT(0)
+#define EP0_FLAG		BIT(1)
+
+/* dev_port bitmasks */
+/* Device port number that is needed to access the USB device. */
+#define DEV_PORT(p)		(((p) & 0xff) << 16)
+
+/* dev_state bitmasks */
+/* USB device address - assigned by the controller. */
+#define DEV_ADDR_MASK		GENMASK(7, 0)
+/* Slot state */
+#define SLOT_STATE		GENMASK(31, 27)
+#define GET_SLOT_STATE(p)	(((p) & SLOT_STATE) >> 27)
+
+#define SLOT_STATE_DISABLED	0
+#define SLOT_STATE_ENABLED	SLOT_STATE_DISABLED
+#define SLOT_STATE_DEFAULT	1
+#define SLOT_STATE_ADDRESSED	2
+#define SLOT_STATE_CONFIGURED	3
+
+/**
+ * struct cdnsp_ep_ctx.
+ * @ep_info: Endpoint state, streams, mult, and interval information.
+ * @ep_info2: Information on endpoint type, max packet size, max burst size,
+ *            error count, and whether the controller will force an event for
+ *            all transactions.
+ * @deq: 64-bit ring dequeue pointer address. If the endpoint only
+ *       defines one stream, this points to the endpoint transfer ring.
+ *       Otherwise, it points to a stream context array, which has a
+ *       ring pointer for each flow.
+ * @tx_info: Average TRB lengths for the endpoint ring and
+ *	     max payload within an Endpoint Service Interval Time (ESIT).
+ *
+ * Endpoint Context - This assumes the controller uses 32-byte context
+ * structures. If the controller uses 64-byte contexts, there is an additional
+ * 32 bytes reserved at the end of the endpoint context for controller internal
+ * use.
+ */
+struct cdnsp_ep_ctx {
+	__le32 ep_info;
+	__le32 ep_info2;
+	__le64 deq;
+	__le32 tx_info;
+	/* offset 0x14 - 0x1f reserved for controller internal use. */
+	__le32 reserved[3];
+};
+
+/* ep_info bitmasks. */
+/*
+ * Endpoint State - bits 0:2:
+ * 0 - disabled
+ * 1 - running
+ * 2 - halted due to halt condition
+ * 3 - stopped
+ * 4 - TRB error
+ * 5-7 - reserved
+ */
+#define EP_STATE_MASK		GENMASK(3, 0)
+#define EP_STATE_DISABLED	0
+#define EP_STATE_RUNNING	1
+#define EP_STATE_HALTED		2
+#define EP_STATE_STOPPED	3
+#define EP_STATE_ERROR		4
+#define GET_EP_CTX_STATE(ctx)	(le32_to_cpu((ctx)->ep_info) & EP_STATE_MASK)
+
+/* Mult - Max number of burst within an interval, in EP companion desc. */
+#define EP_MULT(p)			(((p) << 8) & GENMASK(9, 8))
+#define CTX_TO_EP_MULT(p)		(((p) & GENMASK(9, 8)) >> 8)
+/* bits 10:14 are Max Primary Streams. */
+/* bit 15 is Linear Stream Array. */
+/* Interval - period between requests to an endpoint - 125u increments. */
+#define EP_INTERVAL(p)			(((p) << 16) & GENMASK(23, 16))
+#define EP_INTERVAL_TO_UFRAMES(p)	(1 << (((p) & GENMASK(23, 16)) >> 16))
+#define CTX_TO_EP_INTERVAL(p)		(((p) & GENMASK(23, 16)) >> 16)
+#define EP_MAXPSTREAMS_MASK		GENMASK(14, 10)
+#define EP_MAXPSTREAMS(p)		(((p) << 10) & EP_MAXPSTREAMS_MASK)
+#define CTX_TO_EP_MAXPSTREAMS(p)	(((p) & EP_MAXPSTREAMS_MASK) >> 10)
+/* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */
+#define EP_HAS_LSA			BIT(15)
+
+/* ep_info2 bitmasks */
+#define ERROR_COUNT(p)		(((p) & 0x3) << 1)
+#define CTX_TO_EP_TYPE(p)	(((p) >> 3) & 0x7)
+#define EP_TYPE(p)		((p) << 3)
+#define ISOC_OUT_EP		1
+#define BULK_OUT_EP		2
+#define INT_OUT_EP		3
+#define CTRL_EP			4
+#define ISOC_IN_EP		5
+#define BULK_IN_EP		6
+#define INT_IN_EP		7
+/* bit 6 reserved. */
+/* bit 7 is Device Initiate Disable - for disabling stream selection. */
+#define MAX_BURST(p)		(((p) << 8) & GENMASK(15, 8))
+#define CTX_TO_MAX_BURST(p)	(((p) & GENMASK(15, 8)) >> 8)
+#define MAX_PACKET(p)		(((p) << 16) & GENMASK(31, 16))
+#define MAX_PACKET_MASK		GENMASK(31, 16)
+#define MAX_PACKET_DECODED(p)	(((p) & GENMASK(31, 16)) >> 16)
+
+/* tx_info bitmasks. */
+#define EP_AVG_TRB_LENGTH(p)		((p) & GENMASK(15, 0))
+#define EP_MAX_ESIT_PAYLOAD_LO(p)	(((p) << 16) & GENMASK(31, 16))
+#define EP_MAX_ESIT_PAYLOAD_HI(p)	((((p) & GENMASK(23, 16)) >> 16) << 24)
+#define CTX_TO_MAX_ESIT_PAYLOAD_LO(p)	(((p) & GENMASK(31, 16)) >> 16)
+#define CTX_TO_MAX_ESIT_PAYLOAD_HI(p)	(((p) & GENMASK(31, 24)) >> 24)
+
+/* deq bitmasks. */
+#define EP_CTX_CYCLE_MASK		BIT(0)
+#define CTX_DEQ_MASK			(~0xfL)
+
+/**
+ * struct cdnsp_input_control_context
+ * Input control context;
+ *
+ * @drop_context: Set the bit of the endpoint context you want to disable.
+ * @add_context: Set the bit of the endpoint context you want to enable.
+ */
+struct cdnsp_input_control_ctx {
+	__le32 drop_flags;
+	__le32 add_flags;
+	__le32 rsvd2[6];
+};
+
+/**
+ * Represents everything that is needed to issue a command on the command ring.
+ *
+ * @in_ctx: Pointer to input context structure.
+ * @status: Command Completion Code for last command.
+ * @command_trb: Pointer to command TRB.
+ */
+struct cdnsp_command {
+	/* Input context for changing device state. */
+	struct cdnsp_container_ctx *in_ctx;
+	u32 status;
+	union cdnsp_trb *command_trb;
+};
+
+/**
+ * Stream context structure.
+ *
+ * @stream_ring: 64-bit stream ring address, cycle state, and stream type.
+ * @reserved: offset 0x14 - 0x1f reserved for controller internal use.
+ */
+struct cdnsp_stream_ctx {
+	__le64 stream_ring;
+	__le32 reserved[2];
+};
+
+/* Stream Context Types - bits 3:1 of stream ctx deq ptr. */
+#define SCT_FOR_CTX(p)		(((p) << 1) & GENMASK(3, 1))
+/* Secondary stream array type, dequeue pointer is to a transfer ring. */
+#define SCT_SEC_TR		0
+/* Primary stream array type, dequeue pointer is to a transfer ring. */
+#define SCT_PRI_TR		1
+
+/**
+ *  struct cdnsp_stream_info: Representing everything that is needed to
+ *                            supports stream capable endpoints.
+ *  @stream_rings: Array of pointers containing Transfer rings for all
+ *                 supported streams.
+ *  @num_streams: Number of streams, including stream 0.
+ *  @stream_ctx_array: The stream context array may be bigger than the number
+ *                     of streams the driver asked for.
+ *  @num_stream_ctxs: Number of streams.
+ *  @ctx_array_dma: Dma address of Context Stream Array.
+ *  @trb_address_map: For mapping physical TRB addresses to segments in
+ *                    stream rings.
+ *  @td_count: Number of TDs associated with endpoint.
+ *  @first_prime_det: First PRIME packet detected.
+ *  @drbls_count: Number of allowed doorbells.
+ */
+struct cdnsp_stream_info {
+	struct cdnsp_ring **stream_rings;
+	unsigned int num_streams;
+	struct cdnsp_stream_ctx *stream_ctx_array;
+	unsigned int num_stream_ctxs;
+	dma_addr_t ctx_array_dma;
+	struct radix_tree_root trb_address_map;
+	int td_count;
+	u8 first_prime_det;
+#define STREAM_DRBL_FIFO_DEPTH 2
+	u8 drbls_count;
+};
+
+#define STREAM_LOG_STREAMS 4
+#define STREAM_NUM_STREAMS BIT(STREAM_LOG_STREAMS)
+
+#if STREAM_LOG_STREAMS > 16 && STREAM_LOG_STREAMS < 1
+#error "Not suupported stream value"
+#endif
+
+/**
+ * struct cdnsp_ep - extended device side representation of USB endpoint.
+ * @endpoint: usb endpoint
+ * @pending_req_list: List of requests queuing on transfer ring.
+ * @pdev: Device associated with this endpoint.
+ * @number: Endpoint number (1 - 15).
+ * idx: The device context index (DCI).
+ * interval: Interval between packets used for ISOC endpoint.
+ * @name: A human readable name e.g. ep1out.
+ * @direction: Endpoint direction.
+ * @buffering: Number of on-chip buffers related to endpoint.
+ * @buffering_period; Number of on-chip buffers related to periodic endpoint.
+ * @in_ctx: Pointer to input endpoint context structure.
+ * @out_ctx: Pointer to output endpoint context structure.
+ * @ring: Pointer to transfer ring.
+ * @stream_info: Hold stream information.
+ * @ep_state: Current state of endpoint.
+ * @skip: Sometimes the controller can not process isochronous endpoint ring
+ *        quickly enough, and it will miss some isoc tds on the ring and
+ *        generate Missed Service Error Event.
+ *        Set skip flag when receive a Missed Service Error Event and
+ *        process the missed tds on the endpoint ring.
+ * @wa1_nop_trb: hold pointer to NOP trb.
+ */
+struct cdnsp_ep {
+	struct usb_ep endpoint;
+	struct list_head pending_list;
+	struct cdnsp_device *pdev;
+	u8 number;
+	u8 idx;
+	u32 interval;
+	char name[20];
+	u8 direction;
+	u8 buffering;
+	u8 buffering_period;
+	struct cdnsp_ep_ctx *in_ctx;
+	struct cdnsp_ep_ctx *out_ctx;
+	struct cdnsp_ring *ring;
+	struct cdnsp_stream_info stream_info;
+	unsigned int ep_state;
+#define EP_ENABLED		BIT(0)
+#define EP_DIS_IN_RROGRESS	BIT(1)
+#define EP_HALTED		BIT(2)
+#define EP_STOPPED		BIT(3)
+#define EP_WEDGE		BIT(4)
+#define EP0_HALTED_STATUS	BIT(5)
+#define EP_HAS_STREAMS		BIT(6)
+#define EP_UNCONFIGURED		BIT(7)
+
+	bool skip;
+	union cdnsp_trb	 *wa1_nop_trb;
+
+};
+
+/**
+ * struct cdnsp_device_context_array
+ * @dev_context_ptr: Array of 64-bit DMA addresses for device contexts.
+ * @dma: DMA address for device contexts structure.
+ */
+struct cdnsp_device_context_array {
+	__le64 dev_context_ptrs[CDNSP_DEV_MAX_SLOTS + 1];
+	dma_addr_t dma;
+};
+
+/**
+ * struct cdnsp_transfer_event.
+ * @buffer: 64-bit buffer address, or immediate data.
+ * @transfer_len: Data length transferred.
+ * @flags: Field is interpreted differently based on the type of TRB.
+ */
+struct cdnsp_transfer_event {
+	__le64 buffer;
+	__le32 transfer_len;
+	__le32 flags;
+};
+
+/* Invalidate event after disabling endpoint. */
+#define TRB_EVENT_INVALIDATE 8
+
+/* Transfer event TRB length bit mask. */
+/* bits 0:23 */
+#define EVENT_TRB_LEN(p)			((p) & GENMASK(23, 0))
+/* Completion Code - only applicable for some types of TRBs */
+#define COMP_CODE_MASK				(0xff << 24)
+#define GET_COMP_CODE(p)			(((p) & COMP_CODE_MASK) >> 24)
+#define COMP_INVALID				0
+#define COMP_SUCCESS				1
+#define COMP_DATA_BUFFER_ERROR			2
+#define COMP_BABBLE_DETECTED_ERROR		3
+#define COMP_TRB_ERROR				5
+#define COMP_RESOURCE_ERROR			7
+#define COMP_NO_SLOTS_AVAILABLE_ERROR		9
+#define COMP_INVALID_STREAM_TYPE_ERROR		10
+#define COMP_SLOT_NOT_ENABLED_ERROR		11
+#define COMP_ENDPOINT_NOT_ENABLED_ERROR		12
+#define COMP_SHORT_PACKET			13
+#define COMP_RING_UNDERRUN			14
+#define COMP_RING_OVERRUN			15
+#define COMP_VF_EVENT_RING_FULL_ERROR		16
+#define COMP_PARAMETER_ERROR			17
+#define COMP_CONTEXT_STATE_ERROR		19
+#define COMP_EVENT_RING_FULL_ERROR		21
+#define COMP_INCOMPATIBLE_DEVICE_ERROR		22
+#define COMP_MISSED_SERVICE_ERROR		23
+#define COMP_COMMAND_RING_STOPPED		24
+#define COMP_COMMAND_ABORTED			25
+#define COMP_STOPPED				26
+#define COMP_STOPPED_LENGTH_INVALID		27
+#define COMP_STOPPED_SHORT_PACKET		28
+#define COMP_MAX_EXIT_LATENCY_TOO_LARGE_ERROR	29
+#define COMP_ISOCH_BUFFER_OVERRUN		31
+#define COMP_EVENT_LOST_ERROR			32
+#define COMP_UNDEFINED_ERROR			33
+#define COMP_INVALID_STREAM_ID_ERROR		34
+
+/*Transfer Event NRDY bit fields */
+#define TRB_TO_DEV_STREAM(p)			((p) & GENMASK(16, 0))
+#define TRB_TO_HOST_STREAM(p)			((p) & GENMASK(16, 0))
+#define STREAM_PRIME_ACK			0xFFFE
+#define STREAM_REJECTED				0xFFFF
+
+/** Transfer Event bit fields **/
+#define TRB_TO_EP_ID(p)				(((p) & GENMASK(20, 16)) >> 16)
+
+/**
+ * struct cdnsp_link_trb
+ * @segment_ptr: 64-bit segment pointer.
+ * @intr_target: Interrupter target.
+ * @control: Flags.
+ */
+struct cdnsp_link_trb {
+	__le64 segment_ptr;
+	__le32 intr_target;
+	__le32 control;
+};
+
+/* control bitfields */
+#define LINK_TOGGLE	BIT(1)
+
+/**
+ * struct cdnsp_event_cmd - Command completion event TRB.
+ * cmd_trb: Pointer to command TRB, or the value passed by the event data trb
+ * status: Command completion parameters and error code.
+ * flags: Flags.
+ */
+struct cdnsp_event_cmd {
+	__le64 cmd_trb;
+	__le32 status;
+	__le32 flags;
+};
+
+/* flags bitmasks */
+
+/* Address device - disable SetAddress. */
+#define TRB_BSR		BIT(9)
+
+/* Configure Endpoint - Deconfigure. */
+#define TRB_DC		BIT(9)
+
+/* Force Header */
+#define TRB_FH_TO_PACKET_TYPE(p)	((p) & GENMASK(4, 0))
+#define TRB_FH_TR_PACKET		0x4
+#define TRB_FH_TO_DEVICE_ADDRESS(p)	(((p) << 25) & GENMASK(31, 25))
+#define TRB_FH_TR_PACKET_DEV_NOT	0x6
+#define TRB_FH_TO_NOT_TYPE(p)		(((p) << 4) & GENMASK(7, 4))
+#define TRB_FH_TR_PACKET_FUNCTION_WAKE	0x1
+#define TRB_FH_TO_INTERFACE(p)		(((p) << 8) & GENMASK(15, 8))
+
+enum cdnsp_setup_dev {
+	SETUP_CONTEXT_ONLY,
+	SETUP_CONTEXT_ADDRESS,
+};
+
+/* bits 24:31 are the slot ID. */
+#define TRB_TO_SLOT_ID(p)		(((p) & GENMASK(31, 24)) >> 24)
+#define SLOT_ID_FOR_TRB(p)		(((p) << 24) & GENMASK(31, 24))
+
+/* Stop Endpoint TRB - ep_index to endpoint ID for this TRB. */
+#define TRB_TO_EP_INDEX(p)		(((p) >> 16) & 0x1f)
+
+#define EP_ID_FOR_TRB(p)		((((p) + 1) << 16) & GENMASK(20, 16))
+
+#define SUSPEND_PORT_FOR_TRB(p)		(((p) & 1) << 23)
+#define TRB_TO_SUSPEND_PORT(p)		(((p) >> 23) & 0x1)
+#define LAST_EP_INDEX			30
+
+/* Set TR Dequeue Pointer command TRB fields. */
+#define TRB_TO_STREAM_ID(p)		((((p) & GENMASK(31, 16)) >> 16))
+#define STREAM_ID_FOR_TRB(p)		((((p)) << 16) & GENMASK(31, 16))
+#define SCT_FOR_TRB(p)			(((p) << 1) & 0x7)
+
+/*
+ * Halt Endpoint Command TRB field.
+ * The ESP bit only exists in the SSP2 controller.
+ */
+#define TRB_ESP				BIT(9)
+
+/* Link TRB specific fields. */
+#define TRB_TC				BIT(1)
+
+/* Port Status Change Event TRB fields. */
+/* Port ID - bits 31:24. */
+#define GET_PORT_ID(p)			(((p) & GENMASK(31, 24)) >> 24)
+#define SET_PORT_ID(p)			(((p) << 24) & GENMASK(31, 24))
+#define EVENT_DATA			BIT(2)
+
+/* Normal TRB fields. */
+/* transfer_len bitmasks - bits 0:16. */
+#define TRB_LEN(p)			((p) & GENMASK(16, 0))
+/* TD Size, packets remaining in this TD, bits 21:17 (5 bits, so max 31). */
+#define TRB_TD_SIZE(p)			(min((p), (u32)31) << 17)
+#define GET_TD_SIZE(p)			(((p) & GENMASK(21, 17)) >> 17)
+/*
+ * Controller uses the TD_SIZE field for TBC if Extended TBC
+ * is enabled (ETE).
+ */
+#define TRB_TD_SIZE_TBC(p)		(min((p), (u32)31) << 17)
+/* Interrupter Target - which MSI-X vector to target the completion event at. */
+#define TRB_INTR_TARGET(p)		(((p) << 22) & GENMASK(31, 22))
+#define GET_INTR_TARGET(p)		(((p) & GENMASK(31, 22)) >> 22)
+/*
+ * Total burst count field, Rsvdz on controller with Extended TBC
+ * enabled (ETE).
+ */
+#define TRB_TBC(p)			(((p) & 0x3) << 7)
+#define TRB_TLBPC(p)			(((p) & 0xf) << 16)
+
+/* Cycle bit - indicates TRB ownership by driver or driver.*/
+#define TRB_CYCLE			BIT(0)
+/*
+ * Force next event data TRB to be evaluated before task switch.
+ * Used to pass OS data back after a TD completes.
+ */
+#define TRB_ENT				BIT(1)
+/* Interrupt on short packet. */
+#define TRB_ISP				BIT(2)
+/* Set PCIe no snoop attribute. */
+#define TRB_NO_SNOOP			BIT(3)
+/* Chain multiple TRBs into a TD. */
+#define TRB_CHAIN			BIT(4)
+/* Interrupt on completion. */
+#define TRB_IOC				BIT(5)
+/* The buffer pointer contains immediate data. */
+#define TRB_IDT				BIT(6)
+/* 0 - NRDY during data stage, 1 - NRDY during status stage (only control). */
+#define TRB_STAT			BIT(7)
+/* Block Event Interrupt. */
+#define TRB_BEI				BIT(9)
+
+/* Control transfer TRB specific fields. */
+#define TRB_DIR_IN			BIT(16)
+
+/* TRB bit mask in Data Stage TRB */
+#define TRB_SETUPID_BITMASK		GENMASK(9, 8)
+#define TRB_SETUPID(p)			((p) << 8)
+#define TRB_SETUPID_TO_TYPE(p)		(((p) & TRB_SETUPID_BITMASK) >> 8)
+
+#define TRB_SETUP_SPEEDID_USB3		0x1
+#define TRB_SETUP_SPEEDID_USB2		0x0
+#define TRB_SETUP_SPEEDID(p)		((p) & (1 << 7))
+
+#define TRB_SETUPSTAT_ACK		0x1
+#define TRB_SETUPSTAT_STALL		0x0
+#define TRB_SETUPSTAT(p)		((p) << 6)
+
+/* Isochronous TRB specific fields */
+#define TRB_SIA				BIT(31)
+#define TRB_FRAME_ID(p)			(((p) << 20) & GENMASK(30, 20))
+
+struct cdnsp_generic_trb {
+	__le32 field[4];
+};
+
+union cdnsp_trb {
+	struct cdnsp_link_trb link;
+	struct cdnsp_transfer_event trans_event;
+	struct cdnsp_event_cmd event_cmd;
+	struct cdnsp_generic_trb generic;
+};
+
+/* TRB bit mask. */
+#define TRB_TYPE_BITMASK	GENMASK(15, 10)
+#define TRB_TYPE(p)		((p) << 10)
+#define TRB_FIELD_TO_TYPE(p)	(((p) & TRB_TYPE_BITMASK) >> 10)
+
+/* TRB type IDs. */
+/* bulk, interrupt, isoc scatter/gather, and control data stage. */
+#define TRB_NORMAL		1
+/* Setup Stage for control transfers. */
+#define TRB_SETUP		2
+/* Data Stage for control transfers. */
+#define TRB_DATA		3
+/* Status Stage for control transfers. */
+#define TRB_STATUS		4
+/* ISOC transfers. */
+#define TRB_ISOC		5
+/* TRB for linking ring segments. */
+#define TRB_LINK		6
+#define TRB_EVENT_DATA		7
+/* Transfer Ring No-op (not for the command ring). */
+#define TRB_TR_NOOP		8
+
+/* Command TRBs */
+/* Enable Slot Command. */
+#define TRB_ENABLE_SLOT		9
+/* Disable Slot Command. */
+#define TRB_DISABLE_SLOT	10
+/* Address Device Command. */
+#define TRB_ADDR_DEV		11
+/* Configure Endpoint Command. */
+#define TRB_CONFIG_EP		12
+/* Evaluate Context Command. */
+#define TRB_EVAL_CONTEXT	13
+/* Reset Endpoint Command. */
+#define TRB_RESET_EP		14
+/* Stop Transfer Ring Command. */
+#define TRB_STOP_RING		15
+/* Set Transfer Ring Dequeue Pointer Command. */
+#define TRB_SET_DEQ		16
+/* Reset Device Command. */
+#define TRB_RESET_DEV		17
+/* Force Event Command (opt). */
+#define TRB_FORCE_EVENT		18
+/* Force Header Command - generate a transaction or link management packet. */
+#define TRB_FORCE_HEADER	22
+/* No-op Command - not for transfer rings. */
+#define TRB_CMD_NOOP		23
+/* TRB IDs 24-31 reserved. */
+
+/* Event TRBS. */
+/* Transfer Event. */
+#define TRB_TRANSFER		32
+/* Command Completion Event. */
+#define TRB_COMPLETION		33
+/* Port Status Change Event. */
+#define TRB_PORT_STATUS		34
+/* Device Controller Event. */
+#define TRB_HC_EVENT		37
+/* MFINDEX Wrap Event - microframe counter wrapped. */
+#define TRB_MFINDEX_WRAP	39
+/* TRB IDs 40-47 reserved. */
+/* Endpoint Not Ready Event. */
+#define TRB_ENDPOINT_NRDY	48
+/* TRB IDs 49-53 reserved. */
+/* Halt Endpoint Command. */
+#define TRB_HALT_ENDPOINT	54
+/* Doorbell Overflow Event. */
+#define TRB_DRB_OVERFLOW	57
+
+#define TRB_TYPE_LINK(x)	(((x) & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK))
+#define TRB_TYPE_LINK_LE32(x)	(((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
+					cpu_to_le32(TRB_TYPE(TRB_LINK)))
+#define TRB_TYPE_NOOP_LE32(x)	(((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
+					cpu_to_le32(TRB_TYPE(TRB_TR_NOOP)))
+
+/*
+ * TRBS_PER_SEGMENT must be a multiple of 4.
+ * The command ring is 64-byte aligned, so it must also be greater than 16.
+ */
+#define TRBS_PER_SEGMENT		256
+#define TRBS_PER_EVENT_SEGMENT		256
+#define TRBS_PER_EV_DEQ_UPDATE		100
+#define TRB_SEGMENT_SIZE		(TRBS_PER_SEGMENT * 16)
+#define TRB_SEGMENT_SHIFT		(ilog2(TRB_SEGMENT_SIZE))
+/* TRB buffer pointers can't cross 64KB boundaries. */
+#define TRB_MAX_BUFF_SHIFT		16
+#define TRB_MAX_BUFF_SIZE		BIT(TRB_MAX_BUFF_SHIFT)
+/* How much data is left before the 64KB boundary? */
+#define TRB_BUFF_LEN_UP_TO_BOUNDARY(addr) (TRB_MAX_BUFF_SIZE - \
+					((addr) & (TRB_MAX_BUFF_SIZE - 1)))
+
+/**
+ * struct cdnsp_segment - segment related data.
+ * @trbs: Array of Transfer Request Blocks.
+ * @next: Pointer to the next segment.
+ * @dma: DMA address of current segment.
+ * @bounce_dma: Bounce  buffer DMA address .
+ * @bounce_buf: Bounce buffer virtual address.
+ * bounce_offs: Bounce buffer offset.
+ * bounce_len: Bounce buffer length.
+ */
+struct cdnsp_segment {
+	union cdnsp_trb *trbs;
+	struct cdnsp_segment *next;
+	dma_addr_t dma;
+	/* Max packet sized bounce buffer for td-fragmant alignment */
+	dma_addr_t bounce_dma;
+	void *bounce_buf;
+	unsigned int bounce_offs;
+	unsigned int bounce_len;
+};
+
+/**
+ * struct cdnsp_td - Transfer Descriptor object.
+ * @td_list: Used for binding TD with ep_ring->td_list.
+ * @preq: Request associated with this TD
+ * @start_seg: Segment containing the first_trb in TD.
+ * @first_trb: First TRB for this TD.
+ * @last_trb: Last TRB related with TD.
+ * @bounce_seg: Bounce segment for this TD.
+ * @request_length_set: actual_length of the request has already been set.
+ * @drbl - TD has been added to HW scheduler - only for stream capable
+ *         endpoints.
+ */
+struct cdnsp_td {
+	struct list_head td_list;
+	struct cdnsp_request *preq;
+	struct cdnsp_segment *start_seg;
+	union cdnsp_trb *first_trb;
+	union cdnsp_trb *last_trb;
+	struct cdnsp_segment *bounce_seg;
+	bool request_length_set;
+	bool drbl;
+};
+
+/**
+ * struct cdnsp_dequeue_state - New dequeue pointer for Transfer Ring.
+ * @new_deq_seg: New dequeue segment.
+ * @new_deq_ptr: New dequeue pointer.
+ * @new_cycle_state: New cycle state.
+ * @stream_id: stream id for which new dequeue pointer has been selected.
+ */
+struct cdnsp_dequeue_state {
+	struct cdnsp_segment *new_deq_seg;
+	union cdnsp_trb *new_deq_ptr;
+	int new_cycle_state;
+	unsigned int stream_id;
+};
+
+enum cdnsp_ring_type {
+	TYPE_CTRL = 0,
+	TYPE_ISOC,
+	TYPE_BULK,
+	TYPE_INTR,
+	TYPE_STREAM,
+	TYPE_COMMAND,
+	TYPE_EVENT,
+};
+
+/**
+ * struct cdnsp_ring - information describing transfer, command or event ring.
+ * @first_seg: First segment on transfer ring.
+ * @last_seg: Last segment on transfer ring.
+ * @enqueue: SW enqueue pointer address.
+ * @enq_seg: SW enqueue segment address.
+ * @dequeue: SW dequeue pointer address.
+ * @deq_seg: SW dequeue segment address.
+ * @td_list: transfer descriptor list associated with this ring.
+ * @cycle_state: Current cycle bit. Write the cycle state into the TRB cycle
+ *               field to give ownership of the TRB to the device controller
+ *               (if we are the producer) or to check if we own the TRB
+ *               (if we are the consumer).
+ * @stream_id: Stream id
+ * @stream_active: Stream is active - PRIME packet has been detected.
+ * @stream_rejected: This ring has been rejected by host.
+ * @num_tds: Number of TDs associated with ring.
+ * @num_segs: Number of segments.
+ * @num_trbs_free: Number of free TRBs on the ring.
+ * @bounce_buf_len: Length of bounce buffer.
+ * @type: Ring type - event, transfer, or command ring.
+ * @last_td_was_short - TD is short TD.
+ * @trb_address_map: For mapping physical TRB addresses to segments in
+ *                   stream rings.
+ */
+struct cdnsp_ring {
+	struct cdnsp_segment *first_seg;
+	struct cdnsp_segment *last_seg;
+	union cdnsp_trb	 *enqueue;
+	struct cdnsp_segment *enq_seg;
+	union cdnsp_trb	 *dequeue;
+	struct cdnsp_segment *deq_seg;
+	struct list_head td_list;
+	u32 cycle_state;
+	unsigned int stream_id;
+	unsigned int stream_active;
+	unsigned int stream_rejected;
+	int num_tds;
+	unsigned int num_segs;
+	unsigned int num_trbs_free;
+	unsigned int bounce_buf_len;
+	enum cdnsp_ring_type type;
+	bool last_td_was_short;
+	struct radix_tree_root *trb_address_map;
+};
+
+/**
+ * struct cdnsp_erst_entry - even ring segment table entry object.
+ * @seg_addr: 64-bit event ring segment address.
+ * seg_size: Number of TRBs in segment.;
+ */
+struct cdnsp_erst_entry {
+	__le64 seg_addr;
+	__le32 seg_size;
+	/* Set to zero */
+	__le32 rsvd;
+};
+
+/**
+ * struct cdnsp_erst - even ring segment table for event ring.
+ * @entries: Array of event ring segments
+ * @num_entries: Number of segments in entries array.
+ * @erst_dma_addr: DMA address for entries array.
+ */
+struct cdnsp_erst {
+	struct cdnsp_erst_entry *entries;
+	unsigned int num_entries;
+	dma_addr_t erst_dma_addr;
+};
+
+/**
+ * struct cdnsp_request - extended device side representation of usb_request
+ *                        object .
+ * @td: Transfer descriptor associated with this request.
+ * @request: Generic usb_request object describing single I/O request.
+ * @list: Used to adding request to endpoint pending_list.
+ * @pep: Extended representation of usb_ep object
+ * @epnum: Endpoint number associated with usb request.
+ * @direction: Endpoint direction for usb request.
+ */
+struct cdnsp_request {
+	struct	cdnsp_td td;
+	struct usb_request request;
+	struct list_head list;
+	struct cdnsp_ep	 *pep;
+	u8 epnum;
+	unsigned direction:1;
+};
+
+#define	ERST_NUM_SEGS	1
+
+/* Stages used during enumeration process.*/
+enum cdnsp_ep0_stage {
+	CDNSP_SETUP_STAGE,
+	CDNSP_DATA_STAGE,
+	CDNSP_STATUS_STAGE,
+};
+
+/**
+ * struct cdnsp_port - holds information about detected ports.
+ * @port_num: Port number.
+ * @exist: Indicate if port exist.
+ * maj_rev: Major revision.
+ * min_rev: Minor revision.
+ */
+struct cdnsp_port {
+	struct cdnsp_port_regs __iomem *regs;
+	u8 port_num;
+	u8 exist;
+	u8 maj_rev;
+	u8 min_rev;
+};
+
+#define CDNSP_EXT_PORT_MAJOR(x)		(((x) >> 24) & 0xff)
+#define CDNSP_EXT_PORT_MINOR(x)		(((x) >> 16) & 0xff)
+#define CDNSP_EXT_PORT_OFF(x)		((x) & 0xff)
+#define CDNSP_EXT_PORT_COUNT(x)		(((x) >> 8) & 0xff)
+
+/**
+ * struct cdnsp_device - represent USB device.
+ * @dev: Pointer to device structure associated whit this controller.
+ * @gadget: Device side representation of the peripheral controller.
+ * @gadget_driver: Pointer to the gadget driver.
+ * @irq: IRQ line number used by device side.
+ * @regs:IO device memory.
+ * @cap_regs: Capability registers.
+ * @op_regs: Operational registers.
+ * @run_regs: Runtime registers.
+ * @dba: Device base address register.
+ * @ir_set: Current interrupter register set.
+ * @port20_regs: Port 2.0 Peripheral Configuration Registers.
+ * @port3x_regs: USB3.x Port Peripheral Configuration Registers.
+ * @rev_cap: Controller Capabilities Registers.
+ * @hcs_params1: Cached register copies of read-only HCSPARAMS1
+ * @hcc_params: Cached register copies of read-only HCCPARAMS1
+ * @rtl_revision: Cached controller rtl revision.
+ * @setup: Temporary buffer for setup packet.
+ * @ep0_preq: Internal allocated request used during enumeration.
+ * @ep0_stage: ep0 stage during enumeration process.
+ * @three_stage_setup: Three state or two state setup.
+ * @ep0_expect_in: Data IN expected for control transfer.
+ * @setup_id: Setup identifier.
+ * @setup_speed - Speed detected for current SETUP packet.
+ * @setup_buf: Buffer for SETUP packet.
+ * @device_address: Current device address.
+ * @may_wakeup: remote wakeup enabled/disabled.
+ * @lock: Lock used in interrupt thread context.
+ * @hci_version: device controller version.
+ * @dcbaa: Device context base address array.
+ * @cmd_ring: Command ring.
+ * @cmd: Represent all what is needed to issue command on Command Ring.
+ * @event_ring: Event ring.
+ * @erst: Event Ring Segment table
+ * @slot_id: Current Slot ID. Should be 0 or 1.
+ * @out_ctx: Output context.
+ * @in_ctx: Input context.
+ * @eps: array of endpoints object associated with device.
+ * @usb2_hw_lpm_capable: hardware lpm is enabled;
+ * @u1_allowed: Allow device transition to U1 state.
+ * @u2_allowed: Allow device transition to U2 state
+ * @device_pool: DMA pool for allocating input and output context.
+ * @segment_pool: DMA pool for allocating new segments.
+ * @cdnsp_state: Current state of controller.
+ * @link_state: Current link state.
+ * @usb2_port - Port USB 2.0.
+ * @usb3_port - Port USB 3.0.
+ * @active_port - Current selected Port.
+ * @test_mode: selected Test Mode.
+ */
+struct cdnsp_device {
+	struct device *dev;
+	struct usb_gadget gadget;
+	struct usb_gadget_driver *gadget_driver;
+	unsigned int irq;
+	void __iomem *regs;
+
+	/* Registers map */
+	struct cdnsp_cap_regs __iomem *cap_regs;
+	struct cdnsp_op_regs __iomem *op_regs;
+	struct cdnsp_run_regs __iomem *run_regs;
+	struct cdnsp_doorbell_array __iomem *dba;
+	struct	cdnsp_intr_reg __iomem *ir_set;
+	struct cdnsp_20port_cap __iomem *port20_regs;
+	struct cdnsp_3xport_cap __iomem *port3x_regs;
+	struct cdnsp_rev_cap __iomem *rev_cap;
+
+	/* Cached register copies of read-only CDNSP data */
+	__u32 hcs_params1;
+	__u32 hcs_params3;
+	__u32 hcc_params;
+	#define RTL_REVISION_NEW_LPM 0x2700
+	__u32 rtl_revision;
+	/* Lock used in interrupt thread context. */
+	spinlock_t lock;
+	struct usb_ctrlrequest setup;
+	struct cdnsp_request ep0_preq;
+	enum cdnsp_ep0_stage ep0_stage;
+	u8 three_stage_setup;
+	u8 ep0_expect_in;
+	u8 setup_id;
+	u8 setup_speed;
+	void *setup_buf;
+	u8 device_address;
+	int may_wakeup;
+	u16 hci_version;
+
+	/* data structures */
+	struct cdnsp_device_context_array *dcbaa;
+	struct cdnsp_ring *cmd_ring;
+	struct cdnsp_command cmd;
+	struct cdnsp_ring *event_ring;
+	struct cdnsp_erst erst;
+	int slot_id;
+
+	/*
+	 * Commands to the hardware are passed an "input context" that
+	 * tells the hardware what to change in its data structures.
+	 * The hardware will return changes in an "output context" that
+	 * software must allocate for the hardware. .
+	 */
+	struct cdnsp_container_ctx out_ctx;
+	struct cdnsp_container_ctx in_ctx;
+	struct cdnsp_ep eps[CDNSP_ENDPOINTS_NUM];
+	u8 usb2_hw_lpm_capable:1;
+	u8 u1_allowed:1;
+	u8 u2_allowed:1;
+
+	/* DMA pools */
+	struct dma_pool *device_pool;
+	struct dma_pool	*segment_pool;
+
+#define CDNSP_STATE_HALTED		BIT(1)
+#define CDNSP_STATE_DYING		BIT(2)
+#define CDNSP_STATE_DISCONNECT_PENDING	BIT(3)
+#define CDNSP_WAKEUP_PENDING		BIT(4)
+	unsigned int cdnsp_state;
+	unsigned int link_state;
+
+	struct cdnsp_port usb2_port;
+	struct cdnsp_port eusb_port;
+	struct cdnsp_port usb3_port;
+	struct cdnsp_port *active_port;
+	u16 test_mode;
+};
+
+/*
+ * Registers should always be accessed with double word or quad word accesses.
+ *
+ * Registers with 64-bit address pointers should be written to with
+ * dword accesses by writing the low dword first (ptr[0]), then the high dword
+ * (ptr[1]) second. controller implementations that do not support 64-bit
+ * address pointers will ignore the high dword, and write order is irrelevant.
+ */
+static inline u64 cdnsp_read_64(__le64 __iomem *regs)
+{
+	return lo_hi_readq(regs);
+}
+
+static inline void cdnsp_write_64(const u64 val, __le64 __iomem *regs)
+{
+	lo_hi_writeq(val, regs);
+}
+
+/* CDNSP memory management functions. */
+void cdnsp_mem_cleanup(struct cdnsp_device *pdev);
+int cdnsp_mem_init(struct cdnsp_device *pdev);
+int cdnsp_setup_addressable_priv_dev(struct cdnsp_device *pdev);
+void cdnsp_copy_ep0_dequeue_into_input_ctx(struct cdnsp_device *pdev);
+void cdnsp_endpoint_zero(struct cdnsp_device *pdev, struct cdnsp_ep *ep);
+int cdnsp_endpoint_init(struct cdnsp_device *pdev,
+			struct cdnsp_ep *pep,
+			gfp_t mem_flags);
+int cdnsp_ring_expansion(struct cdnsp_device *pdev,
+			 struct cdnsp_ring *ring,
+			 unsigned int num_trbs, gfp_t flags);
+struct cdnsp_ring *cdnsp_dma_to_transfer_ring(struct cdnsp_ep *ep, u64 address);
+int cdnsp_alloc_stream_info(struct cdnsp_device *pdev,
+			    struct cdnsp_ep *pep,
+			    unsigned int num_stream_ctxs,
+			    unsigned int num_streams);
+int cdnsp_alloc_streams(struct cdnsp_device *pdev, struct cdnsp_ep *pep);
+void cdnsp_free_endpoint_rings(struct cdnsp_device *pdev, struct cdnsp_ep *pep);
+
+/* Device controller glue. */
+int cdnsp_find_next_ext_cap(void __iomem *base, u32 start, int id);
+int cdnsp_halt(struct cdnsp_device *pdev);
+void cdnsp_died(struct cdnsp_device *pdev);
+int cdnsp_reset(struct cdnsp_device *pdev);
+irqreturn_t cdnsp_irq_handler(int irq, void *priv);
+int cdnsp_setup_device(struct cdnsp_device *pdev, enum cdnsp_setup_dev setup);
+void cdnsp_set_usb2_hardware_lpm(struct cdnsp_device *usbsssp_data,
+				 struct usb_request *req, int enable);
+irqreturn_t cdnsp_thread_irq_handler(int irq, void *data);
+
+/* Ring, segment, TRB, and TD functions. */
+dma_addr_t cdnsp_trb_virt_to_dma(struct cdnsp_segment *seg,
+				 union cdnsp_trb *trb);
+bool cdnsp_last_trb_on_seg(struct cdnsp_segment *seg, union cdnsp_trb *trb);
+bool cdnsp_last_trb_on_ring(struct cdnsp_ring *ring,
+			    struct cdnsp_segment *seg,
+			    union cdnsp_trb *trb);
+int cdnsp_wait_for_cmd_compl(struct cdnsp_device *pdev);
+void cdnsp_update_erst_dequeue(struct cdnsp_device *pdev,
+			       union cdnsp_trb *event_ring_deq,
+			       u8 clear_ehb);
+void cdnsp_initialize_ring_info(struct cdnsp_ring *ring);
+void cdnsp_ring_cmd_db(struct cdnsp_device *pdev);
+void cdnsp_queue_slot_control(struct cdnsp_device *pdev, u32 trb_type);
+void cdnsp_queue_address_device(struct cdnsp_device *pdev,
+				dma_addr_t in_ctx_ptr,
+				enum cdnsp_setup_dev setup);
+void cdnsp_queue_stop_endpoint(struct cdnsp_device *pdev,
+			       unsigned int ep_index);
+int cdnsp_queue_ctrl_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq);
+int cdnsp_queue_bulk_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq);
+int cdnsp_queue_isoc_tx(struct cdnsp_device *pdev,
+			struct cdnsp_request *preq);
+void cdnsp_queue_configure_endpoint(struct cdnsp_device *pdev,
+				    dma_addr_t in_ctx_ptr);
+void cdnsp_queue_reset_ep(struct cdnsp_device *pdev, unsigned int ep_index);
+void cdnsp_queue_halt_endpoint(struct cdnsp_device *pdev,
+			       unsigned int ep_index);
+void cdnsp_force_header_wakeup(struct cdnsp_device *pdev, int intf_num);
+void cdnsp_queue_reset_device(struct cdnsp_device *pdev);
+void cdnsp_queue_new_dequeue_state(struct cdnsp_device *pdev,
+				   struct cdnsp_ep *pep,
+				   struct cdnsp_dequeue_state *deq_state);
+void cdnsp_ring_doorbell_for_active_rings(struct cdnsp_device *pdev,
+					  struct cdnsp_ep *pep);
+void cdnsp_inc_deq(struct cdnsp_device *pdev, struct cdnsp_ring *ring);
+void cdnsp_set_link_state(struct cdnsp_device *pdev,
+			  __le32 __iomem *port_regs, u32 link_state);
+u32 cdnsp_port_state_to_neutral(u32 state);
+
+/* CDNSP device controller contexts. */
+int cdnsp_enable_slot(struct cdnsp_device *pdev);
+int cdnsp_disable_slot(struct cdnsp_device *pdev);
+struct cdnsp_input_control_ctx
+	*cdnsp_get_input_control_ctx(struct cdnsp_container_ctx *ctx);
+struct cdnsp_slot_ctx *cdnsp_get_slot_ctx(struct cdnsp_container_ctx *ctx);
+struct cdnsp_ep_ctx *cdnsp_get_ep_ctx(struct cdnsp_container_ctx *ctx,
+				      unsigned int ep_index);
+/* CDNSP gadget interface. */
+void cdnsp_suspend_gadget(struct cdnsp_device *pdev);
+void cdnsp_resume_gadget(struct cdnsp_device *pdev);
+void cdnsp_disconnect_gadget(struct cdnsp_device *pdev);
+void cdnsp_gadget_giveback(struct cdnsp_ep *pep, struct cdnsp_request *preq,
+			   int status);
+int cdnsp_ep_enqueue(struct cdnsp_ep *pep, struct cdnsp_request *preq);
+int cdnsp_ep_dequeue(struct cdnsp_ep *pep, struct cdnsp_request *preq);
+unsigned int cdnsp_port_speed(unsigned int port_status);
+void cdnsp_irq_reset(struct cdnsp_device *pdev);
+int cdnsp_halt_endpoint(struct cdnsp_device *pdev,
+			struct cdnsp_ep *pep, int value);
+int cdnsp_cmd_stop_ep(struct cdnsp_device *pdev, struct cdnsp_ep *pep);
+void cdnsp_setup_analyze(struct cdnsp_device *pdev);
+int cdnsp_status_stage(struct cdnsp_device *pdev);
+int cdnsp_reset_device(struct cdnsp_device *pdev);
+
+/**
+ * next_request - gets the next request on the given list
+ * @list: the request list to operate on
+ *
+ * Caller should take care of locking. This function return NULL or the first
+ * request available on list.
+ */
+static inline struct cdnsp_request *next_request(struct list_head *list)
+{
+	return list_first_entry_or_null(list, struct cdnsp_request, list);
+}
+
+#define to_cdnsp_ep(ep) (container_of(ep, struct cdnsp_ep, endpoint))
+#define gadget_to_cdnsp(g) (container_of(g, struct cdnsp_device, gadget))
+#define request_to_cdnsp_request(r) (container_of(r, struct cdnsp_request, \
+				     request))
+#define to_cdnsp_request(r) (container_of(r, struct cdnsp_request, request))
+int cdnsp_remove_request(struct cdnsp_device *pdev, struct cdnsp_request *preq,
+			 struct cdnsp_ep *pep);
+
+#endif /* __LINUX_CDNSP_GADGET_H */
diff --git a/drivers/usb/cdns3/cdnsp-mem.c b/drivers/usb/cdns3/cdnsp-mem.c
new file mode 100644
index 000000000..83f3384b7
--- /dev/null
+++ b/drivers/usb/cdns3/cdnsp-mem.c
@@ -0,0 +1,1365 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence CDNSP DRD Driver.
+ *
+ * Copyright (C) 2020 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ *
+ * Code based on Linux XHCI driver.
+ * Origin: Copyright (C) 2008 Intel Corp.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include "cdnsp-gadget.h"
+#include "cdnsp-trace.h"
+
+static void cdnsp_free_stream_info(struct cdnsp_device *pdev,
+				   struct cdnsp_ep *pep);
+/*
+ * Allocates a generic ring segment from the ring pool, sets the dma address,
+ * initializes the segment to zero, and sets the private next pointer to NULL.
+ *
+ * "All components of all Command and Transfer TRBs shall be initialized to '0'"
+ */
+static struct cdnsp_segment *cdnsp_segment_alloc(struct cdnsp_device *pdev,
+						 unsigned int cycle_state,
+						 unsigned int max_packet,
+						 gfp_t flags)
+{
+	struct cdnsp_segment *seg;
+	dma_addr_t dma;
+	int i;
+
+	seg = kzalloc_obj(*seg, flags);
+	if (!seg)
+		return NULL;
+
+	seg->trbs = dma_pool_zalloc(pdev->segment_pool, flags, &dma);
+	if (!seg->trbs) {
+		kfree(seg);
+		return NULL;
+	}
+
+	if (max_packet) {
+		seg->bounce_buf = kzalloc(max_packet, flags | GFP_DMA);
+		if (!seg->bounce_buf)
+			goto free_dma;
+	}
+
+	/* If the cycle state is 0, set the cycle bit to 1 for all the TRBs. */
+	if (cycle_state == 0) {
+		for (i = 0; i < TRBS_PER_SEGMENT; i++)
+			seg->trbs[i].link.control |= cpu_to_le32(TRB_CYCLE);
+	}
+	seg->dma = dma;
+	seg->next = NULL;
+
+	return seg;
+
+free_dma:
+	dma_pool_free(pdev->segment_pool, seg->trbs, dma);
+	kfree(seg);
+
+	return NULL;
+}
+
+static void cdnsp_segment_free(struct cdnsp_device *pdev,
+			       struct cdnsp_segment *seg)
+{
+	if (seg->trbs)
+		dma_pool_free(pdev->segment_pool, seg->trbs, seg->dma);
+
+	kfree(seg->bounce_buf);
+	kfree(seg);
+}
+
+static void cdnsp_free_segments_for_ring(struct cdnsp_device *pdev,
+					 struct cdnsp_segment *first)
+{
+	struct cdnsp_segment *seg;
+
+	seg = first->next;
+
+	while (seg != first) {
+		struct cdnsp_segment *next = seg->next;
+
+		cdnsp_segment_free(pdev, seg);
+		seg = next;
+	}
+
+	cdnsp_segment_free(pdev, first);
+}
+
+/*
+ * Make the prev segment point to the next segment.
+ *
+ * Change the last TRB in the prev segment to be a Link TRB which points to the
+ * DMA address of the next segment. The caller needs to set any Link TRB
+ * related flags, such as End TRB, Toggle Cycle, and no snoop.
+ */
+static void cdnsp_link_segments(struct cdnsp_device *pdev,
+				struct cdnsp_segment *prev,
+				struct cdnsp_segment *next,
+				enum cdnsp_ring_type type)
+{
+	struct cdnsp_link_trb *link;
+	u32 val;
+
+	if (!prev || !next)
+		return;
+
+	prev->next = next;
+	if (type != TYPE_EVENT) {
+		link = &prev->trbs[TRBS_PER_SEGMENT - 1].link;
+		link->segment_ptr = cpu_to_le64(next->dma);
+
+		/*
+		 * Set the last TRB in the segment to have a TRB type ID
+		 * of Link TRB
+		 */
+		val = le32_to_cpu(link->control);
+		val &= ~TRB_TYPE_BITMASK;
+		val |= TRB_TYPE(TRB_LINK);
+		link->control = cpu_to_le32(val);
+	}
+}
+
+/*
+ * Link the ring to the new segments.
+ * Set Toggle Cycle for the new ring if needed.
+ */
+static void cdnsp_link_rings(struct cdnsp_device *pdev,
+			     struct cdnsp_ring *ring,
+			     struct cdnsp_segment *first,
+			     struct cdnsp_segment *last,
+			     unsigned int num_segs)
+{
+	struct cdnsp_segment *next;
+
+	if (!ring || !first || !last)
+		return;
+
+	next = ring->enq_seg->next;
+	cdnsp_link_segments(pdev, ring->enq_seg, first, ring->type);
+	cdnsp_link_segments(pdev, last, next, ring->type);
+	ring->num_segs += num_segs;
+	ring->num_trbs_free += (TRBS_PER_SEGMENT - 1) * num_segs;
+
+	if (ring->type != TYPE_EVENT && ring->enq_seg == ring->last_seg) {
+		ring->last_seg->trbs[TRBS_PER_SEGMENT - 1].link.control &=
+			~cpu_to_le32(LINK_TOGGLE);
+		last->trbs[TRBS_PER_SEGMENT - 1].link.control |=
+			cpu_to_le32(LINK_TOGGLE);
+		ring->last_seg = last;
+	}
+}
+
+/*
+ * We need a radix tree for mapping physical addresses of TRBs to which stream
+ * ID they belong to. We need to do this because the device controller won't
+ * tell us which stream ring the TRB came from. We could store the stream ID
+ * in an event data TRB, but that doesn't help us for the cancellation case,
+ * since the endpoint may stop before it reaches that event data TRB.
+ *
+ * The radix tree maps the upper portion of the TRB DMA address to a ring
+ * segment that has the same upper portion of DMA addresses. For example,
+ * say I have segments of size 1KB, that are always 1KB aligned. A segment may
+ * start at 0x10c91000 and end at 0x10c913f0. If I use the upper 10 bits, the
+ * key to the stream ID is 0x43244. I can use the DMA address of the TRB to
+ * pass the radix tree a key to get the right stream ID:
+ *
+ *	0x10c90fff >> 10 = 0x43243
+ *	0x10c912c0 >> 10 = 0x43244
+ *	0x10c91400 >> 10 = 0x43245
+ *
+ * Obviously, only those TRBs with DMA addresses that are within the segment
+ * will make the radix tree return the stream ID for that ring.
+ *
+ * Caveats for the radix tree:
+ *
+ * The radix tree uses an unsigned long as a key pair. On 32-bit systems, an
+ * unsigned long will be 32-bits; on a 64-bit system an unsigned long will be
+ * 64-bits. Since we only request 32-bit DMA addresses, we can use that as the
+ * key on 32-bit or 64-bit systems (it would also be fine if we asked for 64-bit
+ * PCI DMA addresses on a 64-bit system). There might be a problem on 32-bit
+ * extended systems (where the DMA address can be bigger than 32-bits),
+ * if we allow the PCI dma mask to be bigger than 32-bits. So don't do that.
+ */
+static int cdnsp_insert_segment_mapping(struct radix_tree_root *trb_address_map,
+					struct cdnsp_ring *ring,
+					struct cdnsp_segment *seg,
+					gfp_t mem_flags)
+{
+	unsigned long key;
+	int ret;
+
+	key = (unsigned long)(seg->dma >> TRB_SEGMENT_SHIFT);
+
+	/* Skip any segments that were already added. */
+	if (radix_tree_lookup(trb_address_map, key))
+		return 0;
+
+	ret = radix_tree_maybe_preload(mem_flags);
+	if (ret)
+		return ret;
+
+	ret = radix_tree_insert(trb_address_map, key, ring);
+	radix_tree_preload_end();
+
+	return ret;
+}
+
+static void cdnsp_remove_segment_mapping(struct radix_tree_root *trb_address_map,
+					 struct cdnsp_segment *seg)
+{
+	unsigned long key;
+
+	key = (unsigned long)(seg->dma >> TRB_SEGMENT_SHIFT);
+	if (radix_tree_lookup(trb_address_map, key))
+		radix_tree_delete(trb_address_map, key);
+}
+
+static int cdnsp_update_stream_segment_mapping(struct radix_tree_root *trb_address_map,
+					       struct cdnsp_ring *ring,
+					       struct cdnsp_segment *first_seg,
+					       struct cdnsp_segment *last_seg,
+					       gfp_t mem_flags)
+{
+	struct cdnsp_segment *failed_seg;
+	struct cdnsp_segment *seg;
+	int ret;
+
+	seg = first_seg;
+	do {
+		ret = cdnsp_insert_segment_mapping(trb_address_map, ring, seg,
+						   mem_flags);
+		if (ret)
+			goto remove_streams;
+		if (seg == last_seg)
+			return 0;
+		seg = seg->next;
+	} while (seg != first_seg);
+
+	return 0;
+
+remove_streams:
+	failed_seg = seg;
+	seg = first_seg;
+	do {
+		cdnsp_remove_segment_mapping(trb_address_map, seg);
+		if (seg == failed_seg)
+			return ret;
+		seg = seg->next;
+	} while (seg != first_seg);
+
+	return ret;
+}
+
+static void cdnsp_remove_stream_mapping(struct cdnsp_ring *ring)
+{
+	struct cdnsp_segment *seg;
+
+	seg = ring->first_seg;
+	do {
+		cdnsp_remove_segment_mapping(ring->trb_address_map, seg);
+		seg = seg->next;
+	} while (seg != ring->first_seg);
+}
+
+static int cdnsp_update_stream_mapping(struct cdnsp_ring *ring)
+{
+	return cdnsp_update_stream_segment_mapping(ring->trb_address_map, ring,
+			ring->first_seg, ring->last_seg, GFP_ATOMIC);
+}
+
+static void cdnsp_ring_free(struct cdnsp_device *pdev, struct cdnsp_ring *ring)
+{
+	if (!ring)
+		return;
+
+	trace_cdnsp_ring_free(ring);
+
+	if (ring->first_seg) {
+		if (ring->type == TYPE_STREAM)
+			cdnsp_remove_stream_mapping(ring);
+
+		cdnsp_free_segments_for_ring(pdev, ring->first_seg);
+	}
+
+	kfree(ring);
+}
+
+void cdnsp_initialize_ring_info(struct cdnsp_ring *ring)
+{
+	ring->enqueue = ring->first_seg->trbs;
+	ring->enq_seg = ring->first_seg;
+	ring->dequeue = ring->enqueue;
+	ring->deq_seg = ring->first_seg;
+
+	/*
+	 * The ring is initialized to 0. The producer must write 1 to the cycle
+	 * bit to handover ownership of the TRB, so PCS = 1. The consumer must
+	 * compare CCS to the cycle bit to check ownership, so CCS = 1.
+	 *
+	 * New rings are initialized with cycle state equal to 1; if we are
+	 * handling ring expansion, set the cycle state equal to the old ring.
+	 */
+	ring->cycle_state = 1;
+
+	/*
+	 * Each segment has a link TRB, and leave an extra TRB for SW
+	 * accounting purpose
+	 */
+	ring->num_trbs_free = ring->num_segs * (TRBS_PER_SEGMENT - 1) - 1;
+}
+
+/* Allocate segments and link them for a ring. */
+static int cdnsp_alloc_segments_for_ring(struct cdnsp_device *pdev,
+					 struct cdnsp_segment **first,
+					 struct cdnsp_segment **last,
+					 unsigned int num_segs,
+					 unsigned int cycle_state,
+					 enum cdnsp_ring_type type,
+					 unsigned int max_packet,
+					 gfp_t flags)
+{
+	struct cdnsp_segment *prev;
+
+	/* Allocate first segment. */
+	prev = cdnsp_segment_alloc(pdev, cycle_state, max_packet, flags);
+	if (!prev)
+		return -ENOMEM;
+
+	num_segs--;
+	*first = prev;
+
+	/* Allocate all other segments. */
+	while (num_segs > 0) {
+		struct cdnsp_segment	*next;
+
+		next = cdnsp_segment_alloc(pdev, cycle_state,
+					   max_packet, flags);
+		if (!next) {
+			cdnsp_free_segments_for_ring(pdev, *first);
+			return -ENOMEM;
+		}
+
+		cdnsp_link_segments(pdev, prev, next, type);
+
+		prev = next;
+		num_segs--;
+	}
+
+	cdnsp_link_segments(pdev, prev, *first, type);
+	*last = prev;
+
+	return 0;
+}
+
+/*
+ * Create a new ring with zero or more segments.
+ *
+ * Link each segment together into a ring.
+ * Set the end flag and the cycle toggle bit on the last segment.
+ */
+static struct cdnsp_ring *cdnsp_ring_alloc(struct cdnsp_device *pdev,
+					   unsigned int num_segs,
+					   enum cdnsp_ring_type type,
+					   unsigned int max_packet,
+					   gfp_t flags)
+{
+	struct cdnsp_ring *ring;
+	int ret;
+
+	ring = kzalloc_obj(*(ring), flags);
+	if (!ring)
+		return NULL;
+
+	ring->num_segs = num_segs;
+	ring->bounce_buf_len = max_packet;
+	INIT_LIST_HEAD(&ring->td_list);
+	ring->type = type;
+
+	if (num_segs == 0)
+		return ring;
+
+	ret = cdnsp_alloc_segments_for_ring(pdev, &ring->first_seg,
+					    &ring->last_seg, num_segs,
+					    1, type, max_packet, flags);
+	if (ret)
+		goto fail;
+
+	/* Only event ring does not use link TRB. */
+	if (type != TYPE_EVENT)
+		ring->last_seg->trbs[TRBS_PER_SEGMENT - 1].link.control |=
+			cpu_to_le32(LINK_TOGGLE);
+
+	cdnsp_initialize_ring_info(ring);
+	trace_cdnsp_ring_alloc(ring);
+	return ring;
+fail:
+	kfree(ring);
+	return NULL;
+}
+
+void cdnsp_free_endpoint_rings(struct cdnsp_device *pdev, struct cdnsp_ep *pep)
+{
+	cdnsp_ring_free(pdev, pep->ring);
+	pep->ring = NULL;
+	cdnsp_free_stream_info(pdev, pep);
+}
+
+/*
+ * Expand an existing ring.
+ * Allocate a new ring which has same segment numbers and link the two rings.
+ */
+int cdnsp_ring_expansion(struct cdnsp_device *pdev,
+			 struct cdnsp_ring *ring,
+			 unsigned int num_trbs,
+			 gfp_t flags)
+{
+	unsigned int num_segs_needed;
+	struct cdnsp_segment *first;
+	struct cdnsp_segment *last;
+	unsigned int num_segs;
+	int ret;
+
+	num_segs_needed = (num_trbs + (TRBS_PER_SEGMENT - 1) - 1) /
+			(TRBS_PER_SEGMENT - 1);
+
+	/* Allocate number of segments we needed, or double the ring size. */
+	num_segs = max(ring->num_segs, num_segs_needed);
+
+	ret = cdnsp_alloc_segments_for_ring(pdev, &first, &last, num_segs,
+					    ring->cycle_state, ring->type,
+					    ring->bounce_buf_len, flags);
+	if (ret)
+		return -ENOMEM;
+
+	if (ring->type == TYPE_STREAM)
+		ret = cdnsp_update_stream_segment_mapping(ring->trb_address_map,
+							  ring, first,
+							  last, flags);
+
+	if (ret) {
+		cdnsp_free_segments_for_ring(pdev, first);
+
+		return ret;
+	}
+
+	cdnsp_link_rings(pdev, ring, first, last, num_segs);
+	trace_cdnsp_ring_expansion(ring);
+
+	return 0;
+}
+
+static int cdnsp_init_device_ctx(struct cdnsp_device *pdev)
+{
+	int size = HCC_64BYTE_CONTEXT(pdev->hcc_params) ? 2048 : 1024;
+
+	pdev->out_ctx.type = CDNSP_CTX_TYPE_DEVICE;
+	pdev->out_ctx.size = size;
+	pdev->out_ctx.ctx_size = CTX_SIZE(pdev->hcc_params);
+	pdev->out_ctx.bytes = dma_pool_zalloc(pdev->device_pool, GFP_ATOMIC,
+					      &pdev->out_ctx.dma);
+
+	if (!pdev->out_ctx.bytes)
+		return -ENOMEM;
+
+	pdev->in_ctx.type = CDNSP_CTX_TYPE_INPUT;
+	pdev->in_ctx.ctx_size = pdev->out_ctx.ctx_size;
+	pdev->in_ctx.size = size + pdev->out_ctx.ctx_size;
+	pdev->in_ctx.bytes = dma_pool_zalloc(pdev->device_pool, GFP_ATOMIC,
+					     &pdev->in_ctx.dma);
+
+	if (!pdev->in_ctx.bytes) {
+		dma_pool_free(pdev->device_pool, pdev->out_ctx.bytes,
+			      pdev->out_ctx.dma);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+struct cdnsp_input_control_ctx
+	*cdnsp_get_input_control_ctx(struct cdnsp_container_ctx *ctx)
+{
+	if (ctx->type != CDNSP_CTX_TYPE_INPUT)
+		return NULL;
+
+	return (struct cdnsp_input_control_ctx *)ctx->bytes;
+}
+
+struct cdnsp_slot_ctx *cdnsp_get_slot_ctx(struct cdnsp_container_ctx *ctx)
+{
+	if (ctx->type == CDNSP_CTX_TYPE_DEVICE)
+		return (struct cdnsp_slot_ctx *)ctx->bytes;
+
+	return (struct cdnsp_slot_ctx *)(ctx->bytes + ctx->ctx_size);
+}
+
+struct cdnsp_ep_ctx *cdnsp_get_ep_ctx(struct cdnsp_container_ctx *ctx,
+				      unsigned int ep_index)
+{
+	/* Increment ep index by offset of start of ep ctx array. */
+	ep_index++;
+	if (ctx->type == CDNSP_CTX_TYPE_INPUT)
+		ep_index++;
+
+	return (struct cdnsp_ep_ctx *)(ctx->bytes + (ep_index * ctx->ctx_size));
+}
+
+static void cdnsp_free_stream_ctx(struct cdnsp_device *pdev,
+				  struct cdnsp_ep *pep)
+{
+	dma_pool_free(pdev->device_pool, pep->stream_info.stream_ctx_array,
+		      pep->stream_info.ctx_array_dma);
+}
+
+/* The stream context array must be a power of 2. */
+static struct cdnsp_stream_ctx
+	*cdnsp_alloc_stream_ctx(struct cdnsp_device *pdev, struct cdnsp_ep *pep)
+{
+	size_t size = sizeof(struct cdnsp_stream_ctx) *
+		      pep->stream_info.num_stream_ctxs;
+
+	if (size > CDNSP_CTX_SIZE)
+		return NULL;
+
+	/**
+	 * Driver uses intentionally the device_pool to allocated stream
+	 * context array. Device Pool has 2048 bytes of size what gives us
+	 * 128 entries.
+	 */
+	return dma_pool_zalloc(pdev->device_pool, GFP_DMA32 | GFP_ATOMIC,
+			       &pep->stream_info.ctx_array_dma);
+}
+
+struct cdnsp_ring *cdnsp_dma_to_transfer_ring(struct cdnsp_ep *pep, u64 address)
+{
+	if (pep->ep_state & EP_HAS_STREAMS)
+		return radix_tree_lookup(&pep->stream_info.trb_address_map,
+					 address >> TRB_SEGMENT_SHIFT);
+
+	return pep->ring;
+}
+
+/*
+ * Change an endpoint's internal structure so it supports stream IDs.
+ * The number of requested streams includes stream 0, which cannot be used by
+ * driver.
+ *
+ * The number of stream contexts in the stream context array may be bigger than
+ * the number of streams the driver wants to use. This is because the number of
+ * stream context array entries must be a power of two.
+ */
+int cdnsp_alloc_stream_info(struct cdnsp_device *pdev,
+			    struct cdnsp_ep *pep,
+			    unsigned int num_stream_ctxs,
+			    unsigned int num_streams)
+{
+	struct cdnsp_stream_info *stream_info;
+	struct cdnsp_ring *cur_ring;
+	u32 cur_stream;
+	u64 addr;
+	int ret;
+	int mps;
+
+	stream_info = &pep->stream_info;
+	stream_info->num_streams = num_streams;
+	stream_info->num_stream_ctxs = num_stream_ctxs;
+
+	/* Initialize the array of virtual pointers to stream rings. */
+	stream_info->stream_rings = kzalloc_objs(struct cdnsp_ring *,
+						 num_streams, GFP_ATOMIC);
+	if (!stream_info->stream_rings)
+		return -ENOMEM;
+
+	/* Initialize the array of DMA addresses for stream rings for the HW. */
+	stream_info->stream_ctx_array = cdnsp_alloc_stream_ctx(pdev, pep);
+	if (!stream_info->stream_ctx_array)
+		goto cleanup_stream_rings;
+
+	memset(stream_info->stream_ctx_array, 0,
+	       sizeof(struct cdnsp_stream_ctx) * num_stream_ctxs);
+	INIT_RADIX_TREE(&stream_info->trb_address_map, GFP_ATOMIC);
+	mps = usb_endpoint_maxp(pep->endpoint.desc);
+
+	/*
+	 * Allocate rings for all the streams that the driver will use,
+	 * and add their segment DMA addresses to the radix tree.
+	 * Stream 0 is reserved.
+	 */
+	for (cur_stream = 1; cur_stream < num_streams; cur_stream++) {
+		cur_ring = cdnsp_ring_alloc(pdev, 2, TYPE_STREAM, mps,
+					    GFP_ATOMIC);
+		stream_info->stream_rings[cur_stream] = cur_ring;
+
+		if (!cur_ring)
+			goto cleanup_rings;
+
+		cur_ring->stream_id = cur_stream;
+		cur_ring->trb_address_map = &stream_info->trb_address_map;
+
+		/* Set deq ptr, cycle bit, and stream context type. */
+		addr = cur_ring->first_seg->dma | SCT_FOR_CTX(SCT_PRI_TR) |
+		       cur_ring->cycle_state;
+
+		stream_info->stream_ctx_array[cur_stream].stream_ring =
+			cpu_to_le64(addr);
+
+		trace_cdnsp_set_stream_ring(cur_ring);
+
+		ret = cdnsp_update_stream_mapping(cur_ring);
+		if (ret)
+			goto cleanup_rings;
+	}
+
+	return 0;
+
+cleanup_rings:
+	for (cur_stream = 1; cur_stream < num_streams; cur_stream++) {
+		cur_ring = stream_info->stream_rings[cur_stream];
+		if (cur_ring) {
+			cdnsp_ring_free(pdev, cur_ring);
+			stream_info->stream_rings[cur_stream] = NULL;
+		}
+	}
+
+	cdnsp_free_stream_ctx(pdev, pep);
+
+cleanup_stream_rings:
+	kfree(pep->stream_info.stream_rings);
+
+	return -ENOMEM;
+}
+
+/* Frees all stream contexts associated with the endpoint. */
+static void cdnsp_free_stream_info(struct cdnsp_device *pdev,
+				   struct cdnsp_ep *pep)
+{
+	struct cdnsp_stream_info *stream_info = &pep->stream_info;
+	struct cdnsp_ring *cur_ring;
+	int cur_stream;
+
+	if (!(pep->ep_state & EP_HAS_STREAMS))
+		return;
+
+	for (cur_stream = 1; cur_stream < stream_info->num_streams;
+	     cur_stream++) {
+		cur_ring = stream_info->stream_rings[cur_stream];
+		if (cur_ring) {
+			cdnsp_ring_free(pdev, cur_ring);
+			stream_info->stream_rings[cur_stream] = NULL;
+		}
+	}
+
+	if (stream_info->stream_ctx_array)
+		cdnsp_free_stream_ctx(pdev, pep);
+
+	kfree(stream_info->stream_rings);
+	pep->ep_state &= ~EP_HAS_STREAMS;
+}
+
+/* All the cdnsp_tds in the ring's TD list should be freed at this point.*/
+static void cdnsp_free_priv_device(struct cdnsp_device *pdev)
+{
+	pdev->dcbaa->dev_context_ptrs[1] = 0;
+
+	cdnsp_free_endpoint_rings(pdev, &pdev->eps[0]);
+
+	if (pdev->in_ctx.bytes)
+		dma_pool_free(pdev->device_pool, pdev->in_ctx.bytes,
+			      pdev->in_ctx.dma);
+
+	if (pdev->out_ctx.bytes)
+		dma_pool_free(pdev->device_pool, pdev->out_ctx.bytes,
+			      pdev->out_ctx.dma);
+
+	pdev->in_ctx.bytes = NULL;
+	pdev->out_ctx.bytes = NULL;
+}
+
+static int cdnsp_alloc_priv_device(struct cdnsp_device *pdev)
+{
+	int ret;
+
+	ret = cdnsp_init_device_ctx(pdev);
+	if (ret)
+		return ret;
+
+	/* Allocate endpoint 0 ring. */
+	pdev->eps[0].ring = cdnsp_ring_alloc(pdev, 2, TYPE_CTRL, 0, GFP_ATOMIC);
+	if (!pdev->eps[0].ring)
+		goto fail;
+
+	/* Point to output device context in dcbaa. */
+	pdev->dcbaa->dev_context_ptrs[1] = cpu_to_le64(pdev->out_ctx.dma);
+	pdev->cmd.in_ctx = &pdev->in_ctx;
+
+	trace_cdnsp_alloc_priv_device(pdev);
+	return 0;
+fail:
+	dma_pool_free(pdev->device_pool, pdev->out_ctx.bytes,
+		      pdev->out_ctx.dma);
+	dma_pool_free(pdev->device_pool, pdev->in_ctx.bytes,
+		      pdev->in_ctx.dma);
+
+	return ret;
+}
+
+void cdnsp_copy_ep0_dequeue_into_input_ctx(struct cdnsp_device *pdev)
+{
+	struct cdnsp_ep_ctx *ep0_ctx = pdev->eps[0].in_ctx;
+	struct cdnsp_ring *ep_ring = pdev->eps[0].ring;
+	dma_addr_t dma;
+
+	dma = cdnsp_trb_virt_to_dma(ep_ring->enq_seg, ep_ring->enqueue);
+	ep0_ctx->deq = cpu_to_le64(dma | ep_ring->cycle_state);
+}
+
+/* Setup an controller private device for a Set Address command. */
+int cdnsp_setup_addressable_priv_dev(struct cdnsp_device *pdev)
+{
+	struct cdnsp_slot_ctx *slot_ctx;
+	struct cdnsp_ep_ctx *ep0_ctx;
+	u32 max_packets, port;
+
+	ep0_ctx = cdnsp_get_ep_ctx(&pdev->in_ctx, 0);
+	slot_ctx = cdnsp_get_slot_ctx(&pdev->in_ctx);
+
+	/* Only the control endpoint is valid - one endpoint context. */
+	slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1));
+
+	switch (pdev->gadget.speed) {
+	case USB_SPEED_SUPER_PLUS:
+		slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_SSP);
+		max_packets = MAX_PACKET(512);
+		break;
+	case USB_SPEED_SUPER:
+		slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_SS);
+		max_packets = MAX_PACKET(512);
+		break;
+	case USB_SPEED_HIGH:
+		slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_HS);
+		max_packets = MAX_PACKET(64);
+		break;
+	case USB_SPEED_FULL:
+		slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_FS);
+		max_packets = MAX_PACKET(64);
+		break;
+	default:
+		/* Speed was not set , this shouldn't happen. */
+		return -EINVAL;
+	}
+
+	port = DEV_PORT(pdev->active_port->port_num);
+	slot_ctx->dev_port |= cpu_to_le32(port);
+	slot_ctx->dev_state = cpu_to_le32((pdev->device_address &
+					   DEV_ADDR_MASK));
+	ep0_ctx->tx_info = cpu_to_le32(EP_AVG_TRB_LENGTH(0x8));
+	ep0_ctx->ep_info2 = cpu_to_le32(EP_TYPE(CTRL_EP));
+	ep0_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(0) | ERROR_COUNT(3) |
+					 max_packets);
+
+	ep0_ctx->deq = cpu_to_le64(pdev->eps[0].ring->first_seg->dma |
+				   pdev->eps[0].ring->cycle_state);
+
+	trace_cdnsp_setup_addressable_priv_device(pdev);
+
+	return 0;
+}
+
+/*
+ * Convert interval expressed as 2^(bInterval - 1) == interval into
+ * straight exponent value 2^n == interval.
+ */
+static unsigned int cdnsp_parse_exponent_interval(struct usb_gadget *g,
+						  struct cdnsp_ep *pep)
+{
+	unsigned int interval;
+
+	interval = clamp_val(pep->endpoint.desc->bInterval, 1, 16) - 1;
+	if (interval != pep->endpoint.desc->bInterval - 1)
+		dev_warn(&g->dev, "ep %s - rounding interval to %d %sframes\n",
+			 pep->name, 1 << interval,
+			 g->speed == USB_SPEED_FULL ? "" : "micro");
+
+	/*
+	 * Full speed isoc endpoints specify interval in frames,
+	 * not microframes. We are using microframes everywhere,
+	 * so adjust accordingly.
+	 */
+	if (g->speed == USB_SPEED_FULL)
+		interval += 3;	/* 1 frame = 2^3 uframes */
+
+	/* Controller handles only up to 512ms (2^12). */
+	if (interval > 12)
+		interval = 12;
+
+	return interval;
+}
+
+/*
+ * Convert bInterval expressed in microframes (in 1-255 range) to exponent of
+ * microframes, rounded down to nearest power of 2.
+ */
+static unsigned int cdnsp_microframes_to_exponent(struct usb_gadget *g,
+						  struct cdnsp_ep *pep,
+						  unsigned int desc_interval,
+						  unsigned int min_exponent,
+						  unsigned int max_exponent)
+{
+	unsigned int interval;
+
+	interval = fls(desc_interval) - 1;
+	return clamp_val(interval, min_exponent, max_exponent);
+}
+
+/*
+ * Return the polling interval.
+ *
+ * The polling interval is expressed in "microframes". If controllers's Interval
+ * field is set to N, it will service the endpoint every 2^(Interval)*125us.
+ */
+static unsigned int cdnsp_get_endpoint_interval(struct usb_gadget *g,
+						struct cdnsp_ep *pep)
+{
+	unsigned int interval = 0;
+
+	switch (g->speed) {
+	case USB_SPEED_HIGH:
+	case USB_SPEED_SUPER_PLUS:
+	case USB_SPEED_SUPER:
+		if (usb_endpoint_xfer_int(pep->endpoint.desc) ||
+		    usb_endpoint_xfer_isoc(pep->endpoint.desc))
+			interval = cdnsp_parse_exponent_interval(g, pep);
+		break;
+	case USB_SPEED_FULL:
+		if (usb_endpoint_xfer_isoc(pep->endpoint.desc)) {
+			interval = cdnsp_parse_exponent_interval(g, pep);
+		} else if (usb_endpoint_xfer_int(pep->endpoint.desc)) {
+			interval = pep->endpoint.desc->bInterval << 3;
+			interval = cdnsp_microframes_to_exponent(g, pep,
+								 interval,
+								 3, 10);
+		}
+
+		break;
+	default:
+		WARN_ON(1);
+	}
+
+	return interval;
+}
+
+/*
+ * The "Mult" field in the endpoint context is only set for SuperSpeed isoc eps.
+ * High speed endpoint descriptors can define "the number of additional
+ * transaction opportunities per microframe", but that goes in the Max Burst
+ * endpoint context field.
+ */
+static u32 cdnsp_get_endpoint_mult(struct usb_gadget *g, struct cdnsp_ep *pep)
+{
+	if (g->speed < USB_SPEED_SUPER ||
+	    !usb_endpoint_xfer_isoc(pep->endpoint.desc))
+		return 0;
+
+	return pep->endpoint.comp_desc->bmAttributes;
+}
+
+static u32 cdnsp_get_endpoint_max_burst(struct usb_gadget *g,
+					struct cdnsp_ep *pep)
+{
+	/* Super speed and Plus have max burst in ep companion desc */
+	if (g->speed >= USB_SPEED_SUPER)
+		return pep->endpoint.comp_desc->bMaxBurst;
+
+	if (g->speed == USB_SPEED_HIGH &&
+	    (usb_endpoint_xfer_isoc(pep->endpoint.desc) ||
+	     usb_endpoint_xfer_int(pep->endpoint.desc)))
+		return usb_endpoint_maxp_mult(pep->endpoint.desc) - 1;
+
+	return 0;
+}
+
+static u32 cdnsp_get_endpoint_type(const struct usb_endpoint_descriptor *desc)
+{
+	int in;
+
+	in = usb_endpoint_dir_in(desc);
+
+	switch (usb_endpoint_type(desc)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		return CTRL_EP;
+	case USB_ENDPOINT_XFER_BULK:
+		return in ? BULK_IN_EP : BULK_OUT_EP;
+	case USB_ENDPOINT_XFER_ISOC:
+		return in ? ISOC_IN_EP : ISOC_OUT_EP;
+	case USB_ENDPOINT_XFER_INT:
+		return in ? INT_IN_EP : INT_OUT_EP;
+	}
+
+	return 0;
+}
+
+/*
+ * Return the maximum endpoint service interval time (ESIT) payload.
+ * Basically, this is the maxpacket size, multiplied by the burst size
+ * and mult size.
+ */
+static u32 cdnsp_get_max_esit_payload(struct usb_gadget *g,
+				      struct cdnsp_ep *pep)
+{
+	int max_packet;
+	int max_burst;
+
+	/* Only applies for interrupt or isochronous endpoints*/
+	if (usb_endpoint_xfer_control(pep->endpoint.desc) ||
+	    usb_endpoint_xfer_bulk(pep->endpoint.desc))
+		return 0;
+
+	/* SuperSpeedPlus Isoc ep sending over 48k per EIST. */
+	if (g->speed >= USB_SPEED_SUPER_PLUS &&
+	    USB_SS_SSP_ISOC_COMP(pep->endpoint.desc->bmAttributes))
+		return le16_to_cpu(pep->endpoint.comp_desc->wBytesPerInterval);
+	/* SuperSpeed or SuperSpeedPlus Isoc ep with less than 48k per esit */
+	else if (g->speed >= USB_SPEED_SUPER)
+		return le16_to_cpu(pep->endpoint.comp_desc->wBytesPerInterval);
+
+	max_packet = usb_endpoint_maxp(pep->endpoint.desc);
+	max_burst = usb_endpoint_maxp_mult(pep->endpoint.desc);
+
+	/* A 0 in max burst means 1 transfer per ESIT */
+	return max_packet * max_burst;
+}
+
+int cdnsp_endpoint_init(struct cdnsp_device *pdev,
+			struct cdnsp_ep *pep,
+			gfp_t mem_flags)
+{
+	enum cdnsp_ring_type ring_type;
+	struct cdnsp_ep_ctx *ep_ctx;
+	unsigned int err_count = 0;
+	unsigned int avg_trb_len;
+	unsigned int max_packet;
+	unsigned int max_burst;
+	unsigned int interval;
+	u32 max_esit_payload;
+	unsigned int mult;
+	u32 endpoint_type;
+	int ret;
+
+	ep_ctx = pep->in_ctx;
+
+	endpoint_type = cdnsp_get_endpoint_type(pep->endpoint.desc);
+	if (!endpoint_type)
+		return -EINVAL;
+
+	ring_type = usb_endpoint_type(pep->endpoint.desc);
+
+	/*
+	 * Get values to fill the endpoint context, mostly from ep descriptor.
+	 * The average TRB buffer length for bulk endpoints is unclear as we
+	 * have no clue on scatter gather list entry size. For Isoc and Int,
+	 * set it to max available.
+	 */
+	max_esit_payload = cdnsp_get_max_esit_payload(&pdev->gadget, pep);
+	interval = cdnsp_get_endpoint_interval(&pdev->gadget, pep);
+	mult = cdnsp_get_endpoint_mult(&pdev->gadget, pep);
+	max_packet = usb_endpoint_maxp(pep->endpoint.desc);
+	max_burst = cdnsp_get_endpoint_max_burst(&pdev->gadget, pep);
+	avg_trb_len = max_esit_payload;
+
+	/* Allow 3 retries for everything but isoc, set CErr = 3. */
+	if (!usb_endpoint_xfer_isoc(pep->endpoint.desc))
+		err_count = 3;
+	if (usb_endpoint_xfer_bulk(pep->endpoint.desc) &&
+	    pdev->gadget.speed == USB_SPEED_HIGH)
+		max_packet = 512;
+	/* Controller spec indicates that ctrl ep avg TRB Length should be 8. */
+	if (usb_endpoint_xfer_control(pep->endpoint.desc))
+		avg_trb_len = 8;
+
+	/* Set up the endpoint ring. */
+	pep->ring = cdnsp_ring_alloc(pdev, 2, ring_type, max_packet, mem_flags);
+	if (!pep->ring)
+		return -ENOMEM;
+
+	pep->skip = false;
+
+	/* Fill the endpoint context */
+	ep_ctx->ep_info = cpu_to_le32(EP_MAX_ESIT_PAYLOAD_HI(max_esit_payload) |
+				EP_INTERVAL(interval) | EP_MULT(mult));
+	ep_ctx->ep_info2 = cpu_to_le32(EP_TYPE(endpoint_type) |
+				MAX_PACKET(max_packet) | MAX_BURST(max_burst) |
+				ERROR_COUNT(err_count));
+	ep_ctx->deq = cpu_to_le64(pep->ring->first_seg->dma |
+				  pep->ring->cycle_state);
+
+	ep_ctx->tx_info = cpu_to_le32(EP_MAX_ESIT_PAYLOAD_LO(max_esit_payload) |
+				EP_AVG_TRB_LENGTH(avg_trb_len));
+
+	if (usb_endpoint_xfer_bulk(pep->endpoint.desc) &&
+	    pdev->gadget.speed > USB_SPEED_HIGH) {
+		ret = cdnsp_alloc_streams(pdev, pep);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+void cdnsp_endpoint_zero(struct cdnsp_device *pdev, struct cdnsp_ep *pep)
+{
+	pep->in_ctx->ep_info = 0;
+	pep->in_ctx->ep_info2 = 0;
+	pep->in_ctx->deq = 0;
+	pep->in_ctx->tx_info = 0;
+}
+
+static int cdnsp_alloc_erst(struct cdnsp_device *pdev,
+			    struct cdnsp_ring *evt_ring,
+			    struct cdnsp_erst *erst)
+{
+	struct cdnsp_erst_entry *entry;
+	struct cdnsp_segment *seg;
+	unsigned int val;
+	size_t size;
+
+	size = sizeof(struct cdnsp_erst_entry) * evt_ring->num_segs;
+	erst->entries = dma_alloc_coherent(pdev->dev, size,
+					   &erst->erst_dma_addr, GFP_KERNEL);
+	if (!erst->entries)
+		return -ENOMEM;
+
+	erst->num_entries = evt_ring->num_segs;
+
+	seg = evt_ring->first_seg;
+	for (val = 0; val < evt_ring->num_segs; val++) {
+		entry = &erst->entries[val];
+		entry->seg_addr = cpu_to_le64(seg->dma);
+		entry->seg_size = cpu_to_le32(TRBS_PER_SEGMENT);
+		entry->rsvd = 0;
+		seg = seg->next;
+	}
+
+	return 0;
+}
+
+static void cdnsp_free_erst(struct cdnsp_device *pdev, struct cdnsp_erst *erst)
+{
+	size_t size = sizeof(struct cdnsp_erst_entry) * (erst->num_entries);
+	struct device *dev = pdev->dev;
+
+	if (erst->entries)
+		dma_free_coherent(dev, size, erst->entries,
+				  erst->erst_dma_addr);
+
+	erst->entries = NULL;
+}
+
+void cdnsp_mem_cleanup(struct cdnsp_device *pdev)
+{
+	struct device *dev = pdev->dev;
+
+	cdnsp_free_priv_device(pdev);
+	cdnsp_free_erst(pdev, &pdev->erst);
+
+	if (pdev->event_ring)
+		cdnsp_ring_free(pdev, pdev->event_ring);
+
+	pdev->event_ring = NULL;
+
+	if (pdev->cmd_ring)
+		cdnsp_ring_free(pdev, pdev->cmd_ring);
+
+	pdev->cmd_ring = NULL;
+
+	dma_pool_destroy(pdev->segment_pool);
+	pdev->segment_pool = NULL;
+	dma_pool_destroy(pdev->device_pool);
+	pdev->device_pool = NULL;
+
+	dma_free_coherent(dev, sizeof(*pdev->dcbaa),
+			  pdev->dcbaa, pdev->dcbaa->dma);
+
+	pdev->dcbaa = NULL;
+	memset(&pdev->usb2_port, 0, sizeof(struct cdnsp_port));
+	memset(&pdev->eusb_port, 0, sizeof(struct cdnsp_port));
+	memset(&pdev->usb3_port, 0, sizeof(struct cdnsp_port));
+	pdev->active_port = NULL;
+}
+
+static void cdnsp_set_event_deq(struct cdnsp_device *pdev)
+{
+	dma_addr_t deq;
+	u64 temp;
+
+	deq = cdnsp_trb_virt_to_dma(pdev->event_ring->deq_seg,
+				    pdev->event_ring->dequeue);
+
+	/* Update controller event ring dequeue pointer */
+	temp = cdnsp_read_64(&pdev->ir_set->erst_dequeue);
+	temp &= ERST_PTR_MASK;
+
+	/*
+	 * Don't clear the EHB bit (which is RW1C) because
+	 * there might be more events to service.
+	 */
+	temp &= ~ERST_EHB;
+
+	cdnsp_write_64(((u64)deq & (u64)~ERST_PTR_MASK) | temp,
+		       &pdev->ir_set->erst_dequeue);
+}
+
+static void cdnsp_add_in_port(struct cdnsp_device *pdev,
+			      struct cdnsp_port *port,
+			      __le32 __iomem *addr)
+{
+	u32 temp, port_offset, port_count;
+
+	temp = readl(addr);
+	port->maj_rev = CDNSP_EXT_PORT_MAJOR(temp);
+	port->min_rev = CDNSP_EXT_PORT_MINOR(temp);
+
+	/* Port offset and count in the third dword.*/
+	temp = readl(addr + 2);
+	port_offset = CDNSP_EXT_PORT_OFF(temp);
+	port_count = CDNSP_EXT_PORT_COUNT(temp);
+
+	if (port == &pdev->eusb_port) {
+		/*
+		 * If controller has usb2 + eusb port then eusb is as
+		 * second port
+		 */
+		if (port_count == 2)
+			port_offset++;
+
+		if (port_count == 1 && pdev->usb2_port.exist)
+			return;
+	}
+
+	trace_cdnsp_port_info(addr, port_offset, port_count, port->maj_rev);
+
+	port->port_num = port_offset;
+	port->exist = 1;
+}
+
+/*
+ * Scan the Extended Capabilities for the "Supported Protocol Capabilities" that
+ * specify what speeds each port is supposed to be.
+ */
+static int cdnsp_setup_port_arrays(struct cdnsp_device *pdev)
+{
+	void __iomem *base;
+	u32 offset;
+	int i;
+
+	base = &pdev->cap_regs->hc_capbase;
+	offset = cdnsp_find_next_ext_cap(base, 0,
+					 EXT_CAP_CFG_DEV_20PORT_CAP_ID);
+	if (offset)
+		pdev->port20_regs = base + offset;
+
+	offset = 0;
+
+	/* Driver expects max 2 extended protocol capability. */
+	for (i = 0; i < 2; i++) {
+		u32 temp;
+
+		offset = cdnsp_find_next_ext_cap(base, offset,
+						 EXT_CAPS_PROTOCOL);
+		temp = readl(base + offset);
+
+		if (CDNSP_EXT_PORT_MAJOR(temp) == 0x03 &&
+		    !pdev->usb3_port.port_num)
+			cdnsp_add_in_port(pdev, &pdev->usb3_port,
+					  base + offset);
+
+		if (CDNSP_EXT_PORT_MAJOR(temp) == 0x02) {
+			if (!pdev->usb2_port.port_num && pdev->port20_regs)
+				cdnsp_add_in_port(pdev, &pdev->usb2_port,
+						  base + offset);
+
+			if (!pdev->eusb_port.port_num)
+				cdnsp_add_in_port(pdev, &pdev->eusb_port,
+						  base + offset);
+		}
+	}
+
+	if (!pdev->usb2_port.exist && !pdev->eusb_port.exist &&
+	    !pdev->usb3_port.exist) {
+		dev_err(pdev->dev, "Error: No port detected\n");
+		return -ENODEV;
+	}
+
+	if (pdev->usb2_port.exist) {
+		pdev->usb2_port.regs = (struct cdnsp_port_regs __iomem *)
+				       (&pdev->op_regs->port_reg_base + NUM_PORT_REGS *
+					(pdev->usb2_port.port_num - 1));
+		trace_cdnsp_init("Found USB 2.0 port.");
+	}
+
+	if (pdev->eusb_port.exist) {
+		pdev->eusb_port.regs = (struct cdnsp_port_regs __iomem *)
+				       (&pdev->op_regs->port_reg_base + NUM_PORT_REGS *
+					(pdev->eusb_port.port_num - 1));
+		trace_cdnsp_init("Found eUSB 2.0 port.");
+	}
+
+	if (pdev->usb3_port.exist) {
+		offset = cdnsp_find_next_ext_cap(base, 0, D_XEC_CFG_3XPORT_CAP);
+		pdev->port3x_regs =  base + offset;
+
+		pdev->usb3_port.regs = (struct cdnsp_port_regs __iomem *)
+				       (&pdev->op_regs->port_reg_base + NUM_PORT_REGS *
+					(pdev->usb3_port.port_num - 1));
+		trace_cdnsp_init("Found USB 3.x port.");
+	}
+
+	return 0;
+}
+
+/*
+ * Initialize memory for CDNSP (one-time init).
+ *
+ * Program the PAGESIZE register, initialize the device context array, create
+ * device contexts, set up a command ring segment, create event
+ * ring (one for now).
+ */
+int cdnsp_mem_init(struct cdnsp_device *pdev)
+{
+	struct device *dev = pdev->dev;
+	int ret = -ENOMEM;
+	unsigned int val;
+	dma_addr_t dma;
+	u32 page_size;
+	u64 val_64;
+
+	/*
+	 * Use 4K pages, since that's common and the minimum the
+	 * controller supports
+	 */
+	page_size = 1 << 12;
+
+	val = readl(&pdev->op_regs->config_reg);
+	val |= ((val & ~MAX_DEVS) | CDNSP_DEV_MAX_SLOTS) | CONFIG_U3E;
+	writel(val, &pdev->op_regs->config_reg);
+
+	/*
+	 * Doorbell array must be physically contiguous
+	 * and 64-byte (cache line) aligned.
+	 */
+	pdev->dcbaa = dma_alloc_coherent(dev, sizeof(*pdev->dcbaa),
+					 &dma, GFP_KERNEL);
+	if (!pdev->dcbaa)
+		return -ENOMEM;
+
+	pdev->dcbaa->dma = dma;
+
+	cdnsp_write_64(dma, &pdev->op_regs->dcbaa_ptr);
+
+	/*
+	 * Initialize the ring segment pool.  The ring must be a contiguous
+	 * structure comprised of TRBs. The TRBs must be 16 byte aligned,
+	 * however, the command ring segment needs 64-byte aligned segments
+	 * and our use of dma addresses in the trb_address_map radix tree needs
+	 * TRB_SEGMENT_SIZE alignment, so driver pick the greater alignment
+	 * need.
+	 */
+	pdev->segment_pool = dma_pool_create("CDNSP ring segments", dev,
+					     TRB_SEGMENT_SIZE, TRB_SEGMENT_SIZE,
+					     page_size);
+	if (!pdev->segment_pool)
+		goto release_dcbaa;
+
+	pdev->device_pool = dma_pool_create("CDNSP input/output contexts", dev,
+					    CDNSP_CTX_SIZE, 64, page_size);
+	if (!pdev->device_pool)
+		goto destroy_segment_pool;
+
+
+	/* Set up the command ring to have one segments for now. */
+	pdev->cmd_ring = cdnsp_ring_alloc(pdev, 1, TYPE_COMMAND, 0, GFP_KERNEL);
+	if (!pdev->cmd_ring)
+		goto destroy_device_pool;
+
+	/* Set the address in the Command Ring Control register */
+	val_64 = cdnsp_read_64(&pdev->op_regs->cmd_ring);
+	val_64 = (val_64 & (u64)CMD_RING_RSVD_BITS) |
+		 (pdev->cmd_ring->first_seg->dma & (u64)~CMD_RING_RSVD_BITS) |
+		 pdev->cmd_ring->cycle_state;
+	cdnsp_write_64(val_64, &pdev->op_regs->cmd_ring);
+
+	val = readl(&pdev->cap_regs->db_off);
+	val &= DBOFF_MASK;
+	pdev->dba = (void __iomem *)pdev->cap_regs + val;
+
+	/* Set ir_set to interrupt register set 0 */
+	pdev->ir_set = &pdev->run_regs->ir_set[0];
+
+	/*
+	 * Event ring setup: Allocate a normal ring, but also setup
+	 * the event ring segment table (ERST).
+	 */
+	pdev->event_ring = cdnsp_ring_alloc(pdev, ERST_NUM_SEGS, TYPE_EVENT,
+					    0, GFP_KERNEL);
+	if (!pdev->event_ring)
+		goto free_cmd_ring;
+
+	ret = cdnsp_alloc_erst(pdev, pdev->event_ring, &pdev->erst);
+	if (ret)
+		goto free_event_ring;
+
+	/* Set ERST count with the number of entries in the segment table. */
+	val = readl(&pdev->ir_set->erst_size);
+	val &= ERST_SIZE_MASK;
+	val |= ERST_NUM_SEGS;
+	writel(val, &pdev->ir_set->erst_size);
+
+	/* Set the segment table base address. */
+	val_64 = cdnsp_read_64(&pdev->ir_set->erst_base);
+	val_64 &= ERST_PTR_MASK;
+	val_64 |= (pdev->erst.erst_dma_addr & (u64)~ERST_PTR_MASK);
+	cdnsp_write_64(val_64, &pdev->ir_set->erst_base);
+
+	/* Set the event ring dequeue address. */
+	cdnsp_set_event_deq(pdev);
+
+	ret = cdnsp_setup_port_arrays(pdev);
+	if (ret)
+		goto free_erst;
+
+	ret = cdnsp_alloc_priv_device(pdev);
+	if (ret) {
+		dev_err(pdev->dev,
+			"Could not allocate cdnsp_device data structures\n");
+		goto free_erst;
+	}
+
+	return 0;
+
+free_erst:
+	cdnsp_free_erst(pdev, &pdev->erst);
+free_event_ring:
+	cdnsp_ring_free(pdev, pdev->event_ring);
+free_cmd_ring:
+	cdnsp_ring_free(pdev, pdev->cmd_ring);
+destroy_device_pool:
+	dma_pool_destroy(pdev->device_pool);
+destroy_segment_pool:
+	dma_pool_destroy(pdev->segment_pool);
+release_dcbaa:
+	dma_free_coherent(dev, sizeof(*pdev->dcbaa), pdev->dcbaa,
+			  pdev->dcbaa->dma);
+
+	cdnsp_reset(pdev);
+
+	return ret;
+}
diff --git a/drivers/usb/cdns3/cdnsp-pci.c b/drivers/usb/cdns3/cdnsp-pci.c
new file mode 100644
index 000000000..c38a3dc71
--- /dev/null
+++ b/drivers/usb/cdns3/cdnsp-pci.c
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence USBSSP PCI Glue driver.
+ *
+ * Copyright (C) 2019 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+
+#include "core.h"
+
+struct cdnsp_wrap {
+	struct platform_device *plat_dev;
+	struct property_entry prop[3];
+	struct resource dev_res[6];
+	int devfn;
+};
+
+#define RES_IRQ_HOST_ID		0
+#define RES_IRQ_PERIPHERAL_ID	1
+#define RES_IRQ_OTG_ID		2
+#define RES_HOST_ID		3
+#define RES_DEV_ID		4
+#define RES_DRD_ID		5
+/* DRD PCI configuration - 64-bit addressing */
+/* First PCI function */
+#define PCI_BAR_HOST		0
+#define PCI_BAR_DEV		2
+/* Second PCI function */
+#define PCI_BAR_OTG		0
+/* Device only PCI configuration - 32-bit addressing */
+/* First PCI function */
+#define PCI_BAR_ONLY_DEV	1
+
+#define PCI_DEV_FN_HOST_DEVICE	0
+#define PCI_DEV_FN_OTG		1
+
+#define PCI_DRIVER_NAME		"cdns-pci-usbssp"
+#define PLAT_DRIVER_NAME	"cdns-usb3"
+
+#define PCI_DEVICE_ID_CDNS_UDC_USBSSP   0x0400
+#define CHICKEN_APB_TIMEOUT_VALUE	0x1C20
+
+static struct pci_dev *cdnsp_get_second_fun(struct pci_dev *pdev)
+{
+	/*
+	 * Gets the second function.
+	 * Platform has two function. The first keeps resources for
+	 * Host/Device while the second keeps resources for DRD/OTG.
+	 */
+	if (pdev->device == PCI_DEVICE_ID_CDNS_USBSSP)
+		return pci_get_device(pdev->vendor, PCI_DEVICE_ID_CDNS_USBSS, NULL);
+	if (pdev->device == PCI_DEVICE_ID_CDNS_USBSS)
+		return pci_get_device(pdev->vendor, PCI_DEVICE_ID_CDNS_USBSSP, NULL);
+
+	return NULL;
+}
+
+static int cdnsp_pci_probe(struct pci_dev *pdev,
+			   const struct pci_device_id *id)
+{
+	struct platform_device_info plat_info;
+	static struct cdns3_platform_data pdata;
+	struct cdnsp_wrap *wrap;
+	struct resource *res;
+	struct pci_dev *func;
+	bool no_drd = false;
+	int ret = 0;
+
+	/*
+	 * For GADGET/HOST PCI (devfn) function number is 0,
+	 * for OTG PCI (devfn) function number is 1.
+	 */
+	if (!id || (pdev->devfn != PCI_DEV_FN_HOST_DEVICE &&
+		    pdev->devfn != PCI_DEV_FN_OTG))
+		return -EINVAL;
+
+	if (pdev->device == PCI_DEVICE_ID_CDNS_UDC_USBSSP)
+		no_drd = true;
+
+	func = cdnsp_get_second_fun(pdev);
+	if (!func && !no_drd)
+		return -EINVAL;
+
+	if ((func && func->class == PCI_CLASS_SERIAL_USB_XHCI) ||
+	    pdev->class == PCI_CLASS_SERIAL_USB_XHCI) {
+		ret = -EINVAL;
+		goto put_pci;
+	}
+
+	ret = pcim_enable_device(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "Enabling PCI device has failed %d\n", ret);
+		goto put_pci;
+	}
+
+	pci_set_master(pdev);
+
+	if (func && pci_is_enabled(func)) {
+		wrap = pci_get_drvdata(func);
+	} else {
+		wrap = kzalloc_obj(*wrap);
+		if (!wrap) {
+			ret = -ENOMEM;
+			goto put_pci;
+		}
+	}
+
+	res = wrap->dev_res;
+
+	if (pdev->devfn == PCI_DEV_FN_HOST_DEVICE) {
+		int bar_dev = no_drd ? PCI_BAR_ONLY_DEV : PCI_BAR_DEV;
+
+		/* Function 0: host(BAR_0) + device(BAR_2). */
+		dev_dbg(&pdev->dev, "Initialize Device resources\n");
+		res[RES_DEV_ID].start = pci_resource_start(pdev, bar_dev);
+		res[RES_DEV_ID].end = pci_resource_end(pdev, bar_dev);
+		res[RES_DEV_ID].name = "dev";
+		res[RES_DEV_ID].flags = IORESOURCE_MEM;
+		dev_dbg(&pdev->dev, "USBSSP-DEV physical base addr: %pa\n",
+			&res[RES_DEV_ID].start);
+
+		res[RES_HOST_ID].start = pci_resource_start(pdev, PCI_BAR_HOST);
+		res[RES_HOST_ID].end = pci_resource_end(pdev, PCI_BAR_HOST);
+		res[RES_HOST_ID].name = "xhci";
+		res[RES_HOST_ID].flags = IORESOURCE_MEM;
+		dev_dbg(&pdev->dev, "USBSSP-XHCI physical base addr: %pa\n",
+			&res[RES_HOST_ID].start);
+
+		/* Interrupt for XHCI */
+		wrap->dev_res[RES_IRQ_HOST_ID].start = pdev->irq;
+		wrap->dev_res[RES_IRQ_HOST_ID].name = "host";
+		wrap->dev_res[RES_IRQ_HOST_ID].flags = IORESOURCE_IRQ;
+
+		/* Interrupt for device. It's the same as for HOST. */
+		wrap->dev_res[RES_IRQ_PERIPHERAL_ID].start = pdev->irq;
+		wrap->dev_res[RES_IRQ_PERIPHERAL_ID].name = "peripheral";
+		wrap->dev_res[RES_IRQ_PERIPHERAL_ID].flags = IORESOURCE_IRQ;
+	} else {
+		res[RES_DRD_ID].start = pci_resource_start(pdev, PCI_BAR_OTG);
+		res[RES_DRD_ID].end = pci_resource_end(pdev, PCI_BAR_OTG);
+		res[RES_DRD_ID].name = "otg";
+		res[RES_DRD_ID].flags = IORESOURCE_MEM;
+		dev_dbg(&pdev->dev, "CDNSP-DRD physical base addr: %pa\n",
+			&res[RES_DRD_ID].start);
+
+		/* Interrupt for OTG/DRD. */
+		wrap->dev_res[RES_IRQ_OTG_ID].start = pdev->irq;
+		wrap->dev_res[RES_IRQ_OTG_ID].name = "otg";
+		wrap->dev_res[RES_IRQ_OTG_ID].flags = IORESOURCE_IRQ;
+	}
+
+	if (no_drd || pci_is_enabled(func)) {
+		u8 idx = 0;
+
+		/* set up platform device info */
+		pdata.override_apb_timeout = CHICKEN_APB_TIMEOUT_VALUE;
+
+		if (no_drd) {
+			wrap->prop[idx++] = PROPERTY_ENTRY_STRING("compatible",
+								  "cdns,cdnsp");
+			wrap->prop[idx++] = PROPERTY_ENTRY_STRING("dr_mode", "peripheral");
+		} else {
+			wrap->prop[idx++] = PROPERTY_ENTRY_STRING("dr_mode", "otg");
+			wrap->prop[idx++] = PROPERTY_ENTRY_BOOL("usb-role-switch");
+		}
+
+		memset(&plat_info, 0, sizeof(plat_info));
+		plat_info.parent = &pdev->dev;
+		plat_info.fwnode = pdev->dev.fwnode;
+		plat_info.name = PLAT_DRIVER_NAME;
+		plat_info.id = pdev->devfn;
+		plat_info.res = wrap->dev_res;
+		plat_info.num_res = ARRAY_SIZE(wrap->dev_res);
+		plat_info.dma_mask = pdev->dma_mask;
+		plat_info.data = &pdata;
+		plat_info.size_data = sizeof(pdata);
+		plat_info.properties = wrap->prop;
+		wrap->devfn = pdev->devfn;
+		/* register platform device */
+		wrap->plat_dev = platform_device_register_full(&plat_info);
+		if (IS_ERR(wrap->plat_dev)) {
+			ret = PTR_ERR(wrap->plat_dev);
+			kfree(wrap);
+			goto put_pci;
+		}
+	}
+
+	pci_set_drvdata(pdev, wrap);
+put_pci:
+	pci_dev_put(func);
+	return ret;
+}
+
+static void cdnsp_pci_remove(struct pci_dev *pdev)
+{
+	struct cdnsp_wrap *wrap;
+	struct pci_dev *func;
+
+	func = cdnsp_get_second_fun(pdev);
+	wrap = pci_get_drvdata(pdev);
+
+	if (wrap->devfn == pdev->devfn)
+		platform_device_unregister(wrap->plat_dev);
+
+	if (!func || !pci_is_enabled(func))
+		kfree(wrap);
+
+	pci_dev_put(func);
+}
+
+static const struct pci_device_id cdnsp_pci_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_CDNS, PCI_DEVICE_ID_CDNS_UDC_USBSSP),
+	  .class = PCI_CLASS_SERIAL_USB_DEVICE },
+	{ PCI_DEVICE(PCI_VENDOR_ID_CDNS, PCI_DEVICE_ID_CDNS_UDC_USBSSP),
+	  .class = PCI_CLASS_SERIAL_USB_CDNS },
+	{ PCI_DEVICE(PCI_VENDOR_ID_CDNS, PCI_DEVICE_ID_CDNS_USBSSP),
+	  .class = PCI_CLASS_SERIAL_USB_DEVICE },
+	{ PCI_DEVICE(PCI_VENDOR_ID_CDNS, PCI_DEVICE_ID_CDNS_USBSSP),
+	  .class = PCI_CLASS_SERIAL_USB_CDNS },
+	{ PCI_DEVICE(PCI_VENDOR_ID_CDNS, PCI_DEVICE_ID_CDNS_USBSS),
+	  .class = PCI_CLASS_SERIAL_USB_CDNS },
+	{ 0, }
+};
+
+static struct pci_driver cdnsp_pci_driver = {
+	.name = PCI_DRIVER_NAME,
+	.id_table = cdnsp_pci_ids,
+	.probe = cdnsp_pci_probe,
+	.remove = cdnsp_pci_remove,
+};
+
+module_pci_driver(cdnsp_pci_driver);
+MODULE_DEVICE_TABLE(pci, cdnsp_pci_ids);
+
+MODULE_ALIAS("pci:cdnsp");
+MODULE_AUTHOR("Pawel Laszczak <pawell@cadence.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Cadence CDNSP PCI wrapper");
diff --git a/drivers/usb/cdns3/cdnsp-ring.c b/drivers/usb/cdns3/cdnsp-ring.c
new file mode 100644
index 000000000..715658c98
--- /dev/null
+++ b/drivers/usb/cdns3/cdnsp-ring.c
@@ -0,0 +1,2507 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence CDNSP DRD Driver.
+ *
+ * Copyright (C) 2020 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ *
+ * Code based on Linux XHCI driver.
+ * Origin: Copyright (C) 2008 Intel Corp
+ */
+
+/*
+ * Ring initialization rules:
+ * 1. Each segment is initialized to zero, except for link TRBs.
+ * 2. Ring cycle state = 0. This represents Producer Cycle State (PCS) or
+ *    Consumer Cycle State (CCS), depending on ring function.
+ * 3. Enqueue pointer = dequeue pointer = address of first TRB in the segment.
+ *
+ * Ring behavior rules:
+ * 1. A ring is empty if enqueue == dequeue. This means there will always be at
+ *    least one free TRB in the ring. This is useful if you want to turn that
+ *    into a link TRB and expand the ring.
+ * 2. When incrementing an enqueue or dequeue pointer, if the next TRB is a
+ *    link TRB, then load the pointer with the address in the link TRB. If the
+ *    link TRB had its toggle bit set, you may need to update the ring cycle
+ *    state (see cycle bit rules). You may have to do this multiple times
+ *    until you reach a non-link TRB.
+ * 3. A ring is full if enqueue++ (for the definition of increment above)
+ *    equals the dequeue pointer.
+ *
+ * Cycle bit rules:
+ * 1. When a consumer increments a dequeue pointer and encounters a toggle bit
+ *    in a link TRB, it must toggle the ring cycle state.
+ * 2. When a producer increments an enqueue pointer and encounters a toggle bit
+ *    in a link TRB, it must toggle the ring cycle state.
+ *
+ * Producer rules:
+ * 1. Check if ring is full before you enqueue.
+ * 2. Write the ring cycle state to the cycle bit in the TRB you're enqueuing.
+ *    Update enqueue pointer between each write (which may update the ring
+ *    cycle state).
+ * 3. Notify consumer. If SW is producer, it rings the doorbell for command
+ *    and endpoint rings. If controller is the producer for the event ring,
+ *    and it generates an interrupt according to interrupt modulation rules.
+ *
+ * Consumer rules:
+ * 1. Check if TRB belongs to you. If the cycle bit == your ring cycle state,
+ *    the TRB is owned by the consumer.
+ * 2. Update dequeue pointer (which may update the ring cycle state) and
+ *    continue processing TRBs until you reach a TRB which is not owned by you.
+ * 3. Notify the producer. SW is the consumer for the event ring, and it
+ *    updates event ring dequeue pointer. Controller is the consumer for the
+ *    command and endpoint rings; it generates events on the event ring
+ *    for these.
+ */
+
+#include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+
+#include "cdnsp-trace.h"
+#include "cdnsp-gadget.h"
+
+/*
+ * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA
+ * address of the TRB.
+ */
+dma_addr_t cdnsp_trb_virt_to_dma(struct cdnsp_segment *seg,
+				 union cdnsp_trb *trb)
+{
+	unsigned long segment_offset = trb - seg->trbs;
+
+	if (trb < seg->trbs || segment_offset >= TRBS_PER_SEGMENT)
+		return 0;
+
+	return seg->dma + (segment_offset * sizeof(*trb));
+}
+
+static bool cdnsp_trb_is_noop(union cdnsp_trb *trb)
+{
+	return TRB_TYPE_NOOP_LE32(trb->generic.field[3]);
+}
+
+static bool cdnsp_trb_is_link(union cdnsp_trb *trb)
+{
+	return TRB_TYPE_LINK_LE32(trb->link.control);
+}
+
+bool cdnsp_last_trb_on_seg(struct cdnsp_segment *seg, union cdnsp_trb *trb)
+{
+	return trb == &seg->trbs[TRBS_PER_SEGMENT - 1];
+}
+
+bool cdnsp_last_trb_on_ring(struct cdnsp_ring *ring,
+			    struct cdnsp_segment *seg,
+			    union cdnsp_trb *trb)
+{
+	return cdnsp_last_trb_on_seg(seg, trb) && (seg->next == ring->first_seg);
+}
+
+static bool cdnsp_link_trb_toggles_cycle(union cdnsp_trb *trb)
+{
+	return le32_to_cpu(trb->link.control) & LINK_TOGGLE;
+}
+
+static void cdnsp_trb_to_noop(union cdnsp_trb *trb, u32 noop_type)
+{
+	if (cdnsp_trb_is_link(trb)) {
+		/* Unchain chained link TRBs. */
+		trb->link.control &= cpu_to_le32(~TRB_CHAIN);
+	} else {
+		trb->generic.field[0] = 0;
+		trb->generic.field[1] = 0;
+		trb->generic.field[2] = 0;
+		/* Preserve only the cycle bit of this TRB. */
+		trb->generic.field[3] &= cpu_to_le32(TRB_CYCLE);
+		trb->generic.field[3] |= cpu_to_le32(TRB_TYPE(noop_type));
+	}
+}
+
+/*
+ * Updates trb to point to the next TRB in the ring, and updates seg if the next
+ * TRB is in a new segment. This does not skip over link TRBs, and it does not
+ * effect the ring dequeue or enqueue pointers.
+ */
+static void cdnsp_next_trb(struct cdnsp_device *pdev,
+			   struct cdnsp_ring *ring,
+			   struct cdnsp_segment **seg,
+			   union cdnsp_trb **trb)
+{
+	if (cdnsp_trb_is_link(*trb)) {
+		*seg = (*seg)->next;
+		*trb = ((*seg)->trbs);
+	} else {
+		(*trb)++;
+	}
+}
+
+/*
+ * See Cycle bit rules. SW is the consumer for the event ring only.
+ * Don't make a ring full of link TRBs. That would be dumb and this would loop.
+ */
+void cdnsp_inc_deq(struct cdnsp_device *pdev, struct cdnsp_ring *ring)
+{
+	/* event ring doesn't have link trbs, check for last trb. */
+	if (ring->type == TYPE_EVENT) {
+		if (!cdnsp_last_trb_on_seg(ring->deq_seg, ring->dequeue)) {
+			ring->dequeue++;
+			goto out;
+		}
+
+		if (cdnsp_last_trb_on_ring(ring, ring->deq_seg, ring->dequeue))
+			ring->cycle_state ^= 1;
+
+		ring->deq_seg = ring->deq_seg->next;
+		ring->dequeue = ring->deq_seg->trbs;
+		goto out;
+	}
+
+	/* All other rings have link trbs. */
+	if (!cdnsp_trb_is_link(ring->dequeue)) {
+		ring->dequeue++;
+		ring->num_trbs_free++;
+	}
+	while (cdnsp_trb_is_link(ring->dequeue)) {
+		ring->deq_seg = ring->deq_seg->next;
+		ring->dequeue = ring->deq_seg->trbs;
+	}
+out:
+	trace_cdnsp_inc_deq(ring);
+}
+
+/*
+ * See Cycle bit rules. SW is the consumer for the event ring only.
+ * Don't make a ring full of link TRBs. That would be dumb and this would loop.
+ *
+ * If we've just enqueued a TRB that is in the middle of a TD (meaning the
+ * chain bit is set), then set the chain bit in all the following link TRBs.
+ * If we've enqueued the last TRB in a TD, make sure the following link TRBs
+ * have their chain bit cleared (so that each Link TRB is a separate TD).
+ *
+ * @more_trbs_coming:	Will you enqueue more TRBs before ringing the doorbell.
+ */
+static void cdnsp_inc_enq(struct cdnsp_device *pdev,
+			  struct cdnsp_ring *ring,
+			  bool more_trbs_coming)
+{
+	union cdnsp_trb *next;
+	u32 chain;
+
+	chain = le32_to_cpu(ring->enqueue->generic.field[3]) & TRB_CHAIN;
+
+	/* If this is not event ring, there is one less usable TRB. */
+	if (!cdnsp_trb_is_link(ring->enqueue))
+		ring->num_trbs_free--;
+	next = ++(ring->enqueue);
+
+	/* Update the dequeue pointer further if that was a link TRB */
+	while (cdnsp_trb_is_link(next)) {
+		/*
+		 * If the caller doesn't plan on enqueuing more TDs before
+		 * ringing the doorbell, then we don't want to give the link TRB
+		 * to the hardware just yet. We'll give the link TRB back in
+		 * cdnsp_prepare_ring() just before we enqueue the TD at the
+		 * top of the ring.
+		 */
+		if (!chain && !more_trbs_coming)
+			break;
+
+		next->link.control &= cpu_to_le32(~TRB_CHAIN);
+		next->link.control |= cpu_to_le32(chain);
+
+		/* Give this link TRB to the hardware */
+		wmb();
+		next->link.control ^= cpu_to_le32(TRB_CYCLE);
+
+		/* Toggle the cycle bit after the last ring segment. */
+		if (cdnsp_link_trb_toggles_cycle(next))
+			ring->cycle_state ^= 1;
+
+		ring->enq_seg = ring->enq_seg->next;
+		ring->enqueue = ring->enq_seg->trbs;
+		next = ring->enqueue;
+	}
+
+	trace_cdnsp_inc_enq(ring);
+}
+
+/*
+ * Check to see if there's room to enqueue num_trbs on the ring and make sure
+ * enqueue pointer will not advance into dequeue segment.
+ */
+static bool cdnsp_room_on_ring(struct cdnsp_device *pdev,
+			       struct cdnsp_ring *ring,
+			       unsigned int num_trbs)
+{
+	int num_trbs_in_deq_seg;
+
+	if (ring->num_trbs_free < num_trbs)
+		return false;
+
+	if (ring->type != TYPE_COMMAND && ring->type != TYPE_EVENT) {
+		num_trbs_in_deq_seg = ring->dequeue - ring->deq_seg->trbs;
+
+		if (ring->num_trbs_free < num_trbs + num_trbs_in_deq_seg)
+			return false;
+	}
+
+	return true;
+}
+
+/*
+ * Workaround for L1: controller has issue with resuming from L1 after
+ * setting doorbell for endpoint during L1 state. This function forces
+ * resume signal in such case.
+ */
+static void cdnsp_force_l0_go(struct cdnsp_device *pdev)
+{
+	if (pdev->active_port != &pdev->usb3_port && pdev->gadget.lpm_capable)
+		cdnsp_set_link_state(pdev, &pdev->active_port->regs->portsc, XDEV_U0);
+}
+
+/* Ring the doorbell after placing a command on the ring. */
+void cdnsp_ring_cmd_db(struct cdnsp_device *pdev)
+{
+	writel(DB_VALUE_CMD, &pdev->dba->cmd_db);
+}
+
+/*
+ * Ring the doorbell after placing a transfer on the ring.
+ * Returns true if doorbell was set, otherwise false.
+ */
+static bool cdnsp_ring_ep_doorbell(struct cdnsp_device *pdev,
+				   struct cdnsp_ep *pep,
+				   unsigned int stream_id)
+{
+	__le32 __iomem *reg_addr = &pdev->dba->ep_db;
+	unsigned int ep_state = pep->ep_state;
+	unsigned int db_value;
+
+	/*
+	 * Don't ring the doorbell for this endpoint if endpoint is halted or
+	 * disabled.
+	 */
+	if (ep_state & EP_HALTED || !(ep_state & EP_ENABLED))
+		return false;
+
+	/* For stream capable endpoints driver can ring doorbell only twice. */
+	if (pep->ep_state & EP_HAS_STREAMS) {
+		if (pep->stream_info.drbls_count >= 2)
+			return false;
+
+		pep->stream_info.drbls_count++;
+	}
+
+	pep->ep_state &= ~EP_STOPPED;
+
+	if (pep->idx == 0 && pdev->ep0_stage == CDNSP_DATA_STAGE &&
+	    !pdev->ep0_expect_in)
+		db_value = DB_VALUE_EP0_OUT(pep->idx, stream_id);
+	else
+		db_value = DB_VALUE(pep->idx, stream_id);
+
+	trace_cdnsp_tr_drbl(pep, stream_id);
+
+	writel(db_value, reg_addr);
+
+	if (pdev->rtl_revision < RTL_REVISION_NEW_LPM)
+		cdnsp_force_l0_go(pdev);
+
+	/* Doorbell was set. */
+	return true;
+}
+
+/*
+ * Get the right ring for the given pep and stream_id.
+ * If the endpoint supports streams, boundary check the USB request's stream ID.
+ * If the endpoint doesn't support streams, return the singular endpoint ring.
+ */
+static struct cdnsp_ring *cdnsp_get_transfer_ring(struct cdnsp_device *pdev,
+						  struct cdnsp_ep *pep,
+						  unsigned int stream_id)
+{
+	if (!(pep->ep_state & EP_HAS_STREAMS))
+		return pep->ring;
+
+	if (stream_id == 0 || stream_id >= pep->stream_info.num_streams) {
+		dev_err(pdev->dev, "ERR: %s ring doesn't exist for SID: %d.\n",
+			pep->name, stream_id);
+		return NULL;
+	}
+
+	return pep->stream_info.stream_rings[stream_id];
+}
+
+static struct cdnsp_ring *
+	cdnsp_request_to_transfer_ring(struct cdnsp_device *pdev,
+				       struct cdnsp_request *preq)
+{
+	return cdnsp_get_transfer_ring(pdev, preq->pep,
+				       preq->request.stream_id);
+}
+
+/* Ring the doorbell for any rings with pending requests. */
+void cdnsp_ring_doorbell_for_active_rings(struct cdnsp_device *pdev,
+					  struct cdnsp_ep *pep)
+{
+	struct cdnsp_stream_info *stream_info;
+	unsigned int stream_id;
+	int ret;
+
+	if (pep->ep_state & EP_DIS_IN_RROGRESS)
+		return;
+
+	/* A ring has pending Request if its TD list is not empty. */
+	if (!(pep->ep_state & EP_HAS_STREAMS) && pep->number) {
+		if (pep->ring && !list_empty(&pep->ring->td_list))
+			cdnsp_ring_ep_doorbell(pdev, pep, 0);
+		return;
+	}
+
+	stream_info = &pep->stream_info;
+
+	for (stream_id = 1; stream_id < stream_info->num_streams; stream_id++) {
+		struct cdnsp_td *td, *td_temp;
+		struct cdnsp_ring *ep_ring;
+
+		if (stream_info->drbls_count >= 2)
+			return;
+
+		ep_ring = cdnsp_get_transfer_ring(pdev, pep, stream_id);
+		if (!ep_ring)
+			continue;
+
+		if (!ep_ring->stream_active || ep_ring->stream_rejected)
+			continue;
+
+		list_for_each_entry_safe(td, td_temp, &ep_ring->td_list,
+					 td_list) {
+			if (td->drbl)
+				continue;
+
+			ret = cdnsp_ring_ep_doorbell(pdev, pep, stream_id);
+			if (ret)
+				td->drbl = 1;
+		}
+	}
+}
+
+/*
+ * Get the hw dequeue pointer controller stopped on, either directly from the
+ * endpoint context, or if streams are in use from the stream context.
+ * The returned hw_dequeue contains the lowest four bits with cycle state
+ * and possible stream context type.
+ */
+static u64 cdnsp_get_hw_deq(struct cdnsp_device *pdev,
+			    unsigned int ep_index,
+			    unsigned int stream_id)
+{
+	struct cdnsp_stream_ctx *st_ctx;
+	struct cdnsp_ep *pep;
+
+	pep = &pdev->eps[ep_index];
+
+	if (pep->ep_state & EP_HAS_STREAMS) {
+		st_ctx = &pep->stream_info.stream_ctx_array[stream_id];
+		return le64_to_cpu(st_ctx->stream_ring);
+	}
+
+	return le64_to_cpu(pep->out_ctx->deq);
+}
+
+/*
+ * Move the controller endpoint ring dequeue pointer past cur_td.
+ * Record the new state of the controller endpoint ring dequeue segment,
+ * dequeue pointer, and new consumer cycle state in state.
+ * Update internal representation of the ring's dequeue pointer.
+ *
+ * We do this in three jumps:
+ *  - First we update our new ring state to be the same as when the
+ *    controller stopped.
+ *  - Then we traverse the ring to find the segment that contains
+ *    the last TRB in the TD. We toggle the controller new cycle state
+ *    when we pass any link TRBs with the toggle cycle bit set.
+ *  - Finally we move the dequeue state one TRB further, toggling the cycle bit
+ *    if we've moved it past a link TRB with the toggle cycle bit set.
+ */
+static void cdnsp_find_new_dequeue_state(struct cdnsp_device *pdev,
+					 struct cdnsp_ep *pep,
+					 unsigned int stream_id,
+					 struct cdnsp_td *cur_td,
+					 struct cdnsp_dequeue_state *state)
+{
+	bool td_last_trb_found = false;
+	struct cdnsp_segment *new_seg;
+	struct cdnsp_ring *ep_ring;
+	union cdnsp_trb *new_deq;
+	bool cycle_found = false;
+	u64 hw_dequeue;
+
+	ep_ring = cdnsp_get_transfer_ring(pdev, pep, stream_id);
+	if (!ep_ring)
+		return;
+
+	/*
+	 * Dig out the cycle state saved by the controller during the
+	 * stop endpoint command.
+	 */
+	hw_dequeue = cdnsp_get_hw_deq(pdev, pep->idx, stream_id);
+	new_seg = ep_ring->deq_seg;
+	new_deq = ep_ring->dequeue;
+	state->new_cycle_state = hw_dequeue & 0x1;
+	state->stream_id = stream_id;
+
+	/*
+	 * We want to find the pointer, segment and cycle state of the new trb
+	 * (the one after current TD's last_trb). We know the cycle state at
+	 * hw_dequeue, so walk the ring until both hw_dequeue and last_trb are
+	 * found.
+	 */
+	do {
+		if (!cycle_found && cdnsp_trb_virt_to_dma(new_seg, new_deq)
+		    == (dma_addr_t)(hw_dequeue & ~0xf)) {
+			cycle_found = true;
+
+			if (td_last_trb_found)
+				break;
+		}
+
+		if (new_deq == cur_td->last_trb)
+			td_last_trb_found = true;
+
+		if (cycle_found && cdnsp_trb_is_link(new_deq) &&
+		    cdnsp_link_trb_toggles_cycle(new_deq))
+			state->new_cycle_state ^= 0x1;
+
+		cdnsp_next_trb(pdev, ep_ring, &new_seg, &new_deq);
+
+		/* Search wrapped around, bail out. */
+		if (new_deq == pep->ring->dequeue) {
+			dev_err(pdev->dev,
+				"Error: Failed finding new dequeue state\n");
+			state->new_deq_seg = NULL;
+			state->new_deq_ptr = NULL;
+			return;
+		}
+
+	} while (!cycle_found || !td_last_trb_found);
+
+	state->new_deq_seg = new_seg;
+	state->new_deq_ptr = new_deq;
+
+	trace_cdnsp_new_deq_state(state);
+}
+
+/*
+ * flip_cycle means flip the cycle bit of all but the first and last TRB.
+ * (The last TRB actually points to the ring enqueue pointer, which is not part
+ * of this TD.) This is used to remove partially enqueued isoc TDs from a ring.
+ */
+static void cdnsp_td_to_noop(struct cdnsp_device *pdev,
+			     struct cdnsp_ring *ep_ring,
+			     struct cdnsp_td *td,
+			     bool flip_cycle)
+{
+	struct cdnsp_segment *seg = td->start_seg;
+	union cdnsp_trb *trb = td->first_trb;
+
+	while (1) {
+		cdnsp_trb_to_noop(trb, TRB_TR_NOOP);
+
+		/* flip cycle if asked to */
+		if (flip_cycle && trb != td->first_trb && trb != td->last_trb)
+			trb->generic.field[3] ^= cpu_to_le32(TRB_CYCLE);
+
+		if (trb == td->last_trb)
+			break;
+
+		cdnsp_next_trb(pdev, ep_ring, &seg, &trb);
+	}
+}
+
+/*
+ * This TD is defined by the TRBs starting at start_trb in start_seg and ending
+ * at end_trb, which may be in another segment. If the suspect DMA address is a
+ * TRB in this TD, this function returns that TRB's segment. Otherwise it
+ * returns 0.
+ */
+static struct cdnsp_segment *cdnsp_trb_in_td(struct cdnsp_device *pdev,
+					     struct cdnsp_segment *start_seg,
+					     union cdnsp_trb *start_trb,
+					     union cdnsp_trb *end_trb,
+					     dma_addr_t suspect_dma)
+{
+	struct cdnsp_segment *cur_seg;
+	union cdnsp_trb *temp_trb;
+	dma_addr_t end_seg_dma;
+	dma_addr_t end_trb_dma;
+	dma_addr_t start_dma;
+
+	start_dma = cdnsp_trb_virt_to_dma(start_seg, start_trb);
+	cur_seg = start_seg;
+
+	do {
+		if (start_dma == 0)
+			return NULL;
+
+		temp_trb = &cur_seg->trbs[TRBS_PER_SEGMENT - 1];
+		/* We may get an event for a Link TRB in the middle of a TD */
+		end_seg_dma = cdnsp_trb_virt_to_dma(cur_seg, temp_trb);
+		/* If the end TRB isn't in this segment, this is set to 0 */
+		end_trb_dma = cdnsp_trb_virt_to_dma(cur_seg, end_trb);
+
+		trace_cdnsp_looking_trb_in_td(suspect_dma, start_dma,
+					      end_trb_dma, cur_seg->dma,
+					      end_seg_dma);
+
+		if (end_trb_dma > 0) {
+			/*
+			 * The end TRB is in this segment, so suspect should
+			 * be here
+			 */
+			if (start_dma <= end_trb_dma) {
+				if (suspect_dma >= start_dma &&
+				    suspect_dma <= end_trb_dma) {
+					return cur_seg;
+				}
+			} else {
+				/*
+				 * Case for one segment with a
+				 * TD wrapped around to the top
+				 */
+				if ((suspect_dma >= start_dma &&
+				     suspect_dma <= end_seg_dma) ||
+				    (suspect_dma >= cur_seg->dma &&
+				     suspect_dma <= end_trb_dma)) {
+					return cur_seg;
+				}
+			}
+
+			return NULL;
+		}
+
+		/* Might still be somewhere in this segment */
+		if (suspect_dma >= start_dma && suspect_dma <= end_seg_dma)
+			return cur_seg;
+
+		cur_seg = cur_seg->next;
+		start_dma = cdnsp_trb_virt_to_dma(cur_seg, &cur_seg->trbs[0]);
+	} while (cur_seg != start_seg);
+
+	return NULL;
+}
+
+static void cdnsp_unmap_td_bounce_buffer(struct cdnsp_device *pdev,
+					 struct cdnsp_ring *ring,
+					 struct cdnsp_td *td)
+{
+	struct cdnsp_segment *seg = td->bounce_seg;
+	struct cdnsp_request *preq;
+	size_t len;
+
+	if (!seg)
+		return;
+
+	preq = td->preq;
+
+	trace_cdnsp_bounce_unmap(td->preq, seg->bounce_len, seg->bounce_offs,
+				 seg->bounce_dma, 0);
+
+	if (!preq->direction) {
+		dma_unmap_single(pdev->dev, seg->bounce_dma,
+				 ring->bounce_buf_len,  DMA_TO_DEVICE);
+		return;
+	}
+
+	dma_unmap_single(pdev->dev, seg->bounce_dma, ring->bounce_buf_len,
+			 DMA_FROM_DEVICE);
+
+	/* For in transfers we need to copy the data from bounce to sg */
+	len = sg_pcopy_from_buffer(preq->request.sg, preq->request.num_sgs,
+				   seg->bounce_buf, seg->bounce_len,
+				   seg->bounce_offs);
+	if (len != seg->bounce_len)
+		dev_warn(pdev->dev, "WARN Wrong bounce buffer read length: %zu != %d\n",
+			 len, seg->bounce_len);
+
+	seg->bounce_len = 0;
+	seg->bounce_offs = 0;
+}
+
+static int cdnsp_cmd_set_deq(struct cdnsp_device *pdev,
+			     struct cdnsp_ep *pep,
+			     struct cdnsp_dequeue_state *deq_state)
+{
+	struct cdnsp_ring *ep_ring;
+	int ret;
+
+	if (!deq_state->new_deq_ptr || !deq_state->new_deq_seg) {
+		cdnsp_ring_doorbell_for_active_rings(pdev, pep);
+		return 0;
+	}
+
+	cdnsp_queue_new_dequeue_state(pdev, pep, deq_state);
+	cdnsp_ring_cmd_db(pdev);
+	ret = cdnsp_wait_for_cmd_compl(pdev);
+
+	trace_cdnsp_handle_cmd_set_deq(cdnsp_get_slot_ctx(&pdev->out_ctx));
+	trace_cdnsp_handle_cmd_set_deq_ep(pep->out_ctx);
+
+	/*
+	 * Update the ring's dequeue segment and dequeue pointer
+	 * to reflect the new position.
+	 */
+	ep_ring = cdnsp_get_transfer_ring(pdev, pep, deq_state->stream_id);
+
+	if (cdnsp_trb_is_link(ep_ring->dequeue)) {
+		ep_ring->deq_seg = ep_ring->deq_seg->next;
+		ep_ring->dequeue = ep_ring->deq_seg->trbs;
+	}
+
+	while (ep_ring->dequeue != deq_state->new_deq_ptr) {
+		ep_ring->num_trbs_free++;
+		ep_ring->dequeue++;
+
+		if (cdnsp_trb_is_link(ep_ring->dequeue)) {
+			if (ep_ring->dequeue == deq_state->new_deq_ptr)
+				break;
+
+			ep_ring->deq_seg = ep_ring->deq_seg->next;
+			ep_ring->dequeue = ep_ring->deq_seg->trbs;
+		}
+	}
+
+	/*
+	 * Probably there was TIMEOUT during handling Set Dequeue Pointer
+	 * command. It's critical error and controller will be stopped.
+	 */
+	if (ret)
+		return -ESHUTDOWN;
+
+	/* Restart any rings with pending requests */
+	cdnsp_ring_doorbell_for_active_rings(pdev, pep);
+
+	return 0;
+}
+
+int cdnsp_remove_request(struct cdnsp_device *pdev,
+			 struct cdnsp_request *preq,
+			 struct cdnsp_ep *pep)
+{
+	struct cdnsp_dequeue_state deq_state;
+	struct cdnsp_td *cur_td = NULL;
+	struct cdnsp_ring *ep_ring;
+	struct cdnsp_segment *seg;
+	int status = -ECONNRESET;
+	int ret = 0;
+	u64 hw_deq;
+
+	memset(&deq_state, 0, sizeof(deq_state));
+
+	trace_cdnsp_remove_request(pep->out_ctx);
+	trace_cdnsp_remove_request_td(preq);
+
+	cur_td = &preq->td;
+	ep_ring = cdnsp_request_to_transfer_ring(pdev, preq);
+
+	/*
+	 * If we stopped on the TD we need to cancel, then we have to
+	 * move the controller endpoint ring dequeue pointer past
+	 * this TD.
+	 */
+	hw_deq = cdnsp_get_hw_deq(pdev, pep->idx, preq->request.stream_id);
+	hw_deq &= ~0xf;
+
+	seg = cdnsp_trb_in_td(pdev, cur_td->start_seg, cur_td->first_trb,
+			      cur_td->last_trb, hw_deq);
+
+	if (seg && (pep->ep_state & EP_ENABLED) &&
+	    !(pep->ep_state & EP_DIS_IN_RROGRESS))
+		cdnsp_find_new_dequeue_state(pdev, pep, preq->request.stream_id,
+					     cur_td, &deq_state);
+	else
+		cdnsp_td_to_noop(pdev, ep_ring, cur_td, false);
+
+	/*
+	 * The event handler won't see a completion for this TD anymore,
+	 * so remove it from the endpoint ring's TD list.
+	 */
+	list_del_init(&cur_td->td_list);
+	ep_ring->num_tds--;
+	pep->stream_info.td_count--;
+
+	/*
+	 * During disconnecting all endpoint will be disabled so we don't
+	 * have to worry about updating dequeue pointer.
+	 */
+	if (pdev->cdnsp_state & CDNSP_STATE_DISCONNECT_PENDING ||
+	    pep->ep_state & EP_DIS_IN_RROGRESS) {
+		status = -ESHUTDOWN;
+		ret = cdnsp_cmd_set_deq(pdev, pep, &deq_state);
+	}
+
+	cdnsp_unmap_td_bounce_buffer(pdev, ep_ring, cur_td);
+	cdnsp_gadget_giveback(pep, cur_td->preq, status);
+
+	return ret;
+}
+
+static int cdnsp_update_port_id(struct cdnsp_device *pdev, u32 port_id)
+{
+	struct cdnsp_port *port = pdev->active_port;
+	u8 old_port = 0;
+
+	if (port && port->port_num == port_id)
+		return 0;
+
+	if (port)
+		old_port = port->port_num;
+
+	if (port_id == pdev->usb2_port.port_num) {
+		port = &pdev->usb2_port;
+	} else if (port_id == pdev->eusb_port.port_num) {
+		port = &pdev->eusb_port;
+	} else if (port_id == pdev->usb3_port.port_num) {
+		port  = &pdev->usb3_port;
+	} else {
+		dev_err(pdev->dev, "Port event with invalid port ID %d\n",
+			port_id);
+		return -EINVAL;
+	}
+
+	if (port_id != old_port) {
+		if (pdev->slot_id)
+			cdnsp_disable_slot(pdev);
+
+		pdev->active_port = port;
+		cdnsp_enable_slot(pdev);
+	}
+
+	if ((pdev->usb2_port.exist && port_id == pdev->usb2_port.port_num) ||
+	    (pdev->eusb_port.exist && port_id == pdev->eusb_port.port_num))
+		cdnsp_set_usb2_hardware_lpm(pdev, NULL, 1);
+	else
+		writel(PORT_U1_TIMEOUT(1) | PORT_U2_TIMEOUT(1),
+		       &pdev->usb3_port.regs->portpmsc);
+
+	return 0;
+}
+
+static void cdnsp_handle_port_status(struct cdnsp_device *pdev,
+				     union cdnsp_trb *event)
+{
+	struct cdnsp_port_regs __iomem *port_regs;
+	u32 portsc, cmd_regs;
+	bool port2 = false;
+	u32 link_state;
+	u32 port_id;
+
+	/* Port status change events always have a successful completion code */
+	if (GET_COMP_CODE(le32_to_cpu(event->generic.field[2])) != COMP_SUCCESS)
+		dev_err(pdev->dev, "ERR: incorrect PSC event\n");
+
+	port_id = GET_PORT_ID(le32_to_cpu(event->generic.field[0]));
+
+	if (cdnsp_update_port_id(pdev, port_id))
+		goto cleanup;
+
+	port_regs = pdev->active_port->regs;
+
+	if (port_id == pdev->usb2_port.port_num || port_id == pdev->eusb_port.port_num)
+		port2 = true;
+
+new_event:
+	portsc = readl(&port_regs->portsc);
+	writel(cdnsp_port_state_to_neutral(portsc) |
+	       (portsc & PORT_CHANGE_BITS), &port_regs->portsc);
+
+	trace_cdnsp_handle_port_status(pdev->active_port->port_num, portsc);
+
+	pdev->gadget.speed = cdnsp_port_speed(portsc);
+	link_state = portsc & PORT_PLS_MASK;
+
+	/* Port Link State change detected. */
+	if ((portsc & PORT_PLC)) {
+		if (!(pdev->cdnsp_state & CDNSP_WAKEUP_PENDING)  &&
+		    link_state == XDEV_RESUME) {
+			cmd_regs = readl(&pdev->op_regs->command);
+			if (!(cmd_regs & CMD_R_S))
+				goto cleanup;
+
+			if (DEV_SUPERSPEED_ANY(portsc)) {
+				cdnsp_set_link_state(pdev, &port_regs->portsc,
+						     XDEV_U0);
+
+				cdnsp_resume_gadget(pdev);
+			}
+		}
+
+		if ((pdev->cdnsp_state & CDNSP_WAKEUP_PENDING) &&
+		    link_state == XDEV_U0) {
+			pdev->cdnsp_state &= ~CDNSP_WAKEUP_PENDING;
+
+			cdnsp_force_header_wakeup(pdev, 1);
+			cdnsp_ring_cmd_db(pdev);
+			cdnsp_wait_for_cmd_compl(pdev);
+		}
+
+		if (link_state == XDEV_U0 && pdev->link_state == XDEV_U3 &&
+		    !DEV_SUPERSPEED_ANY(portsc))
+			cdnsp_resume_gadget(pdev);
+
+		if (link_state == XDEV_U3 &&  pdev->link_state != XDEV_U3)
+			cdnsp_suspend_gadget(pdev);
+
+		pdev->link_state = link_state;
+	}
+
+	if (portsc & PORT_CSC) {
+		/* Detach device. */
+		if (pdev->gadget.connected && !(portsc & PORT_CONNECT))
+			cdnsp_disconnect_gadget(pdev);
+
+		/* Attach device. */
+		if (portsc & PORT_CONNECT) {
+			if (!port2)
+				cdnsp_irq_reset(pdev);
+
+			usb_gadget_set_state(&pdev->gadget, USB_STATE_ATTACHED);
+		}
+	}
+
+	/* Port reset. */
+	if ((portsc & (PORT_RC | PORT_WRC)) && (portsc & PORT_CONNECT)) {
+		cdnsp_irq_reset(pdev);
+		pdev->u1_allowed = 0;
+		pdev->u2_allowed = 0;
+		pdev->may_wakeup = 0;
+	}
+
+	if (portsc & PORT_CEC)
+		dev_err(pdev->dev, "Port Over Current detected\n");
+
+	if (portsc & PORT_CEC)
+		dev_err(pdev->dev, "Port Configure Error detected\n");
+
+	if (readl(&port_regs->portsc) & PORT_CHANGE_BITS)
+		goto new_event;
+
+cleanup:
+	cdnsp_inc_deq(pdev, pdev->event_ring);
+}
+
+static void cdnsp_td_cleanup(struct cdnsp_device *pdev,
+			     struct cdnsp_td *td,
+			     struct cdnsp_ring *ep_ring,
+			     int *status)
+{
+	struct cdnsp_request *preq = td->preq;
+
+	/* if a bounce buffer was used to align this td then unmap it */
+	cdnsp_unmap_td_bounce_buffer(pdev, ep_ring, td);
+
+	/*
+	 * If the controller said we transferred more data than the buffer
+	 * length, Play it safe and say we didn't transfer anything.
+	 */
+	if (preq->request.actual > preq->request.length) {
+		preq->request.actual = 0;
+		*status = 0;
+	}
+
+	list_del_init(&td->td_list);
+	ep_ring->num_tds--;
+	preq->pep->stream_info.td_count--;
+
+	cdnsp_gadget_giveback(preq->pep, preq, *status);
+}
+
+static void cdnsp_finish_td(struct cdnsp_device *pdev,
+			    struct cdnsp_td *td,
+			    struct cdnsp_transfer_event *event,
+			    struct cdnsp_ep *ep,
+			    int *status)
+{
+	struct cdnsp_ring *ep_ring;
+	u32 trb_comp_code;
+
+	ep_ring = cdnsp_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
+	trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
+
+	if (trb_comp_code == COMP_STOPPED_LENGTH_INVALID ||
+	    trb_comp_code == COMP_STOPPED ||
+	    trb_comp_code == COMP_STOPPED_SHORT_PACKET) {
+		/*
+		 * The Endpoint Stop Command completion will take care of any
+		 * stopped TDs. A stopped TD may be restarted, so don't update
+		 * the ring dequeue pointer or take this TD off any lists yet.
+		 */
+		return;
+	}
+
+	/* Update ring dequeue pointer */
+	while (ep_ring->dequeue != td->last_trb)
+		cdnsp_inc_deq(pdev, ep_ring);
+
+	cdnsp_inc_deq(pdev, ep_ring);
+
+	cdnsp_td_cleanup(pdev, td, ep_ring, status);
+}
+
+/* sum trb lengths from ring dequeue up to stop_trb, _excluding_ stop_trb */
+static int cdnsp_sum_trb_lengths(struct cdnsp_device *pdev,
+				 struct cdnsp_ring *ring,
+				 union cdnsp_trb *stop_trb)
+{
+	struct cdnsp_segment *seg = ring->deq_seg;
+	union cdnsp_trb *trb = ring->dequeue;
+	u32 sum;
+
+	for (sum = 0; trb != stop_trb; cdnsp_next_trb(pdev, ring, &seg, &trb)) {
+		if (!cdnsp_trb_is_noop(trb) && !cdnsp_trb_is_link(trb))
+			sum += TRB_LEN(le32_to_cpu(trb->generic.field[2]));
+	}
+	return sum;
+}
+
+static int cdnsp_giveback_first_trb(struct cdnsp_device *pdev,
+				    struct cdnsp_ep *pep,
+				    unsigned int stream_id,
+				    int start_cycle,
+				    struct cdnsp_generic_trb *start_trb)
+{
+	/*
+	 * Pass all the TRBs to the hardware at once and make sure this write
+	 * isn't reordered.
+	 */
+	wmb();
+
+	if (start_cycle)
+		start_trb->field[3] |= cpu_to_le32(start_cycle);
+	else
+		start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
+
+	if ((pep->ep_state & EP_HAS_STREAMS) &&
+	    !pep->stream_info.first_prime_det) {
+		trace_cdnsp_wait_for_prime(pep, stream_id);
+		return 0;
+	}
+
+	return cdnsp_ring_ep_doorbell(pdev, pep, stream_id);
+}
+
+/*
+ * Process control tds, update USB request status and actual_length.
+ */
+static void cdnsp_process_ctrl_td(struct cdnsp_device *pdev,
+				  struct cdnsp_td *td,
+				  union cdnsp_trb *event_trb,
+				  struct cdnsp_transfer_event *event,
+				  struct cdnsp_ep *pep,
+				  int *status)
+{
+	struct cdnsp_ring *ep_ring;
+	u32 remaining;
+	u32 trb_type;
+
+	trb_type = TRB_FIELD_TO_TYPE(le32_to_cpu(event_trb->generic.field[3]));
+	ep_ring = cdnsp_dma_to_transfer_ring(pep, le64_to_cpu(event->buffer));
+	remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
+
+	/*
+	 * if on data stage then update the actual_length of the USB
+	 * request and flag it as set, so it won't be overwritten in the event
+	 * for the last TRB.
+	 */
+	if (trb_type == TRB_DATA) {
+		td->request_length_set = true;
+		td->preq->request.actual = td->preq->request.length - remaining;
+	}
+
+	/* at status stage */
+	if (!td->request_length_set)
+		td->preq->request.actual = td->preq->request.length;
+
+	if (pdev->ep0_stage == CDNSP_DATA_STAGE && pep->number == 0 &&
+	    pdev->three_stage_setup) {
+		td = list_entry(ep_ring->td_list.next, struct cdnsp_td,
+				td_list);
+		pdev->ep0_stage = CDNSP_STATUS_STAGE;
+
+		cdnsp_giveback_first_trb(pdev, pep, 0, ep_ring->cycle_state,
+					 &td->last_trb->generic);
+		return;
+	}
+
+	*status = 0;
+
+	cdnsp_finish_td(pdev, td, event, pep, status);
+}
+
+/*
+ * Process isochronous tds, update usb request status and actual_length.
+ */
+static void cdnsp_process_isoc_td(struct cdnsp_device *pdev,
+				  struct cdnsp_td *td,
+				  union cdnsp_trb *ep_trb,
+				  struct cdnsp_transfer_event *event,
+				  struct cdnsp_ep *pep,
+				  int status)
+{
+	struct cdnsp_request *preq = td->preq;
+	u32 remaining, requested, ep_trb_len;
+	bool sum_trbs_for_length = false;
+	struct cdnsp_ring *ep_ring;
+	u32 trb_comp_code;
+	u32 td_length;
+
+	ep_ring = cdnsp_dma_to_transfer_ring(pep, le64_to_cpu(event->buffer));
+	trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
+	remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
+	ep_trb_len = TRB_LEN(le32_to_cpu(ep_trb->generic.field[2]));
+
+	requested = preq->request.length;
+
+	/* handle completion code */
+	switch (trb_comp_code) {
+	case COMP_SUCCESS:
+		preq->request.status = 0;
+		break;
+	case COMP_SHORT_PACKET:
+		preq->request.status = 0;
+		sum_trbs_for_length = true;
+		break;
+	case COMP_ISOCH_BUFFER_OVERRUN:
+	case COMP_BABBLE_DETECTED_ERROR:
+		preq->request.status = -EOVERFLOW;
+		break;
+	case COMP_STOPPED:
+		sum_trbs_for_length = true;
+		break;
+	case COMP_STOPPED_SHORT_PACKET:
+		/* field normally containing residue now contains transferred */
+		preq->request.status  = 0;
+		requested = remaining;
+		break;
+	case COMP_STOPPED_LENGTH_INVALID:
+		requested = 0;
+		remaining = 0;
+		break;
+	default:
+		sum_trbs_for_length = true;
+		preq->request.status = -1;
+		break;
+	}
+
+	if (sum_trbs_for_length) {
+		td_length = cdnsp_sum_trb_lengths(pdev, ep_ring, ep_trb);
+		td_length += ep_trb_len - remaining;
+	} else {
+		td_length = requested;
+	}
+
+	td->preq->request.actual += td_length;
+
+	cdnsp_finish_td(pdev, td, event, pep, &status);
+}
+
+static void cdnsp_skip_isoc_td(struct cdnsp_device *pdev,
+			       struct cdnsp_td *td,
+			       struct cdnsp_transfer_event *event,
+			       struct cdnsp_ep *pep,
+			       int status)
+{
+	struct cdnsp_ring *ep_ring;
+
+	ep_ring = cdnsp_dma_to_transfer_ring(pep, le64_to_cpu(event->buffer));
+	td->preq->request.status = -EXDEV;
+	td->preq->request.actual = 0;
+
+	/* Update ring dequeue pointer */
+	while (ep_ring->dequeue != td->last_trb)
+		cdnsp_inc_deq(pdev, ep_ring);
+
+	cdnsp_inc_deq(pdev, ep_ring);
+
+	cdnsp_td_cleanup(pdev, td, ep_ring, &status);
+}
+
+/*
+ * Process bulk and interrupt tds, update usb request status and actual_length.
+ */
+static void cdnsp_process_bulk_intr_td(struct cdnsp_device *pdev,
+				       struct cdnsp_td *td,
+				       union cdnsp_trb *ep_trb,
+				       struct cdnsp_transfer_event *event,
+				       struct cdnsp_ep *ep,
+				       int *status)
+{
+	u32 remaining, requested, ep_trb_len;
+	struct cdnsp_ring *ep_ring;
+	u32 trb_comp_code;
+
+	ep_ring = cdnsp_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
+	trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
+	remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
+	ep_trb_len = TRB_LEN(le32_to_cpu(ep_trb->generic.field[2]));
+	requested = td->preq->request.length;
+
+	switch (trb_comp_code) {
+	case COMP_SUCCESS:
+	case COMP_SHORT_PACKET:
+		*status = 0;
+		break;
+	case COMP_STOPPED_SHORT_PACKET:
+		td->preq->request.actual = remaining;
+		goto finish_td;
+	case COMP_STOPPED_LENGTH_INVALID:
+		/* Stopped on ep trb with invalid length, exclude it. */
+		ep_trb_len = 0;
+		remaining = 0;
+		break;
+	}
+
+	if (ep_trb == td->last_trb)
+		ep_trb_len = requested - remaining;
+	else
+		ep_trb_len = cdnsp_sum_trb_lengths(pdev, ep_ring, ep_trb) +
+						   ep_trb_len - remaining;
+	td->preq->request.actual = ep_trb_len;
+
+finish_td:
+	ep->stream_info.drbls_count--;
+
+	cdnsp_finish_td(pdev, td, event, ep, status);
+}
+
+static void cdnsp_handle_tx_nrdy(struct cdnsp_device *pdev,
+				 struct cdnsp_transfer_event *event)
+{
+	struct cdnsp_generic_trb *generic;
+	struct cdnsp_ring *ep_ring;
+	struct cdnsp_ep *pep;
+	int cur_stream;
+	int ep_index;
+	int host_sid;
+	int dev_sid;
+
+	generic = (struct cdnsp_generic_trb *)event;
+	ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
+	dev_sid = TRB_TO_DEV_STREAM(le32_to_cpu(generic->field[0]));
+	host_sid = TRB_TO_HOST_STREAM(le32_to_cpu(generic->field[2]));
+
+	pep = &pdev->eps[ep_index];
+
+	if (!(pep->ep_state & EP_HAS_STREAMS))
+		return;
+
+	if (host_sid == STREAM_PRIME_ACK) {
+		pep->stream_info.first_prime_det = 1;
+		for (cur_stream = 1; cur_stream < pep->stream_info.num_streams;
+		    cur_stream++) {
+			ep_ring = pep->stream_info.stream_rings[cur_stream];
+			ep_ring->stream_active = 1;
+			ep_ring->stream_rejected = 0;
+		}
+	}
+
+	if (host_sid == STREAM_REJECTED) {
+		struct cdnsp_td *td, *td_temp;
+
+		pep->stream_info.drbls_count--;
+		ep_ring = pep->stream_info.stream_rings[dev_sid];
+		ep_ring->stream_active = 0;
+		ep_ring->stream_rejected = 1;
+
+		list_for_each_entry_safe(td, td_temp, &ep_ring->td_list,
+					 td_list) {
+			td->drbl = 0;
+		}
+	}
+
+	cdnsp_ring_doorbell_for_active_rings(pdev, pep);
+}
+
+/*
+ * If this function returns an error condition, it means it got a Transfer
+ * event with a corrupted TRB DMA address or endpoint is disabled.
+ */
+static int cdnsp_handle_tx_event(struct cdnsp_device *pdev,
+				 struct cdnsp_transfer_event *event)
+{
+	const struct usb_endpoint_descriptor *desc;
+	bool handling_skipped_tds = false;
+	struct cdnsp_segment *ep_seg;
+	struct cdnsp_ring *ep_ring;
+	int status = -EINPROGRESS;
+	union cdnsp_trb *ep_trb;
+	dma_addr_t ep_trb_dma;
+	struct cdnsp_ep *pep;
+	struct cdnsp_td *td;
+	u32 trb_comp_code;
+	int invalidate;
+	int ep_index;
+
+	invalidate = le32_to_cpu(event->flags) & TRB_EVENT_INVALIDATE;
+	ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
+	trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
+	ep_trb_dma = le64_to_cpu(event->buffer);
+
+	pep = &pdev->eps[ep_index];
+	ep_ring = cdnsp_dma_to_transfer_ring(pep, le64_to_cpu(event->buffer));
+
+	/*
+	 * If device is disconnect then all requests will be dequeued
+	 * by upper layers as part of disconnect sequence.
+	 * We don't want handle such event to avoid racing.
+	 */
+	if (invalidate || !pdev->gadget.connected)
+		goto cleanup;
+
+	if (GET_EP_CTX_STATE(pep->out_ctx) == EP_STATE_DISABLED) {
+		trace_cdnsp_ep_disabled(pep->out_ctx);
+		goto err_out;
+	}
+
+	/* Some transfer events don't always point to a trb*/
+	if (!ep_ring) {
+		switch (trb_comp_code) {
+		case COMP_INVALID_STREAM_TYPE_ERROR:
+		case COMP_INVALID_STREAM_ID_ERROR:
+		case COMP_RING_UNDERRUN:
+		case COMP_RING_OVERRUN:
+			goto cleanup;
+		default:
+			dev_err(pdev->dev, "ERROR: %s event for unknown ring\n",
+				pep->name);
+			goto err_out;
+		}
+	}
+
+	/* Look for some error cases that need special treatment. */
+	switch (trb_comp_code) {
+	case COMP_BABBLE_DETECTED_ERROR:
+		status = -EOVERFLOW;
+		break;
+	case COMP_RING_UNDERRUN:
+	case COMP_RING_OVERRUN:
+		/*
+		 * When the Isoch ring is empty, the controller will generate
+		 * a Ring Overrun Event for IN Isoch endpoint or Ring
+		 * Underrun Event for OUT Isoch endpoint.
+		 */
+		goto cleanup;
+	case COMP_MISSED_SERVICE_ERROR:
+		/*
+		 * When encounter missed service error, one or more isoc tds
+		 * may be missed by controller.
+		 * Set skip flag of the ep_ring; Complete the missed tds as
+		 * short transfer when process the ep_ring next time.
+		 */
+		pep->skip = true;
+		break;
+	}
+
+	do {
+		/*
+		 * This TRB should be in the TD at the head of this ring's TD
+		 * list.
+		 */
+		if (list_empty(&ep_ring->td_list)) {
+			/*
+			 * Don't print warnings if it's due to a stopped
+			 * endpoint generating an extra completion event, or
+			 * a event for the last TRB of a short TD we already
+			 * got a short event for.
+			 * The short TD is already removed from the TD list.
+			 */
+			if (!(trb_comp_code == COMP_STOPPED ||
+			      trb_comp_code == COMP_STOPPED_LENGTH_INVALID ||
+			      ep_ring->last_td_was_short))
+				trace_cdnsp_trb_without_td(ep_ring,
+					(struct cdnsp_generic_trb *)event);
+
+			if (pep->skip) {
+				pep->skip = false;
+				trace_cdnsp_ep_list_empty_with_skip(pep, 0);
+			}
+
+			goto cleanup;
+		}
+
+		td = list_entry(ep_ring->td_list.next, struct cdnsp_td,
+				td_list);
+
+		/* Is this a TRB in the currently executing TD? */
+		ep_seg = cdnsp_trb_in_td(pdev, ep_ring->deq_seg,
+					 ep_ring->dequeue, td->last_trb,
+					 ep_trb_dma);
+
+		desc = td->preq->pep->endpoint.desc;
+
+		if (ep_seg) {
+			ep_trb = &ep_seg->trbs[(ep_trb_dma - ep_seg->dma)
+					       / sizeof(*ep_trb)];
+
+			trace_cdnsp_handle_transfer(ep_ring,
+					(struct cdnsp_generic_trb *)ep_trb);
+
+			if (pep->skip && usb_endpoint_xfer_isoc(desc) &&
+			    td->last_trb != ep_trb)
+				return -EAGAIN;
+		}
+
+		/*
+		 * Skip the Force Stopped Event. The event_trb(ep_trb_dma)
+		 * of FSE is not in the current TD pointed by ep_ring->dequeue
+		 * because that the hardware dequeue pointer still at the
+		 * previous TRB of the current TD. The previous TRB maybe a
+		 * Link TD or the last TRB of the previous TD. The command
+		 * completion handle will take care the rest.
+		 */
+		if (!ep_seg && (trb_comp_code == COMP_STOPPED ||
+				trb_comp_code == COMP_STOPPED_LENGTH_INVALID)) {
+			pep->skip = false;
+			goto cleanup;
+		}
+
+		if (!ep_seg) {
+			if (!pep->skip || !usb_endpoint_xfer_isoc(desc)) {
+				/* Something is busted, give up! */
+				dev_err(pdev->dev,
+					"ERROR Transfer event TRB DMA ptr not "
+					"part of current TD ep_index %d "
+					"comp_code %u\n", ep_index,
+					trb_comp_code);
+				return -EINVAL;
+			}
+
+			cdnsp_skip_isoc_td(pdev, td, event, pep, status);
+			goto cleanup;
+		}
+
+		if (trb_comp_code == COMP_SHORT_PACKET)
+			ep_ring->last_td_was_short = true;
+		else
+			ep_ring->last_td_was_short = false;
+
+		if (pep->skip) {
+			pep->skip = false;
+			cdnsp_skip_isoc_td(pdev, td, event, pep, status);
+			goto cleanup;
+		}
+
+		if (cdnsp_trb_is_noop(ep_trb))
+			goto cleanup;
+
+		if (usb_endpoint_xfer_control(desc))
+			cdnsp_process_ctrl_td(pdev, td, ep_trb, event, pep,
+					      &status);
+		else if (usb_endpoint_xfer_isoc(desc))
+			cdnsp_process_isoc_td(pdev, td, ep_trb, event, pep,
+					      status);
+		else
+			cdnsp_process_bulk_intr_td(pdev, td, ep_trb, event, pep,
+						   &status);
+cleanup:
+		handling_skipped_tds = pep->skip;
+
+		/*
+		 * Do not update event ring dequeue pointer if we're in a loop
+		 * processing missed tds.
+		 */
+		if (!handling_skipped_tds)
+			cdnsp_inc_deq(pdev, pdev->event_ring);
+
+	/*
+	 * If ep->skip is set, it means there are missed tds on the
+	 * endpoint ring need to take care of.
+	 * Process them as short transfer until reach the td pointed by
+	 * the event.
+	 */
+	} while (handling_skipped_tds);
+	return 0;
+
+err_out:
+	dev_err(pdev->dev, "@%016llx %08x %08x %08x %08x\n",
+		(unsigned long long)
+		cdnsp_trb_virt_to_dma(pdev->event_ring->deq_seg,
+				      pdev->event_ring->dequeue),
+		 lower_32_bits(le64_to_cpu(event->buffer)),
+		 upper_32_bits(le64_to_cpu(event->buffer)),
+		 le32_to_cpu(event->transfer_len),
+		 le32_to_cpu(event->flags));
+	return -EINVAL;
+}
+
+/*
+ * This function handles all events on the event ring.
+ * Returns true for "possibly more events to process" (caller should call
+ * again), otherwise false if done.
+ */
+static bool cdnsp_handle_event(struct cdnsp_device *pdev)
+{
+	unsigned int comp_code;
+	union cdnsp_trb *event;
+	bool update_ptrs = true;
+	u32 cycle_bit;
+	int ret = 0;
+	u32 flags;
+
+	event = pdev->event_ring->dequeue;
+	flags = le32_to_cpu(event->event_cmd.flags);
+	cycle_bit = (flags & TRB_CYCLE);
+
+	/* Does the controller or driver own the TRB? */
+	if (cycle_bit != pdev->event_ring->cycle_state)
+		return false;
+
+	trace_cdnsp_handle_event(pdev->event_ring, &event->generic);
+
+	/*
+	 * Barrier between reading the TRB_CYCLE (valid) flag above and any
+	 * reads of the event's flags/data below.
+	 */
+	rmb();
+
+	switch (flags & TRB_TYPE_BITMASK) {
+	case TRB_TYPE(TRB_COMPLETION):
+		/*
+		 * Command can't be handled in interrupt context so just
+		 * increment command ring dequeue pointer.
+		 */
+		cdnsp_inc_deq(pdev, pdev->cmd_ring);
+		break;
+	case TRB_TYPE(TRB_PORT_STATUS):
+		cdnsp_handle_port_status(pdev, event);
+		update_ptrs = false;
+		break;
+	case TRB_TYPE(TRB_TRANSFER):
+		ret = cdnsp_handle_tx_event(pdev, &event->trans_event);
+		if (ret >= 0)
+			update_ptrs = false;
+		break;
+	case TRB_TYPE(TRB_SETUP):
+		pdev->ep0_stage = CDNSP_SETUP_STAGE;
+		pdev->setup_id = TRB_SETUPID_TO_TYPE(flags);
+		pdev->setup_speed = TRB_SETUP_SPEEDID(flags);
+		pdev->setup = *((struct usb_ctrlrequest *)
+				&event->trans_event.buffer);
+
+		cdnsp_setup_analyze(pdev);
+		break;
+	case TRB_TYPE(TRB_ENDPOINT_NRDY):
+		cdnsp_handle_tx_nrdy(pdev, &event->trans_event);
+		break;
+	case TRB_TYPE(TRB_HC_EVENT): {
+		comp_code = GET_COMP_CODE(le32_to_cpu(event->generic.field[2]));
+
+		switch (comp_code) {
+		case COMP_EVENT_RING_FULL_ERROR:
+			dev_err(pdev->dev, "Event Ring Full\n");
+			break;
+		default:
+			dev_err(pdev->dev, "Controller error code 0x%02x\n",
+				comp_code);
+		}
+
+		break;
+	}
+	case TRB_TYPE(TRB_MFINDEX_WRAP):
+	case TRB_TYPE(TRB_DRB_OVERFLOW):
+		break;
+	default:
+		dev_warn(pdev->dev, "ERROR unknown event type %ld\n",
+			 TRB_FIELD_TO_TYPE(flags));
+	}
+
+	if (update_ptrs)
+		/* Update SW event ring dequeue pointer. */
+		cdnsp_inc_deq(pdev, pdev->event_ring);
+
+	/*
+	 * Caller will call us again to check if there are more items
+	 * on the event ring.
+	 */
+	return true;
+}
+
+irqreturn_t cdnsp_thread_irq_handler(int irq, void *data)
+{
+	struct cdnsp_device *pdev = (struct cdnsp_device *)data;
+	union cdnsp_trb *event_ring_deq;
+	unsigned long flags;
+	int counter = 0;
+
+	local_bh_disable();
+	spin_lock_irqsave(&pdev->lock, flags);
+
+	if (pdev->cdnsp_state & (CDNSP_STATE_HALTED | CDNSP_STATE_DYING)) {
+		/*
+		 * While removing or stopping driver there may still be deferred
+		 * not handled interrupt which should not be treated as error.
+		 * Driver should simply ignore it.
+		 */
+		if (pdev->gadget_driver)
+			cdnsp_died(pdev);
+
+		spin_unlock_irqrestore(&pdev->lock, flags);
+		local_bh_enable();
+		return IRQ_HANDLED;
+	}
+
+	event_ring_deq = pdev->event_ring->dequeue;
+
+	while (cdnsp_handle_event(pdev)) {
+		if (++counter >= TRBS_PER_EV_DEQ_UPDATE) {
+			cdnsp_update_erst_dequeue(pdev, event_ring_deq, 0);
+			event_ring_deq = pdev->event_ring->dequeue;
+			counter = 0;
+		}
+	}
+
+	cdnsp_update_erst_dequeue(pdev, event_ring_deq, 1);
+
+	spin_unlock_irqrestore(&pdev->lock, flags);
+	local_bh_enable();
+
+	return IRQ_HANDLED;
+}
+
+irqreturn_t cdnsp_irq_handler(int irq, void *priv)
+{
+	struct cdnsp_device *pdev = (struct cdnsp_device *)priv;
+	u32 irq_pending;
+	u32 status;
+
+	status = readl(&pdev->op_regs->status);
+
+	if (status == ~(u32)0) {
+		cdnsp_died(pdev);
+		return IRQ_HANDLED;
+	}
+
+	if (!(status & STS_EINT))
+		return IRQ_NONE;
+
+	writel(status | STS_EINT, &pdev->op_regs->status);
+	irq_pending = readl(&pdev->ir_set->irq_pending);
+	irq_pending |= IMAN_IP;
+	writel(irq_pending, &pdev->ir_set->irq_pending);
+
+	if (status & STS_FATAL) {
+		cdnsp_died(pdev);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_WAKE_THREAD;
+}
+
+/*
+ * Generic function for queuing a TRB on a ring.
+ * The caller must have checked to make sure there's room on the ring.
+ *
+ * @more_trbs_coming:	Will you enqueue more TRBs before setting doorbell?
+ */
+static void cdnsp_queue_trb(struct cdnsp_device *pdev, struct cdnsp_ring *ring,
+			    bool more_trbs_coming, u32 field1, u32 field2,
+			    u32 field3, u32 field4)
+{
+	struct cdnsp_generic_trb *trb;
+
+	trb = &ring->enqueue->generic;
+
+	trb->field[0] = cpu_to_le32(field1);
+	trb->field[1] = cpu_to_le32(field2);
+	trb->field[2] = cpu_to_le32(field3);
+	trb->field[3] = cpu_to_le32(field4);
+
+	trace_cdnsp_queue_trb(ring, trb);
+	cdnsp_inc_enq(pdev, ring, more_trbs_coming);
+}
+
+/*
+ * Does various checks on the endpoint ring, and makes it ready to
+ * queue num_trbs.
+ */
+static int cdnsp_prepare_ring(struct cdnsp_device *pdev,
+			      struct cdnsp_ring *ep_ring,
+			      u32 ep_state, unsigned
+			      int num_trbs,
+			      gfp_t mem_flags)
+{
+	unsigned int num_trbs_needed;
+
+	/* Make sure the endpoint has been added to controller schedule. */
+	switch (ep_state) {
+	case EP_STATE_STOPPED:
+	case EP_STATE_RUNNING:
+	case EP_STATE_HALTED:
+		break;
+	default:
+		dev_err(pdev->dev, "ERROR: incorrect endpoint state\n");
+		return -EINVAL;
+	}
+
+	while (1) {
+		if (cdnsp_room_on_ring(pdev, ep_ring, num_trbs))
+			break;
+
+		trace_cdnsp_no_room_on_ring("try ring expansion");
+
+		num_trbs_needed = num_trbs - ep_ring->num_trbs_free;
+		if (cdnsp_ring_expansion(pdev, ep_ring, num_trbs_needed,
+					 mem_flags)) {
+			dev_err(pdev->dev, "Ring expansion failed\n");
+			return -ENOMEM;
+		}
+	}
+
+	while (cdnsp_trb_is_link(ep_ring->enqueue)) {
+		ep_ring->enqueue->link.control |= cpu_to_le32(TRB_CHAIN);
+		/* The cycle bit must be set as the last operation. */
+		wmb();
+		ep_ring->enqueue->link.control ^= cpu_to_le32(TRB_CYCLE);
+
+		/* Toggle the cycle bit after the last ring segment. */
+		if (cdnsp_link_trb_toggles_cycle(ep_ring->enqueue))
+			ep_ring->cycle_state ^= 1;
+		ep_ring->enq_seg = ep_ring->enq_seg->next;
+		ep_ring->enqueue = ep_ring->enq_seg->trbs;
+	}
+	return 0;
+}
+
+static int cdnsp_prepare_transfer(struct cdnsp_device *pdev,
+				  struct cdnsp_request *preq,
+				  unsigned int num_trbs)
+{
+	struct cdnsp_ring *ep_ring;
+	int ret;
+
+	ep_ring = cdnsp_get_transfer_ring(pdev, preq->pep,
+					  preq->request.stream_id);
+	if (!ep_ring)
+		return -EINVAL;
+
+	ret = cdnsp_prepare_ring(pdev, ep_ring,
+				 GET_EP_CTX_STATE(preq->pep->out_ctx),
+				 num_trbs, GFP_ATOMIC);
+	if (ret)
+		return ret;
+
+	INIT_LIST_HEAD(&preq->td.td_list);
+	preq->td.preq = preq;
+
+	/* Add this TD to the tail of the endpoint ring's TD list. */
+	list_add_tail(&preq->td.td_list, &ep_ring->td_list);
+	ep_ring->num_tds++;
+	preq->pep->stream_info.td_count++;
+
+	preq->td.start_seg = ep_ring->enq_seg;
+	preq->td.first_trb = ep_ring->enqueue;
+
+	return 0;
+}
+
+static unsigned int cdnsp_count_trbs(u64 addr, u64 len)
+{
+	unsigned int num_trbs;
+
+	num_trbs = DIV_ROUND_UP(len + (addr & (TRB_MAX_BUFF_SIZE - 1)),
+				TRB_MAX_BUFF_SIZE);
+	if (num_trbs == 0)
+		num_trbs++;
+
+	return num_trbs;
+}
+
+static unsigned int count_trbs_needed(struct cdnsp_request *preq)
+{
+	return cdnsp_count_trbs(preq->request.dma, preq->request.length);
+}
+
+static unsigned int count_sg_trbs_needed(struct cdnsp_request *preq)
+{
+	unsigned int i, len, full_len, num_trbs = 0;
+	struct scatterlist *sg;
+
+	full_len = preq->request.length;
+
+	for_each_sg(preq->request.sg, sg, preq->request.num_sgs, i) {
+		len = sg_dma_len(sg);
+		num_trbs += cdnsp_count_trbs(sg_dma_address(sg), len);
+		len = min(len, full_len);
+		full_len -= len;
+		if (full_len == 0)
+			break;
+	}
+
+	return num_trbs;
+}
+
+static void cdnsp_check_trb_math(struct cdnsp_request *preq, int running_total)
+{
+	if (running_total != preq->request.length)
+		dev_err(preq->pep->pdev->dev,
+			"%s - Miscalculated tx length, "
+			"queued %#x, asked for %#x (%d)\n",
+			preq->pep->name, running_total,
+			preq->request.length, preq->request.actual);
+}
+
+/*
+ * TD size is the number of max packet sized packets remaining in the TD
+ * (*not* including this TRB).
+ *
+ * Total TD packet count = total_packet_count =
+ *     DIV_ROUND_UP(TD size in bytes / wMaxPacketSize)
+ *
+ * Packets transferred up to and including this TRB = packets_transferred =
+ *     rounddown(total bytes transferred including this TRB / wMaxPacketSize)
+ *
+ * TD size = total_packet_count - packets_transferred
+ *
+ * It must fit in bits 21:17, so it can't be bigger than 31.
+ * This is taken care of in the TRB_TD_SIZE() macro
+ *
+ * The last TRB in a TD must have the TD size set to zero.
+ */
+static u32 cdnsp_td_remainder(struct cdnsp_device *pdev,
+			      int transferred,
+			      int trb_buff_len,
+			      unsigned int td_total_len,
+			      struct cdnsp_request *preq,
+			      bool more_trbs_coming,
+			      bool zlp)
+{
+	u32 maxp, total_packet_count;
+
+	/* Before ZLP driver needs set TD_SIZE = 1. */
+	if (zlp)
+		return 1;
+
+	/* One TRB with a zero-length data packet. */
+	if (!more_trbs_coming || (transferred == 0 && trb_buff_len == 0) ||
+	    trb_buff_len == td_total_len)
+		return 0;
+
+	maxp = usb_endpoint_maxp(preq->pep->endpoint.desc);
+	total_packet_count = DIV_ROUND_UP(td_total_len, maxp);
+
+	/* Queuing functions don't count the current TRB into transferred. */
+	return (total_packet_count - ((transferred + trb_buff_len) / maxp));
+}
+
+static int cdnsp_align_td(struct cdnsp_device *pdev,
+			  struct cdnsp_request *preq, u32 enqd_len,
+			  u32 *trb_buff_len, struct cdnsp_segment *seg)
+{
+	struct device *dev = pdev->dev;
+	unsigned int unalign;
+	unsigned int max_pkt;
+	u32 new_buff_len;
+
+	max_pkt = usb_endpoint_maxp(preq->pep->endpoint.desc);
+	unalign = (enqd_len + *trb_buff_len) % max_pkt;
+
+	/* We got lucky, last normal TRB data on segment is packet aligned. */
+	if (unalign == 0)
+		return 0;
+
+	/* Is the last nornal TRB alignable by splitting it. */
+	if (*trb_buff_len > unalign) {
+		*trb_buff_len -= unalign;
+		trace_cdnsp_bounce_align_td_split(preq, *trb_buff_len,
+						  enqd_len, 0, unalign);
+		return 0;
+	}
+
+	/*
+	 * We want enqd_len + trb_buff_len to sum up to a number aligned to
+	 * number which is divisible by the endpoint's wMaxPacketSize. IOW:
+	 * (size of currently enqueued TRBs + remainder) % wMaxPacketSize == 0.
+	 */
+	new_buff_len = max_pkt - (enqd_len % max_pkt);
+
+	if (new_buff_len > (preq->request.length - enqd_len))
+		new_buff_len = (preq->request.length - enqd_len);
+
+	/* Create a max max_pkt sized bounce buffer pointed to by last trb. */
+	if (preq->direction) {
+		sg_pcopy_to_buffer(preq->request.sg,
+				   preq->request.num_mapped_sgs,
+				   seg->bounce_buf, new_buff_len, enqd_len);
+		seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
+						 max_pkt, DMA_TO_DEVICE);
+	} else {
+		seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
+						 max_pkt, DMA_FROM_DEVICE);
+	}
+
+	if (dma_mapping_error(dev, seg->bounce_dma)) {
+		/* Try without aligning.*/
+		dev_warn(pdev->dev,
+			 "Failed mapping bounce buffer, not aligning\n");
+		return 0;
+	}
+
+	*trb_buff_len = new_buff_len;
+	seg->bounce_len = new_buff_len;
+	seg->bounce_offs = enqd_len;
+
+	trace_cdnsp_bounce_map(preq, new_buff_len, enqd_len, seg->bounce_dma,
+			       unalign);
+
+	/*
+	 * Bounce buffer successful aligned and seg->bounce_dma will be used
+	 * in transfer TRB as new transfer buffer address.
+	 */
+	return 1;
+}
+
+int cdnsp_queue_bulk_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq)
+{
+	unsigned int enqd_len, block_len, trb_buff_len, full_len;
+	unsigned int start_cycle, num_sgs = 0;
+	struct cdnsp_generic_trb *start_trb;
+	u32 field, length_field, remainder;
+	struct scatterlist *sg = NULL;
+	bool more_trbs_coming = true;
+	bool need_zero_pkt = false;
+	bool zero_len_trb = false;
+	struct cdnsp_ring *ring;
+	bool first_trb = true;
+	unsigned int num_trbs;
+	struct cdnsp_ep *pep;
+	u64 addr, send_addr;
+	int sent_len, ret;
+
+	ring = cdnsp_request_to_transfer_ring(pdev, preq);
+	if (!ring)
+		return -EINVAL;
+
+	full_len = preq->request.length;
+
+	if (preq->request.num_sgs) {
+		num_sgs = preq->request.num_sgs;
+		sg = preq->request.sg;
+		addr = (u64)sg_dma_address(sg);
+		block_len = sg_dma_len(sg);
+		num_trbs = count_sg_trbs_needed(preq);
+	} else {
+		num_trbs = count_trbs_needed(preq);
+		addr = (u64)preq->request.dma;
+		block_len = full_len;
+	}
+
+	pep = preq->pep;
+
+	/* Deal with request.zero - need one more td/trb. */
+	if (preq->request.zero && preq->request.length &&
+	    IS_ALIGNED(full_len, usb_endpoint_maxp(pep->endpoint.desc))) {
+		need_zero_pkt = true;
+		num_trbs++;
+	}
+
+	ret = cdnsp_prepare_transfer(pdev, preq, num_trbs);
+	if (ret)
+		return ret;
+
+	/*
+	 * workaround 1: STOP EP command on LINK TRB with TC bit set to 1
+	 * causes that internal cycle bit can have incorrect state after
+	 * command complete. In consequence empty transfer ring can be
+	 * incorrectly detected when EP is resumed.
+	 * NOP TRB before LINK TRB avoid such scenario. STOP EP command is
+	 * then on NOP TRB and internal cycle bit is not changed and have
+	 * correct value.
+	 */
+	if (pep->wa1_nop_trb) {
+		field = le32_to_cpu(pep->wa1_nop_trb->trans_event.flags);
+		field ^= TRB_CYCLE;
+
+		pep->wa1_nop_trb->trans_event.flags = cpu_to_le32(field);
+		pep->wa1_nop_trb = NULL;
+	}
+
+	/*
+	 * Don't give the first TRB to the hardware (by toggling the cycle bit)
+	 * until we've finished creating all the other TRBs. The ring's cycle
+	 * state may change as we enqueue the other TRBs, so save it too.
+	 */
+	start_trb = &ring->enqueue->generic;
+	start_cycle = ring->cycle_state;
+	send_addr = addr;
+
+	/* Queue the TRBs, even if they are zero-length */
+	for (enqd_len = 0; zero_len_trb || first_trb || enqd_len < full_len;
+	     enqd_len += trb_buff_len) {
+		field = TRB_TYPE(TRB_NORMAL);
+
+		/* TRB buffer should not cross 64KB boundaries */
+		trb_buff_len = TRB_BUFF_LEN_UP_TO_BOUNDARY(addr);
+		trb_buff_len = min(trb_buff_len, block_len);
+		if (enqd_len + trb_buff_len > full_len)
+			trb_buff_len = full_len - enqd_len;
+
+		/* Don't change the cycle bit of the first TRB until later */
+		if (first_trb) {
+			first_trb = false;
+			if (start_cycle == 0)
+				field |= TRB_CYCLE;
+		} else {
+			field |= ring->cycle_state;
+		}
+
+		/*
+		 * Chain all the TRBs together; clear the chain bit in the last
+		 * TRB to indicate it's the last TRB in the chain.
+		 */
+		if (enqd_len + trb_buff_len < full_len || need_zero_pkt) {
+			field |= TRB_CHAIN;
+			if (cdnsp_trb_is_link(ring->enqueue + 1)) {
+				if (cdnsp_align_td(pdev, preq, enqd_len,
+						   &trb_buff_len,
+						   ring->enq_seg)) {
+					send_addr = ring->enq_seg->bounce_dma;
+					/* Assuming TD won't span 2 segs */
+					preq->td.bounce_seg = ring->enq_seg;
+				}
+			}
+		}
+
+		if (enqd_len + trb_buff_len >= full_len) {
+			if (need_zero_pkt && !zero_len_trb) {
+				zero_len_trb = true;
+			} else {
+				zero_len_trb = false;
+				field &= ~TRB_CHAIN;
+				field |= TRB_IOC;
+				more_trbs_coming = false;
+				need_zero_pkt = false;
+				preq->td.last_trb = ring->enqueue;
+			}
+		}
+
+		/* Only set interrupt on short packet for OUT endpoints. */
+		if (!preq->direction)
+			field |= TRB_ISP;
+
+		/* Set the TRB length, TD size, and interrupter fields. */
+		remainder = cdnsp_td_remainder(pdev, enqd_len, trb_buff_len,
+					       full_len, preq,
+					       more_trbs_coming,
+					       zero_len_trb);
+
+		length_field = TRB_LEN(trb_buff_len) | TRB_TD_SIZE(remainder) |
+			TRB_INTR_TARGET(0);
+
+		cdnsp_queue_trb(pdev, ring, more_trbs_coming,
+				lower_32_bits(send_addr),
+				upper_32_bits(send_addr),
+				length_field,
+				field);
+
+		addr += trb_buff_len;
+		sent_len = trb_buff_len;
+		while (sg && sent_len >= block_len) {
+			/* New sg entry */
+			--num_sgs;
+			sent_len -= block_len;
+			if (num_sgs != 0) {
+				sg = sg_next(sg);
+				block_len = sg_dma_len(sg);
+				addr = (u64)sg_dma_address(sg);
+				addr += sent_len;
+			}
+		}
+		block_len -= sent_len;
+		send_addr = addr;
+	}
+
+	if (cdnsp_trb_is_link(ring->enqueue + 1)) {
+		field = TRB_TYPE(TRB_TR_NOOP) | TRB_IOC;
+		if (!ring->cycle_state)
+			field |= TRB_CYCLE;
+
+		pep->wa1_nop_trb = ring->enqueue;
+
+		cdnsp_queue_trb(pdev, ring, 0, 0x0, 0x0,
+				TRB_INTR_TARGET(0), field);
+	}
+
+	cdnsp_check_trb_math(preq, enqd_len);
+	ret = cdnsp_giveback_first_trb(pdev, pep, preq->request.stream_id,
+				       start_cycle, start_trb);
+
+	if (ret)
+		preq->td.drbl = 1;
+
+	return 0;
+}
+
+int cdnsp_queue_ctrl_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq)
+{
+	u32 field, length_field, zlp = 0;
+	struct cdnsp_ep *pep = preq->pep;
+	struct cdnsp_ring *ep_ring;
+	int num_trbs;
+	u32 maxp;
+	int ret;
+
+	ep_ring = cdnsp_request_to_transfer_ring(pdev, preq);
+	if (!ep_ring)
+		return -EINVAL;
+
+	/* 1 TRB for data, 1 for status */
+	num_trbs = (pdev->three_stage_setup) ? 2 : 1;
+
+	maxp = usb_endpoint_maxp(pep->endpoint.desc);
+
+	if (preq->request.zero && preq->request.length &&
+	    (preq->request.length % maxp == 0)) {
+		num_trbs++;
+		zlp = 1;
+	}
+
+	ret = cdnsp_prepare_transfer(pdev, preq, num_trbs);
+	if (ret)
+		return ret;
+
+	/* If there's data, queue data TRBs */
+	if (preq->request.length > 0) {
+		field = TRB_TYPE(TRB_DATA);
+
+		if (zlp)
+			field |= TRB_CHAIN;
+		else
+			field |= TRB_IOC | (pdev->ep0_expect_in ? 0 : TRB_ISP);
+
+		if (pdev->ep0_expect_in)
+			field |= TRB_DIR_IN;
+
+		length_field = TRB_LEN(preq->request.length) |
+			       TRB_TD_SIZE(zlp) | TRB_INTR_TARGET(0);
+
+		cdnsp_queue_trb(pdev, ep_ring, true,
+				lower_32_bits(preq->request.dma),
+				upper_32_bits(preq->request.dma), length_field,
+				field | ep_ring->cycle_state |
+				TRB_SETUPID(pdev->setup_id) |
+				pdev->setup_speed);
+
+		if (zlp) {
+			field = TRB_TYPE(TRB_NORMAL) | TRB_IOC;
+
+			if (!pdev->ep0_expect_in)
+				field = TRB_ISP;
+
+			cdnsp_queue_trb(pdev, ep_ring, true,
+					lower_32_bits(preq->request.dma),
+					upper_32_bits(preq->request.dma), 0,
+					field | ep_ring->cycle_state |
+					TRB_SETUPID(pdev->setup_id) |
+					pdev->setup_speed);
+		}
+
+		pdev->ep0_stage = CDNSP_DATA_STAGE;
+	}
+
+	/* Save the DMA address of the last TRB in the TD. */
+	preq->td.last_trb = ep_ring->enqueue;
+
+	/* Queue status TRB. */
+	if (preq->request.length == 0)
+		field = ep_ring->cycle_state;
+	else
+		field = (ep_ring->cycle_state ^ 1);
+
+	if (preq->request.length > 0 && pdev->ep0_expect_in)
+		field |= TRB_DIR_IN;
+
+	if (pep->ep_state & EP0_HALTED_STATUS) {
+		pep->ep_state &= ~EP0_HALTED_STATUS;
+		field |= TRB_SETUPSTAT(TRB_SETUPSTAT_STALL);
+	} else {
+		field |= TRB_SETUPSTAT(TRB_SETUPSTAT_ACK);
+	}
+
+	cdnsp_queue_trb(pdev, ep_ring, false, 0, 0, TRB_INTR_TARGET(0),
+			field | TRB_IOC | TRB_SETUPID(pdev->setup_id) |
+			TRB_TYPE(TRB_STATUS) | pdev->setup_speed);
+
+	cdnsp_ring_ep_doorbell(pdev, pep, preq->request.stream_id);
+
+	return 0;
+}
+
+int cdnsp_cmd_stop_ep(struct cdnsp_device *pdev, struct cdnsp_ep *pep)
+{
+	u32 ep_state = GET_EP_CTX_STATE(pep->out_ctx);
+	int ret = 0;
+
+	if (ep_state == EP_STATE_STOPPED || ep_state == EP_STATE_DISABLED ||
+	    ep_state == EP_STATE_HALTED) {
+		trace_cdnsp_ep_stopped_or_disabled(pep->out_ctx);
+		goto ep_stopped;
+	}
+
+	cdnsp_queue_stop_endpoint(pdev, pep->idx);
+	cdnsp_ring_cmd_db(pdev);
+	ret = cdnsp_wait_for_cmd_compl(pdev);
+
+	trace_cdnsp_handle_cmd_stop_ep(pep->out_ctx);
+
+ep_stopped:
+	pep->ep_state |= EP_STOPPED;
+	return ret;
+}
+
+/*
+ * The transfer burst count field of the isochronous TRB defines the number of
+ * bursts that are required to move all packets in this TD. Only SuperSpeed
+ * devices can burst up to bMaxBurst number of packets per service interval.
+ * This field is zero based, meaning a value of zero in the field means one
+ * burst. Basically, for everything but SuperSpeed devices, this field will be
+ * zero.
+ */
+static unsigned int cdnsp_get_burst_count(struct cdnsp_device *pdev,
+					  struct cdnsp_request *preq,
+					  unsigned int total_packet_count)
+{
+	unsigned int max_burst;
+
+	if (pdev->gadget.speed < USB_SPEED_SUPER)
+		return 0;
+
+	max_burst = preq->pep->endpoint.comp_desc->bMaxBurst;
+	return DIV_ROUND_UP(total_packet_count, max_burst + 1) - 1;
+}
+
+/*
+ * Returns the number of packets in the last "burst" of packets. This field is
+ * valid for all speeds of devices. USB 2.0 devices can only do one "burst", so
+ * the last burst packet count is equal to the total number of packets in the
+ * TD. SuperSpeed endpoints can have up to 3 bursts. All but the last burst
+ * must contain (bMaxBurst + 1) number of packets, but the last burst can
+ * contain 1 to (bMaxBurst + 1) packets.
+ */
+static unsigned int
+	cdnsp_get_last_burst_packet_count(struct cdnsp_device *pdev,
+					  struct cdnsp_request *preq,
+					  unsigned int total_packet_count)
+{
+	unsigned int max_burst;
+	unsigned int residue;
+
+	if (pdev->gadget.speed >= USB_SPEED_SUPER) {
+		/* bMaxBurst is zero based: 0 means 1 packet per burst. */
+		max_burst = preq->pep->endpoint.comp_desc->bMaxBurst;
+		residue = total_packet_count % (max_burst + 1);
+
+		/*
+		 * If residue is zero, the last burst contains (max_burst + 1)
+		 * number of packets, but the TLBPC field is zero-based.
+		 */
+		if (residue == 0)
+			return max_burst;
+
+		return residue - 1;
+	}
+	if (total_packet_count == 0)
+		return 0;
+
+	return total_packet_count - 1;
+}
+
+/* Queue function isoc transfer */
+int cdnsp_queue_isoc_tx(struct cdnsp_device *pdev,
+			struct cdnsp_request *preq)
+{
+	unsigned int trb_buff_len, td_len, td_remain_len, block_len;
+	unsigned int burst_count, last_burst_pkt;
+	unsigned int total_pkt_count, max_pkt;
+	struct cdnsp_generic_trb *start_trb;
+	struct scatterlist *sg = NULL;
+	bool more_trbs_coming = true;
+	struct cdnsp_ring *ep_ring;
+	unsigned int num_sgs = 0;
+	int running_total = 0;
+	u32 field, length_field;
+	u64 addr, send_addr;
+	int start_cycle;
+	int trbs_per_td;
+	int i, sent_len, ret;
+
+	ep_ring = preq->pep->ring;
+
+	td_len = preq->request.length;
+
+	if (preq->request.num_sgs) {
+		num_sgs = preq->request.num_sgs;
+		sg = preq->request.sg;
+		addr = (u64)sg_dma_address(sg);
+		block_len = sg_dma_len(sg);
+		trbs_per_td = count_sg_trbs_needed(preq);
+	} else {
+		addr = (u64)preq->request.dma;
+		block_len = td_len;
+		trbs_per_td = count_trbs_needed(preq);
+	}
+
+	ret = cdnsp_prepare_transfer(pdev, preq, trbs_per_td);
+	if (ret)
+		return ret;
+
+	start_trb = &ep_ring->enqueue->generic;
+	start_cycle = ep_ring->cycle_state;
+	td_remain_len = td_len;
+	send_addr = addr;
+
+	max_pkt = usb_endpoint_maxp(preq->pep->endpoint.desc);
+	total_pkt_count = DIV_ROUND_UP(td_len, max_pkt);
+
+	/* A zero-length transfer still involves at least one packet. */
+	if (total_pkt_count == 0)
+		total_pkt_count++;
+
+	burst_count = cdnsp_get_burst_count(pdev, preq, total_pkt_count);
+	last_burst_pkt = cdnsp_get_last_burst_packet_count(pdev, preq,
+							   total_pkt_count);
+
+	/*
+	 * Set isoc specific data for the first TRB in a TD.
+	 * Prevent HW from getting the TRBs by keeping the cycle state
+	 * inverted in the first TDs isoc TRB.
+	 */
+	field = TRB_TYPE(TRB_ISOC) | TRB_TLBPC(last_burst_pkt) |
+		TRB_SIA | TRB_TBC(burst_count);
+
+	if (!start_cycle)
+		field |= TRB_CYCLE;
+
+	/* Fill the rest of the TRB fields, and remaining normal TRBs. */
+	for (i = 0; i < trbs_per_td; i++) {
+		u32 remainder;
+
+		/* Calculate TRB length. */
+		trb_buff_len = TRB_BUFF_LEN_UP_TO_BOUNDARY(addr);
+		trb_buff_len = min(trb_buff_len, block_len);
+		if (trb_buff_len > td_remain_len)
+			trb_buff_len = td_remain_len;
+
+		/* Set the TRB length, TD size, & interrupter fields. */
+		remainder = cdnsp_td_remainder(pdev, running_total,
+					       trb_buff_len, td_len, preq,
+					       more_trbs_coming, 0);
+
+		length_field = TRB_LEN(trb_buff_len) | TRB_TD_SIZE(remainder) |
+			TRB_INTR_TARGET(0);
+
+		/* Only first TRB is isoc, overwrite otherwise. */
+		if (i) {
+			field = TRB_TYPE(TRB_NORMAL) | ep_ring->cycle_state;
+			length_field |= TRB_TD_SIZE(remainder);
+		} else {
+			length_field |= TRB_TD_SIZE_TBC(burst_count);
+		}
+
+		/* Only set interrupt on short packet for OUT EPs. */
+		if (usb_endpoint_dir_out(preq->pep->endpoint.desc))
+			field |= TRB_ISP;
+
+		/* Set the chain bit for all except the last TRB. */
+		if (i < trbs_per_td - 1) {
+			more_trbs_coming = true;
+			field |= TRB_CHAIN;
+		} else {
+			more_trbs_coming = false;
+			preq->td.last_trb = ep_ring->enqueue;
+			field |= TRB_IOC;
+		}
+
+		cdnsp_queue_trb(pdev, ep_ring, more_trbs_coming,
+				lower_32_bits(send_addr), upper_32_bits(send_addr),
+				length_field, field);
+
+		running_total += trb_buff_len;
+		addr += trb_buff_len;
+		td_remain_len -= trb_buff_len;
+
+		sent_len = trb_buff_len;
+		while (sg && sent_len >= block_len) {
+			/* New sg entry */
+			--num_sgs;
+			sent_len -= block_len;
+			if (num_sgs != 0) {
+				sg = sg_next(sg);
+				block_len = sg_dma_len(sg);
+				addr = (u64)sg_dma_address(sg);
+				addr += sent_len;
+			}
+		}
+		block_len -= sent_len;
+		send_addr = addr;
+	}
+
+	/* Check TD length */
+	if (running_total != td_len) {
+		dev_err(pdev->dev, "ISOC TD length unmatch\n");
+		ret = -EINVAL;
+		goto cleanup;
+	}
+
+	cdnsp_giveback_first_trb(pdev, preq->pep, preq->request.stream_id,
+				 start_cycle, start_trb);
+
+	return 0;
+
+cleanup:
+	/* Clean up a partially enqueued isoc transfer. */
+	list_del_init(&preq->td.td_list);
+	ep_ring->num_tds--;
+
+	/*
+	 * Use the first TD as a temporary variable to turn the TDs we've
+	 * queued into No-ops with a software-owned cycle bit.
+	 * That way the hardware won't accidentally start executing bogus TDs
+	 * when we partially overwrite them.
+	 * td->first_trb and td->start_seg are already set.
+	 */
+	preq->td.last_trb = ep_ring->enqueue;
+	/* Every TRB except the first & last will have its cycle bit flipped. */
+	cdnsp_td_to_noop(pdev, ep_ring, &preq->td, true);
+
+	/* Reset the ring enqueue back to the first TRB and its cycle bit. */
+	ep_ring->enqueue = preq->td.first_trb;
+	ep_ring->enq_seg = preq->td.start_seg;
+	ep_ring->cycle_state = start_cycle;
+	return ret;
+}
+
+/****		Command Ring Operations		****/
+/*
+ * Generic function for queuing a command TRB on the command ring.
+ * Driver queue only one command to ring in the moment.
+ */
+static void cdnsp_queue_command(struct cdnsp_device *pdev,
+				u32 field1,
+				u32 field2,
+				u32 field3,
+				u32 field4)
+{
+	cdnsp_prepare_ring(pdev, pdev->cmd_ring, EP_STATE_RUNNING, 1,
+			   GFP_ATOMIC);
+
+	pdev->cmd.command_trb = pdev->cmd_ring->enqueue;
+
+	cdnsp_queue_trb(pdev, pdev->cmd_ring, false, field1, field2,
+			field3, field4 | pdev->cmd_ring->cycle_state);
+}
+
+/* Queue a slot enable or disable request on the command ring */
+void cdnsp_queue_slot_control(struct cdnsp_device *pdev, u32 trb_type)
+{
+	cdnsp_queue_command(pdev, 0, 0, 0, TRB_TYPE(trb_type) |
+			    SLOT_ID_FOR_TRB(pdev->slot_id));
+}
+
+/* Queue an address device command TRB */
+void cdnsp_queue_address_device(struct cdnsp_device *pdev,
+				dma_addr_t in_ctx_ptr,
+				enum cdnsp_setup_dev setup)
+{
+	cdnsp_queue_command(pdev, lower_32_bits(in_ctx_ptr),
+			    upper_32_bits(in_ctx_ptr), 0,
+			    TRB_TYPE(TRB_ADDR_DEV) |
+			    SLOT_ID_FOR_TRB(pdev->slot_id) |
+			    (setup == SETUP_CONTEXT_ONLY ? TRB_BSR : 0));
+}
+
+/* Queue a reset device command TRB */
+void cdnsp_queue_reset_device(struct cdnsp_device *pdev)
+{
+	cdnsp_queue_command(pdev, 0, 0, 0, TRB_TYPE(TRB_RESET_DEV) |
+			    SLOT_ID_FOR_TRB(pdev->slot_id));
+}
+
+/* Queue a configure endpoint command TRB */
+void cdnsp_queue_configure_endpoint(struct cdnsp_device *pdev,
+				    dma_addr_t in_ctx_ptr)
+{
+	cdnsp_queue_command(pdev, lower_32_bits(in_ctx_ptr),
+			    upper_32_bits(in_ctx_ptr), 0,
+			    TRB_TYPE(TRB_CONFIG_EP) |
+			    SLOT_ID_FOR_TRB(pdev->slot_id));
+}
+
+/*
+ * Suspend is set to indicate "Stop Endpoint Command" is being issued to stop
+ * activity on an endpoint that is about to be suspended.
+ */
+void cdnsp_queue_stop_endpoint(struct cdnsp_device *pdev, unsigned int ep_index)
+{
+	cdnsp_queue_command(pdev, 0, 0, 0, SLOT_ID_FOR_TRB(pdev->slot_id) |
+			    EP_ID_FOR_TRB(ep_index) | TRB_TYPE(TRB_STOP_RING));
+}
+
+/* Set Transfer Ring Dequeue Pointer command. */
+void cdnsp_queue_new_dequeue_state(struct cdnsp_device *pdev,
+				   struct cdnsp_ep *pep,
+				   struct cdnsp_dequeue_state *deq_state)
+{
+	u32 trb_stream_id = STREAM_ID_FOR_TRB(deq_state->stream_id);
+	u32 trb_slot_id = SLOT_ID_FOR_TRB(pdev->slot_id);
+	u32 type = TRB_TYPE(TRB_SET_DEQ);
+	u32 trb_sct = 0;
+	dma_addr_t addr;
+
+	addr = cdnsp_trb_virt_to_dma(deq_state->new_deq_seg,
+				     deq_state->new_deq_ptr);
+
+	if (deq_state->stream_id)
+		trb_sct = SCT_FOR_TRB(SCT_PRI_TR);
+
+	cdnsp_queue_command(pdev, lower_32_bits(addr) | trb_sct |
+			    deq_state->new_cycle_state, upper_32_bits(addr),
+			    trb_stream_id, trb_slot_id |
+			    EP_ID_FOR_TRB(pep->idx) | type);
+}
+
+void cdnsp_queue_reset_ep(struct cdnsp_device *pdev, unsigned int ep_index)
+{
+	return cdnsp_queue_command(pdev, 0, 0, 0,
+				   SLOT_ID_FOR_TRB(pdev->slot_id) |
+				   EP_ID_FOR_TRB(ep_index) |
+				   TRB_TYPE(TRB_RESET_EP));
+}
+
+/*
+ * Queue a halt endpoint request on the command ring.
+ */
+void cdnsp_queue_halt_endpoint(struct cdnsp_device *pdev, unsigned int ep_index)
+{
+	cdnsp_queue_command(pdev, 0, 0, 0, TRB_TYPE(TRB_HALT_ENDPOINT) |
+			    SLOT_ID_FOR_TRB(pdev->slot_id) |
+			    EP_ID_FOR_TRB(ep_index) |
+			    (!ep_index ? TRB_ESP : 0));
+}
+
+void cdnsp_force_header_wakeup(struct cdnsp_device *pdev, int intf_num)
+{
+	u32 lo, mid;
+
+	lo = TRB_FH_TO_PACKET_TYPE(TRB_FH_TR_PACKET) |
+	     TRB_FH_TO_DEVICE_ADDRESS(pdev->device_address);
+	mid = TRB_FH_TR_PACKET_DEV_NOT |
+	      TRB_FH_TO_NOT_TYPE(TRB_FH_TR_PACKET_FUNCTION_WAKE) |
+	      TRB_FH_TO_INTERFACE(intf_num);
+
+	cdnsp_queue_command(pdev, lo, mid, 0,
+			    TRB_TYPE(TRB_FORCE_HEADER) | SET_PORT_ID(2));
+}
diff --git a/drivers/usb/cdns3/cdnsp-trace.c b/drivers/usb/cdns3/cdnsp-trace.c
new file mode 100644
index 000000000..e50ab799a
--- /dev/null
+++ b/drivers/usb/cdns3/cdnsp-trace.c
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence CDNSP DRD Driver.
+ *
+ * Copyright (C) 2020 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ *
+ */
+
+#define CREATE_TRACE_POINTS
+#include "cdnsp-trace.h"
diff --git a/drivers/usb/cdns3/cdnsp-trace.h b/drivers/usb/cdns3/cdnsp-trace.h
new file mode 100644
index 000000000..9b33a736c
--- /dev/null
+++ b/drivers/usb/cdns3/cdnsp-trace.h
@@ -0,0 +1,801 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Cadence CDNSP DRD Driver.
+ * Trace support header file
+ *
+ * Copyright (C) 2020 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ *
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM cdnsp-dev
+
+/*
+ * The TRACE_SYSTEM_VAR defaults to TRACE_SYSTEM, but must be a
+ * legitimate C variable. It is not exported to user space.
+ */
+#undef TRACE_SYSTEM_VAR
+#define TRACE_SYSTEM_VAR cdnsp_dev
+
+#if !defined(__CDNSP_DEV_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define __CDNSP_DEV_TRACE_H
+
+#include <linux/tracepoint.h>
+#include "cdnsp-gadget.h"
+#include "cdnsp-debug.h"
+
+/*
+ * There is limitation for single buffer size in TRACEPOINT subsystem.
+ * By default TRACE_BUF_SIZE is 1024, so no all data will be logged.
+ * To show more data this must be increased. In most cases the default
+ * value is sufficient.
+ */
+#define CDNSP_MSG_MAX 500
+
+DECLARE_EVENT_CLASS(cdnsp_log_ep,
+	TP_PROTO(struct cdnsp_ep *pep, u32 stream_id),
+	TP_ARGS(pep, stream_id),
+	TP_STRUCT__entry(
+		__string(name, pep->name)
+		__field(unsigned int, state)
+		__field(u32, stream_id)
+		__field(u8, enabled)
+		__field(unsigned int, num_streams)
+		__field(int, td_count)
+		__field(u8, first_prime_det)
+		__field(u8, drbls_count)
+	),
+	TP_fast_assign(
+		__assign_str(name);
+		__entry->state = pep->ep_state;
+		__entry->stream_id = stream_id;
+		__entry->enabled = pep->ep_state & EP_HAS_STREAMS;
+		__entry->num_streams = pep->stream_info.num_streams;
+		__entry->td_count = pep->stream_info.td_count;
+		__entry->first_prime_det = pep->stream_info.first_prime_det;
+		__entry->drbls_count = pep->stream_info.drbls_count;
+	),
+	TP_printk("%s: SID: %08x, ep state: %x, stream: enabled: %d num %d "
+		  "tds %d, first prime: %d drbls %d",
+		  __get_str(name), __entry->stream_id, __entry->state,
+		  __entry->enabled, __entry->num_streams, __entry->td_count,
+		  __entry->first_prime_det, __entry->drbls_count)
+);
+
+DEFINE_EVENT(cdnsp_log_ep, cdnsp_tr_drbl,
+	TP_PROTO(struct cdnsp_ep *pep, u32 stream_id),
+	TP_ARGS(pep, stream_id)
+);
+
+DEFINE_EVENT(cdnsp_log_ep, cdnsp_wait_for_prime,
+	TP_PROTO(struct cdnsp_ep *pep, u32 stream_id),
+	TP_ARGS(pep, stream_id)
+);
+
+DEFINE_EVENT(cdnsp_log_ep, cdnsp_ep_list_empty_with_skip,
+	TP_PROTO(struct cdnsp_ep *pep, u32 stream_id),
+	TP_ARGS(pep, stream_id)
+);
+
+DEFINE_EVENT(cdnsp_log_ep, cdnsp_ep_enable_end,
+	TP_PROTO(struct cdnsp_ep *pep, u32 stream_id),
+	TP_ARGS(pep, stream_id)
+);
+
+DEFINE_EVENT(cdnsp_log_ep, cdnsp_ep_disable_end,
+	TP_PROTO(struct cdnsp_ep *pep, u32 stream_id),
+	TP_ARGS(pep, stream_id)
+);
+
+DEFINE_EVENT(cdnsp_log_ep, cdnsp_ep_busy_try_halt_again,
+	TP_PROTO(struct cdnsp_ep *pep, u32 stream_id),
+	TP_ARGS(pep, stream_id)
+);
+
+DECLARE_EVENT_CLASS(cdnsp_log_enable_disable,
+	TP_PROTO(int set),
+	TP_ARGS(set),
+	TP_STRUCT__entry(
+		__field(int, set)
+	),
+	TP_fast_assign(
+		__entry->set = set;
+	),
+	TP_printk("%s", __entry->set ? "enabled" : "disabled")
+);
+
+DEFINE_EVENT(cdnsp_log_enable_disable, cdnsp_pullup,
+	TP_PROTO(int set),
+	TP_ARGS(set)
+);
+
+DEFINE_EVENT(cdnsp_log_enable_disable, cdnsp_u1,
+	TP_PROTO(int set),
+	TP_ARGS(set)
+);
+
+DEFINE_EVENT(cdnsp_log_enable_disable, cdnsp_u2,
+	TP_PROTO(int set),
+	TP_ARGS(set)
+);
+
+DEFINE_EVENT(cdnsp_log_enable_disable, cdnsp_lpm,
+	TP_PROTO(int set),
+	TP_ARGS(set)
+);
+
+DEFINE_EVENT(cdnsp_log_enable_disable, cdnsp_may_wakeup,
+	TP_PROTO(int set),
+	TP_ARGS(set)
+);
+
+DECLARE_EVENT_CLASS(cdnsp_log_simple,
+	TP_PROTO(char *msg),
+	TP_ARGS(msg),
+	TP_STRUCT__entry(
+		__string(text, msg)
+	),
+	TP_fast_assign(
+		__assign_str(text);
+	),
+	TP_printk("%s", __get_str(text))
+);
+
+DEFINE_EVENT(cdnsp_log_simple, cdnsp_exit,
+	TP_PROTO(char *msg),
+	TP_ARGS(msg)
+);
+
+DEFINE_EVENT(cdnsp_log_simple, cdnsp_init,
+	TP_PROTO(char *msg),
+	TP_ARGS(msg)
+);
+
+DEFINE_EVENT(cdnsp_log_simple, cdnsp_slot_id,
+	TP_PROTO(char *msg),
+	TP_ARGS(msg)
+);
+
+DEFINE_EVENT(cdnsp_log_simple, cdnsp_no_room_on_ring,
+	TP_PROTO(char *msg),
+	TP_ARGS(msg)
+);
+
+DEFINE_EVENT(cdnsp_log_simple, cdnsp_ep0_status_stage,
+	TP_PROTO(char *msg),
+	TP_ARGS(msg)
+);
+
+DEFINE_EVENT(cdnsp_log_simple, cdnsp_ep0_request,
+	TP_PROTO(char *msg),
+	TP_ARGS(msg)
+);
+
+DEFINE_EVENT(cdnsp_log_simple, cdnsp_ep0_set_config,
+	TP_PROTO(char *msg),
+	TP_ARGS(msg)
+);
+
+DEFINE_EVENT(cdnsp_log_simple, cdnsp_ep_halt,
+	TP_PROTO(char *msg),
+	TP_ARGS(msg)
+);
+
+TRACE_EVENT(cdnsp_looking_trb_in_td,
+	TP_PROTO(dma_addr_t suspect, dma_addr_t trb_start, dma_addr_t trb_end,
+		 dma_addr_t curr_seg, dma_addr_t end_seg),
+	TP_ARGS(suspect, trb_start, trb_end, curr_seg, end_seg),
+	TP_STRUCT__entry(
+		__field(dma_addr_t, suspect)
+		__field(dma_addr_t, trb_start)
+		__field(dma_addr_t, trb_end)
+		__field(dma_addr_t, curr_seg)
+		__field(dma_addr_t, end_seg)
+	),
+	TP_fast_assign(
+		__entry->suspect = suspect;
+		__entry->trb_start = trb_start;
+		__entry->trb_end = trb_end;
+		__entry->curr_seg = curr_seg;
+		__entry->end_seg = end_seg;
+	),
+	TP_printk("DMA: suspect event: %pad, trb-start: %pad, trb-end %pad, "
+		  "seg-start %pad, seg-end %pad",
+		  &__entry->suspect, &__entry->trb_start, &__entry->trb_end,
+		  &__entry->curr_seg, &__entry->end_seg)
+);
+
+TRACE_EVENT(cdnsp_port_info,
+	TP_PROTO(__le32 __iomem *addr, u32 offset, u32 count, u32 rev),
+	TP_ARGS(addr, offset, count, rev),
+	TP_STRUCT__entry(
+		__field(__le32 __iomem *, addr)
+		__field(u32, offset)
+		__field(u32, count)
+		__field(u32, rev)
+	),
+	TP_fast_assign(
+		__entry->addr = addr;
+		__entry->offset = offset;
+		__entry->count = count;
+		__entry->rev = rev;
+	),
+	TP_printk("Ext Cap %p, port offset = %u, count = %u, rev = 0x%x",
+		  __entry->addr, __entry->offset, __entry->count, __entry->rev)
+);
+
+DECLARE_EVENT_CLASS(cdnsp_log_deq_state,
+	TP_PROTO(struct cdnsp_dequeue_state *state),
+	TP_ARGS(state),
+	TP_STRUCT__entry(
+		__field(int, new_cycle_state)
+		__field(struct cdnsp_segment *, new_deq_seg)
+		__field(dma_addr_t, deq_seg_dma)
+		__field(union cdnsp_trb	*, new_deq_ptr)
+		__field(dma_addr_t, deq_ptr_dma)
+	),
+	TP_fast_assign(
+		__entry->new_cycle_state = state->new_cycle_state;
+		__entry->new_deq_seg = state->new_deq_seg;
+		__entry->deq_seg_dma = state->new_deq_seg->dma;
+		__entry->new_deq_ptr = state->new_deq_ptr,
+		__entry->deq_ptr_dma = cdnsp_trb_virt_to_dma(state->new_deq_seg,
+							     state->new_deq_ptr);
+	),
+	TP_printk("New cycle state = 0x%x, New dequeue segment = %p (0x%pad dma), "
+		  "New dequeue pointer = %p (0x%pad dma)",
+		  __entry->new_cycle_state, __entry->new_deq_seg,
+		  &__entry->deq_seg_dma, __entry->new_deq_ptr,
+		  &__entry->deq_ptr_dma
+	)
+);
+
+DEFINE_EVENT(cdnsp_log_deq_state, cdnsp_new_deq_state,
+	TP_PROTO(struct cdnsp_dequeue_state *state),
+	TP_ARGS(state)
+);
+
+DECLARE_EVENT_CLASS(cdnsp_log_ctrl,
+	TP_PROTO(struct usb_ctrlrequest *ctrl),
+	TP_ARGS(ctrl),
+	TP_STRUCT__entry(
+		__field(u8, bRequestType)
+		__field(u8, bRequest)
+		__field(u16, wValue)
+		__field(u16, wIndex)
+		__field(u16, wLength)
+	),
+	TP_fast_assign(
+		__entry->bRequestType = ctrl->bRequestType;
+		__entry->bRequest = ctrl->bRequest;
+		__entry->wValue = le16_to_cpu(ctrl->wValue);
+		__entry->wIndex = le16_to_cpu(ctrl->wIndex);
+		__entry->wLength = le16_to_cpu(ctrl->wLength);
+	),
+	TP_printk("%s", usb_decode_ctrl(__get_buf(CDNSP_MSG_MAX), CDNSP_MSG_MAX,
+					__entry->bRequestType,
+					__entry->bRequest, __entry->wValue,
+					__entry->wIndex, __entry->wLength)
+	)
+);
+
+DEFINE_EVENT(cdnsp_log_ctrl, cdnsp_ctrl_req,
+	TP_PROTO(struct usb_ctrlrequest *ctrl),
+	TP_ARGS(ctrl)
+);
+
+DECLARE_EVENT_CLASS(cdnsp_log_bounce,
+	TP_PROTO(struct cdnsp_request *preq, u32 new_buf_len, u32 offset,
+		 dma_addr_t dma, unsigned int unalign),
+	TP_ARGS(preq, new_buf_len, offset, dma, unalign),
+	TP_STRUCT__entry(
+		__string(name, preq->pep->name)
+		__field(u32, new_buf_len)
+		__field(u32, offset)
+		__field(dma_addr_t, dma)
+		__field(unsigned int, unalign)
+	),
+	TP_fast_assign(
+		__assign_str(name);
+		__entry->new_buf_len = new_buf_len;
+		__entry->offset = offset;
+		__entry->dma = dma;
+		__entry->unalign = unalign;
+	),
+	TP_printk("%s buf len %d, offset %d, dma %pad, unalign %d",
+		  __get_str(name), __entry->new_buf_len,
+		  __entry->offset, &__entry->dma, __entry->unalign
+	)
+);
+
+DEFINE_EVENT(cdnsp_log_bounce, cdnsp_bounce_align_td_split,
+	TP_PROTO(struct cdnsp_request *preq, u32 new_buf_len, u32 offset,
+		 dma_addr_t dma, unsigned int unalign),
+	TP_ARGS(preq, new_buf_len, offset, dma, unalign)
+);
+
+DEFINE_EVENT(cdnsp_log_bounce, cdnsp_bounce_map,
+	TP_PROTO(struct cdnsp_request *preq, u32 new_buf_len, u32 offset,
+		 dma_addr_t dma, unsigned int unalign),
+	TP_ARGS(preq, new_buf_len, offset, dma, unalign)
+);
+
+DEFINE_EVENT(cdnsp_log_bounce, cdnsp_bounce_unmap,
+	TP_PROTO(struct cdnsp_request *preq, u32 new_buf_len, u32 offset,
+		 dma_addr_t dma, unsigned int unalign),
+	TP_ARGS(preq, new_buf_len, offset, dma, unalign)
+);
+
+DECLARE_EVENT_CLASS(cdnsp_log_trb,
+	TP_PROTO(struct cdnsp_ring *ring, struct cdnsp_generic_trb *trb),
+	TP_ARGS(ring, trb),
+	TP_STRUCT__entry(
+		__field(u32, type)
+		__field(u32, field0)
+		__field(u32, field1)
+		__field(u32, field2)
+		__field(u32, field3)
+		__field(union cdnsp_trb *, trb)
+		__field(dma_addr_t, trb_dma)
+	),
+	TP_fast_assign(
+		__entry->type = ring->type;
+		__entry->field0 = le32_to_cpu(trb->field[0]);
+		__entry->field1 = le32_to_cpu(trb->field[1]);
+		__entry->field2 = le32_to_cpu(trb->field[2]);
+		__entry->field3 = le32_to_cpu(trb->field[3]);
+		__entry->trb = (union cdnsp_trb *)trb;
+		__entry->trb_dma = cdnsp_trb_virt_to_dma(ring->deq_seg,
+							 (union cdnsp_trb *)trb);
+
+	),
+	TP_printk("%s: %s trb: %p(%pad)", cdnsp_ring_type_string(__entry->type),
+		  cdnsp_decode_trb(__get_buf(CDNSP_MSG_MAX), CDNSP_MSG_MAX,
+				   __entry->field0, __entry->field1,
+				   __entry->field2, __entry->field3),
+				   __entry->trb, &__entry->trb_dma
+	)
+);
+
+DEFINE_EVENT(cdnsp_log_trb, cdnsp_handle_event,
+	TP_PROTO(struct cdnsp_ring *ring, struct cdnsp_generic_trb *trb),
+	TP_ARGS(ring, trb)
+);
+
+DEFINE_EVENT(cdnsp_log_trb, cdnsp_trb_without_td,
+	TP_PROTO(struct cdnsp_ring *ring, struct cdnsp_generic_trb *trb),
+	TP_ARGS(ring, trb)
+);
+
+DEFINE_EVENT(cdnsp_log_trb, cdnsp_handle_command,
+	TP_PROTO(struct cdnsp_ring *ring, struct cdnsp_generic_trb *trb),
+	TP_ARGS(ring, trb)
+);
+
+DEFINE_EVENT(cdnsp_log_trb, cdnsp_handle_transfer,
+	TP_PROTO(struct cdnsp_ring *ring, struct cdnsp_generic_trb *trb),
+	TP_ARGS(ring, trb)
+);
+
+DEFINE_EVENT(cdnsp_log_trb, cdnsp_queue_trb,
+	TP_PROTO(struct cdnsp_ring *ring, struct cdnsp_generic_trb *trb),
+	TP_ARGS(ring, trb)
+);
+
+DEFINE_EVENT(cdnsp_log_trb, cdnsp_cmd_wait_for_compl,
+	TP_PROTO(struct cdnsp_ring *ring, struct cdnsp_generic_trb *trb),
+	TP_ARGS(ring, trb)
+);
+
+DEFINE_EVENT(cdnsp_log_trb, cdnsp_cmd_timeout,
+	TP_PROTO(struct cdnsp_ring *ring, struct cdnsp_generic_trb *trb),
+	TP_ARGS(ring, trb)
+);
+
+DECLARE_EVENT_CLASS(cdnsp_log_pdev,
+	TP_PROTO(struct cdnsp_device *pdev),
+	TP_ARGS(pdev),
+	TP_STRUCT__entry(
+		__field(struct cdnsp_device *, pdev)
+		__field(struct usb_gadget *, gadget)
+		__field(dma_addr_t, out_ctx)
+		__field(dma_addr_t, in_ctx)
+		__field(u8, port_num)
+	),
+	TP_fast_assign(
+		__entry->pdev = pdev;
+		__entry->gadget = &pdev->gadget;
+		__entry->in_ctx = pdev->in_ctx.dma;
+		__entry->out_ctx = pdev->out_ctx.dma;
+		__entry->port_num = pdev->active_port ?
+				pdev->active_port->port_num : 0xFF;
+	),
+	TP_printk("pdev %p gadget %p ctx %pad | %pad, port %d ",
+		  __entry->pdev, __entry->gadget, &__entry->in_ctx,
+		  &__entry->out_ctx, __entry->port_num
+	)
+);
+
+DEFINE_EVENT(cdnsp_log_pdev, cdnsp_alloc_priv_device,
+	TP_PROTO(struct cdnsp_device *vdev),
+	TP_ARGS(vdev)
+);
+
+DEFINE_EVENT(cdnsp_log_pdev, cdnsp_setup_addressable_priv_device,
+	TP_PROTO(struct cdnsp_device *vdev),
+	TP_ARGS(vdev)
+);
+
+DECLARE_EVENT_CLASS(cdnsp_log_request,
+	TP_PROTO(struct cdnsp_request *req),
+	TP_ARGS(req),
+	TP_STRUCT__entry(
+		__string(name, req->pep->name)
+		__field(struct usb_request *, request)
+		__field(struct cdnsp_request *, preq)
+		__field(void *, buf)
+		__field(unsigned int, actual)
+		__field(unsigned int, length)
+		__field(int, status)
+		__field(dma_addr_t, dma)
+		__field(unsigned int, stream_id)
+		__field(unsigned int, zero)
+		__field(unsigned int, short_not_ok)
+		__field(unsigned int, no_interrupt)
+		__field(struct scatterlist*, sg)
+		__field(unsigned int, num_sgs)
+		__field(unsigned int, num_mapped_sgs)
+
+	),
+	TP_fast_assign(
+		__assign_str(name);
+		__entry->request = &req->request;
+		__entry->preq = req;
+		__entry->buf = req->request.buf;
+		__entry->actual = req->request.actual;
+		__entry->length = req->request.length;
+		__entry->status = req->request.status;
+		__entry->dma = req->request.dma;
+		__entry->stream_id = req->request.stream_id;
+		__entry->zero = req->request.zero;
+		__entry->short_not_ok = req->request.short_not_ok;
+		__entry->no_interrupt = req->request.no_interrupt;
+		__entry->sg = req->request.sg;
+		__entry->num_sgs = req->request.num_sgs;
+		__entry->num_mapped_sgs = req->request.num_mapped_sgs;
+	),
+	TP_printk("%s; req U:%p/P:%p, req buf %p, length %u/%u, status %d, "
+		  "buf dma (%pad), SID %u, %s%s%s, sg %p, num_sg %d,"
+		  " num_m_sg %d",
+		  __get_str(name), __entry->request, __entry->preq,
+		  __entry->buf, __entry->actual, __entry->length,
+		  __entry->status, &__entry->dma,
+		  __entry->stream_id, __entry->zero ? "Z" : "z",
+		  __entry->short_not_ok ? "S" : "s",
+		  __entry->no_interrupt ? "I" : "i",
+		  __entry->sg, __entry->num_sgs, __entry->num_mapped_sgs
+		)
+);
+
+DEFINE_EVENT(cdnsp_log_request, cdnsp_request_enqueue,
+	TP_PROTO(struct cdnsp_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdnsp_log_request, cdnsp_request_enqueue_busy,
+	TP_PROTO(struct cdnsp_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdnsp_log_request, cdnsp_request_enqueue_error,
+	TP_PROTO(struct cdnsp_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdnsp_log_request, cdnsp_request_dequeue,
+	TP_PROTO(struct cdnsp_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdnsp_log_request, cdnsp_request_giveback,
+	TP_PROTO(struct cdnsp_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdnsp_log_request, cdnsp_alloc_request,
+	TP_PROTO(struct cdnsp_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdnsp_log_request, cdnsp_free_request,
+	TP_PROTO(struct cdnsp_request *req),
+	TP_ARGS(req)
+);
+
+DECLARE_EVENT_CLASS(cdnsp_log_ep_ctx,
+	TP_PROTO(struct cdnsp_ep_ctx *ctx),
+	TP_ARGS(ctx),
+	TP_STRUCT__entry(
+		__field(u32, info)
+		__field(u32, info2)
+		__field(u64, deq)
+		__field(u32, tx_info)
+	),
+	TP_fast_assign(
+		__entry->info = le32_to_cpu(ctx->ep_info);
+		__entry->info2 = le32_to_cpu(ctx->ep_info2);
+		__entry->deq = le64_to_cpu(ctx->deq);
+		__entry->tx_info = le32_to_cpu(ctx->tx_info);
+	),
+	TP_printk("%s", cdnsp_decode_ep_context(__get_buf(CDNSP_MSG_MAX), CDNSP_MSG_MAX,
+						__entry->info, __entry->info2,
+						__entry->deq, __entry->tx_info)
+	)
+);
+
+DEFINE_EVENT(cdnsp_log_ep_ctx, cdnsp_ep_disabled,
+	TP_PROTO(struct cdnsp_ep_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_ep_ctx, cdnsp_ep_stopped_or_disabled,
+	TP_PROTO(struct cdnsp_ep_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_ep_ctx, cdnsp_remove_request,
+	TP_PROTO(struct cdnsp_ep_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_ep_ctx, cdnsp_handle_cmd_stop_ep,
+	TP_PROTO(struct cdnsp_ep_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_ep_ctx, cdnsp_handle_cmd_set_deq_ep,
+	TP_PROTO(struct cdnsp_ep_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_ep_ctx, cdnsp_handle_cmd_reset_ep,
+	TP_PROTO(struct cdnsp_ep_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_ep_ctx, cdnsp_handle_cmd_config_ep,
+	TP_PROTO(struct cdnsp_ep_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DECLARE_EVENT_CLASS(cdnsp_log_slot_ctx,
+	TP_PROTO(struct cdnsp_slot_ctx *ctx),
+	TP_ARGS(ctx),
+	TP_STRUCT__entry(
+		__field(u32, info)
+		__field(u32, info2)
+		__field(u32, int_target)
+		__field(u32, state)
+	),
+	TP_fast_assign(
+		__entry->info = le32_to_cpu(ctx->dev_info);
+		__entry->info2 = le32_to_cpu(ctx->dev_port);
+		__entry->int_target = le32_to_cpu(ctx->int_target);
+		__entry->state = le32_to_cpu(ctx->dev_state);
+	),
+	TP_printk("%s", cdnsp_decode_slot_context(__entry->info,
+						  __entry->info2,
+						  __entry->int_target,
+						  __entry->state)
+	)
+);
+
+DEFINE_EVENT(cdnsp_log_slot_ctx, cdnsp_slot_already_in_default,
+	TP_PROTO(struct cdnsp_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_slot_ctx, cdnsp_handle_cmd_enable_slot,
+	TP_PROTO(struct cdnsp_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_slot_ctx, cdnsp_handle_cmd_disable_slot,
+	TP_PROTO(struct cdnsp_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_slot_ctx, cdnsp_reset_device,
+	TP_PROTO(struct cdnsp_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_slot_ctx, cdnsp_setup_device_slot,
+	TP_PROTO(struct cdnsp_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_slot_ctx, cdnsp_handle_cmd_addr_dev,
+	TP_PROTO(struct cdnsp_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_slot_ctx, cdnsp_handle_cmd_reset_dev,
+	TP_PROTO(struct cdnsp_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_slot_ctx, cdnsp_handle_cmd_set_deq,
+	TP_PROTO(struct cdnsp_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DEFINE_EVENT(cdnsp_log_slot_ctx, cdnsp_configure_endpoint,
+	TP_PROTO(struct cdnsp_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
+DECLARE_EVENT_CLASS(cdnsp_log_td_info,
+	TP_PROTO(struct cdnsp_request *preq),
+	TP_ARGS(preq),
+	TP_STRUCT__entry(
+		__string(name, preq->pep->name)
+		__field(struct usb_request *, request)
+		__field(struct cdnsp_request *, preq)
+		__field(union cdnsp_trb *, first_trb)
+		__field(union cdnsp_trb *, last_trb)
+		__field(dma_addr_t, trb_dma)
+	),
+	TP_fast_assign(
+		__assign_str(name);
+		__entry->request = &preq->request;
+		__entry->preq = preq;
+		__entry->first_trb = preq->td.first_trb;
+		__entry->last_trb = preq->td.last_trb;
+		__entry->trb_dma = cdnsp_trb_virt_to_dma(preq->td.start_seg,
+							 preq->td.first_trb)
+	),
+	TP_printk("%s req/preq:  %p/%p, first trb %p[vir]/%pad(dma), last trb %p",
+		  __get_str(name), __entry->request, __entry->preq,
+		  __entry->first_trb, &__entry->trb_dma,
+		  __entry->last_trb
+		)
+);
+
+DEFINE_EVENT(cdnsp_log_td_info, cdnsp_remove_request_td,
+	TP_PROTO(struct cdnsp_request *preq),
+	TP_ARGS(preq)
+);
+
+DECLARE_EVENT_CLASS(cdnsp_log_ring,
+	TP_PROTO(struct cdnsp_ring *ring),
+	TP_ARGS(ring),
+	TP_STRUCT__entry(
+		__field(u32, type)
+		__field(void *, ring)
+		__field(dma_addr_t, enq)
+		__field(dma_addr_t, deq)
+		__field(dma_addr_t, enq_seg)
+		__field(dma_addr_t, deq_seg)
+		__field(unsigned int, num_segs)
+		__field(unsigned int, stream_id)
+		__field(unsigned int, cycle_state)
+		__field(unsigned int, num_trbs_free)
+		__field(unsigned int, bounce_buf_len)
+	),
+	TP_fast_assign(
+		__entry->ring = ring;
+		__entry->type = ring->type;
+		__entry->num_segs = ring->num_segs;
+		__entry->stream_id = ring->stream_id;
+		__entry->enq_seg = ring->enq_seg->dma;
+		__entry->deq_seg = ring->deq_seg->dma;
+		__entry->cycle_state = ring->cycle_state;
+		__entry->num_trbs_free = ring->num_trbs_free;
+		__entry->bounce_buf_len = ring->bounce_buf_len;
+		__entry->enq = cdnsp_trb_virt_to_dma(ring->enq_seg,
+						     ring->enqueue);
+		__entry->deq = cdnsp_trb_virt_to_dma(ring->deq_seg,
+						     ring->dequeue);
+	),
+	TP_printk("%s %p: enq %pad(%pad) deq %pad(%pad) segs %d stream %d"
+		  " free_trbs %d bounce %d cycle %d",
+		  cdnsp_ring_type_string(__entry->type), __entry->ring,
+		  &__entry->enq, &__entry->enq_seg,
+		  &__entry->deq, &__entry->deq_seg,
+		  __entry->num_segs,
+		  __entry->stream_id,
+		  __entry->num_trbs_free,
+		  __entry->bounce_buf_len,
+		  __entry->cycle_state
+		)
+);
+
+DEFINE_EVENT(cdnsp_log_ring, cdnsp_ring_alloc,
+	TP_PROTO(struct cdnsp_ring *ring),
+	TP_ARGS(ring)
+);
+
+DEFINE_EVENT(cdnsp_log_ring, cdnsp_ring_free,
+	TP_PROTO(struct cdnsp_ring *ring),
+	TP_ARGS(ring)
+);
+
+DEFINE_EVENT(cdnsp_log_ring, cdnsp_set_stream_ring,
+	TP_PROTO(struct cdnsp_ring *ring),
+	TP_ARGS(ring)
+);
+
+DEFINE_EVENT(cdnsp_log_ring, cdnsp_ring_expansion,
+	TP_PROTO(struct cdnsp_ring *ring),
+	TP_ARGS(ring)
+);
+
+DEFINE_EVENT(cdnsp_log_ring, cdnsp_inc_enq,
+	TP_PROTO(struct cdnsp_ring *ring),
+	TP_ARGS(ring)
+);
+
+DEFINE_EVENT(cdnsp_log_ring, cdnsp_inc_deq,
+	TP_PROTO(struct cdnsp_ring *ring),
+	TP_ARGS(ring)
+);
+
+DECLARE_EVENT_CLASS(cdnsp_log_portsc,
+		TP_PROTO(u32 portnum, u32 portsc),
+		TP_ARGS(portnum, portsc),
+		TP_STRUCT__entry(
+				__field(u32, portnum)
+				__field(u32, portsc)
+				),
+		TP_fast_assign(
+				__entry->portnum = portnum;
+				__entry->portsc = portsc;
+				),
+		TP_printk("port-%d: %s",
+			  __entry->portnum,
+			  cdnsp_decode_portsc(__get_buf(CDNSP_MSG_MAX), CDNSP_MSG_MAX,
+					      __entry->portsc)
+			)
+);
+
+DEFINE_EVENT(cdnsp_log_portsc, cdnsp_handle_port_status,
+		TP_PROTO(u32 portnum, u32 portsc),
+		TP_ARGS(portnum, portsc)
+);
+
+DEFINE_EVENT(cdnsp_log_portsc, cdnsp_link_state_changed,
+		TP_PROTO(u32 portnum, u32 portsc),
+		TP_ARGS(portnum, portsc)
+);
+
+TRACE_EVENT(cdnsp_stream_number,
+	TP_PROTO(struct cdnsp_ep *pep, int num_stream_ctxs, int num_streams),
+	TP_ARGS(pep, num_stream_ctxs, num_streams),
+	TP_STRUCT__entry(
+		__string(name, pep->name)
+		__field(int, num_stream_ctxs)
+		__field(int, num_streams)
+	),
+	TP_fast_assign(
+		__entry->num_stream_ctxs = num_stream_ctxs;
+		__entry->num_streams = num_streams;
+	),
+	TP_printk("%s Need %u stream ctx entries for %u stream IDs.",
+		  __get_str(name), __entry->num_stream_ctxs,
+		  __entry->num_streams)
+);
+
+#endif /* __CDNSP_TRACE_H */
+
+/* this part must be outside header guard */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE cdnsp-trace
+
+#include <trace/define_trace.h>
diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
new file mode 100644
index 000000000..504bdf13e
--- /dev/null
+++ b/drivers/usb/cdns3/core.c
@@ -0,0 +1,564 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence USBSS and USBSSP DRD Driver.
+ *
+ * Copyright (C) 2018-2019 Cadence.
+ * Copyright (C) 2017-2018 NXP
+ * Copyright (C) 2019 Texas Instruments
+ *
+ * Author: Peter Chen <peter.chen@nxp.com>
+ *         Pawel Laszczak <pawell@cadence.com>
+ *         Roger Quadros <rogerq@ti.com>
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+
+#include "core.h"
+#include "drd.h"
+
+static int cdns_idle_init(struct cdns *cdns);
+
+static int cdns_role_start(struct cdns *cdns, enum usb_role role)
+{
+	int ret;
+
+	if (WARN_ON(role > USB_ROLE_DEVICE))
+		return 0;
+
+	mutex_lock(&cdns->mutex);
+	cdns->role = role;
+	mutex_unlock(&cdns->mutex);
+
+	if (!cdns->roles[role])
+		return -ENXIO;
+
+	if (cdns->roles[role]->state == CDNS_ROLE_STATE_ACTIVE)
+		return 0;
+
+	mutex_lock(&cdns->mutex);
+	ret = cdns->roles[role]->start(cdns);
+	if (!ret)
+		cdns->roles[role]->state = CDNS_ROLE_STATE_ACTIVE;
+	mutex_unlock(&cdns->mutex);
+
+	return ret;
+}
+
+static void cdns_role_stop(struct cdns *cdns)
+{
+	enum usb_role role = cdns->role;
+
+	if (WARN_ON(role > USB_ROLE_DEVICE))
+		return;
+
+	if (cdns->roles[role]->state == CDNS_ROLE_STATE_INACTIVE)
+		return;
+
+	mutex_lock(&cdns->mutex);
+	cdns->roles[role]->stop(cdns);
+	cdns->roles[role]->state = CDNS_ROLE_STATE_INACTIVE;
+	mutex_unlock(&cdns->mutex);
+}
+
+static void cdns_exit_roles(struct cdns *cdns)
+{
+	cdns_role_stop(cdns);
+	if (!cdns->no_drd)
+		cdns_drd_exit(cdns);
+}
+
+/**
+ * cdns_core_init_role - initialize role of operation
+ * @cdns: Pointer to cdns structure
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+int cdns_core_init_role(struct cdns *cdns)
+{
+	struct device *dev = cdns->dev;
+	enum usb_dr_mode best_dr_mode;
+	enum usb_dr_mode dr_mode;
+	int ret;
+
+	dr_mode = usb_get_dr_mode(dev);
+	cdns->role = USB_ROLE_NONE;
+
+	/*
+	 * If driver can't read mode by means of usb_get_dr_mode function then
+	 * chooses mode according with Kernel configuration. This setting
+	 * can be restricted later depending on strap pin configuration.
+	 */
+	if (dr_mode == USB_DR_MODE_UNKNOWN) {
+		if (IS_ENABLED(CONFIG_USB_CDNS3_HOST) &&
+		    IS_ENABLED(CONFIG_USB_CDNS3_GADGET))
+			dr_mode = USB_DR_MODE_OTG;
+		else if (IS_ENABLED(CONFIG_USB_CDNS3_HOST))
+			dr_mode = USB_DR_MODE_HOST;
+		else if (IS_ENABLED(CONFIG_USB_CDNS3_GADGET))
+			dr_mode = USB_DR_MODE_PERIPHERAL;
+	}
+
+	/*
+	 * At this point cdns->dr_mode contains strap configuration.
+	 * Driver try update this setting considering kernel configuration
+	 */
+	best_dr_mode = cdns->dr_mode;
+
+	ret = cdns_idle_init(cdns);
+	if (ret)
+		return ret;
+
+	if (dr_mode == USB_DR_MODE_OTG) {
+		best_dr_mode = cdns->dr_mode;
+	} else if (cdns->dr_mode == USB_DR_MODE_OTG) {
+		best_dr_mode = dr_mode;
+	} else if (cdns->dr_mode != dr_mode) {
+		dev_err(dev, "Incorrect DRD configuration\n");
+		return -EINVAL;
+	}
+
+	dr_mode = best_dr_mode;
+
+	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
+		if (cdns->host_init)
+			ret = cdns->host_init(cdns);
+		else
+			ret = -ENXIO;
+
+		if (ret) {
+			dev_err(dev, "Host initialization failed with %d\n",
+				ret);
+			goto err;
+		}
+	}
+
+	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
+		if (cdns->gadget_init)
+			ret = cdns->gadget_init(cdns);
+		else
+			ret = -ENXIO;
+
+		if (ret) {
+			dev_err(dev, "Device initialization failed with %d\n",
+				ret);
+			goto err;
+		}
+	}
+
+	cdns->dr_mode = dr_mode;
+
+	ret = cdns_drd_update_mode(cdns);
+	if (ret)
+		goto err;
+
+	/* Initialize idle role to start with */
+	ret = cdns_role_start(cdns, USB_ROLE_NONE);
+	if (ret)
+		goto err;
+
+	switch (cdns->dr_mode) {
+	case USB_DR_MODE_OTG:
+		ret = cdns_hw_role_switch(cdns);
+		if (ret)
+			goto err;
+		break;
+	case USB_DR_MODE_PERIPHERAL:
+		ret = cdns_role_start(cdns, USB_ROLE_DEVICE);
+		if (ret)
+			goto err;
+		break;
+	case USB_DR_MODE_HOST:
+		ret = cdns_role_start(cdns, USB_ROLE_HOST);
+		if (ret)
+			goto err;
+		break;
+	default:
+		ret = -EINVAL;
+		goto err;
+	}
+
+	dev_dbg(dev, "Cadence USB3 core: probe succeed\n");
+
+	return 0;
+err:
+	cdns_exit_roles(cdns);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cdns_core_init_role);
+
+/**
+ * cdns_hw_role_state_machine  - role switch state machine based on hw events.
+ * @cdns: Pointer to controller structure.
+ *
+ * Returns next role to be entered based on hw events.
+ */
+static enum usb_role cdns_hw_role_state_machine(struct cdns *cdns)
+{
+	enum usb_role role = USB_ROLE_NONE;
+	int id, vbus;
+
+	if (cdns->dr_mode != USB_DR_MODE_OTG) {
+		if (cdns_is_host(cdns))
+			role = USB_ROLE_HOST;
+		if (cdns_is_device(cdns))
+			role = USB_ROLE_DEVICE;
+
+		return role;
+	}
+
+	id = cdns_get_id(cdns);
+	vbus = cdns_get_vbus(cdns);
+
+	/*
+	 * Role change state machine
+	 * Inputs: ID, VBUS
+	 * Previous state: cdns->role
+	 * Next state: role
+	 */
+	role = cdns->role;
+
+	switch (role) {
+	case USB_ROLE_NONE:
+		/*
+		 * Driver treats USB_ROLE_NONE synonymous to IDLE state from
+		 * controller specification.
+		 */
+		if (!id)
+			role = USB_ROLE_HOST;
+		else if (vbus)
+			role = USB_ROLE_DEVICE;
+		break;
+	case USB_ROLE_HOST: /* from HOST, we can only change to NONE */
+		if (id)
+			role = USB_ROLE_NONE;
+		break;
+	case USB_ROLE_DEVICE: /* from GADGET, we can only change to NONE*/
+		if (!vbus)
+			role = USB_ROLE_NONE;
+		break;
+	}
+
+	dev_dbg(cdns->dev, "role %d -> %d\n", cdns->role, role);
+
+	return role;
+}
+
+static int cdns_idle_role_start(struct cdns *cdns)
+{
+	return 0;
+}
+
+static void cdns_idle_role_stop(struct cdns *cdns)
+{
+	/* Program Lane swap and bring PHY out of RESET */
+	phy_reset(cdns->usb3_phy);
+}
+
+static int cdns_idle_init(struct cdns *cdns)
+{
+	struct cdns_role_driver *rdrv;
+
+	rdrv = devm_kzalloc(cdns->dev, sizeof(*rdrv), GFP_KERNEL);
+	if (!rdrv)
+		return -ENOMEM;
+
+	rdrv->start = cdns_idle_role_start;
+	rdrv->stop = cdns_idle_role_stop;
+	rdrv->state = CDNS_ROLE_STATE_INACTIVE;
+	rdrv->suspend = NULL;
+	rdrv->resume = NULL;
+	rdrv->name = "idle";
+
+	cdns->roles[USB_ROLE_NONE] = rdrv;
+
+	return 0;
+}
+
+/**
+ * cdns_hw_role_switch - switch roles based on HW state
+ * @cdns: controller
+ */
+int cdns_hw_role_switch(struct cdns *cdns)
+{
+	enum usb_role real_role, current_role;
+	int ret = 0;
+
+	/* Depends on role switch class */
+	if (cdns->role_sw)
+		return 0;
+
+	pm_runtime_get_sync(cdns->dev);
+
+	current_role = cdns->role;
+	real_role = cdns_hw_role_state_machine(cdns);
+
+	/* Do nothing if nothing changed */
+	if (current_role == real_role)
+		goto exit;
+
+	cdns_role_stop(cdns);
+
+	dev_dbg(cdns->dev, "Switching role %d -> %d", current_role, real_role);
+
+	ret = cdns_role_start(cdns, real_role);
+	if (ret) {
+		/* Back to current role */
+		dev_err(cdns->dev, "set %d has failed, back to %d\n",
+			real_role, current_role);
+		ret = cdns_role_start(cdns, current_role);
+		if (ret)
+			dev_err(cdns->dev, "back to %d failed too\n",
+				current_role);
+	}
+exit:
+	pm_runtime_put_sync(cdns->dev);
+	return ret;
+}
+
+/**
+ * cdns_role_get - get current role of controller.
+ *
+ * @sw: pointer to USB role switch structure
+ *
+ * Returns role
+ */
+static enum usb_role cdns_role_get(struct usb_role_switch *sw)
+{
+	struct cdns *cdns = usb_role_switch_get_drvdata(sw);
+
+	return cdns->role;
+}
+
+/**
+ * cdns_role_set - set current role of controller.
+ *
+ * @sw: pointer to USB role switch structure
+ * @role: the previous role
+ * Handles below events:
+ * - Role switch for dual-role devices
+ * - USB_ROLE_GADGET <--> USB_ROLE_NONE for peripheral-only devices
+ */
+static int cdns_role_set(struct usb_role_switch *sw, enum usb_role role)
+{
+	struct cdns *cdns = usb_role_switch_get_drvdata(sw);
+	int ret = 0;
+
+	pm_runtime_get_sync(cdns->dev);
+
+	if (cdns->role == role)
+		goto pm_put;
+
+	if (cdns->dr_mode == USB_DR_MODE_HOST) {
+		switch (role) {
+		case USB_ROLE_NONE:
+		case USB_ROLE_HOST:
+			break;
+		default:
+			goto pm_put;
+		}
+	}
+
+	if (cdns->dr_mode == USB_DR_MODE_PERIPHERAL) {
+		switch (role) {
+		case USB_ROLE_NONE:
+		case USB_ROLE_DEVICE:
+			break;
+		default:
+			goto pm_put;
+		}
+	}
+
+	cdns_role_stop(cdns);
+	ret = cdns_role_start(cdns, role);
+	if (ret)
+		dev_err(cdns->dev, "set role %d has failed\n", role);
+
+pm_put:
+	pm_runtime_put_sync(cdns->dev);
+	return ret;
+}
+
+/**
+ * cdns_wakeup_irq - interrupt handler for wakeup events
+ * @irq: irq number for cdns3/cdnsp core device
+ * @data: structure of cdns
+ *
+ * Returns IRQ_HANDLED or IRQ_NONE
+ */
+static irqreturn_t cdns_wakeup_irq(int irq, void *data)
+{
+	struct cdns *cdns = data;
+
+	if (cdns->in_lpm) {
+		disable_irq_nosync(irq);
+		cdns->wakeup_pending = true;
+		if ((cdns->role == USB_ROLE_HOST) && cdns->host_dev)
+			pm_request_resume(&cdns->host_dev->dev);
+
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+/**
+ * cdns_init - probe for cdns3/cdnsp core device
+ * @cdns: Pointer to cdns structure.
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+int cdns_init(struct cdns *cdns)
+{
+	struct device *dev = cdns->dev;
+	int ret;
+
+	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+	if (ret) {
+		dev_err(dev, "error setting dma mask: %d\n", ret);
+		return ret;
+	}
+
+	mutex_init(&cdns->mutex);
+
+	if (device_property_read_bool(dev, "usb-role-switch")) {
+		struct usb_role_switch_desc sw_desc = { };
+
+		sw_desc.set = cdns_role_set;
+		sw_desc.get = cdns_role_get;
+		sw_desc.allow_userspace_control = true;
+		sw_desc.driver_data = cdns;
+		sw_desc.fwnode = dev->fwnode;
+
+		cdns->role_sw = usb_role_switch_register(dev, &sw_desc);
+		if (IS_ERR(cdns->role_sw)) {
+			dev_warn(dev, "Unable to register Role Switch\n");
+			return PTR_ERR(cdns->role_sw);
+		}
+	}
+
+	if (cdns->wakeup_irq) {
+		ret = devm_request_irq(cdns->dev, cdns->wakeup_irq,
+						cdns_wakeup_irq,
+						IRQF_SHARED,
+						dev_name(cdns->dev), cdns);
+
+		if (ret) {
+			dev_err(cdns->dev, "couldn't register wakeup irq handler\n");
+			goto role_switch_unregister;
+		}
+	}
+
+	ret = cdns_drd_init(cdns);
+	if (ret)
+		goto init_failed;
+
+	spin_lock_init(&cdns->lock);
+
+	return 0;
+init_failed:
+	cdns_drd_exit(cdns);
+role_switch_unregister:
+	if (cdns->role_sw)
+		usb_role_switch_unregister(cdns->role_sw);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cdns_init);
+
+/**
+ * cdns_remove - unbind drd driver and clean up
+ * @cdns: Pointer to cdns structure.
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+int cdns_remove(struct cdns *cdns)
+{
+	cdns_exit_roles(cdns);
+	usb_role_switch_unregister(cdns->role_sw);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cdns_remove);
+
+#ifdef CONFIG_PM_SLEEP
+int cdns_suspend(struct cdns *cdns)
+{
+	struct device *dev = cdns->dev;
+	unsigned long flags;
+
+	if (pm_runtime_status_suspended(dev))
+		pm_runtime_resume(dev);
+
+	if (cdns->roles[cdns->role]->suspend) {
+		spin_lock_irqsave(&cdns->lock, flags);
+		cdns->roles[cdns->role]->suspend(cdns, false);
+		spin_unlock_irqrestore(&cdns->lock, flags);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cdns_suspend);
+
+int cdns_resume(struct cdns *cdns)
+{
+	bool power_lost = cdns_power_is_lost(cdns);
+	enum usb_role real_role;
+	bool role_changed = false;
+	int ret = 0;
+
+	if (power_lost) {
+		if (!cdns->role_sw) {
+			real_role = cdns_hw_role_state_machine(cdns);
+			if (real_role != cdns->role) {
+				ret = cdns_hw_role_switch(cdns);
+				if (ret)
+					return ret;
+				role_changed = true;
+			}
+		}
+
+		if (!role_changed) {
+			if (cdns->role == USB_ROLE_HOST)
+				ret = cdns_drd_host_on(cdns);
+			else if (cdns->role == USB_ROLE_DEVICE)
+				ret = cdns_drd_gadget_on(cdns);
+
+			if (ret)
+				return ret;
+		}
+	}
+
+	if (!role_changed && cdns->roles[cdns->role]->resume)
+		cdns->roles[cdns->role]->resume(cdns, power_lost);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cdns_resume);
+
+void cdns_set_active(struct cdns *cdns, u8 set_active)
+{
+	struct device *dev = cdns->dev;
+
+	if (set_active) {
+		pm_runtime_disable(dev);
+		pm_runtime_set_active(dev);
+		pm_runtime_enable(dev);
+	}
+
+	return;
+}
+EXPORT_SYMBOL_GPL(cdns_set_active);
+#endif /* CONFIG_PM_SLEEP */
+
+MODULE_AUTHOR("Peter Chen <peter.chen@nxp.com>");
+MODULE_AUTHOR("Pawel Laszczak <pawell@cadence.com>");
+MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
+MODULE_DESCRIPTION("Cadence USBSS/USBSSP DRD driver (core, DRD, platform, optional host/gadget)");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/cdns3/core.h b/drivers/usb/cdns3/core.h
new file mode 100644
index 000000000..8c492fda9
--- /dev/null
+++ b/drivers/usb/cdns3/core.h
@@ -0,0 +1,149 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Cadence USBSS and USBSSP DRD Header File.
+ *
+ * Copyright (C) 2017-2018 NXP
+ * Copyright (C) 2018-2019 Cadence.
+ *
+ * Authors: Peter Chen <peter.chen@nxp.com>
+ *          Pawel Laszczak <pawell@cadence.com>
+ */
+#ifndef __LINUX_CDNS3_CORE_H
+#define __LINUX_CDNS3_CORE_H
+
+#include <linux/usb/otg.h>
+#include <linux/usb/role.h>
+
+struct cdns;
+
+/**
+ * struct cdns_role_driver - host/gadget role driver
+ * @start: start this role
+ * @stop: stop this role
+ * @suspend: suspend callback for this role
+ * @resume: resume callback for this role
+ * @irq: irq handler for this role
+ * @name: role name string (host/gadget)
+ * @state: current state
+ */
+struct cdns_role_driver {
+	int (*start)(struct cdns *cdns);
+	void (*stop)(struct cdns *cdns);
+	int (*suspend)(struct cdns *cdns, bool do_wakeup);
+	int (*resume)(struct cdns *cdns, bool lost_power);
+	const char *name;
+#define CDNS_ROLE_STATE_INACTIVE	0
+#define CDNS_ROLE_STATE_ACTIVE		1
+	int state;
+};
+
+#define CDNS_XHCI_RESOURCES_NUM	2
+
+struct cdns3_platform_data {
+	int (*platform_suspend)(struct device *dev,
+			bool suspend, bool wakeup);
+	unsigned long quirks;
+#define CDNS3_DEFAULT_PM_RUNTIME_ALLOW	BIT(0)
+#define CDNS3_DRD_SUSPEND_RESIDENCY_ENABLE	BIT(1)
+	u32 override_apb_timeout;	/* 0 = use default (e.g. for PCI) */
+};
+
+/**
+ * struct cdns - Representation of Cadence USB3 DRD controller.
+ * @dev: pointer to Cadence device struct
+ * @xhci_regs: pointer to base of xhci registers
+ * @xhci_res: the resource for xhci
+ * @dev_regs: pointer to base of dev registers
+ * @otg_res: the resource for otg
+ * @otg_v0_regs: pointer to base of v0 otg registers
+ * @otg_v1_regs: pointer to base of v1 otg registers
+ * @otg_cdnsp_regs: pointer to base of CDNSP otg registers
+ * @otg_regs: pointer to base of otg registers
+ * @otg_irq_regs: pointer to interrupt registers
+ * @otg_irq: irq number for otg controller
+ * @dev_irq: irq number for device controller
+ * @wakeup_irq: irq number for wakeup event, it is optional
+ * @roles: array of supported roles for this controller
+ * @role: current role
+ * @host_dev: the child host device pointer for cdns core
+ * @gadget_dev: the child gadget device pointer
+ * @usb2_phy: pointer to USB2 PHY
+ * @usb3_phy: pointer to USB3 PHY
+ * @mutex: the mutex for concurrent code at driver
+ * @dr_mode: supported mode of operation it can be only Host, only Device
+ *           or OTG mode that allow to switch between Device and Host mode.
+ *           This field based on firmware setting, kernel configuration
+ *           and hardware configuration.
+ * @role_sw: pointer to role switch object.
+ * @in_lpm: indicate the controller is in low power mode
+ * @wakeup_pending: wakeup interrupt pending
+ * @pdata: platform data from glue layer
+ * @lock: spinlock structure
+ * @xhci_plat_data: xhci private data structure pointer
+ * @override_apb_timeout: hold value of APB timeout. For value 0 the default
+ *                        value in CHICKEN_BITS_3 will be preserved.
+ * @gadget_init: pointer to gadget initialization function
+ * @host_init: pointer to host initialization function
+ * @no_drd: DRD register block is inaccessible. The controller is hardwired to
+ *          single role (host or device) or the logic for role switching is
+ *          missing.
+ */
+struct cdns {
+	struct device			*dev;
+	void __iomem			*xhci_regs;
+	struct resource			xhci_res[CDNS_XHCI_RESOURCES_NUM];
+	struct cdns3_usb_regs __iomem	*dev_regs;
+
+	struct resource				otg_res;
+	struct cdns3_otg_legacy_regs __iomem	*otg_v0_regs;
+	struct cdns3_otg_regs __iomem		*otg_v1_regs;
+	struct cdnsp_otg_regs __iomem		*otg_cdnsp_regs;
+	struct cdns_otg_common_regs __iomem	*otg_regs;
+	struct cdns_otg_irq_regs __iomem	*otg_irq_regs;
+#define CDNS3_CONTROLLER_V0	0
+#define CDNS3_CONTROLLER_V1	1
+#define CDNSP_CONTROLLER_V2	2
+	u32				version;
+	bool				phyrst_a_enable;
+
+	int				otg_irq;
+	int				dev_irq;
+	int				wakeup_irq;
+	struct cdns_role_driver	*roles[USB_ROLE_DEVICE + 1];
+	enum usb_role			role;
+	struct platform_device		*host_dev;
+	void				*gadget_dev;
+	struct phy			*usb2_phy;
+	struct phy			*usb3_phy;
+	/* mutext used in workqueue*/
+	struct mutex			mutex;
+	enum usb_dr_mode		dr_mode;
+	struct usb_role_switch		*role_sw;
+	bool				in_lpm;
+	bool				wakeup_pending;
+	struct cdns3_platform_data	*pdata;
+	spinlock_t			lock;
+	struct xhci_plat_priv		*xhci_plat_data;
+	u32                             override_apb_timeout;
+	int (*gadget_init)(struct cdns *cdns);
+	int (*host_init)(struct cdns *cdns);
+	bool				no_drd;
+};
+
+int cdns_hw_role_switch(struct cdns *cdns);
+int cdns_init(struct cdns *cdns);
+int cdns_remove(struct cdns *cdns);
+int cdns_core_init_role(struct cdns *cdns);
+
+#ifdef CONFIG_PM_SLEEP
+int cdns_resume(struct cdns *cdns);
+int cdns_suspend(struct cdns *cdns);
+void cdns_set_active(struct cdns *cdns, u8 set_active);
+#else /* CONFIG_PM_SLEEP */
+static inline int cdns_resume(struct cdns *cdns)
+{ return 0; }
+static inline void cdns_set_active(struct cdns *cdns, u8 set_active) { }
+static inline int cdns_suspend(struct cdns *cdns)
+{ return 0; }
+#endif /* CONFIG_PM_SLEEP */
+#endif /* __LINUX_CDNS3_CORE_H */
diff --git a/drivers/usb/cdns3/drd.c b/drivers/usb/cdns3/drd.c
new file mode 100644
index 000000000..d2bb682e4
--- /dev/null
+++ b/drivers/usb/cdns3/drd.c
@@ -0,0 +1,551 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence USBSS and USBSSP DRD Driver.
+ *
+ * Copyright (C) 2018-2020 Cadence.
+ * Copyright (C) 2019 Texas Instruments
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ *         Roger Quadros <rogerq@ti.com>
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/usb/otg.h>
+
+#include "drd.h"
+#include "core.h"
+
+/**
+ * cdns_set_mode - change mode of OTG Core
+ * @cdns: pointer to context structure
+ * @mode: selected mode from cdns_role
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+static int cdns_set_mode(struct cdns *cdns, enum usb_dr_mode mode)
+{
+	void __iomem  *override_reg;
+	u32 reg;
+
+	switch (mode) {
+	case USB_DR_MODE_PERIPHERAL:
+		break;
+	case USB_DR_MODE_HOST:
+		break;
+	case USB_DR_MODE_OTG:
+		dev_dbg(cdns->dev, "Set controller to OTG mode\n");
+
+		if (cdns->version == CDNSP_CONTROLLER_V2)
+			override_reg = &cdns->otg_cdnsp_regs->override;
+		else if (cdns->version == CDNS3_CONTROLLER_V1)
+			override_reg = &cdns->otg_v1_regs->override;
+		else
+			override_reg = &cdns->otg_v0_regs->ctrl1;
+
+		reg = readl(override_reg);
+
+		if (cdns->version != CDNS3_CONTROLLER_V0)
+			reg |= OVERRIDE_IDPULLUP;
+		else
+			reg |= OVERRIDE_IDPULLUP_V0;
+
+		writel(reg, override_reg);
+
+		if (cdns->version == CDNS3_CONTROLLER_V1) {
+			/*
+			 * Enable work around feature built into the
+			 * controller to address issue with RX Sensitivity
+			 * est (EL_17) for USB2 PHY. The issue only occures
+			 * for 0x0002450D controller version.
+			 */
+			if (cdns->phyrst_a_enable) {
+				reg = readl(&cdns->otg_v1_regs->phyrst_cfg);
+				reg |= PHYRST_CFG_PHYRST_A_ENABLE;
+				writel(reg, &cdns->otg_v1_regs->phyrst_cfg);
+			}
+		}
+
+		/*
+		 * Hardware specification says: "ID_VALUE must be valid within
+		 * 50ms after idpullup is set to '1" so driver must wait
+		 * 50ms before reading this pin.
+		 */
+		usleep_range(50000, 60000);
+		break;
+	default:
+		dev_err(cdns->dev, "Unsupported mode of operation %d\n", mode);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int cdns_get_id(struct cdns *cdns)
+{
+	int id;
+
+	if (cdns->no_drd)
+		return 0;
+
+	id = readl(&cdns->otg_regs->sts) & OTGSTS_ID_VALUE;
+	dev_dbg(cdns->dev, "OTG ID: %d", id);
+
+	return id;
+}
+
+int cdns_get_vbus(struct cdns *cdns)
+{
+	int vbus;
+
+	vbus = !!(readl(&cdns->otg_regs->sts) & OTGSTS_VBUS_VALID);
+	dev_dbg(cdns->dev, "OTG VBUS: %d", vbus);
+
+	return vbus;
+}
+
+void cdns_clear_vbus(struct cdns *cdns)
+{
+	u32 reg;
+
+	if (cdns->version != CDNSP_CONTROLLER_V2 || cdns->no_drd)
+		return;
+
+	reg = readl(&cdns->otg_cdnsp_regs->override);
+	reg |= OVERRIDE_SESS_VLD_SEL;
+	writel(reg, &cdns->otg_cdnsp_regs->override);
+}
+EXPORT_SYMBOL_GPL(cdns_clear_vbus);
+
+void cdns_set_vbus(struct cdns *cdns)
+{
+	u32 reg;
+
+	if (cdns->version != CDNSP_CONTROLLER_V2 || cdns->no_drd)
+		return;
+
+	reg = readl(&cdns->otg_cdnsp_regs->override);
+	reg &= ~OVERRIDE_SESS_VLD_SEL;
+	writel(reg, &cdns->otg_cdnsp_regs->override);
+}
+EXPORT_SYMBOL_GPL(cdns_set_vbus);
+
+bool cdns_is_host(struct cdns *cdns)
+{
+	if (cdns->dr_mode == USB_DR_MODE_HOST)
+		return true;
+	else if (cdns_get_id(cdns) == CDNS3_ID_HOST)
+		return true;
+
+	return false;
+}
+
+bool cdns_is_device(struct cdns *cdns)
+{
+	if (cdns->dr_mode == USB_DR_MODE_PERIPHERAL)
+		return true;
+	else if (cdns->dr_mode == USB_DR_MODE_OTG)
+		if (cdns_get_id(cdns) == CDNS3_ID_PERIPHERAL)
+			return true;
+
+	return false;
+}
+
+/**
+ * cdns_otg_disable_irq - Disable all OTG interrupts
+ * @cdns: Pointer to controller context structure
+ */
+static void cdns_otg_disable_irq(struct cdns *cdns)
+{
+	if (cdns->version)
+		writel(0, &cdns->otg_irq_regs->ien);
+}
+
+/**
+ * cdns_otg_enable_irq - enable id and sess_valid interrupts
+ * @cdns: Pointer to controller context structure
+ */
+static void cdns_otg_enable_irq(struct cdns *cdns)
+{
+	writel(OTGIEN_ID_CHANGE_INT | OTGIEN_VBUSVALID_RISE_INT |
+	       OTGIEN_VBUSVALID_FALL_INT, &cdns->otg_irq_regs->ien);
+}
+
+/**
+ * cdns_drd_host_on - start host.
+ * @cdns: Pointer to controller context structure.
+ *
+ * Returns 0 on success otherwise negative errno.
+ */
+int cdns_drd_host_on(struct cdns *cdns)
+{
+	u32 val, ready_bit;
+	int ret = 0;
+
+	if (cdns->no_drd)
+		goto phy_set;
+
+	/* Enable host mode. */
+	writel(OTGCMD_HOST_BUS_REQ | OTGCMD_OTG_DIS,
+	       &cdns->otg_regs->cmd);
+
+	if (cdns->version == CDNSP_CONTROLLER_V2)
+		ready_bit = OTGSTS_CDNSP_XHCI_READY;
+	else
+		ready_bit = OTGSTS_CDNS3_XHCI_READY;
+
+	dev_dbg(cdns->dev, "Waiting till Host mode is turned on\n");
+	ret = readl_poll_timeout_atomic(&cdns->otg_regs->sts, val,
+					val & ready_bit, 1, 100000);
+
+	if (ret)
+		dev_err(cdns->dev, "timeout waiting for xhci_ready\n");
+
+phy_set:
+	phy_set_mode(cdns->usb2_phy, PHY_MODE_USB_HOST);
+	phy_set_mode(cdns->usb3_phy, PHY_MODE_USB_HOST);
+	return ret;
+}
+
+/**
+ * cdns_drd_host_off - stop host.
+ * @cdns: Pointer to controller context structure.
+ */
+void cdns_drd_host_off(struct cdns *cdns)
+{
+	u32 val;
+
+	if (cdns->no_drd)
+		goto phy_set;
+
+	writel(OTGCMD_HOST_BUS_DROP | OTGCMD_DEV_BUS_DROP |
+	       OTGCMD_DEV_POWER_OFF | OTGCMD_HOST_POWER_OFF,
+	       &cdns->otg_regs->cmd);
+
+	/* Waiting till H_IDLE state.*/
+	readl_poll_timeout_atomic(&cdns->otg_regs->state, val,
+				  !(val & OTGSTATE_HOST_STATE_MASK),
+				  1, 2000000);
+
+phy_set:
+	phy_set_mode(cdns->usb2_phy, PHY_MODE_INVALID);
+	phy_set_mode(cdns->usb3_phy, PHY_MODE_INVALID);
+}
+
+/**
+ * cdns_drd_gadget_on - start gadget.
+ * @cdns: Pointer to controller context structure.
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+int cdns_drd_gadget_on(struct cdns *cdns)
+{
+	u32 reg = OTGCMD_OTG_DIS;
+	u32 ready_bit;
+	int ret, val;
+
+	if (cdns->no_drd)
+		goto phy_set;
+
+	/* switch OTG core */
+	writel(OTGCMD_DEV_BUS_REQ | reg, &cdns->otg_regs->cmd);
+
+	dev_dbg(cdns->dev, "Waiting till Device mode is turned on\n");
+
+	if (cdns->version == CDNSP_CONTROLLER_V2)
+		ready_bit = OTGSTS_CDNSP_DEV_READY;
+	else
+		ready_bit = OTGSTS_CDNS3_DEV_READY;
+
+	ret = readl_poll_timeout_atomic(&cdns->otg_regs->sts, val,
+					val & ready_bit, 1, 100000);
+	if (ret) {
+		dev_err(cdns->dev, "timeout waiting for dev_ready\n");
+		return ret;
+	}
+
+phy_set:
+	phy_set_mode(cdns->usb2_phy, PHY_MODE_USB_DEVICE);
+	phy_set_mode(cdns->usb3_phy, PHY_MODE_USB_DEVICE);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cdns_drd_gadget_on);
+
+/**
+ * cdns_drd_gadget_off - stop gadget.
+ * @cdns: Pointer to controller context structure.
+ */
+void cdns_drd_gadget_off(struct cdns *cdns)
+{
+	u32 val;
+
+	if (cdns->no_drd)
+		goto phy_set;
+
+	/*
+	 * Driver should wait at least 10us after disabling Device
+	 * before turning-off Device (DEV_BUS_DROP).
+	 */
+	usleep_range(20, 30);
+	writel(OTGCMD_HOST_BUS_DROP | OTGCMD_DEV_BUS_DROP |
+	       OTGCMD_DEV_POWER_OFF | OTGCMD_HOST_POWER_OFF,
+	       &cdns->otg_regs->cmd);
+	/* Waiting till DEV_IDLE state.*/
+	readl_poll_timeout_atomic(&cdns->otg_regs->state, val,
+				  !(val & OTGSTATE_DEV_STATE_MASK),
+				  1, 2000000);
+
+phy_set:
+	phy_set_mode(cdns->usb2_phy, PHY_MODE_INVALID);
+	phy_set_mode(cdns->usb3_phy, PHY_MODE_INVALID);
+}
+EXPORT_SYMBOL_GPL(cdns_drd_gadget_off);
+
+/**
+ * cdns_init_otg_mode - initialize drd controller
+ * @cdns: Pointer to controller context structure
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+static int cdns_init_otg_mode(struct cdns *cdns)
+{
+	int ret;
+
+	cdns_otg_disable_irq(cdns);
+	/* clear all interrupts */
+	writel(~0, &cdns->otg_irq_regs->ivect);
+
+	ret = cdns_set_mode(cdns, USB_DR_MODE_OTG);
+	if (ret)
+		return ret;
+
+	cdns_otg_enable_irq(cdns);
+
+	return 0;
+}
+
+/**
+ * cdns_drd_update_mode - initialize mode of operation
+ * @cdns: Pointer to controller context structure
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+int cdns_drd_update_mode(struct cdns *cdns)
+{
+	int ret;
+
+	switch (cdns->dr_mode) {
+	case USB_DR_MODE_PERIPHERAL:
+		ret = cdns_set_mode(cdns, USB_DR_MODE_PERIPHERAL);
+		break;
+	case USB_DR_MODE_HOST:
+		ret = cdns_set_mode(cdns, USB_DR_MODE_HOST);
+		break;
+	case USB_DR_MODE_OTG:
+		ret = cdns_init_otg_mode(cdns);
+		break;
+	default:
+		dev_err(cdns->dev, "Unsupported mode of operation %d\n",
+			cdns->dr_mode);
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static irqreturn_t cdns_drd_thread_irq(int irq, void *data)
+{
+	struct cdns *cdns = data;
+
+	cdns_hw_role_switch(cdns);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * cdns_drd_irq - interrupt handler for OTG events
+ *
+ * @irq: irq number for cdns core device
+ * @data: structure of cdns
+ *
+ * Returns IRQ_HANDLED or IRQ_NONE
+ */
+static irqreturn_t cdns_drd_irq(int irq, void *data)
+{
+	irqreturn_t ret = IRQ_NONE;
+	struct cdns *cdns = data;
+	u32 reg;
+
+	if (cdns->dr_mode != USB_DR_MODE_OTG)
+		return IRQ_NONE;
+
+	if (cdns->in_lpm)
+		return ret;
+
+	reg = readl(&cdns->otg_irq_regs->ivect);
+
+	if (!reg)
+		return IRQ_NONE;
+
+	if (reg & OTGIEN_ID_CHANGE_INT) {
+		dev_dbg(cdns->dev, "OTG IRQ: new ID: %d\n",
+			cdns_get_id(cdns));
+
+		ret = IRQ_WAKE_THREAD;
+	}
+
+	if (reg & (OTGIEN_VBUSVALID_RISE_INT | OTGIEN_VBUSVALID_FALL_INT)) {
+		dev_dbg(cdns->dev, "OTG IRQ: new VBUS: %d\n",
+			cdns_get_vbus(cdns));
+
+		ret = IRQ_WAKE_THREAD;
+	}
+
+	writel(~0, &cdns->otg_irq_regs->ivect);
+	return ret;
+}
+
+int cdns_drd_init(struct cdns *cdns)
+{
+	void __iomem *regs;
+	u32 state, reg;
+	int ret;
+
+	if (cdns->no_drd) {
+		cdns->dr_mode = usb_get_dr_mode(cdns->dev);
+
+		if (cdns->dr_mode != USB_DR_MODE_HOST &&
+		    cdns->dr_mode != USB_DR_MODE_PERIPHERAL) {
+			dev_err(cdns->dev, "Incorrect dr_mode\n");
+			return -EINVAL;
+		}
+
+		return 0;
+	}
+
+	regs = devm_ioremap_resource(cdns->dev, &cdns->otg_res);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	/* Detection of DRD version. Controller has been released
+	 * in three versions. All are very similar and are software compatible,
+	 * but they have same changes in register maps.
+	 * The first register in oldest version is command register and it's
+	 * read only. Driver should read 0 from it. On the other hand, in v1
+	 * and v2 the first register contains device ID number which is not
+	 * set to 0. Driver uses this fact to detect the proper version of
+	 * controller.
+	 */
+	cdns->otg_v0_regs = regs;
+	if (!readl(&cdns->otg_v0_regs->cmd)) {
+		cdns->version  = CDNS3_CONTROLLER_V0;
+		cdns->otg_v1_regs = NULL;
+		cdns->otg_cdnsp_regs = NULL;
+		cdns->otg_regs = regs;
+		cdns->otg_irq_regs = (struct cdns_otg_irq_regs __iomem  *)
+				     &cdns->otg_v0_regs->ien;
+		writel(1, &cdns->otg_v0_regs->simulate);
+		dev_dbg(cdns->dev, "DRD version v0 (%08x)\n",
+			 readl(&cdns->otg_v0_regs->version));
+	} else {
+		cdns->otg_v0_regs = NULL;
+		cdns->otg_v1_regs = regs;
+		cdns->otg_cdnsp_regs = regs;
+
+		cdns->otg_regs = (void __iomem *)&cdns->otg_v1_regs->cmd;
+
+		state = readl(&cdns->otg_cdnsp_regs->did);
+
+		if (OTG_CDNSP_CHECK_DID(state)) {
+			cdns->otg_irq_regs = (struct cdns_otg_irq_regs __iomem *)
+					      &cdns->otg_cdnsp_regs->ien;
+			cdns->version  = CDNSP_CONTROLLER_V2;
+		} else if (OTG_CDNS3_CHECK_DID(state)) {
+			cdns->otg_irq_regs = (struct cdns_otg_irq_regs __iomem *)
+					      &cdns->otg_v1_regs->ien;
+			writel(1, &cdns->otg_v1_regs->simulate);
+
+			if (cdns->pdata &&
+			    (cdns->pdata->quirks & CDNS3_DRD_SUSPEND_RESIDENCY_ENABLE)) {
+				reg = readl(&cdns->otg_v1_regs->susp_ctrl);
+				reg |= SUSP_CTRL_SUSPEND_RESIDENCY_ENABLE;
+				writel(reg, &cdns->otg_v1_regs->susp_ctrl);
+			}
+
+			cdns->version  = CDNS3_CONTROLLER_V1;
+		} else {
+			dev_err(cdns->dev, "not supported DID=0x%08x\n", state);
+			return -EINVAL;
+		}
+
+		dev_dbg(cdns->dev, "DRD version v1 (ID: %08x, rev: %08x)\n",
+			 readl(&cdns->otg_v1_regs->did),
+			 readl(&cdns->otg_v1_regs->rid));
+	}
+
+	state = OTGSTS_STRAP(readl(&cdns->otg_regs->sts));
+
+	/* Update dr_mode according to STRAP configuration. */
+	cdns->dr_mode = USB_DR_MODE_OTG;
+
+	if ((cdns->version == CDNSP_CONTROLLER_V2 &&
+	     state == OTGSTS_CDNSP_STRAP_HOST) ||
+	    (cdns->version != CDNSP_CONTROLLER_V2 &&
+	     state == OTGSTS_STRAP_HOST)) {
+		dev_dbg(cdns->dev, "Controller strapped to HOST\n");
+		cdns->dr_mode = USB_DR_MODE_HOST;
+	} else if ((cdns->version == CDNSP_CONTROLLER_V2 &&
+		    state == OTGSTS_CDNSP_STRAP_GADGET) ||
+		   (cdns->version != CDNSP_CONTROLLER_V2 &&
+		    state == OTGSTS_STRAP_GADGET)) {
+		dev_dbg(cdns->dev, "Controller strapped to PERIPHERAL\n");
+		cdns->dr_mode = USB_DR_MODE_PERIPHERAL;
+	}
+
+	ret = devm_request_threaded_irq(cdns->dev, cdns->otg_irq,
+					cdns_drd_irq,
+					cdns_drd_thread_irq,
+					IRQF_SHARED,
+					dev_name(cdns->dev), cdns);
+	if (ret) {
+		dev_err(cdns->dev, "couldn't get otg_irq\n");
+		return ret;
+	}
+
+	state = readl(&cdns->otg_regs->sts);
+	if (OTGSTS_OTG_NRDY(state)) {
+		dev_err(cdns->dev, "Cadence USB3 OTG device not ready\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+int cdns_drd_exit(struct cdns *cdns)
+{
+	if (cdns->no_drd)
+		return 0;
+
+	cdns_otg_disable_irq(cdns);
+
+	return 0;
+}
+
+/* Indicate the cdns3 core was power lost before */
+bool cdns_power_is_lost(struct cdns *cdns)
+{
+	if (cdns->no_drd)
+		return false;
+
+	if (cdns->version == CDNS3_CONTROLLER_V0) {
+		if (!(readl(&cdns->otg_v0_regs->simulate) & BIT(0)))
+			return true;
+	} else {
+		if (!(readl(&cdns->otg_v1_regs->simulate) & BIT(0)))
+			return true;
+	}
+	return false;
+}
+EXPORT_SYMBOL_GPL(cdns_power_is_lost);
diff --git a/drivers/usb/cdns3/drd.h b/drivers/usb/cdns3/drd.h
new file mode 100644
index 000000000..1e2aee14d
--- /dev/null
+++ b/drivers/usb/cdns3/drd.h
@@ -0,0 +1,226 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Cadence USB3 and USBSSP DRD header file.
+ *
+ * Copyright (C) 2018-2020 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ */
+#ifndef __LINUX_CDNS3_DRD
+#define __LINUX_CDNS3_DRD
+
+#include <linux/usb/otg.h>
+#include "core.h"
+
+/*  DRD register interface for version v1 of cdns3 driver. */
+struct cdns3_otg_regs {
+	__le32 did;
+	__le32 rid;
+	__le32 capabilities;
+	__le32 reserved1;
+	__le32 cmd;
+	__le32 sts;
+	__le32 state;
+	__le32 reserved2;
+	__le32 ien;
+	__le32 ivect;
+	__le32 refclk;
+	__le32 tmr;
+	__le32 reserved3[4];
+	__le32 simulate;
+	__le32 override;
+	__le32 susp_ctrl;
+	__le32 phyrst_cfg;
+	__le32 anasts;
+	__le32 adp_ramp_time;
+	__le32 ctrl1;
+	__le32 ctrl2;
+};
+
+/*  DRD register interface for version v0 of cdns3 driver. */
+struct cdns3_otg_legacy_regs {
+	__le32 cmd;
+	__le32 sts;
+	__le32 state;
+	__le32 refclk;
+	__le32 ien;
+	__le32 ivect;
+	__le32 reserved1[3];
+	__le32 tmr;
+	__le32 reserved2[2];
+	__le32 version;
+	__le32 capabilities;
+	__le32 reserved3[2];
+	__le32 simulate;
+	__le32 reserved4[5];
+	__le32 ctrl1;
+};
+
+/* DRD register interface for cdnsp driver */
+struct cdnsp_otg_regs {
+	__le32 did;
+	__le32 rid;
+	__le32 cfgs1;
+	__le32 cfgs2;
+	__le32 cmd;
+	__le32 sts;
+	__le32 state;
+	__le32 ien;
+	__le32 ivect;
+	__le32 tmr;
+	__le32 simulate;
+	__le32 adpbc_sts;
+	__le32 adp_ramp_time;
+	__le32 adpbc_ctrl1;
+	__le32 adpbc_ctrl2;
+	__le32 override;
+	__le32 vbusvalid_dbnc_cfg;
+	__le32 sessvalid_dbnc_cfg;
+	__le32 susp_timing_ctrl;
+};
+
+/* CDNSP driver supports 0x000403xx Cadence USB controller family. */
+#define OTG_CDNSP_CHECK_DID(did) (((did) & GENMASK(31, 8)) == 0x00040300)
+
+/* CDNS3 driver supports 0x000402xx Cadence USB controller family. */
+#define OTG_CDNS3_CHECK_DID(did) (((did) & GENMASK(31, 8)) == 0x00040200)
+
+/*
+ * Common registers interface for both CDNS3 and CDNSP version of DRD.
+ */
+struct cdns_otg_common_regs {
+	__le32 cmd;
+	__le32 sts;
+	__le32 state;
+};
+
+/*
+ * Interrupt related registers. This registers are mapped in different
+ * location for CDNSP controller.
+ */
+struct cdns_otg_irq_regs {
+	__le32 ien;
+	__le32 ivect;
+};
+
+/* CDNS_RID - bitmasks */
+#define CDNS_RID(p)			((p) & GENMASK(15, 0))
+
+/* CDNS_VID - bitmasks */
+#define CDNS_DID(p)			((p) & GENMASK(31, 0))
+
+/* OTGCMD - bitmasks */
+/* "Request the bus for Device mode. */
+#define OTGCMD_DEV_BUS_REQ		BIT(0)
+/* Request the bus for Host mode */
+#define OTGCMD_HOST_BUS_REQ		BIT(1)
+/* Enable OTG mode. */
+#define OTGCMD_OTG_EN			BIT(2)
+/* Disable OTG mode */
+#define OTGCMD_OTG_DIS			BIT(3)
+/*"Configure OTG as A-Device. */
+#define OTGCMD_A_DEV_EN			BIT(4)
+/*"Configure OTG as A-Device. */
+#define OTGCMD_A_DEV_DIS		BIT(5)
+/* Drop the bus for Device mod	e. */
+#define OTGCMD_DEV_BUS_DROP		BIT(8)
+/* Drop the bus for Host mode*/
+#define OTGCMD_HOST_BUS_DROP		BIT(9)
+/* Power Down USBSS-DEV - only for CDNS3.*/
+#define OTGCMD_DEV_POWER_OFF		BIT(11)
+/* Power Down CDNSXHCI - only for CDNS3. */
+#define OTGCMD_HOST_POWER_OFF		BIT(12)
+
+/* OTGIEN - bitmasks */
+/* ID change interrupt enable */
+#define OTGIEN_ID_CHANGE_INT		BIT(0)
+/* Vbusvalid fall detected interrupt enable.*/
+#define OTGIEN_VBUSVALID_RISE_INT	BIT(4)
+/* Vbusvalid fall detected interrupt enable */
+#define OTGIEN_VBUSVALID_FALL_INT	BIT(5)
+
+/* OTGSTS - bitmasks */
+/*
+ * Current value of the ID pin. It is only valid when idpullup in
+ *  OTGCTRL1_TYPE register is set to '1'.
+ */
+#define OTGSTS_ID_VALUE			BIT(0)
+/* Current value of the vbus_valid */
+#define OTGSTS_VBUS_VALID		BIT(1)
+/* Current value of the b_sess_vld */
+#define OTGSTS_SESSION_VALID		BIT(2)
+/*Device mode is active*/
+#define OTGSTS_DEV_ACTIVE		BIT(3)
+/* Host mode is active. */
+#define OTGSTS_HOST_ACTIVE		BIT(4)
+/* OTG Controller not ready. */
+#define OTGSTS_OTG_NRDY_MASK		BIT(11)
+#define OTGSTS_OTG_NRDY(p)		((p) & OTGSTS_OTG_NRDY_MASK)
+/*
+ * Value of the strap pins for:
+ * CDNS3:
+ * 000 - no default configuration
+ * 010 - Controller initiall configured as Host
+ * 100 - Controller initially configured as Device
+ * CDNSP:
+ * 000 - No default configuration.
+ * 010 - Controller initiall configured as Host.
+ * 100 - Controller initially configured as Device.
+ */
+#define OTGSTS_STRAP(p)			(((p) & GENMASK(14, 12)) >> 12)
+#define OTGSTS_STRAP_NO_DEFAULT_CFG	0x00
+#define OTGSTS_STRAP_HOST_OTG		0x01
+#define OTGSTS_STRAP_HOST		0x02
+#define OTGSTS_STRAP_GADGET		0x04
+#define OTGSTS_CDNSP_STRAP_HOST		0x01
+#define OTGSTS_CDNSP_STRAP_GADGET	0x02
+
+/* Host mode is turned on. */
+#define OTGSTS_CDNS3_XHCI_READY		BIT(26)
+#define OTGSTS_CDNSP_XHCI_READY		BIT(27)
+
+/* "Device mode is turned on .*/
+#define OTGSTS_CDNS3_DEV_READY		BIT(27)
+#define OTGSTS_CDNSP_DEV_READY		BIT(26)
+
+/* OTGSTATE- bitmasks */
+#define OTGSTATE_DEV_STATE_MASK		GENMASK(2, 0)
+#define OTGSTATE_HOST_STATE_MASK	GENMASK(5, 3)
+#define OTGSTATE_HOST_STATE_IDLE	0x0
+#define OTGSTATE_HOST_STATE_VBUS_FALL	0x7
+#define OTGSTATE_HOST_STATE(p)		(((p) & OTGSTATE_HOST_STATE_MASK) >> 3)
+
+/* OTGREFCLK - bitmasks */
+#define OTGREFCLK_STB_CLK_SWITCH_EN	BIT(31)
+
+/* SUPS_CTRL - bitmasks */
+#define SUSP_CTRL_SUSPEND_RESIDENCY_ENABLE	BIT(17)
+
+/* OVERRIDE - bitmasks */
+#define OVERRIDE_IDPULLUP		BIT(0)
+/* Only for CDNS3_CONTROLLER_V0 version */
+#define OVERRIDE_IDPULLUP_V0		BIT(24)
+/* Vbusvalid/Sesvalid override select. */
+#define OVERRIDE_SESS_VLD_SEL		BIT(10)
+
+/* PHYRST_CFG - bitmasks */
+#define PHYRST_CFG_PHYRST_A_ENABLE     BIT(0)
+
+#define CDNS3_ID_PERIPHERAL		1
+#define CDNS3_ID_HOST			0
+
+bool cdns_is_host(struct cdns *cdns);
+bool cdns_is_device(struct cdns *cdns);
+int cdns_get_id(struct cdns *cdns);
+int cdns_get_vbus(struct cdns *cdns);
+void cdns_clear_vbus(struct cdns *cdns);
+void cdns_set_vbus(struct cdns *cdns);
+int cdns_drd_init(struct cdns *cdns);
+int cdns_drd_exit(struct cdns *cdns);
+int cdns_drd_update_mode(struct cdns *cdns);
+int cdns_drd_gadget_on(struct cdns *cdns);
+void cdns_drd_gadget_off(struct cdns *cdns);
+int cdns_drd_host_on(struct cdns *cdns);
+void cdns_drd_host_off(struct cdns *cdns);
+bool cdns_power_is_lost(struct cdns *cdns);
+#endif /* __LINUX_CDNS3_DRD */
diff --git a/drivers/usb/cdns3/gadget-export.h b/drivers/usb/cdns3/gadget-export.h
new file mode 100644
index 000000000..60c3177db
--- /dev/null
+++ b/drivers/usb/cdns3/gadget-export.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Cadence USBSS and USBSSP DRD Driver - Gadget Export APIs.
+ *
+ * Copyright (C) 2017 NXP
+ * Copyright (C) 2017-2018 NXP
+ *
+ * Authors: Peter Chen <peter.chen@nxp.com>
+ */
+#ifndef __LINUX_CDNS3_GADGET_EXPORT
+#define __LINUX_CDNS3_GADGET_EXPORT
+
+#if IS_ENABLED(CONFIG_USB_CDNS3_GADGET)
+
+int cdnsp_gadget_init(struct cdns *cdns);
+int cdns3_gadget_init(struct cdns *cdns);
+#else
+
+static inline int cdnsp_gadget_init(struct cdns *cdns)
+{
+	return -ENXIO;
+}
+
+static inline int cdns3_gadget_init(struct cdns *cdns)
+{
+	return -ENXIO;
+}
+
+#endif /* CONFIG_USB_CDNS3_GADGET */
+
+#endif /* __LINUX_CDNS3_GADGET_EXPORT */
diff --git a/drivers/usb/cdns3/host-export.h b/drivers/usb/cdns3/host-export.h
new file mode 100644
index 000000000..34fd1f1ad
--- /dev/null
+++ b/drivers/usb/cdns3/host-export.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Cadence USBSS and USBSSP DRD Driver - Host Export APIs
+ *
+ * Copyright (C) 2017-2018 NXP
+ *
+ * Authors: Peter Chen <peter.chen@nxp.com>
+ */
+#ifndef __LINUX_CDNS3_HOST_EXPORT
+#define __LINUX_CDNS3_HOST_EXPORT
+
+#if IS_ENABLED(CONFIG_USB_CDNS3_HOST)
+
+int cdns_host_init(struct cdns *cdns);
+
+#else
+
+static inline int cdns_host_init(struct cdns *cdns)
+{
+	return -ENXIO;
+}
+
+static inline void cdns_host_exit(struct cdns *cdns) { }
+
+#endif /* CONFIG_USB_CDNS3_HOST */
+
+#endif /* __LINUX_CDNS3_HOST_EXPORT */
diff --git a/drivers/usb/cdns3/host.c b/drivers/usb/cdns3/host.c
new file mode 100644
index 000000000..f0df114c2
--- /dev/null
+++ b/drivers/usb/cdns3/host.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence USBSS and USBSSP DRD Driver - host side
+ *
+ * Copyright (C) 2018-2019 Cadence Design Systems.
+ * Copyright (C) 2017-2018 NXP
+ *
+ * Authors: Peter Chen <peter.chen@nxp.com>
+ *          Pawel Laszczak <pawell@cadence.com>
+ */
+
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include "core.h"
+#include "drd.h"
+#include "host-export.h"
+#include <linux/usb/hcd.h>
+#include "../host/xhci.h"
+#include "../host/xhci-plat.h"
+
+/*
+ * The XECP_PORT_CAP_REG and XECP_AUX_CTRL_REG1 exist only
+ * in Cadence USB3 dual-role controller, so it can't be used
+ * with Cadence CDNSP dual-role controller.
+ */
+#define XECP_PORT_CAP_REG	0x8000
+#define XECP_AUX_CTRL_REG1	0x8120
+
+#define CFG_RXDET_P3_EN		BIT(15)
+#define LPM_2_STB_SWITCH_EN	BIT(25)
+
+static void xhci_cdns3_plat_start(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	u32 value;
+
+	/* set usbcmd.EU3S */
+	value = readl(&xhci->op_regs->command);
+	value |= CMD_PM_INDEX;
+	writel(value, &xhci->op_regs->command);
+
+	if (hcd->regs) {
+		value = readl(hcd->regs + XECP_AUX_CTRL_REG1);
+		value |= CFG_RXDET_P3_EN;
+		writel(value, hcd->regs + XECP_AUX_CTRL_REG1);
+
+		value = readl(hcd->regs + XECP_PORT_CAP_REG);
+		value |= LPM_2_STB_SWITCH_EN;
+		writel(value, hcd->regs + XECP_PORT_CAP_REG);
+	}
+}
+
+static int xhci_cdns3_resume_quirk(struct usb_hcd *hcd)
+{
+	xhci_cdns3_plat_start(hcd);
+	return 0;
+}
+
+static const struct xhci_plat_priv xhci_plat_cdns3_xhci = {
+	.quirks = XHCI_SKIP_PHY_INIT | XHCI_AVOID_BEI,
+	.plat_start = xhci_cdns3_plat_start,
+	.resume_quirk = xhci_cdns3_resume_quirk,
+};
+
+static const struct xhci_plat_priv xhci_plat_cdnsp_xhci = {
+	.quirks = XHCI_CDNS_SCTX_QUIRK,
+};
+
+static int __cdns_host_init(struct cdns *cdns)
+{
+	struct platform_device *xhci;
+	int ret;
+	struct usb_hcd *hcd;
+
+	cdns_drd_host_on(cdns);
+
+	xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO);
+	if (!xhci) {
+		dev_err(cdns->dev, "couldn't allocate xHCI device\n");
+		return -ENOMEM;
+	}
+
+	xhci->dev.parent = cdns->dev;
+	cdns->host_dev = xhci;
+
+	ret = platform_device_add_resources(xhci, cdns->xhci_res,
+					    CDNS_XHCI_RESOURCES_NUM);
+	if (ret) {
+		dev_err(cdns->dev, "couldn't add resources to xHCI device\n");
+		goto err1;
+	}
+
+	if (cdns->version < CDNSP_CONTROLLER_V2)
+		cdns->xhci_plat_data = kmemdup(&xhci_plat_cdns3_xhci,
+				sizeof(struct xhci_plat_priv), GFP_KERNEL);
+	else
+		cdns->xhci_plat_data = kmemdup(&xhci_plat_cdnsp_xhci,
+				sizeof(struct xhci_plat_priv), GFP_KERNEL);
+
+	if (!cdns->xhci_plat_data) {
+		ret = -ENOMEM;
+		goto err1;
+	}
+
+	if (cdns->pdata && (cdns->pdata->quirks & CDNS3_DEFAULT_PM_RUNTIME_ALLOW))
+		cdns->xhci_plat_data->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
+
+	ret = platform_device_add_data(xhci, cdns->xhci_plat_data,
+			sizeof(struct xhci_plat_priv));
+	if (ret)
+		goto free_memory;
+
+	ret = platform_device_add(xhci);
+	if (ret) {
+		dev_err(cdns->dev, "failed to register xHCI device\n");
+		goto free_memory;
+	}
+
+	/* Glue needs to access xHCI region register for Power management */
+	hcd = platform_get_drvdata(xhci);
+	if (hcd)
+		cdns->xhci_regs = hcd->regs;
+
+	return 0;
+
+free_memory:
+	kfree(cdns->xhci_plat_data);
+err1:
+	platform_device_put(xhci);
+	return ret;
+}
+
+static void cdns_host_exit(struct cdns *cdns)
+{
+	kfree(cdns->xhci_plat_data);
+	platform_device_unregister(cdns->host_dev);
+	cdns->host_dev = NULL;
+	cdns_drd_host_off(cdns);
+}
+
+static int cdns_host_resume(struct cdns *cdns, bool power_lost)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(cdns->host_dev);
+	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
+
+	priv->power_lost = power_lost;
+
+	return 0;
+}
+
+int cdns_host_init(struct cdns *cdns)
+{
+	struct cdns_role_driver *rdrv;
+
+	rdrv = devm_kzalloc(cdns->dev, sizeof(*rdrv), GFP_KERNEL);
+	if (!rdrv)
+		return -ENOMEM;
+
+	rdrv->start	= __cdns_host_init;
+	rdrv->stop	= cdns_host_exit;
+	rdrv->resume	= cdns_host_resume;
+	rdrv->state	= CDNS_ROLE_STATE_INACTIVE;
+	rdrv->name	= "host";
+
+	cdns->roles[USB_ROLE_HOST] = rdrv;
+
+	return 0;
+}