drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 168 insertions, 0 deletions

diff --git a/drivers/usb/cdns3/host.c b/drivers/usb/cdns3/host.c
new file mode 100644
index 000000000..f0df114c2
--- /dev/null
+++ b/drivers/usb/cdns3/host.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence USBSS and USBSSP DRD Driver - host side
+ *
+ * Copyright (C) 2018-2019 Cadence Design Systems.
+ * Copyright (C) 2017-2018 NXP
+ *
+ * Authors: Peter Chen <peter.chen@nxp.com>
+ *          Pawel Laszczak <pawell@cadence.com>
+ */
+
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include "core.h"
+#include "drd.h"
+#include "host-export.h"
+#include <linux/usb/hcd.h>
+#include "../host/xhci.h"
+#include "../host/xhci-plat.h"
+
+/*
+ * The XECP_PORT_CAP_REG and XECP_AUX_CTRL_REG1 exist only
+ * in Cadence USB3 dual-role controller, so it can't be used
+ * with Cadence CDNSP dual-role controller.
+ */
+#define XECP_PORT_CAP_REG	0x8000
+#define XECP_AUX_CTRL_REG1	0x8120
+
+#define CFG_RXDET_P3_EN		BIT(15)
+#define LPM_2_STB_SWITCH_EN	BIT(25)
+
+static void xhci_cdns3_plat_start(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	u32 value;
+
+	/* set usbcmd.EU3S */
+	value = readl(&xhci->op_regs->command);
+	value |= CMD_PM_INDEX;
+	writel(value, &xhci->op_regs->command);
+
+	if (hcd->regs) {
+		value = readl(hcd->regs + XECP_AUX_CTRL_REG1);
+		value |= CFG_RXDET_P3_EN;
+		writel(value, hcd->regs + XECP_AUX_CTRL_REG1);
+
+		value = readl(hcd->regs + XECP_PORT_CAP_REG);
+		value |= LPM_2_STB_SWITCH_EN;
+		writel(value, hcd->regs + XECP_PORT_CAP_REG);
+	}
+}
+
+static int xhci_cdns3_resume_quirk(struct usb_hcd *hcd)
+{
+	xhci_cdns3_plat_start(hcd);
+	return 0;
+}
+
+static const struct xhci_plat_priv xhci_plat_cdns3_xhci = {
+	.quirks = XHCI_SKIP_PHY_INIT | XHCI_AVOID_BEI,
+	.plat_start = xhci_cdns3_plat_start,
+	.resume_quirk = xhci_cdns3_resume_quirk,
+};
+
+static const struct xhci_plat_priv xhci_plat_cdnsp_xhci = {
+	.quirks = XHCI_CDNS_SCTX_QUIRK,
+};
+
+static int __cdns_host_init(struct cdns *cdns)
+{
+	struct platform_device *xhci;
+	int ret;
+	struct usb_hcd *hcd;
+
+	cdns_drd_host_on(cdns);
+
+	xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO);
+	if (!xhci) {
+		dev_err(cdns->dev, "couldn't allocate xHCI device\n");
+		return -ENOMEM;
+	}
+
+	xhci->dev.parent = cdns->dev;
+	cdns->host_dev = xhci;
+
+	ret = platform_device_add_resources(xhci, cdns->xhci_res,
+					    CDNS_XHCI_RESOURCES_NUM);
+	if (ret) {
+		dev_err(cdns->dev, "couldn't add resources to xHCI device\n");
+		goto err1;
+	}
+
+	if (cdns->version < CDNSP_CONTROLLER_V2)
+		cdns->xhci_plat_data = kmemdup(&xhci_plat_cdns3_xhci,
+				sizeof(struct xhci_plat_priv), GFP_KERNEL);
+	else
+		cdns->xhci_plat_data = kmemdup(&xhci_plat_cdnsp_xhci,
+				sizeof(struct xhci_plat_priv), GFP_KERNEL);
+
+	if (!cdns->xhci_plat_data) {
+		ret = -ENOMEM;
+		goto err1;
+	}
+
+	if (cdns->pdata && (cdns->pdata->quirks & CDNS3_DEFAULT_PM_RUNTIME_ALLOW))
+		cdns->xhci_plat_data->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
+
+	ret = platform_device_add_data(xhci, cdns->xhci_plat_data,
+			sizeof(struct xhci_plat_priv));
+	if (ret)
+		goto free_memory;
+
+	ret = platform_device_add(xhci);
+	if (ret) {
+		dev_err(cdns->dev, "failed to register xHCI device\n");
+		goto free_memory;
+	}
+
+	/* Glue needs to access xHCI region register for Power management */
+	hcd = platform_get_drvdata(xhci);
+	if (hcd)
+		cdns->xhci_regs = hcd->regs;
+
+	return 0;
+
+free_memory:
+	kfree(cdns->xhci_plat_data);
+err1:
+	platform_device_put(xhci);
+	return ret;
+}
+
+static void cdns_host_exit(struct cdns *cdns)
+{
+	kfree(cdns->xhci_plat_data);
+	platform_device_unregister(cdns->host_dev);
+	cdns->host_dev = NULL;
+	cdns_drd_host_off(cdns);
+}
+
+static int cdns_host_resume(struct cdns *cdns, bool power_lost)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(cdns->host_dev);
+	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
+
+	priv->power_lost = power_lost;
+
+	return 0;
+}
+
+int cdns_host_init(struct cdns *cdns)
+{
+	struct cdns_role_driver *rdrv;
+
+	rdrv = devm_kzalloc(cdns->dev, sizeof(*rdrv), GFP_KERNEL);
+	if (!rdrv)
+		return -ENOMEM;
+
+	rdrv->start	= __cdns_host_init;
+	rdrv->stop	= cdns_host_exit;
+	rdrv->resume	= cdns_host_resume;
+	rdrv->state	= CDNS_ROLE_STATE_INACTIVE;
+	rdrv->name	= "host";
+
+	cdns->roles[USB_ROLE_HOST] = rdrv;
+
+	return 0;
+}